Five drilling rig manufacturers in India say on their own sites that they build rigs here: Dhiraj Rigs in Gujarat, KLR Universal in Hyderabad, PRD Rigs and Revathi Equipment India in Tamil Nadu, and Sandvik, which built a rotary blast hole drill at Pune. Epiroc and Furukawa name Indian companies of their own. Between them they cover borewell rigs, DTH and top-hammer rigs for quarry benches, rotary blast hole drills for mines, and core rigs for exploration and soil investigation.
The rig backs into a farm at first light with the compressor truck behind it. By noon the hammer is a few hundred feet down in granite and the farmer is watching the flush water for a sign of yield. If a hammer seal goes at that depth, the job stops until a part arrives, and the owner’s real question about any maker is how far away that part is. This piece lists who makes and supports drilling rigs in India and which rig family suits which job. For how each rig works, read the drill rig guide.
How this list of drilling rig manufacturers in India was built
We opened each maker’s own website on 18 November 2026. A maker is listed only if its own site names an Indian plant, company, office or dealer, and each model figure is quoted as the maker states it. Two sites would not load from our checks that day: PRD Rigs returned a server error, and Sandvik’s site blocked us. For those two we read the maker’s own pages as archived between December 2025 and October 2026, and say so below.
Piling rigs are left out, because they have their own list of piling rig manufacturers in India. Oil and gas rigs are left out too. The list is alphabetical, not a ranking, and not exhaustive: some smaller borewell rig builders appear only on trade portals, with no site of their own to check.
The makers at a glance
| Maker | Indian presence (own site) | Rig families listed | Example model, as stated |
|---|---|---|---|
| Dhiraj Rigs | Works at GIDC Kalol, Gujarat | Truck, tractor and trolley borewell rigs; DTH-cum-rotary; core | DEW 1000: 6.5 inch holes to 300 m |
| Epiroc | Epiroc Mining India: Pune head office, product company at Nashik | SmartROC, FlexiROC, PowerROC and AirROC surface rigs; exploration rigs | PowerROC D55: DTH, 90-152 mm, 30 m |
| Furukawa | Furukawa Rock Drill India, Bengaluru (set up 2011) | HCR hydraulic crawler drills; DCR DTH drills | HCR1200-DSIII: 76-115 mm |
| KLR Universal | Rigs built in-house at Cherlapally, Hyderabad | Water well, quarry, construction and core rigs; DTH tools | DTHR-300: 4.5-17.5 inch, 200-400 m |
| PRD Rigs | Address at SIPCOT SEZ, Perundurai; branches in Andhra Pradesh and Telangana | Truck, crawler and tractor water well rigs; exploration, mining, geotechnical | PRD 500T: 114-152 mm, DTH or rotary |
| Revathi Equipment India | Plant at Malumachampatti, Coimbatore | Rotary and DTH blast hole drills, jackless drills, water well, exploration | T650W: 152-311 mm, 300 m |
| Sandvik | Pune facility built its 160D drill (2013 release) | Leopard DTH, top-hammer and rotary blast hole rigs | Leopard DI450: 90-130 mm |
Hole sizes and depths are each maker’s stated range for that model as read on 18 November 2026, or on the archive date given below. What you drill on your site depends on the rock, the hammer and the compressor fitted.
What each maker says it builds and supports
Dhiraj Rigs
Dhiraj Rigs works from GIDC Kalol in Gandhinagar district, Gujarat, and its director dates the business to 1997. It lists truck, tractor and trolley borewell rigs, a direct rotary rig and a tractor-mounted DEW TR 450 that it calls a core drilling rig. The spec table for the truck-mounted DEW 1000 gives 6.5 inch holes to 300 m and 10 inch holes to 150 m with 4.5 inch rods, and names the compressor it expects: 900 cfm at 200 psi or 1,100 cfm at 300 psi. The same page’s introduction quotes 370 m, so confirm depth with the maker. Its site names export markets in Africa; we found no Indian service branches listed.
Epiroc
Epiroc Mining India Private Limited has its head office in Pune, an innovation and technology centre in Bengaluru, a site in Hyderabad and a unit its contact page calls Epiroc Product Company Nashik. Its Indian site lists more than 30 surface drill rigs across the four families: top-hammer models such as the FlexiROC T35 (64-115 mm, 28 m) and DTH models such as the PowerROC D55 (90-152 mm, 30 m). The site does not say which rigs are made in India. Parts are sold through an online shop, which helps an owner far from Pune.
Furukawa
Furukawa Rock Drill of Japan says it built Japan’s first hydraulic crawler drill in 1977. Its HCR series of top-hammer crawler drills runs from the HCR910-DS (64-89 mm) to the HCR L110 (102-140 mm), and the DCR series are DTH drills for larger holes. The company history records Furukawa Rock Drill India Pvt. Ltd. set up in 2011, and the office list gives its address in Bengaluru. Neither page says whether the Indian company sells and services the drills or only the breakers, so ask before you buy.
KLR Universal
KLR began in Hyderabad in 1984 as a maker of drill tools, started full-scale rig manufacturing in 1996 and built its first core drilling rig in 2004. It says every rig is built in-house at its Cherlapally facility, with its own heat treatment division making rods and hammer parts. Water well rigs run from the TBW-40 (100-150 m) to the DTHR-750 (650-800 m), and core rigs from the TMC 40 (50 m, NQ/HQ) to the CDR 750. Its dealer network is described as Africa and the Middle East, so Indian buyers deal with Hyderabad directly.
PRD Rigs
PRD Rigs dates itself to 1972 and claims more than 4,000 units sold in 75 countries. Its contact page gives an address in the SIPCOT SEZ for engineering products at Perundurai, Tamil Nadu, with branches at Chimakurthy in Andhra Pradesh and Khammam in Telangana. It lists truck, crawler and tractor-mounted water well rigs from the PRD 500T (114-152 mm) to the Novastar 500 (203-610 mm), plus exploration, mining and geotechnical rigs, and says it resolves support issues within 24 hours. These details come from its pages as archived between May and October 2026.
Revathi Equipment India
Revathi began in 1977 as the Indian unit of Chicago Pneumatic and spent almost fifteen years under Atlas Copco before the Renaissance group bought it in 2002. Its plant at Malumachampatti, Coimbatore, has an installed capacity of 100 drill machines a year, and it says it has supplied more than 2,000 drills, with Coal India, Tata Steel, NMDC and Vedanta named as customers. Its mining drills cover blast holes from 102 to 349 mm. Its water well range includes the T650W (152-311 mm, 300 m) and T700WH (to 500 m), and it supports Foremost and GEFCO rigs in India. It offers maintenance contracts and spares through a dealer network.
Sandvik
Sandvik’s news archive carries a May 2013 release saying it rolled out its first 160D rotary blast hole drill, for 160 mm holes, from its Pune facility, after buying Eimco Elecon’s surface drilling business in 2011. Its current range includes the Leopard DTH rigs; the DI450 drills 90-130 mm holes with a 3 or 4 inch hammer and weighs 23,000 kg, by a December 2025 copy of its page. We could not confirm from its site that Pune still builds surface rigs, so ask the company directly.
Which rig family suits which job?
The types of drilling rigs guide explains how each one works. For a buyer, the job decides the shortlist.
- Borewells for farms and houses: a truck or tractor-mounted DTH-cum-rotary rig with a separate compressor. This is where the Indian builders above list most of their models. Work out the feet you must drill each month before you choose depth; our piece on borewell business profit walks through that sum.
- Quarry benches and construction blasting: a crawler top-hammer rig for holes up to about 115 mm, or a DTH crawler for larger and deeper holes. Epiroc, Furukawa and Sandvik list both kinds, and KLR and PRD list quarry rigs too.
- Large open-cast mines: a rotary blast hole drill for holes from about 150 mm up. Revathi lists rotary drills up to 349 mm, and Sandvik built its 160 mm 160D at Pune.
- Mineral exploration and soil investigation: a core rig, from KLR, Revathi, Dhiraj or PRD.
What to ask before you buy a drilling rig
Ask where the nearest service engineer sits and how long a hammer, rotary head or compressor part takes to reach your district. Ask whether the rig’s compressor is on board or a separate truck, and price both. Ask what the maker’s own spec table says for the hole size and depth you will sell, and do not rely on the introduction text if the two differ.
A borewell rig also brings paperwork. The Supreme Court’s order of 6 August 2010 in the borewell accidents case says registration of all drilling agencies, government and private, should be mandatory with the district administration or statutory authority wherever applicable. Build that into your start-up plan, along with the loan: compare equipment finance offers once you have a quote with the compressor and tooling priced in.
When to buy from an Indian builder and when from a global maker
Buy from an Indian builder when the work is borewells or shallow exploration, the rig must be repaired by a local mechanic, and parts need to come by road within a day or two. Dhiraj, KLR, PRD and Revathi publish their factory addresses, and KLR and Revathi state in-house tooling or after-sales contracts.
Go to a global maker when you drill quarry benches all day and hole accuracy, fuel use and operator comfort decide your cost per tonne blasted. Then the deciding check is the Indian company behind the badge: Epiroc names four Indian sites, while Furukawa’s Indian office should confirm in writing that it supports drill rigs. A quarry buys more than the drill, so price the excavators that load the blasted rock and the wider quarry equipment fleet, and see who builds the next stage in our list of stone crusher manufacturers in India.
Maker details and model figures are taken from each company’s own website on 18 November 2026, or from archived copies of its pages where dated above, and can change. The list is alphabetical, not a ranking, and not exhaustive. Specifications, service networks and rules change. Confirm current terms with the OEM or authorised dealer, and registration rules with the official source in your district, before deciding. DesiMachines is not liable for decisions taken on the basis of information that may have changed after publication.



