Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    Komatsu PC500LC-10R VS Komatsu PC600-8R1 Excavator

    Komatsu PC500LC-10R
    Price Available Soon*

    Komatsu PC500LC-10R

    • Weight

      51300Kg

    • Bucket

      3.5 - 3.7 m³

    • Dig. Depth

      6640 mm

    • Engine

      Komatsu 362 HP

    • Warranty

      1 Yr. / 3000 hr.

    • Boom

      6670 mm
    Extra-Large (>50 Ton)
    Komatsu PC600-8R1
    Price Available Soon*

    Komatsu PC600-8R1

    • Weight

      61900 Kg

    • Bucket

      2 - 3.5 m³

    • Dig. Depth

      8490 mm

    • Engine

      Komatsu 433 HP

    • Warranty

      1 Yr. / 3000 hr.

    • Boom

      7660 mm
    Extra-Large (>50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Komatsu PC500LC-10RKomatsu PC600-8R1
    Komatsu PC500LC-10R VS Komatsu PC600-8R1 Excavator
    Komatsu PC500LC-10R Excavator Price in India
    Komatsu PC500LC-10R

    Price Available Soon

    Komatsu PC600-8R1 Excavator
    Komatsu PC600-8R1

    Price Available Soon

    Particulars Komatsu PC500LC-10R Komatsu PC600-8R1

    Komatsu PC500LC-10R vs Komatsu PC600-8R1: Which One Should You Buy?

    Both are big excavators for heavy work like mining, quarry and large project sites. The tables on this page give you all the numbers. The real question is which one fits your work. The Komatsu PC500LC-10R is a little smaller and lighter. It costs less to run and is easier to move from site to site. It is a good choice if your work is steady but not the very hardest. The Komatsu PC600-8R1 is bigger and has more power. It digs harder and fills more in each pass. It suits deep mining and big rock work where you must move a lot of material every day.

    Before you buy, think about a few simple things. Is a Komatsu service centre near your site? Can your low-bed trailer carry the machine's weight? How much diesel will it use each day? For a contractor or fleet, these things decide your profit more than a few extra HP. You can see the full Komatsu excavator range, read our excavator applications guide, or look at all machines in the excavator category.

    Komatsu PC500LC-10R Large Excavator

    Pros:

    • High productivity with efficient mining and earthmoving capabilities
    • Substantial engine power of 362 HP for demanding tasks
    • GPS as standard feature for enhanced operation and fleet management
    • Generous bucket capacity of up to 3.7 m³ for large volume excavation
    • Relatively higher ground bearing pressure of 86.5 kPa which may indicate better stability

    Cons:

    • Lower engine power compared to the PC600-8R1 model
    • Smaller fuel tank capacity of 640 L may require more frequent refueling
    • Lesser maximum digging reach than PC600-8R1

    Komatsu PC600-8R1 Extra Large Excavator

    Pros:

    • Exceptionally powerful engine with 433 HP suitable for the most rigorous tasks
    • Higher fuel capacity of 880 L for extended operation periods
    • Larger bucket capacity options going up to 3.5 m³, ideal for heavy-duty mining
    • Equipped with a larger boom and arm for greater reach and depth
    • Stronger tracking force of 415 kN for tough terrain

    Cons:

    • Heavier operating weight could limit maneuverability in certain conditions
    • Ground bearing pressure is greater, possibly affecting operation on softer grounds
    • Slightly lower bucket digging force compared to PC500LC-10R

    Pros:

    Cons:

    Closing Recommendation

    For operations necessitating maximal power and reach, the Komatsu PC600-8R1 is the superior option, given its higher horsepower and larger dimensions. The Komatsu PC500LC-10R, while less powerful, offers a balance between efficiency and size which may be preferable for operations with space constraints or less intensive digging demands.

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Price, Technical Specifications & Features

    Brand L&T Komatsu Excavator L&T Komatsu Excavator
    Type Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Operating Cost Price Available Soon Price Available Soon
    Price Price Available Soon Price Available Soon
    Weight 51300Kg 61900 Kg
    Bucket 3.5 - 3.7 m³ 2 - 3.5 m³
    Max Digging Depth 6640 mm 8490 mm
    Engine Komatsu 362 HP Komatsu 433 HP
    Warranty 1 Yr. / 3000 hr. 1 Yr. / 3000 hr.
    Boom 6670 mm 7660 mm
    Quick Overview:

    The Komatsu PC500LC-10R is a 52-ton class hydraulic excavator designed for heavy-duty mining, quarrying, and significant infrastructure projects. It offers reliable and powerful performance thanks to a Komatsu diesel engine that produces around 362 HP at 1,900 rpm. Operating at 49,400 kg to 51,300 kg, it maintains excellent stability on tough terrain, providing a solid base for high-load operations. Its large bucket capacity ranges from 3.5 m³ to 3.7 m³, with options up to 4.0 m³, enabling efficient handling of high material volumes in demanding applications. The maximum digging depth reaches up to approximately 6,640 mm, depending on boom and arm configurations, along with strong breakout forces that enhance productivity. The heavy-duty main frame, reinforced structures, and improved swing circle durability make this Komatsu excavator well-suited for harsh mining and quarry conditions. Advanced hydraulic systems combined with variable engine speed matching cut fuel consumption while maintaining fast, precise cycle times during shifts. A spacious cabin, rear-view monitoring system, and intelligent diagnostics improve operator safety, comfort, and maintenance efficiency. KOMTRAX remote monitoring further enhances machine management and reduces downtime during long operational periods. Easy maintenance access at ground level simplifies servicing and keeps the machine running smoothly. This excavator from Komatsu Construction Equipment is a powerful and reliable choice for large mining contractors and quarry operators looking for high productivity and fuel efficiency on a large scale.

    The Komatsu PC600 is a 60-ton class hydraulic excavator built for heavy mining, quarrying, overburden removal, and large infrastructure projects. It delivers consistent and powerful performance thanks to its Komatsu SAA6D140E-5 diesel engine, which produces about 433 HP at 1,800 rpm. With an operating weight of 59,000 to 61,900 kg, this Komatsu excavator offers great stability and a solid base for demanding high-load tasks. The bucket capacity ranges from 2.0 to 3.5 m³, with larger options depending on the configuration, allowing for efficient handling of large material volumes per cycle. It can reach a maximum digging depth of 8.3 metres, depending on the boom and arm configuration, making it capable of deep and aggressive excavation. Constructed with high-strength steel, a reinforced undercarriage, and heavy-duty components, it is built to endure harsh site conditions and minimize downtime. Multiple working modes in its advanced hydraulic system offer smooth, precise control and faster cycle times, boosting overall productivity. Features like KOMTRAX remote monitoring, fuel-efficient operating modes, and a spacious operator cabin with advanced controls improve machine management and comfort on site. Ground-level maintenance access and better filtration systems further enhance serviceability and reduce operating costs. This excavator from Komatsu Construction Equipment is a reliable choice for mining contractors and quarry operators in India who need high output and consistent heavy-duty performance.
    Agency review

    Planning to buy the Komatsu PC500LC-10R Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Komatsu PC600-8R1 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Komatsu PC500LC-10R vs Komatsu PC600-8R1: Which One Should You Buy?

    Both are big excavators for heavy work like mining, quarry and large project sites. The tables on this page give you all the numbers. The real question is which one fits your work. The Komatsu PC500LC-10R is a little smaller and lighter. It costs less to run and is easier to move from site to site. It is a good choice if your work is steady but not the very hardest. The Komatsu PC600-8R1 is bigger and has more power. It digs harder and fills more in each pass. It suits deep mining and big rock work where you must move a lot of material every day.

    Before you buy, think about a few simple things. Is a Komatsu service centre near your site? Can your low-bed trailer carry the machine's weight? How much diesel will it use each day? For a contractor or fleet, these things decide your profit more than a few extra HP. You can see the full Komatsu excavator range, read our excavator applications guide, or look at all machines in the excavator category.

    Komatsu PC500LC-10R Large Excavator

    Pros:

    • High productivity with efficient mining and earthmoving capabilities
    • Substantial engine power of 362 HP for demanding tasks
    • GPS as standard feature for enhanced operation and fleet management
    • Generous bucket capacity of up to 3.7 m³ for large volume excavation
    • Relatively higher ground bearing pressure of 86.5 kPa which may indicate better stability

    Cons:

    • Lower engine power compared to the PC600-8R1 model
    • Smaller fuel tank capacity of 640 L may require more frequent refueling
    • Lesser maximum digging reach than PC600-8R1

    Komatsu PC600-8R1 Extra Large Excavator

    Pros:

    • Exceptionally powerful engine with 433 HP suitable for the most rigorous tasks
    • Higher fuel capacity of 880 L for extended operation periods
    • Larger bucket capacity options going up to 3.5 m³, ideal for heavy-duty mining
    • Equipped with a larger boom and arm for greater reach and depth
    • Stronger tracking force of 415 kN for tough terrain

    Cons:

    • Heavier operating weight could limit maneuverability in certain conditions
    • Ground bearing pressure is greater, possibly affecting operation on softer grounds
    • Slightly lower bucket digging force compared to PC500LC-10R

    Pros:

    Cons:

    Closing Recommendation

    For operations necessitating maximal power and reach, the Komatsu PC600-8R1 is the superior option, given its higher horsepower and larger dimensions. The Komatsu PC500LC-10R, while less powerful, offers a balance between efficiency and size which may be preferable for operations with space constraints or less intensive digging demands.

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Price, Technical Specifications & Features

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Brand
    L&T Komatsu Excavator L&T Komatsu Excavator
    Type
    Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Weight
    51300Kg 61900 Kg
    Bucket
    3.5 - 3.7 m³ 2 - 3.5 m³
    Max Digging Depth
    6640 mm 8490 mm
    Engine
    Komatsu 362 HP Komatsu 433 HP
    Warranty
    1 Yr. / 3000 hr. 1 Yr. / 3000 hr.
    Boom
    6670 mm 7660 mm
    Quick Overview:

    The Komatsu PC500LC-10R is a 52-ton class hydraulic excavator designed for heavy-duty mining, quarrying, and significant infrastructure projects. It offers reliable and powerful performance thanks to a Komatsu diesel engine that produces around 362 HP at 1,900 rpm. Operating at 49,400 kg to 51,300 kg, it maintains excellent stability on tough terrain, providing a solid base for high-load operations. Its large bucket capacity ranges from 3.5 m³ to 3.7 m³, with options up to 4.0 m³, enabling efficient handling of high material volumes in demanding applications. The maximum digging depth reaches up to approximately 6,640 mm, depending on boom and arm configurations, along with strong breakout forces that enhance productivity. The heavy-duty main frame, reinforced structures, and improved swing circle durability make this Komatsu excavator well-suited for harsh mining and quarry conditions. Advanced hydraulic systems combined with variable engine speed matching cut fuel consumption while maintaining fast, precise cycle times during shifts. A spacious cabin, rear-view monitoring system, and intelligent diagnostics improve operator safety, comfort, and maintenance efficiency. KOMTRAX remote monitoring further enhances machine management and reduces downtime during long operational periods. Easy maintenance access at ground level simplifies servicing and keeps the machine running smoothly. This excavator from Komatsu Construction Equipment is a powerful and reliable choice for large mining contractors and quarry operators looking for high productivity and fuel efficiency on a large scale.

    The Komatsu PC600 is a 60-ton class hydraulic excavator built for heavy mining, quarrying, overburden removal, and large infrastructure projects. It delivers consistent and powerful performance thanks to its Komatsu SAA6D140E-5 diesel engine, which produces about 433 HP at 1,800 rpm. With an operating weight of 59,000 to 61,900 kg, this Komatsu excavator offers great stability and a solid base for demanding high-load tasks. The bucket capacity ranges from 2.0 to 3.5 m³, with larger options depending on the configuration, allowing for efficient handling of large material volumes per cycle. It can reach a maximum digging depth of 8.3 metres, depending on the boom and arm configuration, making it capable of deep and aggressive excavation. Constructed with high-strength steel, a reinforced undercarriage, and heavy-duty components, it is built to endure harsh site conditions and minimize downtime. Multiple working modes in its advanced hydraulic system offer smooth, precise control and faster cycle times, boosting overall productivity. Features like KOMTRAX remote monitoring, fuel-efficient operating modes, and a spacious operator cabin with advanced controls improve machine management and comfort on site. Ground-level maintenance access and better filtration systems further enhance serviceability and reduce operating costs. This excavator from Komatsu Construction Equipment is a reliable choice for mining contractors and quarry operators in India who need high output and consistent heavy-duty performance.

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Key Highlights

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Engine Make Komatsu SAA6D125E-5 Komatsu SAA6D140E-5
    Fuel Tank 640 L 880 L
    Engine Displacment 11.04 L 15.24 L
    Under Carriage 5385 mm 5340 mm
    Hydraulic System NA NA
    Arm 2400 mm 3500 mm
    Max Digging Reach 10945 mm 13020 mm
    Fuel Consumption NA NA
    Overall Width 3580 mm 4210 mm
    Overall Length 11945 mm 12960 mm
    Bucket Digging Force 304 kN 264 kN
    Tailswing Radius 3765 mm 3950 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Optional Optional
    GPS Standard Standard

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Key Highlights

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Engine Make
    Komatsu SAA6D125E-5 Komatsu SAA6D140E-5
    Fuel Tank
    640 L 880 L
    Engine Displacment
    11.04 L 15.24 L
    Under Carriage
    5385 mm 5340 mm
    Hydraulic System
    NA NA
    Arm
    2400 mm 3500 mm
    Max Digging Reach
    10945 mm 13020 mm
    Fuel Consumption
    NA NA
    Overall Width
    3580 mm 4210 mm
    Overall Length
    11945 mm 12960 mm
    Bucket Digging Force
    304 kN 264 kN
    Tailswing Radius
    3765 mm 3950 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Specifications

    Engine

    3588 3589
    Model Komatsu 362 HP Komatsu 433 HP
    Fuel Diesel Diesel
    Type 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled
    Rated Engine Power 362 HP (270 kW) @ 1900 rpm 433 HP (323 kW) @ 1800 rpm
    Maximum Torque NA NA
    Piston Displacement 11.04 L 15.24 L
    Alternator NA 24V / 50A
    Battery NA 170 Ah , 2 x 12V
    Starting Motor NA 11 kW

    Undercarriage

    11 kW 11 kW
    No of Top rollers 2 3
    No of bottom rollers 8 8 , 9
    Track Shoes (Each Side) 49 49 , 52
    Track Guard NA NA
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure 86.5 kPa 104.9 kPa
    Track Tensioning Grease Grease
    Gradeability 70% (35 °) 70%
    Travel Speed-Low 3.0 Km/h 3.0 Km/h
    Travel Speed-High 5.5 Km/h 4.9 Km/h
    Max Tracking Force 329 kN 415 kN

    Hydraulic System

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Hydraulic pump Variable displacement piston type. Variable-capacity piston pumps
    Maximum Flow 690 L/min 2 x 410 L/min
    Pilot Pump Gear Pump Gear Pump
    Implement Circuit 37.3 MPa 31.9 MPa
    Swing Circuit 27.9 MPa 25.5 MPa
    Travel circuit 37.3 MPa 34.3 MPa
    Pilot circuit 3.2 MPa 2.9 MPa

    Hydraulic Motors

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Travel 2 x axial piston motor with parking brake 2 x axial piston motor with parking brake
    Swing 1 x axial piston motor with swing holding brake 2 x axial piston motor with swing holding brake

    Service Capacities

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Fuel tank 640 L 880 L
    Engine Coolant 45.0 L 58 L
    Engine oil 37.0 L 40 L
    Hydraulic system NA NA
    Hydraulic tank 279 L 360 L

    Machine Weight

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Operating Weight 51300Kg 61900 Kg

    Working Range

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Boom length 6670 mm 7660 mm
    Arm length 2400 mm 3500 mm
    Max Digging Reach 10945 mm 13020 mm
    Max Digging Reach on ground 10720 mm 12800 mm
    Max digging depth 6640 mm 8490 mm
    Max digging height 10200 mm 11880 mm
    Max Dump Height 6675 mm 7960 mm
    Max vertical wallcut depth 2495 mm 7510 mm
    Min swing radius 4720 mm 5370 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 304 kN 264 kN
    Arm Digging Force 262 kN 222 kN
    Swing Speed 9.1 rpm 8.3 rpm

    Dozer Blade

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Bucket Capacity 3.5 - 3.7 m³ 2 - 3.5 m³

    Static Dimensions

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Overall Length 11945 mm 12960 mm
    Overall width 3580 mm 4210 mm
    Overall Height 3980 mm 4300 mm
    Overall Height of Cab 3110 mm 3435 mm
    Upper Width 3520 mm 3170 mm
    Track Lengh on Ground 4350 mm 4250 mm
    Undercarriage overall length 5385 mm 5340 mm
    Tailswing radius 3765 mm 3950 mm
    Min Ground clearance 570 mm 780 mm
    Track gauge 2740 mm 2590 mm
    Width over tracks 3340 mm 3190 mm
    Track Height NA NA
    Counterweight Clearance 1385 mm 1365 mm
    Track Shoe Width 600 mm 600 mm

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 Excavator Specifications

    Engine

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Model
    Komatsu 362 HP Komatsu 433 HP
    Fuel
    Diesel Diesel
    Type
    4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled
    Rated Engine Power
    362 HP (270 kW) @ 1900 rpm 433 HP (323 kW) @ 1800 rpm
    Maximum Torque
    NA NA
    Piston Displacement
    11.04 L 15.24 L
    Alternator
    NA 24V / 50A
    Battery
    NA 170 Ah , 2 x 12V
    Starting Motor
    NA 11 kW

    Undercarriage

    Komatsu PC500LC-10R Komatsu PC600-8R1
    No of Top rollers
    2 3
    No of bottom rollers
    8 8 , 9
    Track Shoes (Each Side)
    49 49 , 52
    Track Guard
    NA NA
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    86.5 kPa 104.9 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    70% (35 °) 70%
    Travel Speed-Low
    3.0 Km/h 3.0 Km/h
    Travel Speed-High
    5.5 Km/h 4.9 Km/h
    Max Tracking Force
    329 kN 415 kN

    Hydraulic Motors

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Hydraulic pump
    Variable displacement piston type. Variable-capacity piston pumps
    Maximum Flow
    690 L/min 2 x 410 L/min
    Pilot Pump
    Gear Pump Gear Pump
    Implement Circuit
    37.3 MPa 31.9 MPa
    Swing Circuit
    27.9 MPa 25.5 MPa
    Travel circuit
    37.3 MPa 34.3 MPa
    Pilot circuit
    3.2 MPa 2.9 MPa

    Service Capacities

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Fuel tank
    640 L 880 L
    Engine Coolant
    45.0 L 58 L
    Engine oil
    37.0 L 40 L
    Hydraulic system
    NA NA
    Hydraulic tank
    279 L 360 L

    Machine Weight

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Operating Weight
    51300Kg 61900 Kg

    Working Range

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Boom length
    6670 mm 7660 mm
    Arm length
    2400 mm 3500 mm
    Max Digging Reach
    10945 mm 13020 mm
    Max Digging Reach on ground
    10720 mm 12800 mm
    Max digging depth
    6640 mm 8490 mm
    Max digging height
    10200 mm 11880 mm
    Max Dump Height
    6675 mm 7960 mm
    Max vertical wallcut depth
    2495 mm 7510 mm
    Min swing radius
    4720 mm 5370 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    304 kN 264 kN
    Arm Digging Force
    262 kN 222 kN
    Swing Speed
    9.1 rpm 8.3 rpm

    Dozer Blade

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Bucket Capacity
    3.5 - 3.7 m³ 2 - 3.5 m³

    Static Dimensions

    Komatsu PC500LC-10R Komatsu PC600-8R1
    Overall Length
    11945 mm 12960 mm
    Overall width
    3580 mm 4210 mm
    Overall Height
    3980 mm 4300 mm
    Overall Height of Cab
    3110 mm 3435 mm
    Upper Width
    3520 mm 3170 mm
    Track Lengh on Ground
    4350 mm 4250 mm
    Undercarriage overall length
    5385 mm 5340 mm
    Tailswing radius
    3765 mm 3950 mm
    Min Ground clearance
    570 mm 780 mm
    Track gauge
    2740 mm 2590 mm
    Width over tracks
    3340 mm 3190 mm
    Track Height
    NA NA
    Counterweight Clearence
    1385 mm 1365 mm
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with Komatsu PC500LC-10R

    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Liebherr R 960 SME Litronic Mining Excavator | Desi Machines
    Liebherr Liebherr R 960 SME Litronic
    4.5 rating
    Price Available Soon
    60000 Kg
    Compare
    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Liebherr R 956 Litronic Mining Excavator | Desi Machines
    Liebherr Liebherr R 956 Litronic
    4.5 rating
    Price Available Soon
    53100 Kg
    Compare
    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    SANY SY580C-10HD Excavator
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Compare
    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Volvo EC550E mining excavator
    Volvo Volvo EC550E
    4.5 rating
    ₹2.30- 2.80 crore
    54500 Kg
    Compare
    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Tata Hitachi ZAXIS 650H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Compare
    VS
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    L&T LT-300 Excavator
    L&T Komatsu L&T LT-300
    4.5 rating
    Price Available Soon
    61450 Kg
    Compare

    Popular Comparisons with Komatsu PC600-8R1

    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    SANY SY680C-10HD Excavator
    SANY SANY SY680C-10HD
    4.5 rating
    Price Available Soon
    63620 kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Liugong 965E HD Excavator
    LiuGong Liugong 965E HD
    4.5 rating
    ₹1.25- 1.35 crore
    62600 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    CAT 374 Excavator
    Caterpillar CAT 374
    4.5 rating
    Price Available Soon
    74000 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    BEML BE700 Excavator
    BEML BEML BE700
    4.5 rating
    Price Available Soon
    69500 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Liebherr R 972 Litronic Mining Excavator
    Liebherr Liebherr R 972 Litronic
    4.5 rating
    Price Available Soon
    68450 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Liebherr R 960 SME Litronic Mining Excavator | Desi Machines
    Liebherr Liebherr R 960 SME Litronic
    4.5 rating
    Price Available Soon
    60000 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Liebherr R 956 Litronic Mining Excavator | Desi Machines
    Liebherr Liebherr R 956 Litronic
    4.5 rating
    Price Available Soon
    53100 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    SANY SY580C-10HD Excavator
    SANY SANY SY580C-10HD
    4.5 rating
    ₹1.50 - 1.70 crore
    52000 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Volvo EC750D mining excavator
    Volvo Volvo EC750D
    4.5 rating
    ₹3.5 - 4.0 crore
    72700 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Volvo EC550E mining excavator
    Volvo Volvo EC550E
    4.5 rating
    ₹2.30- 2.80 crore
    54500 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Tata Hitachi ZAXIS 670H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 670H
    4.5 rating
    Price Available Soon
    63500 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Tata Hitachi ZAXIS 650H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 650H
    4.5 rating
    Price Available Soon
    58340 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    L&T LT-300 Excavator
    L&T Komatsu L&T LT-300
    4.5 rating
    Price Available Soon
    61450 Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Komatsu PC500LC-10R Excavator Price in India
    L&T Komatsu Komatsu PC500LC-10R
    4.5 rating
    Price Available Soon
    51300Kg
    Compare
    VS
    Komatsu PC600-8R1 Excavator
    L&T Komatsu Komatsu PC600-8R1
    4.5 rating
    Price Available Soon
    61900 Kg
    Komatsu PC800-8R Excavator
    L&T Komatsu Komatsu PC800-8R
    4.5 rating
    Price Available Soon
    74200 Kg
    Compare

    Frequently Asked Question

    Ans.

    The PC500LC-10R is cheaper to run each day. It is smaller, so it uses less diesel for most jobs. The PC600-8R1 has more power, so it burns more fuel. For steady work, the PC500LC-10R saves you money on diesel over a full month. Pick the PC600-8R1 only when the extra power is really needed.

    Ans.

    The PC500LC-10R is usually easier to sell later. More contractors want a machine in its size class, so buyers are easy to find. The PC600-8R1 is a special heavy machine, so fewer buyers look for it, but it holds value well for big mining companies. If you want a quick and simple sale later, the PC500LC-10R is the safer choice.

    Ans.

    Yes, for both machines. Komatsu has service support across India through L&T Komatsu. Before you buy, check how far the nearest service centre is from your site. A centre close by means less waiting when a part is needed and less lost work. This matters most for fleet and EPC companies running many machines.

    Ans.

    It can be, if your work is not very heavy. The PC600-8R1 is a very large machine. It shines in deep mining and hard rock, where it fills trucks fast. But for normal earthwork and steady projects, it costs more to run and is harder to move. If your daily work is not the hardest, the PC500LC-10R is usually enough.

    Ans.

    Both are heavy and need a strong low-bed trailer and a permit to move on roads. The PC600-8R1 is heavier, so moving it costs more and takes more planning. The PC500LC-10R is lighter and easier to shift. If your machine must move often between sites, the lighter PC500LC-10R will save you time and money.

    Ans.

    Yes, very easily. Banks, finance companies and equipment dealers all give loans for big excavators. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders before you decide. Do not take the first EMI offer you get.

    Komatsu PC500LC-10R Vs Komatsu PC600-8R1 - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu PC500LC-10R Vs Komatsu PC600-8R1 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare