Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    Komatsu PC850-8R1 VS CAT 395 Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Komatsu PC850-8R1CAT 395
    Komatsu PC850-8R1 VS CAT 395 Excavator
    Komatsu PC850-8R1 Excavator
    Komatsu PC850-8R1

    Price Available Soon

    CAT 395 Excavator Price
    CAT 395

    Price Available Soon

    Particulars Komatsu PC850-8R1 CAT 395

    Cat 395 vs Komatsu PC850-8R1: Which Big Digger Should You Buy?

    Both machines are large excavators for mining, quarry and big earthwork jobs. The tables below give you all the numbers. The real question is which one fits your work and your site. The Cat 395 is heavier and has more engine power. It has a bigger bucket. So it moves more material in each pass. This helps on hard rock and high-output mining work. The Komatsu PC850-8R1 is a little lighter and digs deeper. It works well on trenching, slopes and softer ground. It also uses less fuel because the engine is smaller.

    Before you buy, think about a few simple things. Which dealer has a service centre close to your site? Which brand can send a mechanic fast when the machine stops? How much diesel will it burn each day? These things decide your real cost, not just the specs. You can see the full Cat excavator range and the Komatsu excavator range, and read our excavator applications guide to match the machine to your job.

    CAT 395 - Heavy-Duty Excavator

    Pros:

    • High engine power of 543 HP for demanding tasks.
    • Big capacity fuel tank (1220 L) for longer operational hours.
    • Larger bucket size (6.5 m³) to move more material in each cycle.
    • Robust arm and boom strength with bucket digging force of 497 kN and arm digging force of 394 kN.

    Cons:

    • Heavier operating weight (94100 Kg) could affect transportability and maneuverability.
    • GPS is standard but AC Cabin is not explicitly stated as standard or optional, which might be crucial for operator comfort.

    Komatsu PC850-8R1 - High Performance Excavator

    Pros:

    • Features like pilot pumps, two axial piston motors for travel, and dedicated swing holding brake indicates advanced hydraulic control.
    • Greater gradeability (70%) which is beneficial for sloped terrain.
    • Higher swing speed (6.8 rpm) for rapid job cycle times.
    • Variable bucket capacity (3.40 - 4.30 m³) providing flexibility for different types of work.

    Cons:

    • Smaller fuel tank (980 L) compared to the CAT 395, possibly requiring more frequent refueling.
    • Lower engine power (496 HP) and bucket digging force (363 kN) which may reduce efficiency in extremely heavy-duty tasks.

    Pros:

    Cons:

    Closing Recommendation

    Both excavators have strengths in different areas. For projects requiring larger material movement per cycle and higher power, the CAT 395 could be the better option. If the work involves moving on slopes or requires a mix of bucket sizes and sophisticated hydraulic capabilities, the Komatsu PC850-8R1 would be preferable. Consider the specifics of the project and the importance of fuel capacity, engine power, and hydraulic features to make the best selection.

    Komatsu PC850-8R1 Vs CAT 395 Excavator Price, Technical Specifications & Features

    Brand L&T Komatsu Excavator Caterpillar Excavator
    Type Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Operating Cost Price Available Soon Price Available Soon
    Price Price Available Soon Price Available Soon
    Weight 79000 Kg 94100 Kg
    Bucket 3.40 - 4.30 m³ 6.5 m³
    Max Digging Depth 8445 mm 7190 mm
    Engine Komatsu 496 HP Cat 543 HP
    Warranty 1 Yr. / 3000 hr. 1 Year
    Boom 8040 mm 7500 mm
    Quick Overview:

    The Komatsu PC850-8R1 is an 80-ton class ultra-heavy hydraulic excavator built for coal mining, iron ore extraction, quarrying, and large-scale overburden removal. Its consistent performance is powered by a Komatsu SAA6D140E-5 diesel engine that generates about 496 HP at 1,800 rpm. Weighing between 78,600 and 79,000 kg, it offers excellent stability and a robust platform for the largest and most challenging mining operations. With a bucket capacity ranging from 3.4 to 4.30 m³, it effectively handles bulk material in high-production mining conditions throughout each shift. This Komatsu excavator can reach a maximum digging depth of approximately 8.4 metres, allowing for deep excavation with high breakout force and superior productivity under tough conditions. Economy and power modes in Komatsu’s advanced hydraulic system ensure smooth, precise control and optimized fuel efficiency in all operations. Reinforced boom and arm components, heavy-duty undercarriage, and robust construction effectively handle harsh mining environments with minimal downtime. Features like KOMTRAX remote monitoring, rear-view safety systems, and easy maintenance access improve machine management and operator comfort on active sites. Durable, wear-resistant components and improved filtration systems extend the machine’s life and lessen servicing intervals during long projects. This excavator from Komatsu Construction Equipment is a highly productive and effective choice for large mining contractors dealing with coal extraction and overburden removal across India.

    The CAT 395 is an approximately 95-ton extra-large hydraulic crawler excavator made for open-pit mining, mass earthmoving, and the largest infrastructure projects in India. This excavator from Caterpillar Construction Equipment features a Cat C18 engine that provides 543 HP while using up to 15% less fuel than earlier large excavator models under similar conditions. Weighing around 94,100 kg, it delivers 10% more swing torque and stick force than the 390F it replaces. The maximum digging depth of 7,380 mm allows for deep pit work in standard configuration. A bucket capacity of 6.5 m³ can load a 70-tonne truck in five to six passes, significantly lowering the cost per tonne. The exclusive hydrostatic swing circuit uses a bi-directional swing pump and a charge accumulator for smooth, energy-efficient multitasking. Power, Smart, and Eco modes give operators control over fuel use across different work conditions. Standard features include Factory-fitted Caterpillar Payload, Cat Grade with 2D, Lift Assist, 2D E-Fence, and Work Tool Recognition. The cab offers a large touchscreen, automatic climate control, Operator ID keyless start, and standard rear and side cameras. Synchronized service intervals help cut maintenance costs by up to 20% compared to the previous model. The 1,220-litre fuel tank enables uninterrupted long shifts on remote project sites. This heavy-duty CAT excavator is considered a standard machine for large mining companies and major earthmoving contractors aiming for high production volumes in India.

    Agency review

    Planning to buy the Komatsu PC850-8R1 Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the CAT 395 Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Cat 395 vs Komatsu PC850-8R1: Which Big Digger Should You Buy?

    Both machines are large excavators for mining, quarry and big earthwork jobs. The tables below give you all the numbers. The real question is which one fits your work and your site. The Cat 395 is heavier and has more engine power. It has a bigger bucket. So it moves more material in each pass. This helps on hard rock and high-output mining work. The Komatsu PC850-8R1 is a little lighter and digs deeper. It works well on trenching, slopes and softer ground. It also uses less fuel because the engine is smaller.

    Before you buy, think about a few simple things. Which dealer has a service centre close to your site? Which brand can send a mechanic fast when the machine stops? How much diesel will it burn each day? These things decide your real cost, not just the specs. You can see the full Cat excavator range and the Komatsu excavator range, and read our excavator applications guide to match the machine to your job.

    CAT 395 - Heavy-Duty Excavator

    Pros:

    • High engine power of 543 HP for demanding tasks.
    • Big capacity fuel tank (1220 L) for longer operational hours.
    • Larger bucket size (6.5 m³) to move more material in each cycle.
    • Robust arm and boom strength with bucket digging force of 497 kN and arm digging force of 394 kN.

    Cons:

    • Heavier operating weight (94100 Kg) could affect transportability and maneuverability.
    • GPS is standard but AC Cabin is not explicitly stated as standard or optional, which might be crucial for operator comfort.

    Komatsu PC850-8R1 - High Performance Excavator

    Pros:

    • Features like pilot pumps, two axial piston motors for travel, and dedicated swing holding brake indicates advanced hydraulic control.
    • Greater gradeability (70%) which is beneficial for sloped terrain.
    • Higher swing speed (6.8 rpm) for rapid job cycle times.
    • Variable bucket capacity (3.40 - 4.30 m³) providing flexibility for different types of work.

    Cons:

    • Smaller fuel tank (980 L) compared to the CAT 395, possibly requiring more frequent refueling.
    • Lower engine power (496 HP) and bucket digging force (363 kN) which may reduce efficiency in extremely heavy-duty tasks.

    Pros:

    Cons:

    Closing Recommendation

    Both excavators have strengths in different areas. For projects requiring larger material movement per cycle and higher power, the CAT 395 could be the better option. If the work involves moving on slopes or requires a mix of bucket sizes and sophisticated hydraulic capabilities, the Komatsu PC850-8R1 would be preferable. Consider the specifics of the project and the importance of fuel capacity, engine power, and hydraulic features to make the best selection.

    Komatsu PC850-8R1 Vs CAT 395 Excavator Price, Technical Specifications & Features

    Komatsu PC850-8R1 CAT 395
    Brand
    L&T Komatsu Excavator Caterpillar Excavator
    Type
    Extra-Large (>50 Ton) Extra-Large (>50 Ton)
    Price
    Price Available Soon Price Available Soon
    Weight
    79000 Kg 94100 Kg
    Bucket
    3.40 - 4.30 m³ 6.5 m³
    Max Digging Depth
    8445 mm 7190 mm
    Engine
    Komatsu 496 HP Cat 543 HP
    Warranty
    1 Yr. / 3000 hr. 1 Year
    Boom
    8040 mm 7500 mm
    Quick Overview:

    The Komatsu PC850-8R1 is an 80-ton class ultra-heavy hydraulic excavator built for coal mining, iron ore extraction, quarrying, and large-scale overburden removal. Its consistent performance is powered by a Komatsu SAA6D140E-5 diesel engine that generates about 496 HP at 1,800 rpm. Weighing between 78,600 and 79,000 kg, it offers excellent stability and a robust platform for the largest and most challenging mining operations. With a bucket capacity ranging from 3.4 to 4.30 m³, it effectively handles bulk material in high-production mining conditions throughout each shift. This Komatsu excavator can reach a maximum digging depth of approximately 8.4 metres, allowing for deep excavation with high breakout force and superior productivity under tough conditions. Economy and power modes in Komatsu’s advanced hydraulic system ensure smooth, precise control and optimized fuel efficiency in all operations. Reinforced boom and arm components, heavy-duty undercarriage, and robust construction effectively handle harsh mining environments with minimal downtime. Features like KOMTRAX remote monitoring, rear-view safety systems, and easy maintenance access improve machine management and operator comfort on active sites. Durable, wear-resistant components and improved filtration systems extend the machine’s life and lessen servicing intervals during long projects. This excavator from Komatsu Construction Equipment is a highly productive and effective choice for large mining contractors dealing with coal extraction and overburden removal across India.

    The CAT 395 is an approximately 95-ton extra-large hydraulic crawler excavator made for open-pit mining, mass earthmoving, and the largest infrastructure projects in India. This excavator from Caterpillar Construction Equipment features a Cat C18 engine that provides 543 HP while using up to 15% less fuel than earlier large excavator models under similar conditions. Weighing around 94,100 kg, it delivers 10% more swing torque and stick force than the 390F it replaces. The maximum digging depth of 7,380 mm allows for deep pit work in standard configuration. A bucket capacity of 6.5 m³ can load a 70-tonne truck in five to six passes, significantly lowering the cost per tonne. The exclusive hydrostatic swing circuit uses a bi-directional swing pump and a charge accumulator for smooth, energy-efficient multitasking. Power, Smart, and Eco modes give operators control over fuel use across different work conditions. Standard features include Factory-fitted Caterpillar Payload, Cat Grade with 2D, Lift Assist, 2D E-Fence, and Work Tool Recognition. The cab offers a large touchscreen, automatic climate control, Operator ID keyless start, and standard rear and side cameras. Synchronized service intervals help cut maintenance costs by up to 20% compared to the previous model. The 1,220-litre fuel tank enables uninterrupted long shifts on remote project sites. This heavy-duty CAT excavator is considered a standard machine for large mining companies and major earthmoving contractors aiming for high production volumes in India.

    Komatsu PC850-8R1 Vs CAT 395 Excavator Key Highlights

    Komatsu PC850-8R1 CAT 395
    Engine Make Komatsu SAA6D140E-5 Cat C18
    Fuel Tank 980 L 1220 L
    Engine Displacment 15.24 ltr 18.1 L
    Under Carriage 5810 mm 6350 mm
    Hydraulic System NA 740 L
    Arm 3600 mm 2920 mm
    Max Digging Reach 13660 mm NA
    Fuel Consumption NA NA
    Overall Width 4280 mm 3690 mm
    Overall Length 13995 mm 13980 mm
    Bucket Digging Force 363 kN 497 kN
    Tailswing Radius 4345 mm 4840 mm
    Track Shoe Width 610 mm 650 mm
    AC Cabin Optional Standard
    GPS Standard Standard

    Komatsu PC850-8R1 Vs CAT 395 Excavator Key Highlights

    Komatsu PC850-8R1 CAT 395
    Engine Make
    Komatsu SAA6D140E-5 Cat C18
    Fuel Tank
    980 L 1220 L
    Engine Displacment
    15.24 ltr 18.1 L
    Under Carriage
    5810 mm 6350 mm
    Hydraulic System
    NA 740 L
    Arm
    3600 mm 2920 mm
    Max Digging Reach
    13660 mm NA
    Fuel Consumption
    NA NA
    Overall Width
    4280 mm 3690 mm
    Overall Length
    13995 mm 13980 mm
    Bucket Digging Force
    363 kN 497 kN
    Tailswing Radius
    4345 mm 4840 mm
    Track Shoe Width
    610 mm 650 mm
    AC Cabin
    Optional Standard
    GPS
    Standard Standard

    Komatsu PC850-8R1 Vs CAT 395 Excavator Specifications

    Engine

    3591 8860
    Model Komatsu 496 HP Cat 543 HP
    Fuel Diesel Diesel
    Type 4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled NA
    Rated Engine Power 496 HP (370 kW) @ 1800 rpm 543 HP (405 kW)
    Maximum Torque NA NA
    Piston Displacement 15.24 ltr 18.1 L
    Alternator 24V / 60A NA
    Battery 170 Ah , 2 x 12V NA
    Starting Motor 11kW NA

    Undercarriage

    NA NA
    No of Top rollers 3 NA
    No of bottom rollers 8 NA
    Track Shoes (Each Side) 47 NA
    Track Guard NA NA
    Track Shoe width 610 mm 650 mm
    Ground bearing pressure 128 kPa NA
    Track Tensioning Grease Grease
    Gradeability 70% NA
    Travel Speed-Low 2.8 Km/h NA
    Travel Speed-High 4.2 Km/h NA
    Max Tracking Force 559 kN NA

    Hydraulic System

    Komatsu PC850-8R1 CAT 395
    Hydraulic pump Variable-capacity piston pumps NA
    Maximum Flow 2 x 494 L/min 1064 L/min
    Pilot Pump Gear Pump NA
    Implement Circuit 31.4 MPa 37.0 MPa
    Swing Circuit 28.4 MPa 31.0 MPa
    Travel circuit 34.3 MPa 35.0 MPa
    Pilot circuit 2.9 MPa NA

    Hydraulic Motors

    Komatsu PC850-8R1 CAT 395
    Travel 2 x axial piston motor with parking brake NA
    Swing 2 x axial piston motor with swing holding brake NA

    Service Capacities

    Komatsu PC850-8R1 CAT 395
    Fuel tank 980 L 1220 L
    Engine Coolant 100 L 71 L
    Engine oil 55 L 67 L
    Hydraulic system NA 740 L
    Hydraulic tank 470 L 372 L

    Machine Weight

    Komatsu PC850-8R1 CAT 395
    Operating Weight 79000 Kg 94100 Kg

    Working Range

    Komatsu PC850-8R1 CAT 395
    Boom length 8040 mm 7500 mm
    Arm length 3600 mm 2920 mm
    Max Digging Reach 13660 mm NA
    Max Digging Reach on ground 13400 mm 12260 mm
    Max digging depth 8445 mm 7190 mm
    Max digging height 11955 mm 12370 mm
    Max Dump Height 8235 mm 7960 mm
    Max vertical wallcut depth 5230 mm 4580 mm
    Min swing radius 5985 mm NA
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force 363 kN 497 kN
    Arm Digging Force 298 kN 394 kN
    Swing Speed 6.8 rpm 6.3 rpm

    Dozer Blade

    Komatsu PC850-8R1 CAT 395
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    Komatsu PC850-8R1 CAT 395
    Bucket Capacity 3.40 - 4.30 m³ 6.5 m³

    Static Dimensions

    Komatsu PC850-8R1 CAT 395
    Overall Length 13995 mm 13980 mm
    Overall width 4280 mm 3690 mm
    Overall Height 4850 mm 3670 mm
    Overall Height of Cab 3640 mm NA
    Upper Width 3195 mm NA
    Track Lengh on Ground 4500 mm 5120 mm
    Undercarriage overall length 5810 mm 6350 mm
    Tailswing radius 4345 mm 4840 mm
    Min Ground clearance 840 mm 648 mm
    Track gauge 3500 mm 2750 mm
    Width over tracks 3390 mm NA
    Track Height NA NA
    Counterweight Clearance 1560 mm 1640 mm
    Track Shoe Width 610 mm 650 mm

    Komatsu PC850-8R1 Vs CAT 395 Excavator Specifications

    Engine

    Komatsu PC850-8R1 CAT 395
    Model
    Komatsu 496 HP Cat 543 HP
    Fuel
    Diesel Diesel
    Type
    4 Cycle , 6 Cylinder , After Cooled , Direct Injection Turbo Charged , Water Cooled NA
    Rated Engine Power
    496 HP (370 kW) @ 1800 rpm 543 HP (405 kW)
    Maximum Torque
    NA NA
    Piston Displacement
    15.24 ltr 18.1 L
    Alternator
    24V / 60A NA
    Battery
    170 Ah , 2 x 12V NA
    Starting Motor
    11kW NA

    Undercarriage

    Komatsu PC850-8R1 CAT 395
    No of Top rollers
    3 NA
    No of bottom rollers
    8 NA
    Track Shoes (Each Side)
    47 NA
    Track Guard
    NA NA
    Track Shoe width
    610 mm 650 mm
    Ground bearing pressure
    128 kPa NA
    Track Tensioning
    Grease Grease
    Gradeability
    70% NA
    Travel Speed-Low
    2.8 Km/h NA
    Travel Speed-High
    4.2 Km/h NA
    Max Tracking Force
    559 kN NA

    Hydraulic Motors

    Komatsu PC850-8R1 CAT 395
    Hydraulic pump
    Variable-capacity piston pumps NA
    Maximum Flow
    2 x 494 L/min 1064 L/min
    Pilot Pump
    Gear Pump NA
    Implement Circuit
    31.4 MPa 37.0 MPa
    Swing Circuit
    28.4 MPa 31.0 MPa
    Travel circuit
    34.3 MPa 35.0 MPa
    Pilot circuit
    2.9 MPa NA

    Service Capacities

    Komatsu PC850-8R1 CAT 395
    Fuel tank
    980 L 1220 L
    Engine Coolant
    100 L 71 L
    Engine oil
    55 L 67 L
    Hydraulic system
    NA 740 L
    Hydraulic tank
    470 L 372 L

    Machine Weight

    Komatsu PC850-8R1 CAT 395
    Operating Weight
    79000 Kg 94100 Kg

    Working Range

    Komatsu PC850-8R1 CAT 395
    Boom length
    8040 mm 7500 mm
    Arm length
    3600 mm 2920 mm
    Max Digging Reach
    13660 mm NA
    Max Digging Reach on ground
    13400 mm 12260 mm
    Max digging depth
    8445 mm 7190 mm
    Max digging height
    11955 mm 12370 mm
    Max Dump Height
    8235 mm 7960 mm
    Max vertical wallcut depth
    5230 mm 4580 mm
    Min swing radius
    5985 mm NA
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    363 kN 497 kN
    Arm Digging Force
    298 kN 394 kN
    Swing Speed
    6.8 rpm 6.3 rpm

    Dozer Blade

    Komatsu PC850-8R1 CAT 395
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    Komatsu PC850-8R1 CAT 395
    Bucket Capacity
    3.40 - 4.30 m³ 6.5 m³

    Static Dimensions

    Komatsu PC850-8R1 CAT 395
    Overall Length
    13995 mm 13980 mm
    Overall width
    4280 mm 3690 mm
    Overall Height
    4850 mm 3670 mm
    Overall Height of Cab
    3640 mm NA
    Upper Width
    3195 mm NA
    Track Lengh on Ground
    4500 mm 5120 mm
    Undercarriage overall length
    5810 mm 6350 mm
    Tailswing radius
    4345 mm 4840 mm
    Min Ground clearance
    840 mm 648 mm
    Track gauge
    3500 mm 2750 mm
    Width over tracks
    3390 mm NA
    Track Height
    NA NA
    Counterweight Clearence
    1560 mm 1640 mm
    Track Shoe Width
    610 mm 650 mm

    Popular Comparisons with Komatsu PC850-8R1

    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Tata Hitachi ZAXIS 890LCH
    Tata Hitachi Tata Hitachi ZAXIS 890LCH
    4.5 rating
    Price Available Soon
    84300 kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    SANY SY680C-10HD Excavator
    SANY SANY SY680C-10HD
    4.5 rating
    Price Available Soon
    63620 kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    LiuGong Liugong 975E HD
    4.5 rating
    ₹1.40- 1.55 crore
    75000 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Caterpillar CAT 374
    4.5 rating
    Price Available Soon
    74000 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    BEML BEML BE700
    4.5 rating
    Price Available Soon
    69500 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Liebherr Liebherr R 992 Litronic
    4.5 rating
    Price Available Soon
    85800 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Liebherr Liebherr R 972 Litronic
    4.5 rating
    Price Available Soon
    68450 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Liebherr Liebherr R 978 SME Litronic
    4.5 rating
    Price Available Soon
    78350 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    SANY SANY SY870C-10HD
    4.5 rating
    Price Available Soon
    78600 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Volvo Volvo EC750D
    4.5 rating
    ₹3.5 - 4.0 crore
    72700 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Volvo Volvo EC950E
    4.5 rating
    ₹4.5 - 5.0 crore
    89960 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Tata Hitachi Tata Hitachi Zaxis 870-5G
    4.5 rating
    Price Available Soon
    82300 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Tata Hitachi Tata Hitachi ZAXIS 670H
    4.5 rating
    Price Available Soon
    63500 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    Kobelco Kobelco SK850LC
    4.5 rating
    ₹3.80 - 4.20 crore
    80500 Kg
    VS
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    L&T Komatsu Komatsu PC800-8R
    4.5 rating
    Price Available Soon
    74200 Kg

    Popular Comparisons with CAT 395

    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Tata Hitachi ZAXIS 890LCH
    Tata Hitachi Tata Hitachi ZAXIS 890LCH
    4.5 rating
    Price Available Soon
    84300 kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    BEML BEML BE1000-1
    4.5 rating
    Price Available Soon
    95000 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Liebherr Liebherr R 998 SME Litronic
    4.5 rating
    Price Available Soon
    97700 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Liebherr Liebherr R 992 Litronic
    4.5 rating
    Price Available Soon
    85800 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Liebherr Liebherr R 978 SME Litronic
    4.5 rating
    Price Available Soon
    78350 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    SANY SANY SY870C-10HD
    4.5 rating
    Price Available Soon
    78600 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    SANY SANY SY980C-10HD
    4.5 rating
    Price Available Soon
    95800 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Volvo Volvo EC950E
    4.5 rating
    ₹4.5 - 5.0 crore
    89960 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Tata Hitachi Tata Hitachi Zaxis 870-5G
    4.5 rating
    Price Available Soon
    82300 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Tata Hitachi Tata Hitachi EX 1200V
    4.5 rating
    Price Available Soon
    109000 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    L&T Komatsu Komatsu PC1250-8R
    4.5 rating
    Price Available Soon
    106500 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    L&T Komatsu Komatsu PC850-8R1
    4.5 rating
    Price Available Soon
    79000 Kg
    VS
    Caterpillar CAT 395
    4.5 rating
    Price Available Soon
    94100 Kg
    Kobelco Kobelco SK850LC
    4.5 rating
    ₹3.80 - 4.20 crore
    80500 Kg

    Frequently Asked Question

    Ans.

    The Komatsu PC850-8R1 usually uses less diesel. Its engine is smaller than the Cat 395 engine. On a big machine that runs many hours, this saves a lot of money over a year. The Cat 395 burns more fuel, but it also moves more material. So look at fuel used for each tonne moved, not just fuel per hour. For steady mixed work, the Komatsu is easier on your fuel bill.

    Ans.

    Both Cat and Komatsu have strong dealer networks in India. What matters most is which one is close to your site. Ask the local dealer where the nearest service centre is and how fast a mechanic can reach you. On these big machines, one day of downtime costs a lot. Pick the brand whose dealer can reach your work site fast and keep parts in stock nearby.

    Ans.

    Both machines hold their value well because they are known brands. The Cat 395 has a wider buyer base in mining, so it can be easier to sell to a large contractor. The Komatsu PC850-8R1 also sells well, mainly to buyers who want lower fuel use. Keep the service records and hour meter clean. A machine with a full service history always sells faster and at a better price.

    Ans.

    Match the machine to your main job. Pick the Cat 395 for hard rock, heavy quarry loading and high-output mining, because it is heavier and has a bigger bucket. Pick the Komatsu PC850-8R1 for deep trenching, work on slopes and softer ground, because it digs deeper and is a bit lighter. Not sure? Read our excavator applications guide or see the full excavator range.

    Ans.

    Yes, it is very useful for a fleet or an EPC company. On your phone or computer you can see where each machine is, how many hours it has run, and when it needs service. This helps you plan service before a breakdown and stop fuel theft on remote sites. If you run only one machine and stay on site, you will use it less, but it still helps with service reminders.

    Ans.

    Yes. Banks, finance companies and the brand dealers all give loans and lease plans for large excavators. How much you pay each month depends on your down payment and your past loan record. Many contractors take a lease so the machine pays from the project income. Ask two or three lenders and compare before you decide.

    Komatsu PC850-8R1 Vs CAT 395 - Compare Price & Availability Across 600+ Locations in India

    Compare Komatsu PC850-8R1 Vs CAT 395 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare