Schwing Stetter SLM 2600 vs Bull VMP 4000: the two differ on 38 of 42 listed specs. The main differences are Engine (KOEL 74.5 HP vs KOEL 110 HP), Bucket Capacity (415 L vs 610 L), Fuel Tank (NA vs 90 L), Drum Capacity (2.4 m³ vs 4.0 m³). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Schwing Stetter SLM 2600 vs Bull VMP 4000: the two differ on 38 of 42 listed specs. The main differences are Engine (KOEL 74.5 HP vs KOEL 110 HP), Bucket Capacity (415 L vs 610 L), Fuel Tank (NA vs 90 L), Drum Capacity (2.4 m³ vs 4.0 m³). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Schwing Stetter SLM 2600
₹ 35 - 37 Lakhs
Bull VMP 4000
₹ 40 – 42 Lakhs
Particulars
Schwing Stetter SLM 2600
Bull VMP 4000
Bull VMP 4000 vs Schwing Stetter SLM 2600: Which Self-Loading Mixer Fits Your Site?
The Bull VMP 4000 and the Schwing Stetter SLM 2600 both mix and pour concrete on site, but they suit different jobs. The Bull carries a bigger 4.0 cubic metre drum and a stronger 110 HP engine, with multi-mode steering that helps it turn in tight spots. The Schwing Stetter has a smaller 2.4 cubic metre drum but gives precise control with a wide 216-degree slew and accurate weighing sensors.
A contractor pouring large volumes on open sites may prefer the Bull for its bigger drum and stronger engine. A builder who needs careful, accurate concrete output on a tighter site may lean toward the Schwing Stetter for its precise control and weighing. Browse the wider Schwing Stetter mixer range, the self-loading mixer range, or read the concrete mixer types guide to match a machine to your pour.
Schwing Stetter SLM 2600 Self-Loading Mixer
Pros:
Precise control with 216° slew increases productivity
Engine comes in two power configurations: 74.5 HP and 74.8 HP
4-speed automotive type transmission
Features hydrostatic steering and 4-wheel drive
Dual brake circuit with power-assisted hydraulic brake
Gradeability of 24³
Dual pressure sensors for accurate weighing
Cons:
Lower engine power compared to Bull VMP 4000
Relatively smaller drum capacity of 2.4 m³
Drum rotation speed limited to 21 rpm
Unspecified fuel and hydraulic tank capacities
Lesser ground clearance (details not provided)
Smaller bucket capacity of 415 L
Bull VMP 4000 Self-Loading Mixer
Pros:
Higher engine power at 110 HP
Larger drum capacity of 4.0 m³ increases concrete volume per load
Joystick-controlled fully electronic weighing system
Multi-mode steering including 2-wheel, coordinate, and crab steering for better maneuverability
Hydrostatic transmission with 4-wheel drive for efficient power transmission
Higher gradeability of 25°
Better ground clearance at 385 mm
Cons:
Relatively heavier unladen weight of 7700 kg
Drum slewing degree not specified, which may impact certain handling aspects
Higher fuel consumption potential due to stronger engine
Larger overall dimensions could pose challenges in constrained spaces
Pros:
Cons:
Closing Recommendation
Both mixers load and pour concrete on site, so the right pick depends on the size of your pours and how tight your site is. Pick the Bull VMP 4000 if you want a bigger drum and a stronger engine for large, open sites. Pick the Schwing Stetter SLM 2600 if you want precise slew control and accurate weighing on a tighter site. So match the machine to your work: VMP 4000 for bigger loads, SLM 2600 for precise, controlled pours.
Schwing Stetter SLM 2600 Vs Bull VMP 4000 Self Loading Price, Technical Specifications & Features
Designed for versatility, the Schwing Stetter SLM 2600 provides precise control with sensors and a 216° slew. This feature improves site productivity.
Built for versatility, the Bull VMP 4000 delivers hydrostatic drive, multi-mode steering, HD tyres, and joystick-controlled weight measurement for rugged site performance.
Bull VMP 4000 vs Schwing Stetter SLM 2600: Which Self-Loading Mixer Fits Your Site?
The Bull VMP 4000 and the Schwing Stetter SLM 2600 both mix and pour concrete on site, but they suit different jobs. The Bull carries a bigger 4.0 cubic metre drum and a stronger 110 HP engine, with multi-mode steering that helps it turn in tight spots. The Schwing Stetter has a smaller 2.4 cubic metre drum but gives precise control with a wide 216-degree slew and accurate weighing sensors.
A contractor pouring large volumes on open sites may prefer the Bull for its bigger drum and stronger engine. A builder who needs careful, accurate concrete output on a tighter site may lean toward the Schwing Stetter for its precise control and weighing. Browse the wider Schwing Stetter mixer range, the self-loading mixer range, or read the concrete mixer types guide to match a machine to your pour.
Schwing Stetter SLM 2600 Self-Loading Mixer
Pros:
Precise control with 216° slew increases productivity
Engine comes in two power configurations: 74.5 HP and 74.8 HP
4-speed automotive type transmission
Features hydrostatic steering and 4-wheel drive
Dual brake circuit with power-assisted hydraulic brake
Gradeability of 24³
Dual pressure sensors for accurate weighing
Cons:
Lower engine power compared to Bull VMP 4000
Relatively smaller drum capacity of 2.4 m³
Drum rotation speed limited to 21 rpm
Unspecified fuel and hydraulic tank capacities
Lesser ground clearance (details not provided)
Smaller bucket capacity of 415 L
Bull VMP 4000 Self-Loading Mixer
Pros:
Higher engine power at 110 HP
Larger drum capacity of 4.0 m³ increases concrete volume per load
Joystick-controlled fully electronic weighing system
Multi-mode steering including 2-wheel, coordinate, and crab steering for better maneuverability
Hydrostatic transmission with 4-wheel drive for efficient power transmission
Higher gradeability of 25°
Better ground clearance at 385 mm
Cons:
Relatively heavier unladen weight of 7700 kg
Drum slewing degree not specified, which may impact certain handling aspects
Higher fuel consumption potential due to stronger engine
Larger overall dimensions could pose challenges in constrained spaces
Pros:
Cons:
Closing Recommendation
Both mixers load and pour concrete on site, so the right pick depends on the size of your pours and how tight your site is. Pick the Bull VMP 4000 if you want a bigger drum and a stronger engine for large, open sites. Pick the Schwing Stetter SLM 2600 if you want precise slew control and accurate weighing on a tighter site. So match the machine to your work: VMP 4000 for bigger loads, SLM 2600 for precise, controlled pours.
Schwing Stetter SLM 2600 Vs Bull VMP 4000 Self Loading Price, Technical Specifications & Features
Designed for versatility, the Schwing Stetter SLM 2600 provides precise control with sensors and a 216° slew. This feature improves site productivity.
Built for versatility, the Bull VMP 4000 delivers hydrostatic drive, multi-mode steering, HD tyres, and joystick-controlled weight measurement for rugged site performance.
Questions buyers ask about the Schwing Stetter SLM 2600 vs Bull VMP 4000
Ans.
The Bull VMP 4000 has a bigger 4.0 cubic metre drum and a stronger 110 HP engine. The Schwing Stetter SLM 2600 has a smaller 2.4 cubic metre drum but gives more precise control with a 216-degree slew. Both are self-loading concrete mixers built to mix and pour on site.
Ans.
The Bull VMP 4000 has the bigger drum, at 4.0 cubic metres. The Schwing Stetter SLM 2600 carries a smaller 2.4 cubic metre drum. A bigger drum means more concrete mixed per load, which can save time on large pours.
Ans.
Yes, the Bull VMP 4000 has better ground clearance, at 385 mm. This helps it move over rough or uneven site ground without getting stuck. The Schwing Stetter SLM 2600 does not list its ground clearance figure.
Ans.
The Bull VMP 4000 is easier to turn in a tight site. It has multi-mode steering, including crab steering, which helps it move sideways in small spaces. The Schwing Stetter SLM 2600 uses hydrostatic steering with a wide 216-degree slew for close, controlled work near the pour point.
Ans.
Yes, the Schwing Stetter SLM 2600 uses dual pressure sensors for accurate weighing. This helps a contractor keep the concrete mix consistent, batch after batch. The Bull VMP 4000 uses a joystick-controlled electronic weighing system for the same job.
Schwing Stetter SLM 2600 Vs Bull VMP 4000 - Compare Price & Availability Across 600+ Locations in India
Compare Schwing Stetter SLM 2600 Vs Bull VMP 4000 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
