ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack: the two differ on 47 of 53 listed specs. The main differences are Engine (VECV 101 HP vs Escorts Kubota 50 HP), Operating Weight (20400 kg vs 12050 kg), Weight (20400 kgs vs 12050 kg), Fuel Tank (NA vs 38 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
ACE NX 360 20T
VS
Escorts HYDRA 15 Top-Jack
Crane
ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack: the two differ on 47 of 53 listed specs. The main differences are Engine (VECV 101 HP vs Escorts Kubota 50 HP), Operating Weight (20400 kg vs 12050 kg), Weight (20400 kgs vs 12050 kg), Fuel Tank (NA vs 38 L). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE NX 360 20T
₹ 40 - 42 Lakh
Escorts HYDRA 15 Top-Jack
₹21.4 Lakh Onwards*
Particulars
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack: Which Crane to Buy?
Both are pick-and-carry cranes used to lift and move loads short distances on a site. The ACE NX 360 20T, from ACE, lifts a higher load, has 4 wheel drive for better grip on rough ground, and its boom reaches higher. The Escorts HYDRA 15 Top-Jack, from Escorts, is built for tight lift-and-carry work and turns more sharply in narrow spaces.
Do not choose by the highest lift number alone. Look at the loads you lift most often, not the rare heavy one. If your site has narrow lanes or tight yards, the HYDRA 15's tighter turning matters more day to day than a few extra tonnes of capacity you may rarely use. If you often lift heavier loads and need more reach, the NX 360 20T's extra capacity earns its cost. See the full crane range or read our crane buying guide before deciding.
ACE NX 360 20T
Pros:
Higher lifting capacity of 20 Tonnes
Features a Volvo Eicher Engine offering 101 HP for powerful performance
4 Wheel Drive for better mobility in various conditions
Higher max boom height of 19.2 m
Greater articulation at 40° allowing for flexible movements
Cons:
Higher operating weight of 20400 kg which may affect transportability
No fuel tank capacity provided which is vital information for operation planning
Lacks a provided creep speed specification
Escorts HYDRA 15 Top-Jack
Pros:
Strong torque output suitable for tough lift-and-carry tasks with a 15-ton lifting capacity
2 Wheel Drive system developed specially for crane application
Equipped with cerametallic clutch for extended service life
Detailed specifications provided for tanks and tracks
Higher articulation of up to 48° for tight working conditions
Cons:
Lower maximum lifting capacity of 15 Tonnes compared to ACE NX 360 20T
Smaller engine size with 50 HP which could be a limitation for some heavy-duty tasks
Overall dimensions suggest it might be less compact than other models
Pros:
Cons:
Closing Recommendation
Both these cranes work well as pick-and-carry machines, so pick by the loads and the space you work in most. Choose the ACE NX 360 20T if you regularly lift heavier loads, need more boom reach, and often work on rough or uneven ground. Choose the Escorts HYDRA 15 Top-Jack if your work is mostly lighter lift-and-carry jobs in tight yards or narrow lanes where sharp turning matters. So match the machine to your work: ACE NX 360 20T for heavier loads and rough ground, Escorts HYDRA 15 Top-Jack for tight spaces and frequent, lighter lifts.
ACE NX 360 20T Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack: Which Crane to Buy?
Both are pick-and-carry cranes used to lift and move loads short distances on a site. The ACE NX 360 20T, from ACE, lifts a higher load, has 4 wheel drive for better grip on rough ground, and its boom reaches higher. The Escorts HYDRA 15 Top-Jack, from Escorts, is built for tight lift-and-carry work and turns more sharply in narrow spaces.
Do not choose by the highest lift number alone. Look at the loads you lift most often, not the rare heavy one. If your site has narrow lanes or tight yards, the HYDRA 15's tighter turning matters more day to day than a few extra tonnes of capacity you may rarely use. If you often lift heavier loads and need more reach, the NX 360 20T's extra capacity earns its cost. See the full crane range or read our crane buying guide before deciding.
ACE NX 360 20T
Pros:
Higher lifting capacity of 20 Tonnes
Features a Volvo Eicher Engine offering 101 HP for powerful performance
4 Wheel Drive for better mobility in various conditions
Higher max boom height of 19.2 m
Greater articulation at 40° allowing for flexible movements
Cons:
Higher operating weight of 20400 kg which may affect transportability
No fuel tank capacity provided which is vital information for operation planning
Lacks a provided creep speed specification
Escorts HYDRA 15 Top-Jack
Pros:
Strong torque output suitable for tough lift-and-carry tasks with a 15-ton lifting capacity
2 Wheel Drive system developed specially for crane application
Equipped with cerametallic clutch for extended service life
Detailed specifications provided for tanks and tracks
Higher articulation of up to 48° for tight working conditions
Cons:
Lower maximum lifting capacity of 15 Tonnes compared to ACE NX 360 20T
Smaller engine size with 50 HP which could be a limitation for some heavy-duty tasks
Overall dimensions suggest it might be less compact than other models
Pros:
Cons:
Closing Recommendation
Both these cranes work well as pick-and-carry machines, so pick by the loads and the space you work in most. Choose the ACE NX 360 20T if you regularly lift heavier loads, need more boom reach, and often work on rough or uneven ground. Choose the Escorts HYDRA 15 Top-Jack if your work is mostly lighter lift-and-carry jobs in tight yards or narrow lanes where sharp turning matters. So match the machine to your work: ACE NX 360 20T for heavier loads and rough ground, Escorts HYDRA 15 Top-Jack for tight spaces and frequent, lighter lifts.
ACE NX 360 20T Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
Full specifications: ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth
12V; Negative earth; 88Ah
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
20 Tonnes
15 Tonnes
Transmission & Clutch
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering System
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
7600 mm
7000 mm
Hoist Mechanism
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Front Wheels
Fully pneumatic brakes on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
12050 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-2° to +64°
-5° to + 55°
Boom Height
19.2 m
17.2 m
Full specifications: ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
101 HP (74 kW) @ 2200 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth
12V; Negative earth; 88Ah
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
20 Tonnes
15 Tonnes
Transmission Clutch
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
7600 mm
7000 mm
Hoist Mechanism
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Front Wheels
Fully pneumatic brakes on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
12050 kg
Front Track
NA
1980 mm
Rear Track
NA
1680 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 20T
Escorts HYDRA 15 Top-Jack
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Questions buyers ask about the ACE NX 360 20T vs Escorts HYDRA 15 Top-Jack
Ans.
Not always. Buy based on the loads you lift most often, not the heaviest one you might lift once in a while. The ACE NX 360 20T lifts more, but if your daily loads suit 15 tonnes, the Escorts HYDRA 15 Top-Jack does the job without the extra cost of unused capacity.
Ans.
The Escorts HYDRA 15 Top-Jack turns better in tight spaces. It has higher articulation, which means it can bend and turn more sharply, useful in narrow factory yards or crowded sites where a bigger crane struggles to manoeuvre.
Ans.
Yes, on rough or muddy ground it matters a lot. The ACE NX 360 20T's 4 wheel drive gives it better grip and traction, so it handles uneven or soft ground more safely. On flat, paved yards, the difference matters less.
Ans.
It depends on your area's typical job size. Sites that regularly need to move heavier machine parts or steel prefer a higher-capacity crane like the ACE NX 360 20T. Yards and factories doing frequent, lighter lift-and-carry work prefer a crane like the HYDRA 15 that manoeuvres easily.
Ans.
Yes, both ACE and Escorts have dealer networks across India, so parts and service are generally available. Still, check which brand has a service point closer to where you actually work, since a nearby dealer saves time when the crane needs attention.
ACE NX 360 20T Vs Escorts HYDRA 15 Top-Jack - Compare Price & Availability Across 600+ Locations in India
Compare ACE NX 360 20T Vs Escorts HYDRA 15 Top-Jack price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
