ACE NX 360 15T VS Escorts HYDRA 1565 Crane

₹ 34 - 38 Lakh^*

ACE NX 360 15T

Lift Capacity

15 Tonnes
Boom Height

18.2 m
Engine

Tata 76 HP
Weight

18300 kg
Turning Radius

7400 mm
Drive Type

2 Wheel drive

Pick & Carry Crane

₹ 21 - 24 Lakh^*

Escorts HYDRA 1565

Lift Capacity

15 Tonnes
Boom Height

21.5 m
Engine

Escorts Kubota 50 HP
Weight

13295 kg
Turning Radius

7000 mm
Drive Type

2 Wheel drive

Pick & Carry Crane

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

ACE NX 360 15T VS Escorts HYDRA 1565 Crane

ACE NX 360 15T

₹ 34 - 38 Lakh

Escorts HYDRA 1565

₹ 21 - 24 Lakh

Particulars	ACE NX 360 15T	Escorts HYDRA 1565

ACE NX 360 15T vs Escorts HYDRA 1565: Which 15-Tonne Crane to Buy?

Both the ACE NX 360 15T and the Escorts HYDRA 1565 lift 15 tonnes, but they work differently on site. The ACE NX 360 15T can turn the load a full 360 degrees without moving the crane itself, which helps a lot on tight sites where you cannot reposition easily. It also runs at a higher top speed, so it moves between jobs faster. The Escorts HYDRA 1565 uses a smaller, more fuel-efficient engine and has a slow "creep" speed for careful, exact placement of loads, which matters when you are setting heavy parts close to walls or pipes.

For a fleet owner running many sites, the ACE NX 360 15T's extra speed and full swing can mean more jobs done in a day. For a contractor who values low running cost and careful, precise lifts, the Escorts HYDRA 1565 fits better. Compare the full ACE crane range and the Escorts crane range, browse all cranes, or read our crane buying guide.

ACE NX 360 15T

Pros:

360° rotation capability allows versatile lifting and placement.
Equipped with a powerful Tata 76 HP engine that provides robust operation.
Higher maximum speed of 40 km/h enables quicker movement on site.
Heavier operating weight of 18300 kg which may imply better stability during heavy lifting tasks.
Larger hoist speed of 50 meters per minute for efficient lifting operations.
Comes with a four-section boom with two sections hydraulically operated for superior reach and versatility.

Cons:

Despite having a robust engine, its max power of 76 HP is higher than needed for some operations which can affect fuel efficiency.
Lacks information on fuel and other essential tanks' capacities.
Provides no data on creep speed, which is crucial for precise movements in tight spaces.

Escorts HYDRA 1565

Pros:

Hydra 1565 features a maximum boom height of 21.5 m, offering exceptional operational reach.
Powered by an efficient 50 hp Escorts Kubota diesel engine with good fuel efficiency.
Includes a creep speed of 1.7 km/h for precise, slow movements.
Articulation up to 48° provides enhanced maneuverability.
Lower operating weight of 13295 kg may enable easier transportation and less ground pressure when moving on site.
Larger wheel base of 4880 mm could contribute to increased stability during loads.

Cons:

Maximum speed without load is limited to 29 km/h, which is slower compared to its counterpart.
Engine power of 50 HP might be less compared to the competition, which could impact lifting performance under certain conditions.
Fuel tank capacity of 38 L might require more frequent refilling depending on the operational demands.

Closing Recommendation

Both cranes lift 15 tonnes, so the real choice comes down to how you work. The ACE NX 360 15T gives you a more powerful engine, higher speed, and full 360-degree swing, which suits busy sites with many quick lifts. The Escorts HYDRA 1565 gives you lower fuel use, a taller boom, and slow, careful speed control for precise placement work. So match the machine to your work: ACE NX 360 15T for fast, high-power lifting across a busy site, Escorts HYDRA 1565 for fuel-efficient, precise placement at height.