Suno Sabki, Chuno Apni.
Contact Us



    Contact Info
    Chat with us

    BEML BG825 VS Sany STG170C-10 Motor Grader

    BEML BG825 vs Sany STG170C-10: the two differ on 74 of 79 listed specs. The main differences are Engine (BEML 280 HP vs Cummins 173 HP), Price (₹ 1.5-1.8 Crores vs ₹ 75-90 Lakhs), Max Torque (NA vs 880 Nm @ 1300 rpm), Weight (25750 kg vs 17250 kg). The other 5 specs are the same.

    Specs from OEM brochures · comparison updated Aug 2026

    BEML BG825
    ₹ 1.5-1.8 Crores*

    BEML BG825

    • Engine

      BEML 280 HP

    • Blade

      4928 mm

    • Weight

      25750 kg

    • Turning Radius

      7900 mm

    • Max Forward Speed

      44.9 km/hr

    • Max Reverse Speed

      47.9 km/hr
    Large (>50 Ton)
    Sany STG170C-10
    ₹ 75-90 Lakhs*

    Sany STG170C-10

    • Engine

      Cummins 173 HP

    • Blade

      3660 mm

    • Weight

      17250 kg

    • Turning Radius

      7300 mm

    • Max Forward Speed

      36.0 km/hr

    • Max Reverse Speed

      26.0 km/hr
    Medium (12-20 Ton)

    Add a third machine

    What's different: BEML BG825 vs Sany STG170C-10

    74 specs differ, 5 are identical. The full tables are below.

    Spec BEML BG825 Sany STG170C-10
    EngineBEML 280 HPCummins 173 HP
    Price₹ 1.5-1.8 Crores₹ 75-90 Lakhs
    Max TorqueNA880 Nm @ 1300 rpm
    Weight25750 kg17250 kg
    Fuel Tank500 L350 L
    BrandBEML Motor graderSANY Motor grader
    TypeLarge (>50 Ton)Medium (12-20 Ton)
    Min. Turning Radius7900 mm7300 mm

    See all 74 differences ↓

    BEML BG825 price & full specs →Sany STG170C-10 price & full specs →

    * Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights BEML BG825Sany STG170C-10
    BEML BG825 VS Sany STG170C-10 Motor Grader

    BEML BG825 vs Sany STG170C-10: the two differ on 74 of 79 listed specs. The main differences are Engine (BEML 280 HP vs Cummins 173 HP), Price (₹ 1.5-1.8 Crores vs ₹ 75-90 Lakhs), Max Torque (NA vs 880 Nm @ 1300 rpm), Weight (25750 kg vs 17250 kg). The other 5 specs are the same.

    Specs from OEM brochures · comparison updated Aug 2026

    BG825 Motor Grader
    BEML BG825

    ₹ 1.5-1.8 Crores

    Sany STG170C-10 Motor Grader
    Sany STG170C-10

    ₹ 75-90 Lakhs

    Particulars BEML BG825 Sany STG170C-10

    BEML BG825 vs Sany STG170C-10: Motor Grader Comparison

    The BEML BG825 and the Sany STG170C-10 are both motor graders for road and site leveling work, but they suit different scales of work. The BEML BG825 runs a strong 280 HP engine with a wide 4928 mm blade, which covers more ground per pass on large road and highway projects. The Sany STG170C-10 is easier to turn, comes with a standard AC cabin and GPS, and suits smaller sites where driver comfort and precision matter more than raw size.

    Fleet owners already running BEML equipment will find the BG825 fits large-scale grading work. Those looking at Sany machines will like the STG170C-10's comfort features. See the full motor grader range or read our motor grader buying guide to compare more options.

    BEML BG825 Motor Grader

    Pros:

    • Engine offers high gross power of 280 HP for demanding tasks
    • Maximum forward and reverse speeds of 44.9 km/hr and 47.9 km/hr respectively
    • Large fuel tank capacity of 500 L for longer operational periods
    • Blade length of 4928 mm for wide coverage in a single pass
    • Full-floating rear axle and robust tires suited for rock-type terrain

    Cons:

    • Larger turning radius of 7900 mm may affect maneuverability in tight spaces
    • Lack of AC cabin may reduce operator comfort in harsh conditions
    • GPS not available, which could benefit navigation and precision in grading tasks

    Sany STG170C-10 Motor Grader

    Pros:

    • Equipped with Cummins engine with a gross power of 173 HP
    • Features a smaller turning radius of 7300 mm for better maneuverability
    • Standard AC cabin and GPS for improved operator comfort and navigation
    • Efficient no spin differential system with reliable rear axle
    • Blade down pressure of 8769 kgf for strong, precise cutting capability

    Cons:

    • Less powerful than BEML BG825 with lower engine power
    • Shorter blade length of 3660 mm, which may reduce productivity per pass
    • Lower maximum forward and reverse speeds of 36.0 km/hr and 26.0 km/hr

    Pros:

    Cons:

    Closing Recommendation

    Both motor graders do good work, but they fit different site sizes. The BEML BG825 suits large-scale projects that need strong power and wide blade coverage. The Sany STG170C-10 suits smaller sites where easy turning, driver comfort, and precise grading matter more. So match the machine to your work: BEML BG825 for large highway and earthmoving projects, Sany STG170C-10 for smaller sites needing precision and comfort.

    BEML BG825 Vs Sany STG170C-10 Motor Grader Price, Technical Specifications & Features

    Brand BEML Motor grader SANY Motor grader
    Type Large (>50 Ton) Medium (12-20 Ton)
    Price ₹ 1.5-1.8 Crores ₹ 75-90 Lakhs
    Engine BEML 280 HP Cummins 173 HP
    Weight 25750 kg 17250 kg
    Min. Turning Radius 7900 mm 7300 mm
    Max. Forward Speed 44.9 km/hr 36.0 km/hr
    Max. Reverse Speed 47.9 km/hr 26.0 km/hr
    Quick Overview:

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    The Sany STG170C-10 Motor Grader is a high-performance grader machine built for highways, mining, and large infrastructure projects in India. It features a 173 HP Cummins QSB6.7 engine, providing strong power and fuel efficiency for heavy-duty grading tasks. With a 3.66 m moldboard and 95 kN drawbar pull, it ensures effective cutting, smooth leveling, and quicker work cycles. Its advanced hydraulic system enables precise blade control, while the ZF Tiptronic transmission ensures smooth gear shifting and better control during long operations. The balanced design enhances stability and finishing quality, while the ergonomic cabin improves visibility and operator comfort. The Sany STG170C-10 motor grader price in India ranges from ₹75 to ₹90 lakh. This grader machine from SANY Construction Equipment is ideal for contractors seeking high productivity and durability for large-scale grading performance.

    BEML BG825 vs Sany STG170C-10: Motor Grader Comparison

    The BEML BG825 and the Sany STG170C-10 are both motor graders for road and site leveling work, but they suit different scales of work. The BEML BG825 runs a strong 280 HP engine with a wide 4928 mm blade, which covers more ground per pass on large road and highway projects. The Sany STG170C-10 is easier to turn, comes with a standard AC cabin and GPS, and suits smaller sites where driver comfort and precision matter more than raw size.

    Fleet owners already running BEML equipment will find the BG825 fits large-scale grading work. Those looking at Sany machines will like the STG170C-10's comfort features. See the full motor grader range or read our motor grader buying guide to compare more options.

    BEML BG825 Motor Grader

    Pros:

    • Engine offers high gross power of 280 HP for demanding tasks
    • Maximum forward and reverse speeds of 44.9 km/hr and 47.9 km/hr respectively
    • Large fuel tank capacity of 500 L for longer operational periods
    • Blade length of 4928 mm for wide coverage in a single pass
    • Full-floating rear axle and robust tires suited for rock-type terrain

    Cons:

    • Larger turning radius of 7900 mm may affect maneuverability in tight spaces
    • Lack of AC cabin may reduce operator comfort in harsh conditions
    • GPS not available, which could benefit navigation and precision in grading tasks

    Sany STG170C-10 Motor Grader

    Pros:

    • Equipped with Cummins engine with a gross power of 173 HP
    • Features a smaller turning radius of 7300 mm for better maneuverability
    • Standard AC cabin and GPS for improved operator comfort and navigation
    • Efficient no spin differential system with reliable rear axle
    • Blade down pressure of 8769 kgf for strong, precise cutting capability

    Cons:

    • Less powerful than BEML BG825 with lower engine power
    • Shorter blade length of 3660 mm, which may reduce productivity per pass
    • Lower maximum forward and reverse speeds of 36.0 km/hr and 26.0 km/hr

    Pros:

    Cons:

    Closing Recommendation

    Both motor graders do good work, but they fit different site sizes. The BEML BG825 suits large-scale projects that need strong power and wide blade coverage. The Sany STG170C-10 suits smaller sites where easy turning, driver comfort, and precise grading matter more. So match the machine to your work: BEML BG825 for large highway and earthmoving projects, Sany STG170C-10 for smaller sites needing precision and comfort.

    BEML BG825 Vs Sany STG170C-10 Motor Grader Price, Technical Specifications & Features

    BEML BG825 Sany STG170C-10
    Brand
    BEML Motor grader SANY Motor grader
    Type
    Large (>50 Ton) Medium (12-20 Ton)
    Price
    ₹ 1.5-1.8 Crores ₹ 75-90 Lakhs
    Engine
    BEML 280 HP Cummins 173 HP
    Weight
    25750 kg 17250 kg
    Min. Turning Radius
    7900 mm 7300 mm
    Max. Forward Speed
    44.9 km/hr 36.0 km/hr
    Max. Reverse Speed
    47.9 km/hr 26.0 km/hr
    Quick Overview:

    The BEML BG825 Motor Grader is a high-performance grader machine designed for road construction, mining, and large infrastructure projects in India. It operates with a 280 HP diesel engine, delivering strong torque and fuel efficiency for continuous heavy-duty operations. With an operating weight of 25 to 28 tons and a 4.9 m moldboard, it ensures wider coverage, fewer passes, and precise surface levelling. Its advanced hydraulic system and electronically controlled transmission offer smooth blade control, improved grading accuracy, and higher productivity. The articulated frame design enhances maneuverability on highways, mining roads, and complex job sites. Manufactured by BEML Limited, it ensures durability and strong after-sales support. The BEML BG825 motor grader price in India is in the premium range of about ₹1.5 to ₹1.8 Crores. This machine from BEML Construction Equipment is suitable for contractors looking for heavy motor grader performance, low downtime, and maximum return on investment in large-scale projects.

    The Sany STG170C-10 Motor Grader is a high-performance grader machine built for highways, mining, and large infrastructure projects in India. It features a 173 HP Cummins QSB6.7 engine, providing strong power and fuel efficiency for heavy-duty grading tasks. With a 3.66 m moldboard and 95 kN drawbar pull, it ensures effective cutting, smooth leveling, and quicker work cycles. Its advanced hydraulic system enables precise blade control, while the ZF Tiptronic transmission ensures smooth gear shifting and better control during long operations. The balanced design enhances stability and finishing quality, while the ergonomic cabin improves visibility and operator comfort. The Sany STG170C-10 motor grader price in India ranges from ₹75 to ₹90 lakh. This grader machine from SANY Construction Equipment is ideal for contractors seeking high productivity and durability for large-scale grading performance.
    74 differ · 5 identical

    Key highlights: BEML BG825 vs Sany STG170C-10 Motor Grader

    BEML BG825 Sany STG170C-10
    Engine Make BEML BS6140 Cummins QSB6.7
    Max Torque NA 880 Nm @ 1300 rpm
    Fuel Tank 500 L 350 L
    Hydraulic System 105 L 110 L
    Tires 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 14 x 24" 16-PR (G3)
    Frame Height 400 mm NA
    Max Lift Above Ground 490 mm 480 mm
    Max Cutting Depth 680 mm 630 mm
    Blade Pitch Angle 49° forward; 5° backward NA
    Wheel Base 7100 mm 6127 mm
    Overall Length 11470 mm 11100 mm
    Overall Height 3750 mm 3310 mm
    Warranty 1 Yr. / 2500 hr. 1 Yr. / 2500 hr.
    AC Cabin Not Available Standard
    GPS Not Available Standard

    Key highlights: BEML BG825 vs Sany STG170C-10 Motor Grader

    BEML BG825 Sany STG170C-10
    Engine Make
    BEML BS6140 Cummins QSB6.7
    Max Torque
    NA 880 Nm @ 1300 rpm
    Fuel Tank
    500 L 350 L
    Hydraulic System
    105 L 110 L
    Tires
    18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 14 x 24" 16-PR (G3)
    Frame Height
    400 mm NA
    Max Lift Above Ground
    490 mm 480 mm
    Max Cutting Depth
    680 mm 630 mm
    Blade Pitch Angle
    49° forward; 5° backward NA
    Wheel Base
    7100 mm 6127 mm
    Overall Length
    11470 mm 11100 mm
    Overall Height
    3750 mm 3310 mm
    Warranty
    1 Yr. / 2500 hr. 1 Yr. / 2500 hr.
    AC Cabin
    Not Available Standard
    GPS
    Not Available Standard

    Full specifications: BEML BG825 vs Sany STG170C-10 Motor Grader

    Engine

    BEML BG825 Sany STG170C-10
    Model BEML 280 HP Cummins 173 HP
    Fuel Diesel Diesel
    Type 4 stroke; water-cooled CEV IV
    Gross Power 280 HP (209 kW) @ 2100 rpm 173 HP 129 kW @ 2200 rpm
    Number Of Cylinders 6 inline NA
    Max Torque NA 880 Nm @ 1300 rpm
    Displacement 15.24 L 6.7 L
    Battery 2 x 12 V / 200 Ah maintenance free batteries NA
    Alternator 24V / 45A NA

    Transmission

    BEML BG825 Sany STG170C-10
    Type BEML - Hydro Shift Transmission ZF Tiptronic Transmission

    Speed

    BEML BG825 Sany STG170C-10
    Max. Forward Speed 44.9 km/hr 36.0 km/hr
    Max. Reverse Speed 47.9 km/hr 26.0 km/hr

    Axles

    BEML BG825 Sany STG170C-10
    Rear Axle Full-flotaing rear is made of forged heat treated steel No spin differential system with reliable & efficient jingda rear axle.
    Front Axle Reverse Elliot-type NA

    Tyres

    BEML BG825 Sany STG170C-10
    Size 18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 14 x 24" 16-PR (G3)

    Steering

    BEML BG825 Sany STG170C-10
    Type Orbitrol; full hydraulic steering system Hydraulic power; articulated frame steering
    Minimum Turning Radius 7900 mm 7300 mm
    Steering-Angle 50° 45°

    Brakes

    BEML BG825 Sany STG170C-10
    Service Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking. Hydraulic wet multi-disc brake
    Parking Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested. Spring-applied; hydraulically released

    Frame

    BEML BG825 Sany STG170C-10
    Front Frame Height 400 mm NA
    Front Frame Width 350 mm NA
    Front Frame Thickness NA NA

    MoldBoard

    BEML BG825 Sany STG170C-10
    Type Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached. NA
    Blade Length 4928 mm 3660 mm
    Blade Height 800 mm 620 mm
    Blade Thickness 25 mm NA
    Cutting Edge 203 x 19 mm NA
    Blade Pull NA NA
    Blade Down Pressure NA 8769 kgf
    Moldboard Side Shift (Right/Left) NA 1760 mm / 1760 mm
    Maximum Shoulder Reach (Right/Left) 2400 mm / 2400 mm NA
    Maximum Lift Above Ground 490 mm 480 mm
    Maximum Cutting Depth 680 mm 630 mm
    Blade Pitch Angle 49° forward; 5° backward NA

    Hydraulics

    BEML BG825 Sany STG170C-10
    Type Three gear pump (tandem) type NA
    Maximum Pump Flow 268 L/min NA
    Maximum System Pressure 20.6 MPa NA

    Service Capacities

    BEML BG825 Sany STG170C-10
    Fuel Tank 500 L 350 L
    Cooling System 58 L NA
    Engine Oil 38 L NA
    DEF Tank NA 30 L
    Trasnsmission Oil 25 L NA
    Final Drive 34 L NA
    Hydraulic System 105 L 110 L
    Circle Reverse Housing NA NA

    Weight

    BEML BG825 Sany STG170C-10
    Gross Vehicle Weight 25750 kg 17250 kg
    Moldboard Base 3100 mm 2500 mm
    Wheelbase 7100 mm 6127 mm
    Tandem Wheelbase 1840 mm 1538 mm
    Width of Standard Moldboard 4928 mm 3660 mm
    Overall Length 11470 mm 11100 mm
    Tread Gauge 2460 mm 2280 mm
    Width of Tires 3050 mm 2740 mm
    Articulation, left or right 25° NA
    Minimum Ground Clearence 680 mm 410 mm

    Full specifications: BEML BG825 vs Sany STG170C-10 Motor Grader

    Engine

    BEML BG825 Sany STG170C-10
    Model
    BEML 280 HP Cummins 173 HP
    Fuel
    Diesel Diesel
    Type
    4 stroke; water-cooled CEV IV
    Gross Power
    280 HP (209 kW) @ 2100 rpm 173 HP 129 kW @ 2200 rpm
    Number Of Cylinders
    6 inline NA
    Max Torque
    NA 880 Nm @ 1300 rpm
    Displacement
    15.24 L 6.7 L
    Battery
    2 x 12 V / 200 Ah maintenance free batteries NA
    Alternator
    24V / 45A NA

    Speed

    BEML BG825 Sany STG170C-10
    Max. Forward Speed
    44.9 km/hr 36.0 km/hr
    Max. Reverse Speed
    47.9 km/hr 26.0 km/hr

    Axles

    BEML BG825 Sany STG170C-10
    Rear Axle
    Full-flotaing rear is made of forged heat treated steel No spin differential system with reliable & efficient jingda rear axle.
    Front Axle
    Reverse Elliot-type NA

    Tyres

    BEML BG825 Sany STG170C-10
    Size
    18.00 x 25 - 12PR(L-3) rock-type tubeless tyres 14 x 24" 16-PR (G3)

    Steering

    BEML BG825 Sany STG170C-10
    Type
    Orbitrol; full hydraulic steering system Hydraulic power; articulated frame steering
    Minimum Turning Radius
    7900 mm 7300 mm
    Steering-Angle
    50° 45°

    Brakes

    BEML BG825 Sany STG170C-10
    Service
    Foot-operated; oil disc brakes; air actuated on 4 rear wheels and sealed for adjustment-free operation. Two crossed brakes lines for sure braking. Hydraulic wet multi-disc brake
    Parking
    Mechanical; dry disc type actuated on transmission output shaft; spring applied and air tested. Spring-applied; hydraulically released

    Frame

    BEML BG825 Sany STG170C-10
    Front Frame Height
    400 mm NA
    Front Frame Width
    350 mm NA
    Front Frame Thickness
    NA NA

    Moldboard

    BEML BG825 Sany STG170C-10
    Type
    Box-section construction with wear-resistant steel; hydraulic blade side shift; and tip control. Reversible overlay end bits; side edgesare attached. NA
    Blade Length
    4928 mm 3660 mm
    Blade Height
    800 mm 620 mm
    Blade Thickness
    25 mm NA
    Cutting Edge
    203 x 19 mm NA
    Blade Pull
    NA NA
    Blade Down Pressure
    NA 8769 kgf
    Moldboard Side Shift (Right/Left)
    NA 1760 mm / 1760 mm
    Maximum Shoulder Reach (Right/Left)
    2400 mm / 2400 mm NA
    Maximum Lift Above Ground
    490 mm 480 mm
    Maximum Cutting Depth
    680 mm 630 mm
    Blade Pitch Angle
    49° forward; 5° backward NA

    Hydraulics

    BEML BG825 Sany STG170C-10
    Type
    Three gear pump (tandem) type NA
    Maximum Pump Flow
    268 L/min NA
    Maximum System Pressure
    20.6 MPa NA

    Service Capacities

    BEML BG825 Sany STG170C-10
    Fuel Tank
    500 L 350 L
    Cooling System
    58 L NA
    Engine Oil
    38 L NA
    DEF Tank
    NA 30 L
    Trasnsmission Oil
    25 L NA
    Final Drive
    34 L NA
    Hydraulic System
    105 L 110 L
    Circle Reverse Housing
    NA NA

    Weight

    BEML BG825 Sany STG170C-10
    Gross Vehicle Weight
    25750 kg 17250 kg
    Moldboard Base
    3100 mm 2500 mm
    Wheelbase
    7100 mm 6127 mm
    Tandem Wheelbase
    1840 mm 1538 mm
    Width of Standard Moldboard
    4928 mm 3660 mm
    Overall Length
    11470 mm 11100 mm
    Tread Gauge
    2460 mm 2280 mm
    Width of Tires
    3050 mm 2740 mm
    Articulation, left or right
    25° NA
    Minimum Ground Clearence
    680 mm 410 mm

    Popular Comparisons with BEML BG825

    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    16M3 Motor Grader
    Caterpillar Cat 16M3
    4.5 rating
    Price Available Soon
    32411 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 24 Grader
    Caterpillar Cat 24M
    4.5 rating
    Price Available Soon
    65840 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    CAT 14M3 Specs
    Caterpillar Cat 14M3
    4.5 rating
    Price Available Soon
    25968 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Sany SMG200C-8 Specs
    SANY Sany SMG200C-8
    4.5 rating
    ₹ 90-95 Lakhs
    20760 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 955 Motor Grader
    L&T Komatsu Komatsu GD955-7
    4.5 rating
    Price Available Soon
    47320 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 755 Motor Grader
    L&T Komatsu Komatsu GD755-5R
    4.5 rating
    Price Available Soon
    21650 kg
    Compare
    VS
    BG825 Motor Grader
    BEML BEML BG825
    4.5 rating
    ₹ 1.5-1.8 Crores
    25750 kg
    Komatsu 825 Motor Grader
    L&T Komatsu Komatsu GD825A-2
    4.5 rating
    Price Available Soon
    26350 kg
    Compare

    Popular Comparisons with Sany STG170C-10

    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    SEM 917F Motor Grader
    SEM SEM 917F
    4.5 rating
    ₹ 55-70 Lakhs
    13160 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    SDLG 924 Motor Grader in India
    SDLG SDLG G9240F
    4.5 rating
    Price Available Soon
    18000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    SDLG 919 Motor Grader
    SDLG SDLG G9190Hi
    4.5 rating
    Price Available Soon
    16200 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    SDLG 915 Motor Grader
    SDLG SDLG G9150Hi
    4.5 rating
    ₹ 80-95 Lakhs
    14000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Shantui 15-G Motor Grader
    Shantui Shantui SG15-G
    4.5 rating
    Price Available Soon
    13000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Fine 985 Motor Grader
    Fine Equipments Fine FMG 985 HD
    4.5 rating
    ₹ 55-75 Lakhs
    15800 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CAT 140 Grader
    Caterpillar Cat 140 GC
    4.5 rating
    ₹ 1.4 -1.7 Crore
    17650 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CAT 120 Grader
    Caterpillar Cat 120 GC
    4.5 rating
    ₹ 1.1-1.4 Crore
    14496 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CAT Grader 120
    Caterpillar Cat 120
    4.5 rating
    ₹ 1.2 -1.5 Crore
    15699 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Fine 180 Motor Grader
    Fine Equipments Fine FMG 180
    4.5 rating
    ₹ 45-60 Lakhs
    14500 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Sany 210 Motor Grader
    SANY Sany STG210C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17900 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Sany 140 Motor Grader
    SANY Sany STG140C-10
    4.5 rating
    ₹ 55-60 Lakhs
    12650 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    BEML 605 Motor Grader
    BEML BEML BG605A
    4.5 rating
    ₹ 85-95 Lakhs
    15800 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Liugong Grader 4180D
    LiuGong LiuGong 4180D
    4.5 rating
    ₹ 70-95 Lakhs
    15000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    XCMG 1705 Motor Grader
    XCMG XCMG GR1705
    4.5 rating
    ₹ 65-85 Lakhs
    15000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    ACE 176 Grader
    ACE ACE AG 176
    4.5 rating
    ₹ 74-76 Lakhs
    15000 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CASE 865C Grader
    CASE CASE 865C
    4.5 rating
    ₹ 1.1-1.3 Crore
    15481 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CASE 845 Grader
    CASE CASE 845C
    4.5 rating
    ₹ 0.90-1.05 Crore
    14373 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CASE 865 Motor Grader
    CASE CASE 865B
    4.5 rating
    ₹ 0.90-1.1 Crore
    15587 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    CASE Grader 845B
    CASE CASE 845B
    4.5 rating
    ₹ 80-95 Lakhs
    14605 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Komatsu GD 705 Motor Grader
    L&T Komatsu Komatsu GD705-5
    4.5 rating
    ₹ 1.5-1.9 Crore
    19300 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Komatsu GD535
    L&T Komatsu Komatsu GD535-6
    4.5 rating
    ₹ 80-84 lakhs
    15040 kg
    Compare
    VS
    Sany STG170C-10 Motor Grader
    SANY Sany STG170C-10
    4.5 rating
    ₹ 75-90 Lakhs
    17250 kg
    Komatsu 555 Motor Grader
    L&T Komatsu Komatsu GD555
    4.5 rating
    ₹ 1.1-1.40 Crore
    15135 kg
    Compare

    Questions buyers ask about the BEML BG825 vs Sany STG170C-10

    Ans.

    The BEML BG825 suits large highway projects better because of its stronger engine and wider blade, which cover more ground per pass. The Sany STG170C-10 is better suited to smaller roads and sites where tight turns matter more than sheer size.

    Ans.

    Yes, the Sany STG170C-10 comes with a standard AC cabin and GPS, which makes long shifts more comfortable for the driver. The BEML BG825 does not include these as standard, so comfort depends on any add-ons fitted later.

    Ans.

    The Sany STG170C-10 turns easier in tight spaces because it has a smaller turning radius than the BEML BG825. This makes it a better fit for sites with limited room to maneuver.

    Ans.

    The BEML BG825 has a bigger engine and larger fuel tank, so its servicing needs are on a bigger scale than the Sany STG170C-10. Both machines are well supported by dealer networks across India, so parts are not hard to find for either.

    Ans.

    The BEML BG825 is built with a full-floating rear axle and tires suited for rock-type terrain, so it holds up well on rough ground. The Sany STG170C-10 works fine on regular sites but is not specifically built for heavy rock work.

    Ans.

    Yes, the Sany STG170C-10 is easier for a new driver to handle because of its smaller turning radius and comfortable AC cabin. The BEML BG825 is a bigger machine and works best with a driver who already has grader experience.

    BEML BG825 Vs Sany STG170C-10 - Compare Price & Availability Across 600+ Locations in India

    Compare BEML BG825 Vs Sany STG170C-10 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Read the full disclaimer

    Compare