ACE TX 130 vs Escorts HYDRA 15: the two differ on 46 of 53 listed specs. The main differences are Engine (Mahindra 47.5 HP vs E-Kubota 50 HP), Operating Weight (12960 kg vs 12050 kg), Fuel Tank (85 L vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE TX 130
Escorts HYDRA 15
ACE TX 130
VS
Escorts HYDRA 15
Crane
ACE TX 130 vs Escorts HYDRA 15: the two differ on 46 of 53 listed specs. The main differences are Engine (Mahindra 47.5 HP vs E-Kubota 50 HP), Operating Weight (12960 kg vs 12050 kg), Fuel Tank (85 L vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE TX 130
₹ 31 - 33 Lakhs
Escorts HYDRA 15
₹21.0 Lakh Onwards*
Particulars
ACE TX 130
Escorts HYDRA 15
ACE TX 130 vs Escorts HYDRA 15: Which One to Buy?
These two cranes come from different makers, so before you compare specs, think about which brand's dealer and service network sits closer to your work sites, since that shapes your day-to-day uptime more than any single number. The ACE TX 130 carries a better power-to-weight ratio and bigger fuel and hydraulic tanks, useful for owner-operators who want fewer stops during a shift. The Escorts HYDRA 15 lifts a bit more, reaches higher with its four-part boom, and adds a creep speed setting for careful, slow placement of loads.
An individual owner-operator who values simple daily running and fewer refuelling breaks will lean toward the TX 130. A contractor placing heavy equipment that needs slow, precise movement will value the HYDRA 15's creep speed and extra reach. See the full ACE crane range, the Escorts crane range, all mobile cranes, or read our crane buying guide.
ACE TX 130 Technical Specifications
Pros:
Performs precise 13-ton lifting suited for metros and fabrication sites
Powerful Mahindra 4485 IAE engine with 47.5 HP
Higher engine power-to-weight ratio
Has a 3-part telescoping slotted boom
Relatively larger fuel and hydraulic tanks
Cons:
Lower maximum lifting capacity compared to Escorts HYDRA 15
Shorter maximum boom height
Less articulated steering range
Escorts HYDRA 15 Technical Specifications
Pros:
15-ton lifting capacity appropriate for large equipment placement
Escorts Kubota engine tailored for crane applications
Includes creep speed for better maneuverability
Advanced 4 parts telescoping boom, enhancing reach
Greater maximum boom height
Cons:
Lower engine power-to-weight ratio compared to ACE TX 130
Smaller fuel and hydraulic tanks
Narrower overall width than ACE TX 130
Pros:
Cons:
Closing Recommendation
Both the ACE TX 130 and Escorts HYDRA 15 are built for lifting and placing heavy loads on site. Choose the ACE TX 130 when you want better power-to-weight performance, bigger tanks for longer runs, and easier day-to-day handling for an owner-operator. Choose the Escorts HYDRA 15 when your jobs need a bit more lifting capacity, a longer boom reach, and a creep speed for careful, precise placement. So match the machine to your work: ACE TX 130 for efficient daily lifting, Escorts HYDRA 15 for taller reach and slow, controlled placement.
ACE TX 130 Vs Escorts HYDRA 15 Crane Price, Technical Specifications & Features
The ACE TX 130 is a 13-ton pick-and-carry crane built for truck-mounted mobility and quick deployment at construction and industrial sites in India. Powered by a Mahindra diesel engine that produces 47.5 HP, it combines road mobility with strong hydraulic lifting performance. With a rated lifting capacity of 13 tonnes and a boom that extends to 12.8 metres, it handles a wide range of lifting tasks. The truck-mounted design significantly reduces repositioning time on multi-point project sites. Smart hydraulic controls minimize pressure spikes and improve load accuracy during placement. The ACE TX 130 crane price in India falls between ₹31 lakh and ₹33 lakh, based on specifications and delivery location. This 13-ton pick-and-carry crane from ACE Construction Equipment is well-suited for contractors, infrastructure developers, and specialized crane rental operations.
Designed for heavy-duty projects, the Escorts Hydra 15 is a 15-ton pick and carry crane ideal for infrastructure, industrial, and port lifting applications across India. It operates on an E-Kubota diesel engine that delivers 50 HP and features a responsive hydraulic circuit. The Hydra 15 can lift 15 tonnes at a rated radius and extends its boom to 19.15 metres for elevated lifts. Wide-base outriggers and a strong chassis provide outstanding load stability. Its efficient hydraulic system reduces energy loss and increases lifting cycles per shift. The Escorts Hydra 15 crane price in India starts at ₹21.0 Lakh onwards*, depending on configuration and region. This Escorts crane is perfect for large contractors, infrastructure EPC firms, and organized crane rental fleets.
ACE TX 130 vs Escorts HYDRA 15: Which One to Buy?
These two cranes come from different makers, so before you compare specs, think about which brand's dealer and service network sits closer to your work sites, since that shapes your day-to-day uptime more than any single number. The ACE TX 130 carries a better power-to-weight ratio and bigger fuel and hydraulic tanks, useful for owner-operators who want fewer stops during a shift. The Escorts HYDRA 15 lifts a bit more, reaches higher with its four-part boom, and adds a creep speed setting for careful, slow placement of loads.
An individual owner-operator who values simple daily running and fewer refuelling breaks will lean toward the TX 130. A contractor placing heavy equipment that needs slow, precise movement will value the HYDRA 15's creep speed and extra reach. See the full ACE crane range, the Escorts crane range, all mobile cranes, or read our crane buying guide.
ACE TX 130 Technical Specifications
Pros:
Performs precise 13-ton lifting suited for metros and fabrication sites
Powerful Mahindra 4485 IAE engine with 47.5 HP
Higher engine power-to-weight ratio
Has a 3-part telescoping slotted boom
Relatively larger fuel and hydraulic tanks
Cons:
Lower maximum lifting capacity compared to Escorts HYDRA 15
Shorter maximum boom height
Less articulated steering range
Escorts HYDRA 15 Technical Specifications
Pros:
15-ton lifting capacity appropriate for large equipment placement
Escorts Kubota engine tailored for crane applications
Includes creep speed for better maneuverability
Advanced 4 parts telescoping boom, enhancing reach
Greater maximum boom height
Cons:
Lower engine power-to-weight ratio compared to ACE TX 130
Smaller fuel and hydraulic tanks
Narrower overall width than ACE TX 130
Pros:
Cons:
Closing Recommendation
Both the ACE TX 130 and Escorts HYDRA 15 are built for lifting and placing heavy loads on site. Choose the ACE TX 130 when you want better power-to-weight performance, bigger tanks for longer runs, and easier day-to-day handling for an owner-operator. Choose the Escorts HYDRA 15 when your jobs need a bit more lifting capacity, a longer boom reach, and a creep speed for careful, precise placement. So match the machine to your work: ACE TX 130 for efficient daily lifting, Escorts HYDRA 15 for taller reach and slow, controlled placement.
ACE TX 130 Vs Escorts HYDRA 15 Crane Price, Technical Specifications & Features
The ACE TX 130 is a 13-ton pick-and-carry crane built for truck-mounted mobility and quick deployment at construction and industrial sites in India. Powered by a Mahindra diesel engine that produces 47.5 HP, it combines road mobility with strong hydraulic lifting performance. With a rated lifting capacity of 13 tonnes and a boom that extends to 12.8 metres, it handles a wide range of lifting tasks. The truck-mounted design significantly reduces repositioning time on multi-point project sites. Smart hydraulic controls minimize pressure spikes and improve load accuracy during placement. The ACE TX 130 crane price in India falls between ₹31 lakh and ₹33 lakh, based on specifications and delivery location. This 13-ton pick-and-carry crane from ACE Construction Equipment is well-suited for contractors, infrastructure developers, and specialized crane rental operations.
Designed for heavy-duty projects, the Escorts Hydra 15 is a 15-ton pick and carry crane ideal for infrastructure, industrial, and port lifting applications across India. It operates on an E-Kubota diesel engine that delivers 50 HP and features a responsive hydraulic circuit. The Hydra 15 can lift 15 tonnes at a rated radius and extends its boom to 19.15 metres for elevated lifts. Wide-base outriggers and a strong chassis provide outstanding load stability. Its efficient hydraulic system reduces energy loss and increases lifting cycles per shift. The Escorts Hydra 15 crane price in India starts at ₹21.0 Lakh onwards*, depending on configuration and region. This Escorts crane is perfect for large contractors, infrastructure EPC firms, and organized crane rental fleets.
46 differ · 7 identical
Key highlights: ACE TX 130 vs Escorts HYDRA 15 Crane
ACE TX 130
Escorts HYDRA 15
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Articulation
45°
Up to 48°
Max. Speed
28 km/h
29 km/h
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Overall Length
NA
11400 mm
Overall Width
2400 mm
2550 mm
Wheelbase
4600 mm
4880 mm
Boom Luffing Range
-3° to +70°
-5° to + 55°
Warranty
1 Year
1 Year
Key highlights: ACE TX 130 vs Escorts HYDRA 15 Crane
ACE TX 130
Escorts HYDRA 15
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Articulation
45°
Up to 48°
Max. Speed
28 km/h
29 km/h
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Overall Length
NA
11400 mm
Overall Width
2400 mm
2550 mm
Wheelbase
4600 mm
4880 mm
Boom Luffing Range
-3° to +70°
-5° to + 55°
Warranty
1 Year
1 Year
Full specifications: ACE TX 130 vs Escorts HYDRA 15 Crane
Engine
ACE TX 130
Escorts HYDRA 15
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine.
CEV Stage V, 4 cylinders, Naturally Aspirated, Electronic, Common Rail Direct Injection
Max Power
47.5 HP (34.9 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V, Negative Earth, 88 Ah
Alternator
35A
NA
Lifting Capacity
ACE TX 130
Escorts HYDRA 15
Max. Lifting Capacity
13 Tonnes
15 Tonnes
Transmission & Clutch
ACE TX 130
Escorts HYDRA 15
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy duty transmission with 6 forward and 2 reverse speeds with high low range selector
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering System
ACE TX 130
Escorts HYDRA 15
Steering Type
Power steering through orbitrol with twin hydraulic double-acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
45°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE TX 130
Escorts HYDRA 15
Hoist
4 falls; Hydraulic winch; Rope dia 13 mm fitted with self adjusting hook block.
6 Falls, Hydraulic winch 12 t capacity with in-built safety brakes
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE TX 130
Escorts HYDRA 15
Front Wheels
Pneumatically assisted hydraulic brakes on front wheels are actuated through a single pedal.
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Air-operated disc brakes on the rear wheel are actuated through a single pedal.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated
Hand control valve operated, Air-assisted parking brake at front wheels
Service Capacity
ACE TX 130
Escorts HYDRA 15
Engine Oil
8.0 L
NA
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Transmission Oil
48 L
NA
Overall Dimensions & Weight
ACE TX 130
Escorts HYDRA 15
Overall Length With Bucket
NA
11400 mm
Overall Width
2400 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4600 mm
4880 mm
Operating Weight
12960 kg
12050 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
11.00 x 20-16 PR (4 Nos.)
11.00 x 20-16 PR (4 Nos.)
Rear Tyres
13.00 x 24-12 PR (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE TX 130
Escorts HYDRA 15
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions
4 parts; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Through one double-acting extension cylinder
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-3° to +70°
-5° to + 55°
Boom Height
12.8 m
19.15 m
Full specifications: ACE TX 130 vs Escorts HYDRA 15 Crane
Engine
ACE TX 130
Escorts HYDRA 15
Engine Make
Mahindra 4485 IAE (BS-III CEV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine.
CEV Stage V, 4 cylinders, Naturally Aspirated, Electronic, Common Rail Direct Injection
Max Power
47.5 HP (34.9 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V, Negative Earth, 88 Ah
Alternator
35A
NA
Lifting Capacity
ACE TX 130
Escorts HYDRA 15
Max. Lifting Capacity
13 Tonnes
15 Tonnes
Transmission Clutch
ACE TX 130
Escorts HYDRA 15
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy duty transmission with 6 forward and 2 reverse speeds with high low range selector
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering
ACE TX 130
Escorts HYDRA 15
Steering Type
Power steering through orbitrol with twin hydraulic double-acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
45°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE TX 130
Escorts HYDRA 15
Hoist
4 falls; Hydraulic winch; Rope dia 13 mm fitted with self adjusting hook block.
6 Falls, Hydraulic winch 12 t capacity with in-built safety brakes
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE TX 130
Escorts HYDRA 15
Front Wheels
Pneumatically assisted hydraulic brakes on front wheels are actuated through a single pedal.
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Air-operated disc brakes on the rear wheel are actuated through a single pedal.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated
Hand control valve operated, Air-assisted parking brake at front wheels
Service Capacity
ACE TX 130
Escorts HYDRA 15
Engine Oil
8.0 L
NA
Fuel Tank
85 L
38 L
Hydraulic Tank
90 L
65 L
Transmission Oil
48 L
NA
Overall Dimension And Weight
ACE TX 130
Escorts HYDRA 15
Overall Length With Bucket
NA
11400 mm
Overall Width
2400 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4600 mm
4880 mm
Operating Weight
12960 kg
12050 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
11.00 x 20-16 PR (4 Nos.)
11.00 x 20-16 PR (4 Nos.)
Rear Tyres
13.00 x 24-12 PR (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE TX 130
Escorts HYDRA 15
Telescoping
Three-part slotted boom with hydraulically operated synchronized extensions
4 parts; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Questions buyers ask about the ACE TX 130 vs Escorts HYDRA 15
Ans.
The ACE TX 130 is generally easier for a first-time owner-operator. Its better power-to-weight ratio makes it feel responsive, and larger fuel and hydraulic tanks mean fewer mid-shift stops to top up.
Ans.
The Escorts HYDRA 15 gives finer control when placing heavy equipment. Its creep speed setting lets the driver move loads slowly and precisely, which matters when setting down machinery in a tight spot.
Ans.
The Escorts HYDRA 15 has a narrower overall width than the ACE TX 130, so it can pass through tighter gates and lanes on a crowded site more easily.
Ans.
Yes, it can. ACE and Escorts run separate dealer networks in India, so check which brand has a closer service point and better parts stock in your working area before you decide between the two.
Ans.
The ACE TX 130 needs fewer refuelling stops. Its fuel and hydraulic tanks are larger than the Escorts HYDRA 15's, so it can run longer between top-ups on a busy day.
ACE TX 130 Vs Escorts HYDRA 15 - Compare Price & Availability Across 600+ Locations in India
Compare ACE TX 130 Vs Escorts HYDRA 15 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
