ACE TX 130 vs Escorts HYDRA 14: the two differ on 46 of 53 listed specs. The main differences are Engine (Mahindra 47.5 HP vs E-Kubota 50 HP), Operating Weight (12960 kg vs 11750 kg), Fuel Tank (85 L vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE TX 130
Escorts HYDRA 14
ACE TX 130
VS
Escorts HYDRA 14
Crane
ACE TX 130 vs Escorts HYDRA 14: the two differ on 46 of 53 listed specs. The main differences are Engine (Mahindra 47.5 HP vs E-Kubota 50 HP), Operating Weight (12960 kg vs 11750 kg), Fuel Tank (85 L vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE TX 130
₹ 31 - 33 Lakhs
Escorts HYDRA 14
₹20.5 Lakh Onwards*
Particulars
ACE TX 130
Escorts HYDRA 14
ACE TX 130 vs Escorts HYDRA 14: Which One to Buy?
The ACE TX 130 lifts 13 tonnes and is built narrow and easy to steer, which helps it work in tight fabrication yards and city sites. The Escorts HYDRA 14 lifts a little more at 14 tonnes, reaches higher with its four-part boom, and turns through a wider angle for tricky lifts.
If your work is mostly in narrow lanes or crowded urban sites, the ACE TX 130's smaller width and tighter turning make it easier to place. If you need a bit more lift height and lifting weight for infrastructure sites, the Escorts HYDRA 14 gives you that extra reach. Browse the full ACE crane range, the Escorts crane range, all mobile cranes, or read our crane buying guide.
ACE TX 130 Hydraulic Crane
Pros:
13-tonne lifting capacity suitable for metro zones and fabrication sites
Equipped with Mahindra 4485 IAE (BS-III CEV) 4-cylinder diesel engine
Maximum speed of 28 km/h without load
Three-part slotted boom with hydraulically operated synchronized extensions
Enhanced power steering system with orbitrol and twin hydraulic double-acting cylinders
Cons:
Lower engine power compared to HYDRA 14 (47.5 HP vs 50 HP)
Smaller fuel tank capacity (85 L compared to 38 L in HYDRA 14, but HYDRA has lower capacity)
Less articulated range compared to HYDRA 14 (45° vs 48°)
Escorts HYDRA 14 Ton Crane
Pros:
14-tonne lifting capacity ideal for heavy machinery movement in infrastructure environments
Higher engine power with Escorts Kubota E4.391NA 50 HP engine
4-part boom offering more extended reach with a maximum height of 15.1 m
Greater articulation range for maneuvering (up to 48°)
Robust transmission developed especially for crane applications
Cons:
Higher minimum turning radius than ACE TX 130 (7000 mm vs 6500 mm)
Larger overall width could challenge maneuverability in tight spaces (2550 mm vs 2400 mm)
Lower fuel efficiency could be implied by larger engine and more powerful output
Pros:
Cons:
Closing Recommendation
Both these cranes suit fabrication and infrastructure work. Choose the Escorts HYDRA 14 when you need higher lifting capacity, more boom reach and a wider turning angle for infrastructure sites. Choose the ACE TX 130 when your work is in narrow lanes or crowded urban sites where easy steering and a smaller turning radius matter more. So match the machine to your work: Escorts HYDRA 14 for heavier lifts with more reach, ACE TX 130 for tight, narrow work sites.
ACE TX 130 Vs Escorts HYDRA 14 Crane Price, Technical Specifications & Features
The ACE TX 130 is a 13-ton pick-and-carry crane built for truck-mounted mobility and quick deployment at construction and industrial sites in India. Powered by a Mahindra diesel engine that produces 47.5 HP, it combines road mobility with strong hydraulic lifting performance. With a rated lifting capacity of 13 tonnes and a boom that extends to 12.8 metres, it handles a wide range of lifting tasks. The truck-mounted design significantly reduces repositioning time on multi-point project sites. Smart hydraulic controls minimize pressure spikes and improve load accuracy during placement. The ACE TX 130 crane price in India falls between ₹31 lakh and ₹33 lakh, based on specifications and delivery location. This 13-ton pick-and-carry crane from ACE Construction Equipment is well-suited for contractors, infrastructure developers, and specialized crane rental operations.
The Escorts Hydra 14 is a 14-ton hydra crane built for construction, precast handling, and heavy industrial lifting across India. It features an E-Kubota diesel engine that generates 50 HP, powering an efficient hydraulic system for effective load cycles. With a lifting capacity of 14 tonnes and a boom length of 15.1 metres, the Hydra 14 crane from Escorts Kubota Construction Equipment can handle tall-structure lifts easily. The reinforced outrigger system provides excellent stability on soft or uneven ground. Its fuel-efficient operation at full capacity makes it a valuable asset for long-term projects. The Escorts Hydra 14 crane price in India starts at ₹20.5 Lakh onwards, based on model variant and region. This Escorts crane is a solid investment for contractors, EPC companies, and crane rental operators.
ACE TX 130 vs Escorts HYDRA 14: Which One to Buy?
The ACE TX 130 lifts 13 tonnes and is built narrow and easy to steer, which helps it work in tight fabrication yards and city sites. The Escorts HYDRA 14 lifts a little more at 14 tonnes, reaches higher with its four-part boom, and turns through a wider angle for tricky lifts.
If your work is mostly in narrow lanes or crowded urban sites, the ACE TX 130's smaller width and tighter turning make it easier to place. If you need a bit more lift height and lifting weight for infrastructure sites, the Escorts HYDRA 14 gives you that extra reach. Browse the full ACE crane range, the Escorts crane range, all mobile cranes, or read our crane buying guide.
ACE TX 130 Hydraulic Crane
Pros:
13-tonne lifting capacity suitable for metro zones and fabrication sites
Equipped with Mahindra 4485 IAE (BS-III CEV) 4-cylinder diesel engine
Maximum speed of 28 km/h without load
Three-part slotted boom with hydraulically operated synchronized extensions
Enhanced power steering system with orbitrol and twin hydraulic double-acting cylinders
Cons:
Lower engine power compared to HYDRA 14 (47.5 HP vs 50 HP)
Smaller fuel tank capacity (85 L compared to 38 L in HYDRA 14, but HYDRA has lower capacity)
Less articulated range compared to HYDRA 14 (45° vs 48°)
Escorts HYDRA 14 Ton Crane
Pros:
14-tonne lifting capacity ideal for heavy machinery movement in infrastructure environments
Higher engine power with Escorts Kubota E4.391NA 50 HP engine
4-part boom offering more extended reach with a maximum height of 15.1 m
Greater articulation range for maneuvering (up to 48°)
Robust transmission developed especially for crane applications
Cons:
Higher minimum turning radius than ACE TX 130 (7000 mm vs 6500 mm)
Larger overall width could challenge maneuverability in tight spaces (2550 mm vs 2400 mm)
Lower fuel efficiency could be implied by larger engine and more powerful output
Pros:
Cons:
Closing Recommendation
Both these cranes suit fabrication and infrastructure work. Choose the Escorts HYDRA 14 when you need higher lifting capacity, more boom reach and a wider turning angle for infrastructure sites. Choose the ACE TX 130 when your work is in narrow lanes or crowded urban sites where easy steering and a smaller turning radius matter more. So match the machine to your work: Escorts HYDRA 14 for heavier lifts with more reach, ACE TX 130 for tight, narrow work sites.
ACE TX 130 Vs Escorts HYDRA 14 Crane Price, Technical Specifications & Features
The ACE TX 130 is a 13-ton pick-and-carry crane built for truck-mounted mobility and quick deployment at construction and industrial sites in India. Powered by a Mahindra diesel engine that produces 47.5 HP, it combines road mobility with strong hydraulic lifting performance. With a rated lifting capacity of 13 tonnes and a boom that extends to 12.8 metres, it handles a wide range of lifting tasks. The truck-mounted design significantly reduces repositioning time on multi-point project sites. Smart hydraulic controls minimize pressure spikes and improve load accuracy during placement. The ACE TX 130 crane price in India falls between ₹31 lakh and ₹33 lakh, based on specifications and delivery location. This 13-ton pick-and-carry crane from ACE Construction Equipment is well-suited for contractors, infrastructure developers, and specialized crane rental operations.
The Escorts Hydra 14 is a 14-ton hydra crane built for construction, precast handling, and heavy industrial lifting across India. It features an E-Kubota diesel engine that generates 50 HP, powering an efficient hydraulic system for effective load cycles. With a lifting capacity of 14 tonnes and a boom length of 15.1 metres, the Hydra 14 crane from Escorts Kubota Construction Equipment can handle tall-structure lifts easily. The reinforced outrigger system provides excellent stability on soft or uneven ground. Its fuel-efficient operation at full capacity makes it a valuable asset for long-term projects. The Escorts Hydra 14 crane price in India starts at ₹20.5 Lakh onwards, based on model variant and region. This Escorts crane is a solid investment for contractors, EPC companies, and crane rental operators.
46 differ · 7 identical
Key highlights: ACE TX 130 vs Escorts HYDRA 14 Crane
ACE TX 130
Escorts HYDRA 14
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Articulation
45°
Up to 48°
Max. Speed
28 km/h
29 km/h
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Overall Length
NA
11640 mm
Overall Width
2400 mm
2550 mm
Wheelbase
4600 mm
4880 mm
Boom Luffing Range
-3° to +70°
-5° to + 55°
Warranty
1 Year
1 Year
Key highlights: ACE TX 130 vs Escorts HYDRA 14 Crane
ACE TX 130
Escorts HYDRA 14
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Articulation
45°
Up to 48°
Max. Speed
28 km/h
29 km/h
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Overall Length
NA
11640 mm
Overall Width
2400 mm
2550 mm
Wheelbase
4600 mm
4880 mm
Boom Luffing Range
-3° to +70°
-5° to + 55°
Warranty
1 Year
1 Year
Full specifications: ACE TX 130 vs Escorts HYDRA 14 Crane
Engine
ACE TX 130
Escorts HYDRA 14
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine.
