Suno Sabki, Chuno Apni.
Contact Us



    Contact Info
    Chat with us

    BEML BG605A VS BEML BG825 Motor Grader

    BEML BG605A vs BEML BG825: the two differ on 65 of 79 listed specs. The main differences are Engine (BEML 170.3 HP vs BEML 280 HP), Price (₹ 85-95 Lakhs vs ₹ 1.5-1.8 Crores), Max Torque (785 Nm @ 1200 rpm vs NA), Weight (15800 kg vs 25750 kg). The other 14 specs are the same.

    Specs from OEM brochures · comparison updated Aug 2026

    BEML BG605A
    ₹ 85-95 Lakhs*

    BEML BG605A

    • Engine

      BEML 170.3 HP

    • Blade

      3665 mm

    • Weight

      15800 kg

    • Turning Radius

      7400 mm

    • Max Forward Speed

      44.2 km/hr

    • Max Reverse Speed

      31.3 km/hr
    Medium (12-20 Ton)
    BEML BG825
    ₹ 1.5-1.8 Crores*

    BEML BG825

    • Engine

      BEML 280 HP

    • Blade

      4928 mm

    • Weight

      25750 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      47.9 km/hr
    Large (>50 Ton)

    Add a third machine

    What's different: BEML BG605A vs BEML BG825

    65 specs differ, 14 are identical. The full tables are below.

    Spec BEML BG605A BEML BG825
    EngineBEML 170.3 HPBEML 280 HP
    Price₹ 85-95 Lakhs₹ 1.5-1.8 Crores
    Max Torque785 Nm @ 1200 rpmNA
    Weight15800 kg25750 kg
    Fuel Tank250 L500 L
    TypeMedium (12-20 Ton)Large (>50 Ton)
    Min. Turning Radius7400 mm7900 mm
    Max. Forward Speed44.2 km/hr44.9 km/hr

    See all 65 differences ↓

    BEML BG605A price & full specs →BEML BG825 price & full specs →

    * Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights BEML BG605ABEML BG825
    BEML BG605A VS BEML BG825 Motor Grader

    BEML BG605A vs BEML BG825: the two differ on 65 of 79 listed specs. The main differences are Engine (BEML 170.3 HP vs BEML 280 HP), Price (₹ 85-95 Lakhs vs ₹ 1.5-1.8 Crores), Max Torque (785 Nm @ 1200 rpm vs NA), Weight (15800 kg vs 25750 kg). The other 14 specs are the same.

    Specs from OEM brochures · comparison updated Aug 2026

    BEML 605 Motor Grader
    BEML BG605A

    ₹ 85-95 Lakhs

    BG825 Motor Grader
    BEML BG825

    ₹ 1.5-1.8 Crores

    Particulars BEML BG605A BEML BG825

    BEML BG605A vs BG825: Which Motor Grader Fits Your Road Job?

    The BEML BG605A and the BEML BG825 both grade roads, but they are built for different job sizes. The BG605A runs a 170.3 HP engine and has a tighter turning radius of 7400 mm, which makes it easy to handle on standard road work. The BG825 runs a much bigger 280 HP engine and carries a longer 4928 mm blade, built for large-scale grading jobs.

    A contractor working on smaller roads or routine maintenance may prefer the BG605A for its easier handling and lower fuel use. A company working on large highway or large-scale earthwork projects may need the BG825 for its higher power and longer blade. Both machines come from the same BEML dealer network in India. Browse the wider motor grader range or read the motor grader guide to match a machine to your project.

    BEML BG605A Motor Grader

    Pros:

    • Reliable for long-term road development tasks
    • Engine provides 170.3 HP which is adequate for standard grading tasks
    • Good turning radius of 7400 mm for maneuverability
    • Maximum forward speed of 44.2 km/hr aids in efficient operation

    Cons:

    • Blade length of 3665 mm may be insufficient for larger scale operations
    • Lacks advanced features such as an AC cabin and GPS
    • Maximum lifting height and cutting depth are less compared to the BG825 model

    BEML BG825 Motor Grader

    Pros:

    • High gross power of 280 HP for heavy and large-scale grading tasks
    • Longer blade length of 4928 mm for increased productivity
    • Advanced steering angle of 50° for superior maneuverability
    • Greater maximum reverse speed at 47.9 km/hr
    • Higher system pressure capability at 20.6 MPa for hydraulic operations

    Cons:

    • Significantly higher gross vehicle weight may restrict mobility in certain conditions
    • Increased fuel tank capacity (500 L) results in higher operation costs
    • Also lacks an AC cabin and GPS which might be expected in this class of machinery

    Pros:

    Cons:

    Closing Recommendation

    Both graders come from BEML, so the right pick depends on the size of the job in front of you. Pick the BEML BG605A if you work on standard roads and want easier handling with a tighter turning radius. Pick the BEML BG825 if you work on large-scale grading jobs and need higher power with a longer blade. So match the machine to your work: BG605A for standard road jobs, BG825 for large-scale grading.

    BEML BG605A Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    Brand BEML Motor grader BEML Motor grader
    Type Medium (12-20 Ton) Large (>50 Ton)
    Price ₹ 85-95 Lakhs ₹ 1.5-1.8 Crores
    Engine BEML 170.3 HP BEML 280 HP
    Weight 15800 kg 25750 kg
    Min. Turning Radius 7400 mm 7900 mm
    Max. Forward Speed 44.2 km/hr 44.9 km/hr
    Max. Reverse Speed 31.3 km/hr 47.9 km/hr
    Quick Overview:

    The BEML BG605A Motor Grader is a powerful grader machine built for road construction, land leveling, mining, and maintenance projects in India. It is powered by a BEML 170 Hp diesel engine that delivers up to 785 Nm of torque, ensuring reliable performance and fuel efficiency in challenging conditions. With a moldboard size of 3.66 m and an operating weight of 15.8 tons, it offers greater coverage, strong cutting force, and precise surface finishing in fewer passes. The hydroshift transmission and full hydraulic steering provide smooth operation and better maneuverability over uneven terrains. Its advanced hydraulic system allows accurate blade control while the durable axle setup enhances stability. Manufactured by BEML Limited, it guarantees long-term reliability and service support. The price of the BEML BG605A motor grader in India is around ₹85 to ₹95 lakhs. It is suitable for contractors looking for mid-size motor grader performance, durability, and high productivity for infrastructure projects.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    BEML BG605A vs BG825: Which Motor Grader Fits Your Road Job?

    The BEML BG605A and the BEML BG825 both grade roads, but they are built for different job sizes. The BG605A runs a 170.3 HP engine and has a tighter turning radius of 7400 mm, which makes it easy to handle on standard road work. The BG825 runs a much bigger 280 HP engine and carries a longer 4928 mm blade, built for large-scale grading jobs.

    A contractor working on smaller roads or routine maintenance may prefer the BG605A for its easier handling and lower fuel use. A company working on large highway or large-scale earthwork projects may need the BG825 for its higher power and longer blade. Both machines come from the same BEML dealer network in India. Browse the wider motor grader range or read the motor grader guide to match a machine to your project.

    BEML BG605A Motor Grader

    Pros:

    • Reliable for long-term road development tasks
    • Engine provides 170.3 HP which is adequate for standard grading tasks
    • Good turning radius of 7400 mm for maneuverability
    • Maximum forward speed of 44.2 km/hr aids in efficient operation

    Cons:

    • Blade length of 3665 mm may be insufficient for larger scale operations
    • Lacks advanced features such as an AC cabin and GPS
    • Maximum lifting height and cutting depth are less compared to the BG825 model

    BEML BG825 Motor Grader

    Pros:

    • High gross power of 280 HP for heavy and large-scale grading tasks
    • Longer blade length of 4928 mm for increased productivity
    • Advanced steering angle of 50° for superior maneuverability
    • Greater maximum reverse speed at 47.9 km/hr
    • Higher system pressure capability at 20.6 MPa for hydraulic operations

    Cons:

    • Significantly higher gross vehicle weight may restrict mobility in certain conditions
    • Increased fuel tank capacity (500 L) results in higher operation costs
    • Also lacks an AC cabin and GPS which might be expected in this class of machinery

    Pros:

    Cons:

    Closing Recommendation

    Both graders come from BEML, so the right pick depends on the size of the job in front of you. Pick the BEML BG605A if you work on standard roads and want easier handling with a tighter turning radius. Pick the BEML BG825 if you work on large-scale grading jobs and need higher power with a longer blade. So match the machine to your work: BG605A for standard road jobs, BG825 for large-scale grading.

    BEML BG605A Vs BEML BG825 Motor Grader Price, Technical Specifications & Features

    BEML BG605A BEML BG825
    Brand
    BEML Motor grader BEML Motor grader
    Type
    Medium (12-20 Ton) Large (>50 Ton)
    Price
    ₹ 85-95 Lakhs ₹ 1.5-1.8 Crores
    Engine
    BEML 170.3 HP BEML 280 HP
    Weight
    15800 kg 25750 kg
    Min. Turning Radius
    7400 mm 7900 mm
    Max. Forward Speed
    44.2 km/hr 44.9 km/hr
    Max. Reverse Speed
    31.3 km/hr 47.9 km/hr
    Quick Overview:

    The BEML BG605A Motor Grader is a powerful grader machine built for road construction, land leveling, mining, and maintenance projects in India. It is powered by a BEML 170 Hp diesel engine that delivers up to 785 Nm of torque, ensuring reliable performance and fuel efficiency in challenging conditions. With a moldboard size of 3.66 m and an operating weight of 15.8 tons, it offers greater coverage, strong cutting force, and precise surface finishing in fewer passes. The hydroshift transmission and full hydraulic steering provide smooth operation and better maneuverability over uneven terrains. Its advanced hydraulic system allows accurate blade control while the durable axle setup enhances stability. Manufactured by BEML Limited, it guarantees long-term reliability and service support. The price of the BEML BG605A motor grader in India is around ₹85 to ₹95 lakhs. It is suitable for contractors looking for mid-size motor grader performance, durability, and high productivity for infrastructure projects.

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.
    65 differ · 14 identical

    Key highlights: BEML BG605A vs BEML BG825 Motor Grader

    BEML BG605A BEML BG825
    Engine Make BEML BSAA6D125 BSIII CEV BEML BS6140
    Max Torque 785 Nm @ 1200 rpm NA
    Fuel Tank 250 L 500 L
    Hydraulic System 58 L 105 L
    Tires 14.00 x 24 - 16 PR (Tube type) G-2 type tyre 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height NA 400 mm
    Max Lift Above Ground 400 mm 490 mm
    Max Cutting Depth 500 mm 680 mm
    Blade Pitch Angle NA 49° forward; 5° backward
    Wheel Base 6570 mm 7100 mm
    Overall Length 10490 mm 11470 mm
    Overall Height 3679 mm 3750 mm
    Warranty 1 Yr. / 2500 hr. 1 Yr. / 2500 hr.
    AC Cabin Not Available Not Available
    GPS Not Available Not Available

    Key highlights: BEML BG605A vs BEML BG825 Motor Grader

    BEML BG605A BEML BG825
    Engine Make
    BEML BSAA6D125 BSIII CEV BEML BS6140
    Max Torque
    785 Nm @ 1200 rpm NA
    Fuel Tank
    250 L 500 L
    Hydraulic System
    58 L 105 L
    Tires
    14.00 x 24 - 16 PR (Tube type) G-2 type tyre 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres
    Frame Height
    NA 400 mm
    Max Lift Above Ground
    400 mm 490 mm
    Max Cutting Depth
    500 mm 680 mm
    Blade Pitch Angle
    NA 49° forward; 5° backward
    Wheel Base
    6570 mm 7100 mm
    Overall Length
    10490 mm 11470 mm
    Overall Height
    3679 mm 3750 mm
    Warranty
    1 Yr. / 2500 hr. 1 Yr. / 2500 hr.
    AC Cabin
    Not Available Not Available
    GPS
    Not Available Not Available

    Full specifications: BEML BG605A vs BEML BG825 Motor Grader

    Engine

    BEML BG605A BEML BG825
    Model BEML 170.3 HP BEML 280 HP
    Fuel Diesel Diesel
    Type 4 stroke; water-cooled; Turbocharged overhead valve; direct injection; mechanical variable speed governor. 4 stroke; water-cooled
    Gross Power 170.3 HP (127 kW) @ 1800 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders 6 inline 6 inline
    Max Torque 785 Nm @ 1200 rpm NA
    Displacement 11.04 L 15.24 L
    Battery 2 x 12 / 200 Ah 2 x 12 V / 200 Ah maintenance free batteries
    Alternator 24V / 45A 24V / 45A

    Transmission

    BEML BG605A BEML BG825
    Type BEML - Hydroshift Transmission BEML - Hydro Shift Transmission

    Speed

    BEML BG605A BEML BG825
    Max. Forward Speed 44.2 km/hr 44.9 km/hr
    Max. Reverse Speed 31.3 km/hr 47.9 km/hr

    Axles

    BEML BG605A BEML BG825
    Rear Axle Full floating rear axle is made of forged heat treated steel. Full-flotaing rear is made of forged heat treated steel
    Front Axle Elliot - type Reverse Elliot-type

    Tyres

    BEML BG605A BEML BG825
    Size 14.00 x 24 - 16 PR (Tube type) G-2 type tyre 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    BEML BG605A BEML BG825
    Type Orbitrol; full hydraulic steering system Orbitrol; full hydraulic steering system
    Minimum Turning Radius 7400 mm 7900 mm
    Steering-Angle 40° 50°

    Brakes

    BEML BG605A BEML BG825
    Service Foot operated; oil disk brakes; Air actuated on four wheels and sealed for adjustment-free operation. Two cross brake lines for sure braking. Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking Hand operated internal expanding; shoe type; duo-servo type actuated on transmission output shaft. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    BEML BG605A BEML BG825
    Front Frame Height NA 400 mm
    Front Frame Width NA 350 mm
    Front Frame Thickness NA NA

    MoldBoard

    BEML BG605A BEML BG825
    Type Box-section construction with wear resistant steel; hydraulic blade side shift and tip control; cutting edges and side edges are attached. Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length 3665 mm 4928 mm
    Blade Height 540 mm 800 mm
    Blade Thickness 20 mm 25 mm
    Cutting Edge 152 mm x 27 mm 203 x 19 mm
    Blade Pull NA NA
    Blade Down Pressure NA NA
    Moldboard Side Shift (Right/Left) NA NA
    Maximum Shoulder Reach (Right/Left) 1955 mm / 1670 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground 400 mm 490 mm
    Maximum Cutting Depth 500 mm 680 mm
    Blade Pitch Angle NA 49° forward; 5° backward

    Hydraulics

    BEML BG605A BEML BG825
    Type Four gear pumps powering the work equipment; steering and transmission; differential lock - unlock and hydraulic circuits Three gear pump (tandem) type
    Maximum Pump Flow 2 x 39 L/min 268 L/min
    Maximum System Pressure 17.2 MPa 20.6 MPa

    Service Capacities

    BEML BG605A BEML BG825
    Fuel Tank 250 L 500 L
    Cooling System 55 L 58 L
    Engine Oil 26 L 38 L
    DEF Tank NA NA
    Trasnsmission Oil 36 L 25 L
    Final Drive 30 L 34 L
    Hydraulic System 58 L 105 L
    Circle Reverse Housing NA NA

    Weight

    BEML BG605A BEML BG825
    Gross Vehicle Weight 15800 kg 25750 kg
    Moldboard Base 2640 mm 3100 mm
    Wheelbase 6570 mm 7100 mm
    Tandem Wheelbase 1515 mm 1840 mm
    Width of Standard Moldboard 3665 mm 4928 mm
    Overall Length 10490 mm 11470 mm
    Tread Gauge 2209 mm 2460 mm
    Width of Tires 2524 mm 3050 mm
    Articulation, left or right NA 25°
    Minimum Ground Clearence 325 mm 680 mm

    Full specifications: BEML BG605A vs BEML BG825 Motor Grader

    Engine

    BEML BG605A BEML BG825
    Model
    BEML 170.3 HP BEML 280 HP
    Fuel
    Diesel Diesel
    Type
    4 stroke; water-cooled; Turbocharged overhead valve; direct injection; mechanical variable speed governor. 4 stroke; water-cooled
    Gross Power
    170.3 HP (127 kW) @ 1800 rpm 280 HP (209 kW) @ 2100 rpm
    Number Of Cylinders
    6 inline 6 inline
    Max Torque
    785 Nm @ 1200 rpm NA
    Displacement
    11.04 L 15.24 L
    Battery
    2 x 12 / 200 Ah 2 x 12 V / 200 Ah maintenance free batteries
    Alternator
    24V / 45A 24V / 45A

    Speed

    BEML BG605A BEML BG825
    Max. Forward Speed
    44.2 km/hr 44.9 km/hr
    Max. Reverse Speed
    31.3 km/hr 47.9 km/hr

    Axles

    BEML BG605A BEML BG825
    Rear Axle
    Full floating rear axle is made of forged heat treated steel. Full-flotaing rear is made of forged heat treated steel
    Front Axle
    Elliot - type Reverse Elliot-type

    Tyres

    BEML BG605A BEML BG825
    Size
    14.00 x 24 - 16 PR (Tube type) G-2 type tyre 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres

    Steering

    BEML BG605A BEML BG825
    Type
    Orbitrol; full hydraulic steering system Orbitrol; full hydraulic steering system
    Minimum Turning Radius
    7400 mm 7900 mm
    Steering-Angle
    40° 50°

    Brakes

    BEML BG605A BEML BG825
    Service
    Foot operated; oil disk brakes; Air actuated on four wheels and sealed for adjustment-free operation. Two cross brake lines for sure braking. Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking.
    Parking
    Hand operated internal expanding; shoe type; duo-servo type actuated on transmission output shaft. Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested.

    Frame

    BEML BG605A BEML BG825
    Front Frame Height
    NA 400 mm
    Front Frame Width
    NA 350 mm
    Front Frame Thickness
    NA NA

    Moldboard

    BEML BG605A BEML BG825
    Type
    Box-section construction with wear resistant steel; hydraulic blade side shift and tip control; cutting edges and side edges are attached. Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached.
    Blade Length
    3665 mm 4928 mm
    Blade Height
    540 mm 800 mm
    Blade Thickness
    20 mm 25 mm
    Cutting Edge
    152 mm x 27 mm 203 x 19 mm
    Blade Pull
    NA NA
    Blade Down Pressure
    NA NA
    Moldboard Side Shift (Right/Left)
    NA NA
    Maximum Shoulder Reach (Right/Left)
    1955 mm / 1670 mm 2400 mm / 2400 mm
    Maximum Lift Above Ground
    400 mm 490 mm
    Maximum Cutting Depth
    500 mm 680 mm
    Blade Pitch Angle
    NA 49° forward; 5° backward

    Hydraulics

    BEML BG605A BEML BG825
    Type
    Four gear pumps powering the work equipment; steering and transmission; differential lock - unlock and hydraulic circuits Three gear pump (tandem) type
    Maximum Pump Flow
    2 x 39 L/min 268 L/min
    Maximum System Pressure
    17.2 MPa 20.6 MPa

    Service Capacities

    BEML BG605A BEML BG825
    Fuel Tank
    250 L 500 L
    Cooling System
    55 L 58 L
    Engine Oil
    26 L 38 L
    DEF Tank
    NA NA
    Trasnsmission Oil
    36 L 25 L
    Final Drive
    30 L 34 L
    Hydraulic System
    58 L 105 L
    Circle Reverse Housing
    NA NA

    Weight

    BEML BG605A BEML BG825
    Gross Vehicle Weight
    15800 kg 25750 kg
    Moldboard Base
    2640 mm 3100 mm
    Wheelbase
    6570 mm 7100 mm
    Tandem Wheelbase
    1515 mm 1840 mm
    Width of Standard Moldboard
    3665 mm 4928 mm
    Overall Length
    10490 mm 11470 mm
    Tread Gauge
    2209 mm 2460 mm
    Width of Tires
    2524 mm 3050 mm
    Articulation, left or right
    NA 25°
    Minimum Ground Clearence
    325 mm 680 mm

    Popular Comparisons with BEML BG605A

    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    SEM 917F Motor Grader
    SEM SEM 917F
    4.5 rating
    ₹ 55-70 Lakhs
    13160 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    SDLG 924 Motor Grader in India
    SDLG SDLG G9240F
    4.5 rating
    Price Available Soon
    18000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    SDLG 919 Motor Grader
    SDLG SDLG G9190Hi
    4.5 rating
    Price Available Soon
    16200 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    SDLG 915 Motor Grader
    SDLG SDLG G9150Hi
    4.5 rating
    ₹ 80-95 Lakhs
    14000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Shantui 15-G Motor Grader
    Shantui Shantui SG15-G
    4.5 rating
    Price Available Soon
    13000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Fine 985 Motor Grader
    Fine Equipments Fine FMG 985 HD
    4.5 rating
    ₹ 55-75 Lakhs
    15800 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CAT 140 Grader
    Caterpillar Cat 140 GC
    4.5 rating
    ₹ 1.4 -1.7 Crore
    17650 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CAT 120 Grader
    Caterpillar Cat 120 GC
    4.5 rating
    ₹ 1.1-1.4 Crore
    14496 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CAT Grader 120
    Caterpillar Cat 120
    4.5 rating
    ₹ 1.2 -1.5 Crore
    15699 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Fine 180 Motor Grader
    Fine Equipments Fine FMG 180
    4.5 rating
    ₹ 45-60 Lakhs
    14500 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Sany 210 Motor Grader
    SANY Sany STG210C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17900 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Sany 140 Motor Grader
    SANY Sany STG140C-10
    4.5 rating
    ₹ 55-60 Lakhs
    12650 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Liugong Grader 4180D
    LiuGong LiuGong 4180D
    4.5 rating
    ₹ 70-95 Lakhs
    15000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    XCMG 1705 Motor Grader
    XCMG XCMG GR1705
    4.5 rating
    ₹ 65-85 Lakhs
    15000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    ACE 176 Grader
    ACE ACE AG 176
    4.5 rating
    ₹ 74-76 Lakhs
    15000 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CASE 865C Grader
    CASE CASE 865C
    4.5 rating
    ₹ 1.1-1.3 Crore
    15481 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CASE 845 Grader
    CASE CASE 845C
    4.5 rating
    ₹ 0.90-1.05 Crore
    14373 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CASE 865 Motor Grader
    CASE CASE 865B
    4.5 rating
    ₹ 0.90-1.1 Crore
    15587 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    CASE Grader 845B
    CASE CASE 845B
    4.5 rating
    ₹ 80-95 Lakhs
    14605 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Komatsu GD 705 Motor Grader
    L&T Komatsu Komatsu GD705-5
    4.5 rating
    ₹ 1.5-1.9 Crore
    19300 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Komatsu GD535
    L&T Komatsu Komatsu GD535-6
    4.5 rating
    ₹ 80-84 lakhs
    15040 kg
    Compare
    VS
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Komatsu 555 Motor Grader
    L&T Komatsu Komatsu GD555
    4.5 rating
    ₹ 1.1-1.40 Crore
    15135 kg
    Compare

    Popular Comparisons with BEML BG825

    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 24 Grader
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 955 Motor Grader
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 755 Motor Grader
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 825 Motor Grader
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Questions buyers ask about the BEML BG605A vs BEML BG825

    Ans.

    The BEML BG605A runs a 170.3 HP engine and suits standard road development work. The BEML BG825 runs a much bigger 280 HP engine with a longer blade, built for large-scale grading jobs. Both are BEML motor graders, but the BG825 is the larger, more powerful machine.

    Ans.

    The BG825 motor grader is used for large-scale road and earthwork grading jobs. Its 280 HP engine and 4928 mm blade let it move more material per pass than a smaller grader. It suits highway projects and big sites where output matters more than tight handling.

    Ans.

    The BEML BG825 has the longer blade, at 4928 mm. The BG605A has a shorter blade, at 3665 mm. A longer blade covers more ground in one pass, which helps a crew finish a large grading job in fewer passes and less time.

    Ans.

    No, neither the BEML BG605A nor the BG825 comes with an AC cabin or GPS as standard. Both graders keep to core grading features without these comfort or tracking extras. A buyer who wants these features would need to check aftermarket options with a dealer before placing an order.

    Ans.

    The BEML BG605A is easier to turn on a standard job. It has a tighter turning radius of 7400 mm, which helps on smaller roads and sites with less space. The BG825 is bigger and built more for open, large-scale grading work.

    BEML BG605A Vs BEML BG825 - Compare Price & Availability Across 600+ Locations in India

    Compare BEML BG605A Vs BEML BG825 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Read the full disclaimer

    Compare