L&T 990HFi VS SANY STR90C-10 PRO Compactor

₹ 35-37 Lakhs^*

L&T 990HFi

Weight

9200 kg
Drum Width

1680 mm
Engine

M&M 74.8 HP
Static Load

27.4 kg/cm
CF - Hi/Low

73.7/53 kN
Travel Speed

0 - 12 km/hr

Tandem Roller

₹ 32-34 Lakhs^*

SANY STR90C-10 PRO

Weight

9200 kg
Drum Width

1680 mm
Engine

Ashok Leyland 74 HP
Static Load

27.4 kg/cm
CF - Hi/Low

75/60 kN
Travel Speed

0 - 12 km/hr

Tandem Roller

Add Equipment

The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

L&T 990HFi VS SANY STR90C-10 PRO Compactor

L&T 990HFi

₹ 35-37 Lakhs

SANY STR90C-10 PRO

₹ 32-34 Lakhs

Particulars	L&T 990HFi	SANY STR90C-10 PRO

L&T 990HFi vs SANY STR90C-10 PRO: Which One to Buy?

Both are tandem rollers for road and asphalt compaction, close in engine power and drum width. The L&T 990HFi handles slopes better and carries a bigger fuel tank, so it can run longer on hilly stretches without a fuel stop. The SANY STR90C-10 PRO carries a much bigger water tank and adds a dual-frequency vibration system, which helps on longer flat stretches and varied compaction needs.

For a road contractor working on hilly or sloped stretches, the L&T 990HFi's higher gradeability and larger fuel tank cut down on stops through the shift. For a contractor doing long flat runs where water refilling is the bigger delay, the SANY STR90C-10 PRO's larger water tank keeps the roller working longer between stops. Check driver comfort and parts stock for both brands near your project. See the full L&T compactor range, the SANY range, or the compactor buying guide.

L&T 990HFi

Pros:

Robust CEV V Mahindra engine with 74.8 HP for powerful performance
Good gradeability of 36% suited for varying terrain
Large fuel tank capacity of 140 L for longer operation
High centrifugal force of 73.7/53 kN for efficient compaction
Advanced features such as hydrostatic drive and pressure spray water system

Cons:

Slightly lower maximum operating weight compared to the SANY STR90C-10 PRO, potential impact on compaction
Overall width larger than SANY model, which might affect maneuverability in tight spaces
Travel and steering specifications such as turning radius on the outside are missing

SANY STR90C-10 PRO

Pros:

Comparable powerful engine with 74 HP and efficient hydraulic drive system
Larger water tank of 800 L which may reduce refilling stops
Slightly better service brakes with hydraulic service brake system
Dual-frequency, dual-amplitude hydraulic vibration system for varied compaction needs
Increased ground clearance of 330 mm allows better operation on uneven surfaces

Cons:

Lower maximum gradeability of 30% which may not perform as well on steep inclines
Some engine and torque specifications are not available for comparison
Turning radius information missing which may affect assessment of maneuverability

Closing Recommendation

Both rollers are close in power and size, so weigh slope handling and fuel range against water capacity and vibration control. The L&T 990HFi climbs slopes better and runs longer on fuel, which suits hilly routes and longer working days. The SANY STR90C-10 PRO carries more water and offers a dual-frequency vibration system, which suits long flat stretches with varied compaction needs. So match the machine to your work: L&T 990HFi for sloped roads and longer fuel range, SANY STR90C-10 PRO for flat stretches and varied compaction control.