CEV Stage V, 4 cylinders, Naturally Aspirated, Electronic, Common Rail Direct Injection
Max Power
47.5 HP (34.9 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V, Negative Earth, 88 Ah
Alternator
35A
NA
Lifting Capacity
ACE TX 130
Escorts HYDRA 14
Max. Lifting Capacity
13 Tonnes
14 Tonnes
Transmission & Clutch
ACE TX 130
Escorts HYDRA 14
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy duty transmission with 6 forward and 2 reverse speeds with high low range selector
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering System
ACE TX 130
Escorts HYDRA 14
Steering Type
Power steering through orbitrol with twin hydraulic double-acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
45°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE TX 130
Escorts HYDRA 14
Hoist
4 falls; Hydraulic winch; Rope dia 13 mm fitted with self adjusting hook block.
6 Falls, Hydraulic winch 12 t capacity with in-built safety brakes
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE TX 130
Escorts HYDRA 14
Front Wheels
Pneumatically assisted hydraulic brakes on front wheels are actuated through a single pedal.
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Air-operated disc brakes on the rear wheel are actuated through a single pedal.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE TX 130
Escorts HYDRA 14
Engine Oil
8.0 L
NA
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Transmission Oil
48 L
NA
Overall Dimensions & Weight
ACE TX 130
Escorts HYDRA 14
Overall Length With Bucket
NA
11640 mm
Overall Width
2400 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4600 mm
4880 mm
Operating Weight
12960 kg
11750 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
11.00 x 20-16 PR (4 Nos.)
11.00 x 20-16 PR (4 Nos.)
Rear Tyres
13.00 x 24-12 PR (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE TX 130
Escorts HYDRA 14
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions
4 parts; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Through one double-acting extension cylinder
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-3° to +70°
-5° to + 55°
Boom Height
12.8 m
15.1 m
Full specifications: ACE TX 130 vs Escorts HYDRA 14 Crane
Engine
ACE TX 130
Escorts HYDRA 14
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine.
CEV Stage V, 4 cylinders, Naturally Aspirated, Electronic, Common Rail Direct Injection
Max Power
47.5 HP (34.9 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V, Negative Earth, 88 Ah
Alternator
35A
NA
Lifting Capacity
ACE TX 130
Escorts HYDRA 14
Max. Lifting Capacity
13 Tonnes
14 Tonnes
Transmission Clutch
ACE TX 130
Escorts HYDRA 14
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy duty transmission with 6 forward and 2 reverse speeds with high low range selector
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering
ACE TX 130
Escorts HYDRA 14
Steering Type
Power steering through orbitrol with twin hydraulic double-acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
45°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE TX 130
Escorts HYDRA 14
Hoist
4 falls; Hydraulic winch; Rope dia 13 mm fitted with self adjusting hook block.
6 Falls, Hydraulic winch 12 t capacity with in-built safety brakes
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE TX 130
Escorts HYDRA 14
Front Wheels
Pneumatically assisted hydraulic brakes on front wheels are actuated through a single pedal.
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Air-operated disc brakes on the rear wheel are actuated through a single pedal.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE TX 130
Escorts HYDRA 14
Engine Oil
8.0 L
NA
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Transmission Oil
48 L
NA
Overall Dimension And Weight
ACE TX 130
Escorts HYDRA 14
Overall Length With Bucket
NA
11640 mm
Overall Width
2400 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4600 mm
4880 mm
Operating Weight
12960 kg
11750 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
11.00 x 20-16 PR (4 Nos.)
11.00 x 20-16 PR (4 Nos.)
Rear Tyres
13.00 x 24-12 PR (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE TX 130
Escorts HYDRA 14
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions
4 parts; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Questions buyers ask about the ACE TX 130 vs Escorts HYDRA 14
Ans.
The ACE TX 130 works better in tight or narrow sites. It is narrower and has a smaller turning radius than the Escorts HYDRA 14, so it moves and turns more easily in crowded yards and narrow lanes.
Ans.
The Escorts HYDRA 14 lifts more weight. It has a 14-tonne lifting capacity against the ACE TX 130's 13 tonnes, so it suits jobs that need that extra margin.
Ans.
The Escorts HYDRA 14 has better reach. Its four-part boom extends to a maximum height of 15.1 metres, giving it more working height than the ACE TX 130's three-part boom.
Ans.
The Escorts HYDRA 14 has more engine power, at 50 HP against the ACE TX 130's 47.5 HP. This gives it a bit more strength when lifting near its full rated capacity.
Ans.
The ACE TX 130 is easier to steer. It comes with power steering and a tighter turning radius, which helps the driver place loads more precisely in busy areas.
Ans.
The Escorts HYDRA 14 can turn through a wider angle. Its articulation range goes up to 48 degrees, a bit more than the ACE TX 130's 45 degrees, which helps when placing loads at odd angles.
ACE TX 130 Vs Escorts HYDRA 14 - Compare Price & Availability Across 600+ Locations in India
Compare ACE TX 130 Vs Escorts HYDRA 14 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
