Ten kilometres of the Gompakonda Main Canal at Balimela in Odisha go for concrete lining and rebuilding at ₹69.35 crore, and the Gompakonda canal lining tender closes at 5:30 PM on 10 November 2026.
Ten kilometres of canal, four kinds of work
The contract runs from RD 40.309 km to RD 50.626 km of the Gompakonda Main Canal, about 10.3 km, and bundles four activities: cement concrete lining, renovation of structures, resectioning, and strengthening of the canal embankment. The inviting office is Potteru Canal Division III at Bhubanapali under the Chief Construction Engineer, Potteru Irrigation Project, Balimela, reference CCE-PIP-BML-12/2026-27.
Canal rehabilitation is calendar driven rather than value driven. The canal has to be dry to work in it, so the real programme is set by the closure period the irrigation department allows, and the portal does not state a period of work. Ask about the closure window at the pre bid stage, because it governs everything you price.
Percentage rate bidding, and an EMD you may not have to pay
The form of contract is percentage, so you bid above or below the department schedule rather than quoting item rates. The estimate is ₹69,35,32,111 and the EMD is ₹69,35,400, almost exactly 1 per cent. Notably, EMD exemption is allowed on this tender, which is unusual and opens it to contractors holding a valid exemption. The tender fee is ₹10,000 and bids open at 11:30 AM on 11 November 2026.
Everything happens in a confined trapezoidal section with soft, saturated ground on both banks. Long reach excavators do the resectioning from the berm without tracking into the bed, and backhoe loaders handle structures, cross drainage and the access ramps you will cut every few hundred metres.
Lining concrete is low volume but continuous, which suits a small mixer moved along the bank rather than a central plant, and embankment strengthening needs a compactor narrow enough for the bank top. Malkangiri district is remote, so carry spares. A machine waiting on a part during the canal closure is lost work you cannot make up.
Key facts
Tender ID
2026_CCEBA_143981_1
Reference no.
CCE-PIP-BML-12/2026-27
Issuing authority
Chief Construction Engineer, Potteru Irrigation Project, Balimela, through Potteru Canal Division III, Bhubanapali
Location
RD 40.309 km to RD 50.626 km of the Gompakonda Main Canal, Balimela, Odisha
Search by tender ID 2026_CCEBA_143981_1 (reference no. CCE-PIP-BML-12/2026-27) under CCE Potteru Irrigation Project, Balimela.
Register on the portal and keep a valid Class III digital signature certificate ready.
Download the bid document, confirm the canal closure window and the percentage schedule, then check eligibility, the ₹69,35,400 EMD and the ₹10,000 fee.
Submit your bid online before 10 November 2026, 5:30 PM.
What does the Gompakonda canal lining tender include?
Cement concrete lining, renovation of structures, resectioning and strengthening of the canal embankment from RD 40.309 km to RD 50.626 km of the Gompakonda Main Canal, about 10.3 km.
What is the value and the EMD?
₹69.35 crore, shown as ₹69,35,32,111. The EMD is ₹69,35,400 and EMD exemption is allowed on this tender.
How is the bid priced?
On a percentage basis, above or below the department schedule, rather than as individual item rates.
When does it close, and how long is the work?
Bids close at 5:30 PM on 10 November 2026 and open at 11:30 AM on 11 November 2026. The portal does not state a period of work.
Tender details are summarised for convenience and may change. Always verify the latest dates, terms and documents on the official tendering portal before bidding. DesiMachines is not responsible for changes made by the issuing authority.
Bidding with your own machines?Tenders often ask for machine papers such as the RC, insurance and invoice. Keep them in one private place on My Machine and get a reminder before insurance or service falls due. Free.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.