ACE F250 vs Escorts HYDRA 15 Top-Jack: the two differ on 47 of 53 listed specs. The main differences are Engine (Tata 101 HP vs Escorts Kubota 50 HP), Operating Weight (20800 Kg vs 12050 kg), Weight (20800 kg vs 12050 kg), Fuel Tank (NA vs 38 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE F250
Escorts HYDRA 15 Top-Jack
ACE F250
VS
Escorts HYDRA 15 Top-Jack
Crane
ACE F250 vs Escorts HYDRA 15 Top-Jack: the two differ on 47 of 53 listed specs. The main differences are Engine (Tata 101 HP vs Escorts Kubota 50 HP), Operating Weight (20800 Kg vs 12050 kg), Weight (20800 kg vs 12050 kg), Fuel Tank (NA vs 38 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE F250
₹ 50 - 54 Lakh
Escorts HYDRA 15 Top-Jack
₹21.4 Lakh Onwards*
Particulars
ACE F250
Escorts HYDRA 15 Top-Jack
ACE F250 vs Escorts HYDRA 15 Top-Jack: Which One to Buy?
These two cranes are built for different scales of lifting work. The ACE F250 lifts up to 25 tonnes, runs on 4-wheel drive for better grip on rough ground, and pulls harder on the hoist line, which suits heavy-duty industrial jobs. The Escorts HYDRA 15 Top-Jack turns in a much tighter radius, has wider articulation for busy spaces, and is lighter, which makes it easier to move and place on softer ground.
If your work regularly needs to lift heavier loads and cross rough or soft terrain, the F250's higher capacity and 4-wheel drive are built for that. If your jobs are lighter-duty and your site is tight, with limited room to turn, the HYDRA 15 Top-Jack's smaller turning radius and articulation make it easier to work with. Browse the full ACE crane range, all mobile cranes, or read our crane buying guide.
ACE F250
Pros:
Higher maximum lifting capacity of 25 Tonnes which is ideal for heavy-duty tasks
4 wheel drive capabilities provide better traction and stability on difficult terrains
Turbo Charged Engine with Electronic Control Unit offers efficient performance
Robust transmission system with 10 forward and 2 reverse speeds
Higher maximum speed without load of 37 km/h, making it quicker on the move
Higher hoist line pull capability of 3.9 Tonnes
Cons:
Potentially higher fuel consumption due to a more powerful engine
Higher operating weight may require a stronger base or more preparation for operation
Escorts HYDRA 15 Top-Jack
Pros:
More affordable and efficient for tasks requiring up to 15 Tonnes lifting capacity
Smaller minimum turning radius of 7000 mm provides better maneuverability in tight spaces
Wider articulation up to 48° increases versatility in movement
Lower operating weight could make it easier to transport and use on softer grounds
Pneumatically actuated disc brakes in the rear may offer better stopping power
Cons:
Less power with a 50 HP engine as compared to the ACE F250 engine
2 wheel drive system may not perform as well as 4WD in challenging environments
Smaller fuel tank capacity of 38 L could mean more frequent refueling stops
Lower maximum boom height of 17.2 m may restrict operation in some conditions
Pros:
Cons:
Closing Recommendation
These two cranes are built for different job sizes, so match your pick to how heavy your loads are and how tight your site is. Choose the ACE F250 when your work needs higher lifting capacity, 4-wheel drive and stronger hoist pull for rough ground. Choose the Escorts HYDRA 15 Top-Jack when your site is compact and you need a crane that turns easily in tight spaces. So match the machine to your work: ACE F250 for heavy-duty, rough-ground lifting, Escorts HYDRA 15 Top-Jack for compact yards and workshops.
ACE F250 Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
The ACE F250 is a 25-ton farana pick and carry crane designed for heavy industrial maintenance, power projects, and large infrastructure works across India. It features a VECV diesel engine producing 101 HP, ensuring consistent hydraulic performance during long operating cycles. The crane can handle 25 tonnes at rated radius, with a boom extending to 19.3 metres. All-wheel steering and a low centre of gravity enable safe load transport on crowded or sloped surfaces. Efficient hydraulic power management helps lower fuel consumption per tonne-kilometre of payload movement. The ACE F250 crane price in India generally falls between ₹50 lakh and ₹54 lakh, depending on specifications and usage location. This crane from ACE Construction Equipment is well-suited for large EPC firms, plant operators, and professional crane hire companies.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
ACE F250 vs Escorts HYDRA 15 Top-Jack: Which One to Buy?
These two cranes are built for different scales of lifting work. The ACE F250 lifts up to 25 tonnes, runs on 4-wheel drive for better grip on rough ground, and pulls harder on the hoist line, which suits heavy-duty industrial jobs. The Escorts HYDRA 15 Top-Jack turns in a much tighter radius, has wider articulation for busy spaces, and is lighter, which makes it easier to move and place on softer ground.
If your work regularly needs to lift heavier loads and cross rough or soft terrain, the F250's higher capacity and 4-wheel drive are built for that. If your jobs are lighter-duty and your site is tight, with limited room to turn, the HYDRA 15 Top-Jack's smaller turning radius and articulation make it easier to work with. Browse the full ACE crane range, all mobile cranes, or read our crane buying guide.
ACE F250
Pros:
Higher maximum lifting capacity of 25 Tonnes which is ideal for heavy-duty tasks
4 wheel drive capabilities provide better traction and stability on difficult terrains
Turbo Charged Engine with Electronic Control Unit offers efficient performance
Robust transmission system with 10 forward and 2 reverse speeds
Higher maximum speed without load of 37 km/h, making it quicker on the move
Higher hoist line pull capability of 3.9 Tonnes
Cons:
Potentially higher fuel consumption due to a more powerful engine
Higher operating weight may require a stronger base or more preparation for operation
Escorts HYDRA 15 Top-Jack
Pros:
More affordable and efficient for tasks requiring up to 15 Tonnes lifting capacity
Smaller minimum turning radius of 7000 mm provides better maneuverability in tight spaces
Wider articulation up to 48° increases versatility in movement
Lower operating weight could make it easier to transport and use on softer grounds
Pneumatically actuated disc brakes in the rear may offer better stopping power
Cons:
Less power with a 50 HP engine as compared to the ACE F250 engine
2 wheel drive system may not perform as well as 4WD in challenging environments
Smaller fuel tank capacity of 38 L could mean more frequent refueling stops
Lower maximum boom height of 17.2 m may restrict operation in some conditions
Pros:
Cons:
Closing Recommendation
These two cranes are built for different job sizes, so match your pick to how heavy your loads are and how tight your site is. Choose the ACE F250 when your work needs higher lifting capacity, 4-wheel drive and stronger hoist pull for rough ground. Choose the Escorts HYDRA 15 Top-Jack when your site is compact and you need a crane that turns easily in tight spaces. So match the machine to your work: ACE F250 for heavy-duty, rough-ground lifting, Escorts HYDRA 15 Top-Jack for compact yards and workshops.
ACE F250 Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
The ACE F250 is a 25-ton farana pick and carry crane designed for heavy industrial maintenance, power projects, and large infrastructure works across India. It features a VECV diesel engine producing 101 HP, ensuring consistent hydraulic performance during long operating cycles. The crane can handle 25 tonnes at rated radius, with a boom extending to 19.3 metres. All-wheel steering and a low centre of gravity enable safe load transport on crowded or sloped surfaces. Efficient hydraulic power management helps lower fuel consumption per tonne-kilometre of payload movement. The ACE F250 crane price in India generally falls between ₹50 lakh and ₹54 lakh, depending on specifications and usage location. This crane from ACE Construction Equipment is well-suited for large EPC firms, plant operators, and professional crane hire companies.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
47 differ · 6 identical
Key highlights: ACE F250 vs Escorts HYDRA 15 Top-Jack Crane
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Make
Tata 497 (CEV Stage V)
Escorts Kubota E4.391NA
Articulation
40°
Up to 48°
Max. Speed
38 km/h
29 km/h
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Overall Length
NA
11900 mm
Overall Width
2600 mm
2550 mm
Wheelbase
4930 mm
4880 mm
Boom Luffing Range
NA
-5° to + 55°
Warranty
1 Year
1 Year
Key highlights: ACE F250 vs Escorts HYDRA 15 Top-Jack Crane
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Make
Tata 497 (CEV Stage V)
Escorts Kubota E4.391NA
Articulation
40°
Up to 48°
Max. Speed
38 km/h
29 km/h
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Overall Length
NA
11900 mm
Overall Width
2600 mm
2550 mm
Wheelbase
4930 mm
4880 mm
Boom Luffing Range
NA
-5° to + 55°
Warranty
1 Year
1 Year
Full specifications: ACE F250 vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Make
Tata 497 (CEV Stage V)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V, Negative earth, 110Ah
12V; Negative earth; 88Ah
Alternator
NA
NA
Lifting Capacity
ACE F250
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
25 Tonnes
15 Tonnes
Transmission & Clutch
ACE F250
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty, synchromesh transmission with 12 forward and 2 reverse speeds. Auxiliary Gear Box with & 2WD/4WD Selector
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering System
ACE F250
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
8200 mm
7000 mm
Hoist Mechanism
ACE F250
Escorts HYDRA 15 Top-Jack
Hoist
6 Falls, 4 Tonnes Line Pull Winch driven by Hydraulic motor, Rope dia 13 mm fitted with self-adjusting hook block and rope tensioner
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
35 Mtrs./Min (Line Speed)
NA
Brakes
ACE F250
Escorts HYDRA 15 Top-Jack
Front Wheels
Fully pneumatic brakes on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE F250
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
2600 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4930 mm
4880 mm
Operating Weight
20800 Kg
12050 kg
Front Track
1880 mm
1980 mm
Rear Track
1880 mm
1680 mm
Front Tyres
12.00 x 24- 18 PR (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
12.00 x 24- 18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE F250
Escorts HYDRA 15 Top-Jack
Telescoping
Four-part slotted boom with 2 hydraulically operated & synchronized and 4th part powered extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Through one double-acting extension cylinder
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
NA
-5° to + 55°
Boom Height
19.3 m
17.2 m
Full specifications: ACE F250 vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Make
Tata 497 (CEV Stage V)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V, Negative earth, 110Ah
12V; Negative earth; 88Ah
Alternator
NA
NA
Lifting Capacity
ACE F250
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
25 Tonnes
15 Tonnes
Transmission Clutch
ACE F250
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty, synchromesh transmission with 12 forward and 2 reverse speeds. Auxiliary Gear Box with & 2WD/4WD Selector
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering
ACE F250
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
8200 mm
7000 mm
Hoist Mechanism
ACE F250
Escorts HYDRA 15 Top-Jack
Hoist
6 Falls, 4 Tonnes Line Pull Winch driven by Hydraulic motor, Rope dia 13 mm fitted with self-adjusting hook block and rope tensioner
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
35 Mtrs./Min (Line Speed)
NA
Brakes
ACE F250
Escorts HYDRA 15 Top-Jack
Front Wheels
Fully pneumatic brakes on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE F250
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE F250
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
2600 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4930 mm
4880 mm
Operating Weight
20800 Kg
12050 kg
Front Track
1880 mm
1980 mm
Rear Track
1880 mm
1680 mm
Front Tyres
12.00 x 24- 18 PR (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
12.00 x 24- 18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE F250
Escorts HYDRA 15 Top-Jack
Telescoping
Four-part slotted boom with 2 hydraulically operated & synchronized and 4th part powered extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Questions buyers ask about the ACE F250 vs Escorts HYDRA 15 Top-Jack
Ans.
The ACE F250 lifts more, up to 25 tonnes against the Escorts HYDRA 15 Top-Jack's 15 tonnes, so it suits heavier industrial lifting jobs.
Ans.
The Escorts HYDRA 15 Top-Jack turns in a tighter space, with a minimum turning radius of 7,000 mm, which helps a lot in busy yards with less room to manoeuvre.
Ans.
Yes, the ACE F250 runs on 4-wheel drive, which gives it better traction and stability on rough or uneven ground than a 2-wheel-drive crane.
Ans.
The ACE F250 reaches higher with its taller boom, which suits taller lifts on bigger industrial sites. The Escorts HYDRA 15 Top-Jack's maximum boom height is 17.2 metres.
Ans.
The ACE F250 pulls harder on the hoist line, rated at 3.9 tonnes, which helps when the load needs extra force to lift cleanly off the ground.
Ans.
The Escorts HYDRA 15 Top-Jack suits a compact yard or workshop best. Its tighter turning radius and wider articulation make it easier to position for repeated, accurate lifts.
ACE F250 Vs Escorts HYDRA 15 Top-Jack - Compare Price & Availability Across 600+ Locations in India
Compare ACE F250 Vs Escorts HYDRA 15 Top-Jack price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
