ACE NX 360 20T vs Escorts HYDRA 13: the two differ on 47 of 53 listed specs. The main differences are Engine (VECV 101 HP vs Simpson 48 HP), Operating Weight (20400 kg vs 11000 kg), Weight (20400 kgs vs 11000 kg), Fuel Tank (NA vs 45 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE NX 360 20T
Escorts HYDRA 13
ACE NX 360 20T
VS
Escorts HYDRA 13
Crane
ACE NX 360 20T vs Escorts HYDRA 13: the two differ on 47 of 53 listed specs. The main differences are Engine (VECV 101 HP vs Simpson 48 HP), Operating Weight (20400 kg vs 11000 kg), Weight (20400 kgs vs 11000 kg), Fuel Tank (NA vs 45 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE NX 360 20T
₹ 40 - 42 Lakh
Escorts HYDRA 13
₹ 18 - 20 Lakh
Particulars
ACE NX 360 20T
Escorts HYDRA 13
ACE NX 360 20T vs Escorts HYDRA 13: Which Crane to Buy?
Both are pick-and-carry cranes for site lifting, so the choice comes down to raw power and reach against tight-space handling. The ACE NX 360 20T lifts up to 20 tonnes, runs a strong 101 HP engine, drives on all four wheels for better grip, and turns fully 360 degrees for work in restricted zones. The Escorts HYDRA 13 lifts up to 13 tonnes, weighs far less at 11,000 kg, turns in a tighter 6,750 mm radius, and articulates up to 50 degrees for close, careful moves.
For a fleet owner or EPC site with rough ground and heavy lifts, the ACE NX 360 20T's four-wheel drive and higher capacity carry more work. For a driver on a compact site needing to weave the crane around obstacles, the Escorts HYDRA 13's lighter weight and sharp articulation make positioning easier. See the full crane range, the ACE crane lineup, the Escorts crane lineup, or our crane buying guide.
ACE NX 360 20T
Pros:
Higher lifting capacity of 20 Tonnes
More powerful engine with 101 HP
4 Wheel Drive capability for better terrain handling
Full-slew movement ideal for restricted zones
Higher maximum speed of 38 km/h without load
Large boom height of 19.2 m
Cons:
Heavier operating weight of 20400 kg
Escorts HYDRA 13
Pros:
Lower operating weight of 11000 kg for easier maneuverability
Smaller minimum turning radius of 6750 mm
Higher articulation of up to 50°
Fuel tank capacity provided: 45 L
Hydraulic tank capacity provided: 65 L
Detailed track dimensions given
Cons:
Less lifting capacity at 13 Tonnes
Lower engine power at 48 HP
2 Wheel drive compared to 4WD in the ACE
Lower maximum speed without load at 29 km/h
Smaller boom height at 12.8 m
Pros:
Cons:
Closing Recommendation
Both cranes are built for pick-and-carry lifting, so the right pick depends on your ground conditions and how tight your site is. The ACE NX 360 20T lifts more weight, drives on all four wheels, and turns a full 360 degrees, which suits fleet owners and EPC sites with rough ground and heavy loads. The Escorts HYDRA 13 is much lighter, turns in a smaller radius, and articulates sharply for close, careful moves, which suits compact sites with obstacles nearby. So match the machine to your work: ACE NX 360 20T for rough ground and heavy lifts, Escorts HYDRA 13 for tight, compact sites.
ACE NX 360 20T Vs Escorts HYDRA 13 Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
Designed for mid-range lifting needs, the Escorts Hydra 13 is a 13-ton pick and carry crane suitable for construction, pipeline, and industrial projects across India. It operates on a Simpson diesel engine rated at 48 HP, providing consistent power under heavy loads. The Hydra 13 from Escorts Kubota Construction Equipment can lift upto 13 tonnes and extends to a boom length of 12.8 metres. Precision-controlled hydraulics allow for smooth load handling and better safety. Low fuel consumption per lift cycle helps reduce operating costs on long projects. The Escorts Hydra 13 crane price in India usually falls between ₹18 lakh and ₹20 lakh, depending on variant and location. This Escorts crane is popular among EPC contractors, infrastructure developers, and fleet rental businesses.
ACE NX 360 20T vs Escorts HYDRA 13: Which Crane to Buy?
Both are pick-and-carry cranes for site lifting, so the choice comes down to raw power and reach against tight-space handling. The ACE NX 360 20T lifts up to 20 tonnes, runs a strong 101 HP engine, drives on all four wheels for better grip, and turns fully 360 degrees for work in restricted zones. The Escorts HYDRA 13 lifts up to 13 tonnes, weighs far less at 11,000 kg, turns in a tighter 6,750 mm radius, and articulates up to 50 degrees for close, careful moves.
For a fleet owner or EPC site with rough ground and heavy lifts, the ACE NX 360 20T's four-wheel drive and higher capacity carry more work. For a driver on a compact site needing to weave the crane around obstacles, the Escorts HYDRA 13's lighter weight and sharp articulation make positioning easier. See the full crane range, the ACE crane lineup, the Escorts crane lineup, or our crane buying guide.
ACE NX 360 20T
Pros:
Higher lifting capacity of 20 Tonnes
More powerful engine with 101 HP
4 Wheel Drive capability for better terrain handling
Full-slew movement ideal for restricted zones
Higher maximum speed of 38 km/h without load
Large boom height of 19.2 m
Cons:
Heavier operating weight of 20400 kg
Escorts HYDRA 13
Pros:
Lower operating weight of 11000 kg for easier maneuverability
Smaller minimum turning radius of 6750 mm
Higher articulation of up to 50°
Fuel tank capacity provided: 45 L
Hydraulic tank capacity provided: 65 L
Detailed track dimensions given
Cons:
Less lifting capacity at 13 Tonnes
Lower engine power at 48 HP
2 Wheel drive compared to 4WD in the ACE
Lower maximum speed without load at 29 km/h
Smaller boom height at 12.8 m
Pros:
Cons:
Closing Recommendation
Both cranes are built for pick-and-carry lifting, so the right pick depends on your ground conditions and how tight your site is. The ACE NX 360 20T lifts more weight, drives on all four wheels, and turns a full 360 degrees, which suits fleet owners and EPC sites with rough ground and heavy loads. The Escorts HYDRA 13 is much lighter, turns in a smaller radius, and articulates sharply for close, careful moves, which suits compact sites with obstacles nearby. So match the machine to your work: ACE NX 360 20T for rough ground and heavy lifts, Escorts HYDRA 13 for tight, compact sites.
ACE NX 360 20T Vs Escorts HYDRA 13 Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
Designed for mid-range lifting needs, the Escorts Hydra 13 is a 13-ton pick and carry crane suitable for construction, pipeline, and industrial projects across India. It operates on a Simpson diesel engine rated at 48 HP, providing consistent power under heavy loads. The Hydra 13 from Escorts Kubota Construction Equipment can lift upto 13 tonnes and extends to a boom length of 12.8 metres. Precision-controlled hydraulics allow for smooth load handling and better safety. Low fuel consumption per lift cycle helps reduce operating costs on long projects. The Escorts Hydra 13 crane price in India usually falls between ₹18 lakh and ₹20 lakh, depending on variant and location. This Escorts crane is popular among EPC contractors, infrastructure developers, and fleet rental businesses.
Full specifications: ACE NX 360 20T vs Escorts HYDRA 13 Crane
Engine
ACE NX 360 20T
Escorts HYDRA 13
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
Simpson S 433(I)-CEV BS
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 cylinders; water cooled diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
48 HP (35.8 kW) @ 2200 RPM
Battery
12V; Negative earth
12V single battery; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts HYDRA 13
Max. Lifting Capacity
20 Tonnes
13 Tonnes
Transmission & Clutch
ACE NX 360 20T
Escorts HYDRA 13
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering System
ACE NX 360 20T
Escorts HYDRA 13
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering; hydraulically controlled through 2 double-acting jacks
Articulation
40°
Up to 50°
Turning Radius
7600 mm
6750 mm
Hoist Mechanism
ACE NX 360 20T
Escorts HYDRA 13
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; Hydraulic winch; Rope dia 13 mm
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts HYDRA 13
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatic assisted hydraulic brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Disk brakes actuated through a slave cylinder.
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE NX 360 20T
Escorts HYDRA 13
Engine Oil
NA
NA
Fuel Tank
NA
45 L
Hydraulic Tank
NA
65 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE NX 360 20T
Escorts HYDRA 13
Overall Length With Bucket
NA
10970 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
11000 kg
Front Track
NA
1930 mm
Rear Track
NA
1680 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
10.00 x 20-16 PR (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 20T
Escorts HYDRA 13
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
3 parts hydraulically powered & fully synchronized
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-2° to +64°
NA
Boom Height
19.2 m
12.8 m
Full specifications: ACE NX 360 20T vs Escorts HYDRA 13 Crane
Engine
ACE NX 360 20T
Escorts HYDRA 13
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
Simpson S 433(I)-CEV BS
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 cylinders; water cooled diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
48 HP (35.8 kW) @ 2200 RPM
Battery
12V; Negative earth
12V single battery; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts HYDRA 13
Max. Lifting Capacity
20 Tonnes
13 Tonnes
Transmission Clutch
ACE NX 360 20T
Escorts HYDRA 13
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering
ACE NX 360 20T
Escorts HYDRA 13
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering; hydraulically controlled through 2 double-acting jacks
Articulation
40°
Up to 50°
Turning Radius
7600 mm
6750 mm
Hoist Mechanism
ACE NX 360 20T
Escorts HYDRA 13
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; Hydraulic winch; Rope dia 13 mm
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts HYDRA 13
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatic assisted hydraulic brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Disk brakes actuated through a slave cylinder.
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE NX 360 20T
Escorts HYDRA 13
Engine Oil
NA
NA
Fuel Tank
NA
45 L
Hydraulic Tank
NA
65 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE NX 360 20T
Escorts HYDRA 13
Overall Length With Bucket
NA
10970 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
11000 kg
Front Track
NA
1930 mm
Rear Track
NA
1680 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
10.00 x 20-16 PR (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 20T
Escorts HYDRA 13
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
3 parts hydraulically powered & fully synchronized
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Questions buyers ask about the ACE NX 360 20T vs Escorts HYDRA 13
Ans.
The ACE NX 360 20T lifts more, with a maximum capacity of 20 tonnes against the HYDRA 13's 13 tonnes. It also runs a stronger 101 HP engine against the HYDRA 13's 48 HP.
Ans.
Yes. The ACE NX 360 20T has four-wheel drive, which gives it better grip on rough or muddy ground. The Escorts HYDRA 13 uses two-wheel drive, which suits firmer, more even sites.
Ans.
The Escorts HYDRA 13 is easier to move on a tight site. It is much lighter at 11,000 kg, turns in a smaller 6,750 mm radius, and can articulate up to 50 degrees for careful positioning.
Ans.
The Escorts HYDRA 13 gives more detailed specifications, publishing its fuel tank capacity at 45 litres, hydraulic tank capacity at 65 litres, and full track dimensions. This helps a buyer plan servicing and running costs ahead of time.
Ans.
The ACE NX 360 20T suits restricted zones well because it turns fully 360 degrees on the spot. The Escorts HYDRA 13 also works well in tight areas, thanks to its light weight and sharp articulation.
ACE NX 360 20T Vs Escorts HYDRA 13 - Compare Price & Availability Across 600+ Locations in India
Compare ACE NX 360 20T Vs Escorts HYDRA 13 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
