Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    CASE 770 NXe Series VS CAT 424 Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights CASE 770 NXe SeriesCAT 424
    CASE 770 NXe Series VS CAT 424 Backhoe Loader
    CASE 770 49 HP Price
    CASE 770 NXe Series

    ₹ 22-24 lakh

    CAT 424 Backhoe Loader
    CAT 424

    ₹ 34-35 Lakhs

    Particulars CASE 770 NXe Series CAT 424

    CASE 770 NXe Series vs Caterpillar 424: Which Backhoe Loader Is Right for You?

    The CASE 770 NXe Series and the Caterpillar 424 are both backhoe loaders built for digging, loading and site work. The CASE 770 NXe runs a smaller, fuel-friendly engine and works well for a small contractor who wants low running cost on everyday jobs. The Caterpillar 424 carries a bigger, stronger engine, so it suits a fleet owner or EPC company that needs more power for tough, all-day digging.

    Think beyond the engine numbers before you pick. Caterpillar is one of the biggest names in the world, so parts and service are usually easy to find, and the machine tends to hold its value well when sold later. CASE also has a wide dealer base in India and costs less to run day to day. Check which brand has a service point close to your work site, then compare loan terms with your dealer. See the full range of backhoe loaders, the CASE backhoe range, the Caterpillar backhoe range, or read our backhoe loader buying guide.

    CASE 770 NXe Series Backhoe Loader

    Pros:

    • Superior fuel efficiency as highlighted by the brand
    • Enhanced operator comfort for increased productivity
    • Advanced hydraulics for better performance
    • Standard GPS included
    • High bucket digging force of 5000 kgf and arm digging force of 2751 kgf
    • Maximum speed of 32.4 km/hr

    Cons:

    • Lower engine horsepower (49.5 HP) compared to the Caterpillar 424
    • Maximum digging depth is less at 4400 mm
    • Engine type is BS-III, which is older than the BS-V of Caterpillar 424

    Caterpillar 424 Backhoe Loader

    Pros:

    • Powerful performance with 74 HP engine
    • High productivity ensured by brand reputation
    • Greater maximum speed of 37.5 km/hr
    • Oil-immersed brakes provide reliable and fade-resistant braking
    • Higher ground clearance
    • Advanced steering type with hydrostatic power steering

    Cons:

    • Unknown excavator maximum lift capacity
    • Information about loader lift over height not available
    • Less efficient engine in terms of displacement to power ratio compared to CASE 770 NXe Series

    Pros:

    Cons:

    Closing Recommendation

    Both backhoe loaders do solid digging and loading work. Choose the Caterpillar 424 when your work needs more power and speed for heavy, all-day tasks. Choose the CASE 770 NXe Series when fuel saving and smooth hydraulics matter more for your daily jobs. So match the machine to your work: Caterpillar 424 for heavy, powerful jobs, CASE 770 NXe Series for lighter, fuel-saving work.

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Price, Technical Specifications & Features

    Brand CASE Backhoe Loader Caterpillar Backhoe loader
    Type 2WD 2WD/4WD
    Price ₹ 22-24 lakh ₹ 34-35 Lakhs
    Engine FPT 49.5 HP Cat 74 HP
    Bucket 0.26 m³ 0.27 m³
    Shovel 1.1 m³ 1.05 m³
    Max Digging Depth 4400 mm 4138 mm
    Max Dump Height 2720 mm 2794 mm
    Weight 7610 Kg 8760 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The CAT 424 Backhoe Loader is a heavy-duty construction machine designed for excavation, road work, trenching, and infrastructure projects across India. It has a C3.6 diesel engine from CAT that delivers 74 HP and around 424 Nm of torque, ensuring strong breakout power and smooth hydraulic performance during continuous operations. The operating weight is approximately 8,000 to 8,760 kg, which provides excellent stability for lifting and digging tasks. It has a loader bucket capacity of about 1.05 m³ and a maximum digging depth of around 4.1 to 4.7 meters, supporting efficient earthmoving and trenching jobs. With both 2WD and 4WD options, advanced hydraulics, and a sturdy build, it operates reliably in various site conditions. The CAT 424 Backhoe Loader price in India ranges from ₹34 to 36 lakhs. It is a performance-driven backhoe loader for contractors seeking higher torque, stability, and consistent output in the 75 HP segment.

    CASE 770 NXe Series vs Caterpillar 424: Which Backhoe Loader Is Right for You?

    The CASE 770 NXe Series and the Caterpillar 424 are both backhoe loaders built for digging, loading and site work. The CASE 770 NXe runs a smaller, fuel-friendly engine and works well for a small contractor who wants low running cost on everyday jobs. The Caterpillar 424 carries a bigger, stronger engine, so it suits a fleet owner or EPC company that needs more power for tough, all-day digging.

    Think beyond the engine numbers before you pick. Caterpillar is one of the biggest names in the world, so parts and service are usually easy to find, and the machine tends to hold its value well when sold later. CASE also has a wide dealer base in India and costs less to run day to day. Check which brand has a service point close to your work site, then compare loan terms with your dealer. See the full range of backhoe loaders, the CASE backhoe range, the Caterpillar backhoe range, or read our backhoe loader buying guide.

    CASE 770 NXe Series Backhoe Loader

    Pros:

    • Superior fuel efficiency as highlighted by the brand
    • Enhanced operator comfort for increased productivity
    • Advanced hydraulics for better performance
    • Standard GPS included
    • High bucket digging force of 5000 kgf and arm digging force of 2751 kgf
    • Maximum speed of 32.4 km/hr

    Cons:

    • Lower engine horsepower (49.5 HP) compared to the Caterpillar 424
    • Maximum digging depth is less at 4400 mm
    • Engine type is BS-III, which is older than the BS-V of Caterpillar 424

    Caterpillar 424 Backhoe Loader

    Pros:

    • Powerful performance with 74 HP engine
    • High productivity ensured by brand reputation
    • Greater maximum speed of 37.5 km/hr
    • Oil-immersed brakes provide reliable and fade-resistant braking
    • Higher ground clearance
    • Advanced steering type with hydrostatic power steering

    Cons:

    • Unknown excavator maximum lift capacity
    • Information about loader lift over height not available
    • Less efficient engine in terms of displacement to power ratio compared to CASE 770 NXe Series

    Pros:

    Cons:

    Closing Recommendation

    Both backhoe loaders do solid digging and loading work. Choose the Caterpillar 424 when your work needs more power and speed for heavy, all-day tasks. Choose the CASE 770 NXe Series when fuel saving and smooth hydraulics matter more for your daily jobs. So match the machine to your work: Caterpillar 424 for heavy, powerful jobs, CASE 770 NXe Series for lighter, fuel-saving work.

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Price, Technical Specifications & Features

    CASE 770 NXe Series CAT 424
    Brand
    CASE Backhoe Loader Caterpillar Backhoe loader
    Type
    2WD 2WD/4WD
    Price
    ₹ 22-24 lakh ₹ 34-35 Lakhs
    Engine
    FPT 49.5 HP Cat 74 HP
    Bucket
    0.26 m³ 0.27 m³
    Shovel
    1.1 m³ 1.05 m³
    Max Digging Depth
    4400 mm 4138 mm
    Max Dump Height
    2720 mm 2794 mm
    Weight
    7610 Kg 8760 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The CAT 424 Backhoe Loader is a heavy-duty construction machine designed for excavation, road work, trenching, and infrastructure projects across India. It has a C3.6 diesel engine from CAT that delivers 74 HP and around 424 Nm of torque, ensuring strong breakout power and smooth hydraulic performance during continuous operations. The operating weight is approximately 8,000 to 8,760 kg, which provides excellent stability for lifting and digging tasks. It has a loader bucket capacity of about 1.05 m³ and a maximum digging depth of around 4.1 to 4.7 meters, supporting efficient earthmoving and trenching jobs. With both 2WD and 4WD options, advanced hydraulics, and a sturdy build, it operates reliably in various site conditions. The CAT 424 Backhoe Loader price in India ranges from ₹34 to 36 lakhs. It is a performance-driven backhoe loader for contractors seeking higher torque, stability, and consistent output in the 75 HP segment.

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Key Highlights

    CASE 770 NXe Series CAT 424
    Engine Make FPT S8000 Cat C3.6*
    Fuel Tank 129 L 160 L
    Max Torque 252.2 Nm @ 1200 RPM 424 Nm @ 1200 RPM
    Max Speed 32.4 km/hr 37.5 km/hr
    Hydraulic System 100 L 42 L
    Max Working Height 5490 mm 5701 mm
    Excavator Max Lift Capacity 1417 kg NA
    Loader Load Over Height 3640 mm 4015 mm
    Overall Length 5880 mm 5708 mm
    Wheel Base 2180 mm 2200 mm
    Bucket Digging Force 5000 kgf 5736 kgf
    Shovel Breakout Force 5275 kgf 5380 kgf
    Warranty 1 Year 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Key Highlights

    CASE 770 NXe Series CAT 424
    Engine Make
    FPT S8000 Cat C3.6*
    Fuel Tank
    129 L 160 L
    Max Torque
    252.2 Nm @ 1200 RPM 424 Nm @ 1200 RPM
    Max Speed
    32.4 km/hr 37.5 km/hr
    Hydraulic System
    100 L 42 L
    Max Working Height
    5490 mm 5701 mm
    Excavator Max Lift Capacity
    1417 kg NA
    Loader Load Over Height
    3640 mm 4015 mm
    Overall Length
    5880 mm 5708 mm
    Wheel Base
    2180 mm 2200 mm
    Bucket Digging Force
    5000 kgf 5736 kgf
    Shovel Breakout Force
    5275 kgf 5380 kgf
    Warranty
    1 Year 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series CAT 424
    Model FPT 49.5 HP Cat 74 HP
    Type BS-III; Water Cooled. BS-V; Electronic Turbo Intercooled
    Gross Power 49.5 HP (37 kW) 74 HP (55 kW) @ 2200 RPM
    Max Torque 252.2 Nm @ 1200 RPM 424 Nm @ 1200 RPM
    Displacement 3.9 L 3.6 L
    Battery 12V / 110 Ah NA
    Alternator NA NA

    Transmission

    CASE 770 NXe Series CAT 424
    Type CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission Travel speeds of backhoe loader at full throttle; when equipped with industrial tires

    Steering

    CASE 770 NXe Series CAT 424
    Type Power Steering Front Wheel; Hyrostatic Power Steering
    Working Pressure 140 bar NA

    Steering Turning Circle

    CASE 770 NXe Series CAT 424
    Inner Wheels Braked - Outside Loader Bucket 4600 mm NA
    Inner Wheels Braked - Outside Wheels NA NA
    Inner Wheels not Braked - Outside Loader Bucket 5550 mm 12200 mm
    Inner Wheels not Braked - Outside Wheels NA 9300 mm

    Brakes

    CASE 770 NXe Series CAT 424
    Service Hydraulic foot operated; 2 disc per side Hydraulically actuated; oil-immersed multi-disc brakes on the rear axle; providing self-adjusting and fade-resistant braking.
    Parking Mechanically actuated caliper type brake pack on Rear axle input shaft Mechanically actuated; spring-applied; hydraulically released (SAHR) brake mounted on the transmission output shaft for secure parking.

    Tyres

    CASE 770 NXe Series CAT 424
    Front 9 x 16 - 16 PR 9 x 16
    Rear 16.9 x 28 - 12 PR 16.9 x 28

    Speed

    CASE 770 NXe Series CAT 424
    Forward- 1st gear 5 km/hr 5.7 km/hr
    Reverse- 1st gear 5.9 km/hr 5.7 km/hr
    Forward- 2nd gear 7.9 km/hr 9.6 km/hr
    Reverse- 2nd gear 9.4 km/hr 9.6 km/hr
    Forward- 3rd gear 16.9 km/hr 23 km/hr
    Reverse- 3rd gear 19.8 km/hr 23 km/hr
    Forward- 4th gear 32.4 km/hr 37.5 km/hr
    Reverse- 4th gear Not recommended 37.5 km/hr

    Hydraulics

    CASE 770 NXe Series CAT 424
    Type Open Center Load Sensing system; Axial Piston with Electric Displacement Control Closed center; Variable Displacement Pump
    Maximum Pump Flow 119 L/min 132 L/min
    System Pressure 240 bar 245 bar

    Axles

    CASE 770 NXe Series CAT 424
    Rear Axle CARRARO 28.32M Enclosed; planetary reduction axle with a swinging design and differential lock; ensuring better traction and stability on uneven surfaces.
    Front Axle CNH PS1300 (2WD) Fixed; heavy-duty steering axle with 2WD or 4WD options; offering high ground clearance and durability for rough terrains.

    Service Capacities

    CASE 770 NXe Series CAT 424
    Fuel Tank 129 L 160 L
    Engine Coolant 20 L 20 L
    Engine Oil 8.6 L 9 L
    Hydraulic Tank 48 L 42 L
    Hydraulic System 100 L 42 L
    Transmission 18 L 14 L
    Rear Axle 17.1 L NA

    Excavator Performance

    CASE 770 NXe Series CAT 424
    Maximum Digging Depth 4400 mm 4138 mm
    Reach-Ground Level to Rear Wheel Centre 6950 mm 6978 mm
    Reach-Ground Level to Slew Centre 5630 mm 5612 mm
    Reach at Full Height to Slew Centre 2150 mm NA
    Side Reach to Centre Line of Machine NA NA
    Maximum Working Height 5490 mm 5701 mm
    Maximum Load Over Height 3640 mm 4015 mm
    Bucket Rotation Angle 185° 205°
    Bucket Digging force 5000 kgf 5736 kgf
    Arm Digging force 2751 kgf 6562 kgf
    Maximum Lift Capacity 1417 kg NA
    Standard Bucket Capacity 0.26 m³ 0.27 m³
    Standard Bucket Width NA NA

    Loader Performance

    CASE 770 NXe Series CAT 424
    Dump Height 2720 mm 2794 mm
    Load Over Height 3300 mm NA
    Pin Height 3580 mm 3473 mm
    Pin Forward Reach 240 mm NA
    Reach At Ground 1980 mm NA
    Maximum Reach at Full Height 1190 mm 1477 mm
    Max Reach Full Height Dumped 760 mm 808 mm
    Below Ground Level Dig Depth 110 mm 114 mm
    Rollback at Ground 33° 38°
    Dump Angle 45° 45°
    Shovel Breakout Force 5275 kgf 5380 kgf
    Loader Arm Breakout Force 5110 kgf 5401 kgf
    Maximum Payload 1925 kg NA

    Overall Dimensions And Weight

    CASE 770 NXe Series CAT 424
    Machine Weight 7610 kg 8760 kg
    Overall Length 5880 mm 5708 mm
    Wheelbase 2180 mm 2200 mm
    Slew Centre to Rear Axle Centre NA NA
    Minimum Ground Clearance 380 mm 350 mm
    Slew Ground Clearance NA NA
    Height of Cabin 2880 mm 2928 mm
    Overall Height 3850 mm 3732 mm
    Track Width-Rear 1700 mm 1688 mm
    Track Width-Front 1880 mm 1920 mm
    Width Over Bucket 2280 mm 2346 mm

    CASE 770 NXe Series Vs CAT 424 Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series CAT 424
    Model
    FPT 49.5 HP Cat 74 HP
    Type
    BS-III; Water Cooled. BS-V; Electronic Turbo Intercooled
    Gross Power
    49.5 HP (37 kW) 74 HP (55 kW) @ 2200 RPM
    Max Torque
    252.2 Nm @ 1200 RPM 424 Nm @ 1200 RPM
    Displacement
    3.9 L 3.6 L
    Battery
    12V / 110 Ah NA
    Alternator
    NA NA

    Transmission

    CASE 770 NXe Series CAT 424
    Type
    CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission Travel speeds of backhoe loader at full throttle; when equipped with industrial tires

    Steering

    CASE 770 NXe Series CAT 424
    Type
    Power Steering Front Wheel; Hyrostatic Power Steering
    Working Pressure
    140 bar NA

    Steering Turning Circle

    CASE 770 NXe Series CAT 424
    Inner Wheels Braked - Outside Loader Bucket
    4600 mm NA
    Inner Wheels Braked - Outside Wheels
    NA NA
    Inner Wheels not Braked - Outside Loader Bucket
    5550 mm 12200 mm
    Inner Wheels not Braked - Outside Wheels
    NA 9300 mm

    Brakes

    CASE 770 NXe Series CAT 424
    Service
    Hydraulic foot operated; 2 disc per side Hydraulically actuated; oil-immersed multi-disc brakes on the rear axle; providing self-adjusting and fade-resistant braking.
    Parking
    Mechanically actuated caliper type brake pack on Rear axle input shaft Mechanically actuated; spring-applied; hydraulically released (SAHR) brake mounted on the transmission output shaft for secure parking.

    Tyres

    CASE 770 NXe Series CAT 424
    Front
    9 x 16 - 16 PR 9 x 16
    Rear
    16.9 x 28 - 12 PR 16.9 x 28

    Speed

    CASE 770 NXe Series CAT 424
    Forward- 1st gear
    5 km/hr 5.7 km/hr
    Reverse- 1st gear
    5.9 km/hr 5.7 km/hr
    Forward- 2nd gear
    7.9 km/hr 9.6 km/hr
    Reverse- 2nd gear
    9.4 km/hr 9.6 km/hr
    Forward- 3rd gear
    16.9 km/hr 23 km/hr
    Reverse- 3rd gear
    19.8 km/hr 23 km/hr
    Forward- 4th gear
    32.4 km/hr 37.5 km/hr
    Reverse- 4th gear
    Not recommended 37.5 km/hr

    Hydraulics

    CASE 770 NXe Series CAT 424
    Type
    Open Center Load Sensing system; Axial Piston with Electric Displacement Control Closed center; Variable Displacement Pump
    Maximum Pump Flow
    119 L/min 132 L/min
    System Pressure
    240 bar 245 bar

    Axles

    CASE 770 NXe Series CAT 424
    Rear Axle
    CARRARO 28.32M Enclosed; planetary reduction axle with a swinging design and differential lock; ensuring better traction and stability on uneven surfaces.
    Front Axle
    CNH PS1300 (2WD) Fixed; heavy-duty steering axle with 2WD or 4WD options; offering high ground clearance and durability for rough terrains.

    Service Capacities

    CASE 770 NXe Series CAT 424
    Fuel Tank
    129 L 160 L
    Engine Coolant
    20 L 20 L
    Engine Oil
    8.6 L 9 L
    Hydraulic Tank
    48 L 42 L
    Hydraulic System
    100 L 42 L
    Transmission
    18 L 14 L
    Rear Axle
    17.1 L NA

    Excavator Performance

    CASE 770 NXe Series CAT 424
    Maximum Digging Depth
    4400 mm 4138 mm
    Reach-Ground Level to Rear Wheel Centre
    6950 mm 6978 mm
    Reach-Ground Level to Slew Centre
    5630 mm 5612 mm
    Reach at Full Height to Slew Centre
    2150 mm NA
    Side Reach to Centre Line of Machine
    NA NA
    Maximum Working Height
    5490 mm 5701 mm
    Maximum Load Over Height
    3640 mm 4015 mm
    Bucket Rotation Angle
    185° 205°
    Bucket Digging force
    5000 kgf 5736 kgf
    Arm Digging force
    2751 kgf 6562 kgf
    Maximum Lift Capacity
    1417 kg NA
    Standard Bucket Capacity
    0.26 m³ 0.27 m³
    Standard Bucket Width
    NA NA

    Loader Performance

    CASE 770 NXe Series CAT 424
    Dump Height
    2720 mm 2794 mm
    Load Over Height
    3300 mm NA
    Pin Height
    3580 mm 3473 mm
    Pin Forward Reach
    240 mm NA
    Reach At Ground
    1980 mm NA
    Maximum Reach at Full Height
    1190 mm 1477 mm
    Max Reach Full Height Dumped
    760 mm 808 mm
    Below Ground Level Dig Depth
    110 mm 114 mm
    Rollback at Ground
    33° 38°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    5275 kgf 5380 kgf
    Loader Arm Breakout Force
    5110 kgf 5401 kgf
    Maximum Payload
    1925 kg NA

    Overall Dimensions And Weight

    CASE 770 NXe Series CAT 424
    Machine Weight
    7610 kg 8760 kg
    Overall Length
    5880 mm 5708 mm
    Wheelbase
    2180 mm 2200 mm
    Slew Centre to Rear Axle Centre
    NA NA
    Minimum Ground Clearance
    380 mm 350 mm
    Slew Ground Clearance
    NA NA
    Height of Cabin
    2880 mm 2928 mm
    Overall Height
    3850 mm 3732 mm
    Track Width-Rear
    1700 mm 1688 mm
    Track Width-Front
    1880 mm 1920 mm
    Width Over Bucket
    2280 mm 2346 mm

    Popular Comparisons with CASE 770 NXe Series

    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    JCB JCB 2DX
    4.5 rating
    ₹ 27-29 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Popular Comparisons with CAT 424

    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Frequently Asked Question

    Ans.

    The Caterpillar 424 is usually easier to service. Caterpillar has one of the biggest dealer and parts networks in India, so most towns have a service point nearby. The CASE 770 NXe also has good dealer support, but check the nearest CASE service centre before you buy in a smaller town.

    Ans.

    The CASE 770 NXe Series usually costs less to run. It is built for fuel efficiency, so your daily diesel bill stays lower. The Caterpillar 424 uses more fuel because it carries a bigger, more powerful engine, but that extra power helps on tougher, longer jobs.

    Ans.

    The Caterpillar 424 usually keeps its value better when sold later. Caterpillar is a well-known name across India, so more buyers look for a used one, and it sells faster. The CASE 770 NXe also sells well, but the pool of buyers is a little smaller.

    Ans.

    Yes, it is worth knowing before you buy. The CASE 770 NXe Series runs an older BS-III engine, while the Caterpillar 424 runs the newer BS-V engine. Ask your dealer about local rules on older engines in your state before you decide, especially if you plan to use the machine in a city.

    Ans.

    The CASE 770 NXe Series suits a small contractor who wants lower running cost on normal digging and loading jobs. The Caterpillar 424 suits a fleet owner or an EPC company that needs more engine power and speed for heavy, everyday work across many sites.

    CASE 770 NXe Series Vs CAT 424 - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 770 NXe Series Vs CAT 424 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare