Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    CASE 770 NXe Series VS JCB 3DX Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights CASE 770 NXe SeriesJCB 3DX
    CASE 770 NXe Series VS JCB 3DX Backhoe Loader
    CASE 770 49 HP Price
    CASE 770 NXe Series

    ₹ 22-24 lakh

    JCB 3DX Price
    JCB 3DX

    ₹ 30-32 Lakhs

    Particulars CASE 770 NXe Series JCB 3DX

    CASE 770 NXe vs JCB 3DX: Which One Should You Buy?

    Both machines dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The JCB 3DX is the most common backhoe in India. So many are working that parts are easy to find, most drivers already know it, and you can sell it fast later. The CASE 770 NXe has a bigger front loader and is known for good fuel use and a comfortable seat. It is a strong choice if the driver sits in it all day and you want lower running cost.

    Before you buy, think about a few simple things. Is there a service centre near you for that brand? Can you pay the loan easily every month? Will it be easy to sell after some years? These things matter more than one or two extra HP. You can also see the full CASE backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    CASE 770 NXe Backhoe Loader

    Pros:

    • Advanced hydraulics for better control
    • Enhanced operator comfort
    • Superior fuel efficiency
    • Excavator max lift capacity of 1417 kg
    • Shovel capacity of 1.1 m³

    Cons:

    • Lower engine torque compared to JCB 3DX
    • Slightly less digging force on both bucket and arm
    • Does not specify hydraulic tank capacity
    • Higher operational weight of 7610 kg

    JCB 3DX Backhoe Loader

    Pros:

    • Stage 5 engine for minimized fuel consumption
    • Higher bucket and arm digging force
    • Excavator max lift capacity of 1490 Kg
    • Improved maintenance with JCB 'Q' brakes
    • Integrated advanced safety structures

    Cons:

    • Union point higher system pressure
    • Slightly lower shovel capacity at 1.0 m³
    • Less powerful alternator compared to CASE 770 NXe

    Pros:

    Cons:

    Closing Recommendation

    Based on the specifications, if fuel efficiency and operator comfort are your top priorities, the CASE 770 NXe may be more suitable. However, if you seek maximum productivity with stronger digging and lifting capabilities, and prefer lesser maintenance, the JCB 3DX could be the better choice.

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Price, Technical Specifications & Features

    Brand CASE Backhoe Loader JCB Backhoe Loader
    Type 2WD 2WD/4WD
    Price ₹ 22-24 lakh ₹ 30-32 Lakhs
    Engine FPT 49.5 HP JCB 49 HP
    Bucket 0.26 m³ 0.26 m³
    Shovel 1.1 m³ 1.0 m³
    Max Digging Depth 4400 mm 4770 mm
    Max Dump Height 2720 mm 2740 mm
    Weight 7610 Kg 7200 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The JCB 3DX Backhoe Loader is India’s most popular entry-level machine, designed for contractors who value fuel efficiency, reliability, and low operating costs. It features a 49 HP Stage 5-430 engine, which offers about 10% lower fuel consumption, making it perfect for long working hours and rental uses. With a digging depth of about 4.77 m and stable hydraulics, it performs well in excavation, trenching, and loading tasks across small to mid-scale projects. Its straightforward controls and sturdy build minimize downtime and maintenance needs. Supported by JCB’s strong brand reputation, nationwide service network, and high resale value. The JCB 3DX price in India usually starts at ₹30–32 lakh, making it a solid choice for small contractors and municipal work.

    CASE 770 NXe vs JCB 3DX: Which One Should You Buy?

    Both machines dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The JCB 3DX is the most common backhoe in India. So many are working that parts are easy to find, most drivers already know it, and you can sell it fast later. The CASE 770 NXe has a bigger front loader and is known for good fuel use and a comfortable seat. It is a strong choice if the driver sits in it all day and you want lower running cost.

    Before you buy, think about a few simple things. Is there a service centre near you for that brand? Can you pay the loan easily every month? Will it be easy to sell after some years? These things matter more than one or two extra HP. You can also see the full CASE backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    CASE 770 NXe Backhoe Loader

    Pros:

    • Advanced hydraulics for better control
    • Enhanced operator comfort
    • Superior fuel efficiency
    • Excavator max lift capacity of 1417 kg
    • Shovel capacity of 1.1 m³

    Cons:

    • Lower engine torque compared to JCB 3DX
    • Slightly less digging force on both bucket and arm
    • Does not specify hydraulic tank capacity
    • Higher operational weight of 7610 kg

    JCB 3DX Backhoe Loader

    Pros:

    • Stage 5 engine for minimized fuel consumption
    • Higher bucket and arm digging force
    • Excavator max lift capacity of 1490 Kg
    • Improved maintenance with JCB 'Q' brakes
    • Integrated advanced safety structures

    Cons:

    • Union point higher system pressure
    • Slightly lower shovel capacity at 1.0 m³
    • Less powerful alternator compared to CASE 770 NXe

    Pros:

    Cons:

    Closing Recommendation

    Based on the specifications, if fuel efficiency and operator comfort are your top priorities, the CASE 770 NXe may be more suitable. However, if you seek maximum productivity with stronger digging and lifting capabilities, and prefer lesser maintenance, the JCB 3DX could be the better choice.

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Price, Technical Specifications & Features

    CASE 770 NXe Series JCB 3DX
    Brand
    CASE Backhoe Loader JCB Backhoe Loader
    Type
    2WD 2WD/4WD
    Price
    ₹ 22-24 lakh ₹ 30-32 Lakhs
    Engine
    FPT 49.5 HP JCB 49 HP
    Bucket
    0.26 m³ 0.26 m³
    Shovel
    1.1 m³ 1.0 m³
    Max Digging Depth
    4400 mm 4770 mm
    Max Dump Height
    2720 mm 2740 mm
    Weight
    7610 Kg 7200 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The JCB 3DX Backhoe Loader is India’s most popular entry-level machine, designed for contractors who value fuel efficiency, reliability, and low operating costs. It features a 49 HP Stage 5-430 engine, which offers about 10% lower fuel consumption, making it perfect for long working hours and rental uses. With a digging depth of about 4.77 m and stable hydraulics, it performs well in excavation, trenching, and loading tasks across small to mid-scale projects. Its straightforward controls and sturdy build minimize downtime and maintenance needs. Supported by JCB’s strong brand reputation, nationwide service network, and high resale value. The JCB 3DX price in India usually starts at ₹30–32 lakh, making it a solid choice for small contractors and municipal work.

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Key Highlights

    CASE 770 NXe Series JCB 3DX
    Engine Make FPT S8000 JCB 430
    Fuel Tank 129 L 128 L
    Max Torque 252.2 Nm @ 1200 RPM 270 Nm @ 1320 RPM
    Max Speed 32.4 km/hr 32.3 km/hr
    Hydraulic System 100 L 92 L
    Max Working Height 5490 mm 5970 mm
    Excavator Max Lift Capacity 1417 kg 1490 kg
    Loader Load Over Height 3640 mm 4180 mm
    Overall Length 5880 mm 6000 mm
    Wheel Base 2180 mm 2170 mm
    Bucket Digging Force 5000 kgf 5959 kgf
    Shovel Breakout Force 5275 kgf 5272 kgf
    Warranty 1 Year 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Key Highlights

    CASE 770 NXe Series JCB 3DX
    Engine Make
    FPT S8000 JCB 430
    Fuel Tank
    129 L 128 L
    Max Torque
    252.2 Nm @ 1200 RPM 270 Nm @ 1320 RPM
    Max Speed
    32.4 km/hr 32.3 km/hr
    Hydraulic System
    100 L 92 L
    Max Working Height
    5490 mm 5970 mm
    Excavator Max Lift Capacity
    1417 kg 1490 kg
    Loader Load Over Height
    3640 mm 4180 mm
    Overall Length
    5880 mm 6000 mm
    Wheel Base
    2180 mm 2170 mm
    Bucket Digging Force
    5000 kgf 5959 kgf
    Shovel Breakout Force
    5275 kgf 5272 kgf
    Warranty
    1 Year 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series JCB 3DX
    Model FPT 49.5 HP JCB 49 HP
    Type BS-III; Water Cooled. CRDi Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power 49.5 HP (37 kW) 49 HP (37 kW) @ 2050 RPM
    Max Torque 252.2 Nm @ 1200 RPM 270 Nm @ 1320 RPM
    Displacement 3.9 L 3.0 L
    Battery 12V / 110 Ah 12V
    Alternator NA 130A

    Transmission

    CASE 770 NXe Series JCB 3DX
    Type CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission JCB synchroshuttle transmission

    Steering

    CASE 770 NXe Series JCB 3DX
    Type Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure 140 bar 160 bar

    Steering Turning Circle

    CASE 770 NXe Series JCB 3DX
    Inner Wheels Braked - Outside Loader Bucket 4600 mm 8640 mm
    Inner Wheels Braked - Outside Wheels NA 6200 mm
    Inner Wheels not Braked - Outside Loader Bucket 5550 mm 11600 mm
    Inner Wheels not Braked - Outside Wheels NA 8940 mm

    Brakes

    CASE 770 NXe Series JCB 3DX
    Service Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc ype on the rear axle; well protected from dirt; water etc. equiring no maintenance.
    Parking Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 770 NXe Series JCB 3DX
    Front 9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR (Industrial)

    Speed

    CASE 770 NXe Series JCB 3DX
    Forward- 1st gear 5 km/hr 5 km/hr
    Reverse- 1st gear 5.9 km/hr 5 km/hr
    Forward- 2nd gear 7.9 km/hr 8 km/hr
    Reverse- 2nd gear 9.4 km/hr 5 km/hr
    Forward- 3rd gear 16.9 km/hr 17 km/hr
    Reverse- 3rd gear 19.8 km/hr Not Recommeded
    Forward- 4th gear 32.4 km/hr 32.3 km/hr
    Reverse- 4th gear Not recommended Not Recommeded

    Hydraulics

    CASE 770 NXe Series JCB 3DX
    Type Open Center Load Sensing system; Axial Piston with Electric Displacement Control Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow 119 L/min 114 L/min @ 2000 RPM
    System Pressure 240 bar 270 bar

    Axles

    CASE 770 NXe Series JCB 3DX
    Rear Axle CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16

    Service Capacities

    CASE 770 NXe Series JCB 3DX
    Fuel Tank 129 L 128 L
    Engine Coolant 20 L 16.5 L
    Engine Oil 8.6 L 15 L
    Hydraulic Tank 48 L NA
    Hydraulic System 100 L 92 L
    Transmission 18 L 17.5 L
    Rear Axle 17.1 L 20 L

    Excavator Performance

    CASE 770 NXe Series JCB 3DX
    Maximum Digging Depth 4400 mm 4770 mm
    Reach-Ground Level to Rear Wheel Centre 6950 mm 6720 mm
    Reach-Ground Level to Slew Centre 5630 mm 5400 mm
    Reach at Full Height to Slew Centre 2150 mm 2900 mm
    Side Reach to Centre Line of Machine NA 6020 mm
    Maximum Working Height 5490 mm 5970 mm
    Maximum Load Over Height 3640 mm 4180 mm
    Bucket Rotation Angle 185° 185°
    Bucket Digging force 5000 kgf 5959 kgf
    Arm Digging force 2751 kgf 3257 kgf
    Maximum Lift Capacity 1417 kg 1490 kg
    Standard Bucket Capacity 0.26 m³ 0.26 m³
    Standard Bucket Width NA 790 mm

    Loader Performance

    CASE 770 NXe Series JCB 3DX
    Dump Height 2720 mm 2740 mm
    Load Over Height 3300 mm 3320 mm
    Pin Height 3580 mm 3540 mm
    Pin Forward Reach 240 mm 250 mm
    Reach At Ground 1980 mm 1520 mm
    Maximum Reach at Full Height 1190 mm 1150 mm
    Max Reach Full Height Dumped 760 mm 880 mm
    Below Ground Level Dig Depth 110 mm 70 mm
    Rollback at Ground 33° 45°
    Dump Angle 45° 38°
    Shovel Breakout Force 5275 kgf 5272 kgf
    Loader Arm Breakout Force 5110 kgf 5635 kgf
    Maximum Payload 1925 kg 1650 kg

    Overall Dimensions And Weight

    CASE 770 NXe Series JCB 3DX
    Machine Weight 7610 kg 7200 kg
    Overall Length 5880 mm 6000 mm
    Wheelbase 2180 mm 2170 mm
    Slew Centre to Rear Axle Centre NA 1320 mm
    Minimum Ground Clearance 380 mm 310 mm
    Slew Ground Clearance NA 510 mm
    Height of Cabin 2880 mm 2870 mm
    Overall Height 3850 mm 3610 mm
    Track Width-Rear 1700 mm 1730 mm
    Track Width-Front 1880 mm 1860 mm
    Width Over Bucket 2280 mm 2350 mm

    CASE 770 NXe Series Vs JCB 3DX Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series JCB 3DX
    Model
    FPT 49.5 HP JCB 49 HP
    Type
    BS-III; Water Cooled. CRDi Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power
    49.5 HP (37 kW) 49 HP (37 kW) @ 2050 RPM
    Max Torque
    252.2 Nm @ 1200 RPM 270 Nm @ 1320 RPM
    Displacement
    3.9 L 3.0 L
    Battery
    12V / 110 Ah 12V
    Alternator
    NA 130A

    Transmission

    CASE 770 NXe Series JCB 3DX
    Type
    CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission JCB synchroshuttle transmission

    Steering

    CASE 770 NXe Series JCB 3DX
    Type
    Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure
    140 bar 160 bar

    Steering Turning Circle

    CASE 770 NXe Series JCB 3DX
    Inner Wheels Braked - Outside Loader Bucket
    4600 mm 8640 mm
    Inner Wheels Braked - Outside Wheels
    NA 6200 mm
    Inner Wheels not Braked - Outside Loader Bucket
    5550 mm 11600 mm
    Inner Wheels not Braked - Outside Wheels
    NA 8940 mm

    Brakes

    CASE 770 NXe Series JCB 3DX
    Service
    Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc ype on the rear axle; well protected from dirt; water etc. equiring no maintenance.
    Parking
    Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 770 NXe Series JCB 3DX
    Front
    9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear
    16.9 x 28 - 12 PR 16.9 x 28 - 12 PR (Industrial)

    Speed

    CASE 770 NXe Series JCB 3DX
    Forward- 1st gear
    5 km/hr 5 km/hr
    Reverse- 1st gear
    5.9 km/hr 5 km/hr
    Forward- 2nd gear
    7.9 km/hr 8 km/hr
    Reverse- 2nd gear
    9.4 km/hr 5 km/hr
    Forward- 3rd gear
    16.9 km/hr 17 km/hr
    Reverse- 3rd gear
    19.8 km/hr Not Recommeded
    Forward- 4th gear
    32.4 km/hr 32.3 km/hr
    Reverse- 4th gear
    Not recommended Not Recommeded

    Hydraulics

    CASE 770 NXe Series JCB 3DX
    Type
    Open Center Load Sensing system; Axial Piston with Electric Displacement Control Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow
    119 L/min 114 L/min @ 2000 RPM
    System Pressure
    240 bar 270 bar

    Axles

    CASE 770 NXe Series JCB 3DX
    Rear Axle
    CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle
    CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16

    Service Capacities

    CASE 770 NXe Series JCB 3DX
    Fuel Tank
    129 L 128 L
    Engine Coolant
    20 L 16.5 L
    Engine Oil
    8.6 L 15 L
    Hydraulic Tank
    48 L NA
    Hydraulic System
    100 L 92 L
    Transmission
    18 L 17.5 L
    Rear Axle
    17.1 L 20 L

    Excavator Performance

    CASE 770 NXe Series JCB 3DX
    Maximum Digging Depth
    4400 mm 4770 mm
    Reach-Ground Level to Rear Wheel Centre
    6950 mm 6720 mm
    Reach-Ground Level to Slew Centre
    5630 mm 5400 mm
    Reach at Full Height to Slew Centre
    2150 mm 2900 mm
    Side Reach to Centre Line of Machine
    NA 6020 mm
    Maximum Working Height
    5490 mm 5970 mm
    Maximum Load Over Height
    3640 mm 4180 mm
    Bucket Rotation Angle
    185° 185°
    Bucket Digging force
    5000 kgf 5959 kgf
    Arm Digging force
    2751 kgf 3257 kgf
    Maximum Lift Capacity
    1417 kg 1490 kg
    Standard Bucket Capacity
    0.26 m³ 0.26 m³
    Standard Bucket Width
    NA 790 mm

    Loader Performance

    CASE 770 NXe Series JCB 3DX
    Dump Height
    2720 mm 2740 mm
    Load Over Height
    3300 mm 3320 mm
    Pin Height
    3580 mm 3540 mm
    Pin Forward Reach
    240 mm 250 mm
    Reach At Ground
    1980 mm 1520 mm
    Maximum Reach at Full Height
    1190 mm 1150 mm
    Max Reach Full Height Dumped
    760 mm 880 mm
    Below Ground Level Dig Depth
    110 mm 70 mm
    Rollback at Ground
    33° 45°
    Dump Angle
    45° 38°
    Shovel Breakout Force
    5275 kgf 5272 kgf
    Loader Arm Breakout Force
    5110 kgf 5635 kgf
    Maximum Payload
    1925 kg 1650 kg

    Overall Dimensions And Weight

    CASE 770 NXe Series JCB 3DX
    Machine Weight
    7610 kg 7200 kg
    Overall Length
    5880 mm 6000 mm
    Wheelbase
    2180 mm 2170 mm
    Slew Centre to Rear Axle Centre
    NA 1320 mm
    Minimum Ground Clearance
    380 mm 310 mm
    Slew Ground Clearance
    NA 510 mm
    Height of Cabin
    2880 mm 2870 mm
    Overall Height
    3850 mm 3610 mm
    Track Width-Rear
    1700 mm 1730 mm
    Track Width-Front
    1880 mm 1860 mm
    Width Over Bucket
    2280 mm 2350 mm

    Popular Comparisons with CASE 770 NXe Series

    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    JCB JCB 2DX
    4.5 rating
    ₹ 27-29 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Popular Comparisons with JCB 3DX

    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Frequently Asked Question

    Ans.

    The JCB 3DX is easier to sell. It is the most common backhoe in India. Many people want to buy or rent it. So you can sell it fast and get a fair price. The CASE 770 NXe also sells, but fewer buyers look for it, so it can take more time. If an easy sale later matters to you, the JCB 3DX is the safer choice.

    Ans.

    For the JCB 3DX, yes, almost everywhere. JCB has the biggest service network in India, so parts come fast and many mechanics know the machine. CASE service is good in many places too, but it is not as wide. Before you buy the CASE 770 NXe, check that there is a CASE dealer or service centre near your work.

    Ans.

    The CASE 770 NXe is known for good fuel use, so day-to-day fuel cost can be lower. This helps when the machine runs long hours. The JCB 3DX keeps cost down in another way: parts are cheap and easy to get, and repairs are quick. So think about both fuel and repairs, not fuel alone.

    Ans.

    The CASE 770 NXe has a bigger front loader, so it moves a little more soil or material in each pass. The JCB 3DX digs a little deeper at the back. If most of your work is loading trucks and moving material, the CASE loader helps. If you dig more, the JCB back digger helps.

    Ans.

    Yes, very easily. Banks, finance companies, and the brand dealers all give loans for both machines. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders first. Do not take the first EMI offer.

    Ans.

    The JCB 3DX is easier for a new driver. It is so common that most drivers in India have already run one, so you find trained drivers fast. The CASE 770 NXe has a comfortable seat and is not hard to learn, but fewer drivers know it, so you may need to train them first.

    CASE 770 NXe Series Vs JCB 3DX - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 770 NXe Series Vs JCB 3DX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare