Aquarius 1003 E vs Aquarius 704 D: the two differ on 14 of 27 listed specs. The main differences are Engine (60 HP vs 46 HP), Max. Output (33m³/hr vs 35 m³/hr), SPM (18 vs 26), Max. Pressure (57 bar vs 80 bar). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Aquarius 1003 E
Aquarius 704 D
Aquarius 1003 E
VS
Aquarius 704 D
Concrete Pump
Aquarius 1003 E vs Aquarius 704 D: the two differ on 14 of 27 listed specs. The main differences are Engine (60 HP vs 46 HP), Max. Output (33m³/hr vs 35 m³/hr), SPM (18 vs 26), Max. Pressure (57 bar vs 80 bar). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
Aquarius 1003 E
Price on Request
Aquarius 704 D
Price on Request
Particulars
Aquarius 1003 E
Aquarius 704 D
Aquarius 1003 E vs Aquarius 704 D: Which One to Buy?
Both these are Aquarius concrete pumps, but they are built for different kinds of sites. The Aquarius 1003 E runs on electric power with no exhaust, which suits city sites where diesel smoke and noise are restricted. The Aquarius 704 D runs on diesel, sits on a single-axle chassis that tows easily between sites, and fits into tighter residential plots.
If you work inside city limits with emission or noise rules, the 1003 E lets you pour without smoke or extra fuel storage on site. If you move between smaller residential and light infrastructure jobs, the 704 D tows behind a vehicle and fits a compact plot with ease. Both use a mechanical override so a small fault does not stop the pour. See the full Aquarius pump range, browse all concrete pumps, or read our concrete pump buying guide.
Aquarius 1003 E
Pros:
Electric operation eliminates fuel storage and emissions
High concrete pressure of 57 bar suitable for indoor pours
Full remote control allows operation from any location on site
Mechanical override ensures continuity during electrical trips
Lower stroke count reduces wear and operating costs
Cons:
Higher initial price range compared to some alternatives
Slightly limited output capacity of 33 m³/hr
Aquarius 704 D
Pros:
Higher maximum theoretical output of 35 m³/hr
Compact footprint ideal for confined residential sites
Single-axle chassis for easy towing between sites
Max concrete pressure of 80 bar for light infrastructure work
Fewer strokes per cycle contribute to lower wear
Cons:
Diesel operation may require fuel storage
Lower power of 46 HP compared to some competitors
Pros:
Cons:
Closing Recommendation
Think about where your site sits and what rules it must follow before you choose between these two Aquarius pumps. Choose the Aquarius 1003 E for city sites with emission or noise limits, where electric power with no exhaust matters most. Choose the Aquarius 704 D for residential and light infrastructure jobs, where a compact, easy-to-tow diesel pump gets the work done. So match the machine to your work: Aquarius 1003 E for emission-restricted city sites, Aquarius 704 D for residential and light infrastructure jobs.
Aquarius 1003 E Vs Aquarius 704 D Concrete Pump Price, Technical Specifications & Features
The Aquarius 1003 E is a 33 m³/hr electric stationary concrete pump built for urban construction, indoor slab casting, and emission-restricted project sites. A 60 HP electric motor runs off standard three-phase site power with no exhaust and no fuel storage on site. This electric stationary concrete pump holds up to 57 bar of concrete pressure on indoor pours without generating noise complaints from surrounding buildings. Full remote control keeps the operator in command of every pour from anywhere on site. When site electrics trip, mechanical override keeps the machine running without stopping the pour. The 1003 E uses four outriggers and a rigid frame that keep the machine firm on busy urban and enclosed sites. A lower stroke count reduces wear and cuts running costs across every project. Chosen by construction companies and civil contractors for urban and enclosed concrete projects across India. The right electric pump for construction companies who need 33 m³/hr on urban and enclosed sites where diesel is not an option.
The Aquarius 704 D is a 35 m³/hr stationary concrete pump built for residential construction, slab casting, and light infrastructure pours. The compact footprint fits on plots where crawler access is restricted, and the single-axle chassis tows easily between residential sites. At 46 HP, this concrete pump holds up to 80 bar of concrete pressure, and when site electrics trip, mechanical override keeps the machine running without breaking the cycle. The 704 D uses four outriggers and a rigid frame that hold the machine firm on the most confined and uneven residential sites, with fewer strokes per cycle for less wear and lower daily operating costs from day one. Trusted by owner-operators and small fleet owners on residential and light civil construction projects across India. The right residential workhorse for owner-operators who need mechanical override reliability and four-outrigger stability on confined sites.
Aquarius 1003 E vs Aquarius 704 D: Which One to Buy?
Both these are Aquarius concrete pumps, but they are built for different kinds of sites. The Aquarius 1003 E runs on electric power with no exhaust, which suits city sites where diesel smoke and noise are restricted. The Aquarius 704 D runs on diesel, sits on a single-axle chassis that tows easily between sites, and fits into tighter residential plots.
If you work inside city limits with emission or noise rules, the 1003 E lets you pour without smoke or extra fuel storage on site. If you move between smaller residential and light infrastructure jobs, the 704 D tows behind a vehicle and fits a compact plot with ease. Both use a mechanical override so a small fault does not stop the pour. See the full Aquarius pump range, browse all concrete pumps, or read our concrete pump buying guide.
Aquarius 1003 E
Pros:
Electric operation eliminates fuel storage and emissions
High concrete pressure of 57 bar suitable for indoor pours
Full remote control allows operation from any location on site
Mechanical override ensures continuity during electrical trips
Lower stroke count reduces wear and operating costs
Cons:
Higher initial price range compared to some alternatives
Slightly limited output capacity of 33 m³/hr
Aquarius 704 D
Pros:
Higher maximum theoretical output of 35 m³/hr
Compact footprint ideal for confined residential sites
Single-axle chassis for easy towing between sites
Max concrete pressure of 80 bar for light infrastructure work
Fewer strokes per cycle contribute to lower wear
Cons:
Diesel operation may require fuel storage
Lower power of 46 HP compared to some competitors
Pros:
Cons:
Closing Recommendation
Think about where your site sits and what rules it must follow before you choose between these two Aquarius pumps. Choose the Aquarius 1003 E for city sites with emission or noise limits, where electric power with no exhaust matters most. Choose the Aquarius 704 D for residential and light infrastructure jobs, where a compact, easy-to-tow diesel pump gets the work done. So match the machine to your work: Aquarius 1003 E for emission-restricted city sites, Aquarius 704 D for residential and light infrastructure jobs.
Aquarius 1003 E Vs Aquarius 704 D Concrete Pump Price, Technical Specifications & Features
The Aquarius 1003 E is a 33 m³/hr electric stationary concrete pump built for urban construction, indoor slab casting, and emission-restricted project sites. A 60 HP electric motor runs off standard three-phase site power with no exhaust and no fuel storage on site. This electric stationary concrete pump holds up to 57 bar of concrete pressure on indoor pours without generating noise complaints from surrounding buildings. Full remote control keeps the operator in command of every pour from anywhere on site. When site electrics trip, mechanical override keeps the machine running without stopping the pour. The 1003 E uses four outriggers and a rigid frame that keep the machine firm on busy urban and enclosed sites. A lower stroke count reduces wear and cuts running costs across every project. Chosen by construction companies and civil contractors for urban and enclosed concrete projects across India. The right electric pump for construction companies who need 33 m³/hr on urban and enclosed sites where diesel is not an option.
The Aquarius 704 D is a 35 m³/hr stationary concrete pump built for residential construction, slab casting, and light infrastructure pours. The compact footprint fits on plots where crawler access is restricted, and the single-axle chassis tows easily between residential sites. At 46 HP, this concrete pump holds up to 80 bar of concrete pressure, and when site electrics trip, mechanical override keeps the machine running without breaking the cycle. The 704 D uses four outriggers and a rigid frame that hold the machine firm on the most confined and uneven residential sites, with fewer strokes per cycle for less wear and lower daily operating costs from day one. Trusted by owner-operators and small fleet owners on residential and light civil construction projects across India. The right residential workhorse for owner-operators who need mechanical override reliability and four-outrigger stability on confined sites.
14 differ · 13 identical
Key highlights: Aquarius 1003 E vs Aquarius 704 D Concrete Pump
Aquarius 1003 E
Aquarius 704 D
Engine Type
Electric Power
Disel Engine
Delivery Cylinder Stroke
1000 mm
700 mm
Weight
NA
NA
Warranty
1 Year
1 Year
Overall Length
5180 mm
5010 mm
Key highlights: Aquarius 1003 E vs Aquarius 704 D Concrete Pump
Aquarius 1003 E
Aquarius 704 D
Engine Type
Electric Power
Disel Engine
Delivery Cylinder Stroke
1000 mm
700 mm
Weight
Not Available
Not Available
Warranty
1 Year
1 Year
Overall Length
5180 mm
5010 mm
Full specifications: Aquarius 1003 E vs Aquarius 704 D Concrete Pump
Engine
Aquarius 1003 E
Aquarius 704 D
Max Engine Power
60 HP (45 kW)
46 HP (34.6 kW)
Engine Type
Electric Power
Disel Engine
Performance
Aquarius 1003 E
Aquarius 704 D
Max Theoretical Output
33m³/hr
35 m³/hr
No. of Strokes Per Minute
18
26
Max Concrete Pressure
57 bar
80 bar
Pumping System
Aquarius 1003 E
Aquarius 704 D
Delivery Cylinder Stroke
1000 mm
700 mm
Delivery Cylinder Diameter
200 mm
200 mm
Weight And Dimension
Aquarius 1003 E
Aquarius 704 D
Machine Weight
NA
NA
Overall Length
5180 mm
5010 mm
Overall Width
1740 mm
1740 mm
Overall Height
2120 mm
2120 mm
Hydraulic System
Aquarius 1003 E
Aquarius 704 D
Hydraulic System Pressure
NA
NA
Hopper Capacity
500 L
500 L
Full specifications: Aquarius 1003 E vs Aquarius 704 D Concrete Pump
Questions buyers ask about the Aquarius 1003 E vs Aquarius 704 D
Ans.
Choose the Aquarius 1003 E when your site is inside a city or has rules against diesel smoke and noise. It runs on electric power, so there is no exhaust and no diesel to store on site.
Ans.
Yes, the Aquarius 704 D sits on a single-axle chassis, so it tows behind a vehicle and moves between sites without extra transport arrangements.
Ans.
The Aquarius 704 D suits a small residential site better. Its compact footprint fits tighter plots, and its single-axle chassis makes it easy to bring in and take out.
Ans.
Yes, the Aquarius 1003 E works well indoors. Its concrete pressure suits indoor pours, and since it makes no exhaust, it is safer to run in a closed space.
Ans.
The Aquarius 1003 E has a mechanical override, so the crew can keep it running through a small electrical fault. This stops the pour from stalling halfway.
Aquarius 1003 E Vs Aquarius 704 D - Compare Price & Availability Across 600+ Locations in India
Compare Aquarius 1003 E Vs Aquarius 704 D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
