Schwing Stetter SP 1800 E Vs Schwing Stetter SP 4800
Loading…
Schwing Stetter SP 1800 E
VS
Schwing Stetter SP 4800
Concrete Pump
Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800: the two differ on 16 of 27 listed specs. The main differences are Engine (100.6 HP vs 443 HP), Ex-Factory Price (GST incl.) (₹30 – ₹37 lakh vs ₹35 – ₹45 lakh), Max. Output (73 m³/hr vs 66 m³/hr), SPM (24 vs 22). The other 11 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Schwing Stetter SP 1800 E
VS
Schwing Stetter SP 4800
Concrete Pump
Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800: the two differ on 16 of 27 listed specs. The main differences are Engine (100.6 HP vs 443 HP), Ex-Factory Price (GST incl.) (₹30 – ₹37 lakh vs ₹35 – ₹45 lakh), Max. Output (73 m³/hr vs 66 m³/hr), SPM (24 vs 22). The other 11 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
Schwing Stetter SP 1800 E
₹30 – ₹37 lakh
Schwing Stetter SP 4800
₹35 – ₹45 lakh
Particulars
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Schwing Stetter SP 4800 vs SP 1800 E: Which One to Buy?
The main difference is the power source, and that changes everything else. The tables below give the full numbers. Here is the simple difference. The Schwing Stetter SP 4800 runs on a large diesel engine and pushes concrete at very high pressure, so it can send concrete deep into a tunnel or up a tall building. The Schwing Stetter SP 1800 E runs on electricity, so it makes no smoke, works quietly and costs less to run every hour.
So the first question is simple: does your site have a strong, steady power connection? If yes, and the concrete does not have to travel very far or very high, the electric pump saves money on every pour. If your site is a deep tunnel, a tall structure, or a place with no power, the diesel SP 4800 is the one that can do the job at all. See the Schwing Stetter concrete pump range, the full concrete pump list, or our concrete pump guide to understand the choice better.
Schwing Stetter SP 1800 E
Pros:
Electric engine offers low operating costs and zero emissions
Handles stiff concrete mixes efficiently with the RL Rock valve
Reduced hydraulic heat during high-output pours due to Hi-flow spool block
Suitable for large infrastructure and tunnel construction projects
Cons:
Lower maximum pressure of 112 bar compared to competitors
Limited theoretical output of 73 m³/hr
Schwing Stetter SP 4800
Pros:
High engine power of 443 HP for demanding projects
Sustains a maximum concrete pressure of 243 bar, one of the highest available
Designed for deep tunnel and ultra high-rise construction projects
Prevents hopper blockages with high-torque agitator drive
Cons:
Higher emissions due to diesel engine
Higher price range of ₹1.10–1.30 Crore
Pros:
Cons:
Closing Recommendation
These two pumps are for different sites, so start with your power supply and your pipeline. Choose the Schwing Stetter SP 1800 E when your site has strong, steady electricity, when the pour line is not very long or very high, and when low running cost, quiet work and no smoke matter to you. Choose the Schwing Stetter SP 4800 when you pump into a deep tunnel or a tall building, when the pipeline is long, or when no reliable power connection exists on site. Also check how your contractors book work, because that decides how many days the pump earns. So match the machine to your work: SP 4800 for deep and high pumping on any site, SP 1800 E for clean, low-cost pouring where power is ready.
Schwing Stetter SP 1800 E Vs Schwing Stetter SP 4800 Concrete Pump Price, Technical Specifications & Features
The Schwing Stetter SP 1800 E is a 73 m³/hr electric stationary concrete pump built for large infrastructure pours, tunnel construction, and emission-restricted project sites. A 100.6 HP electric drive cuts diesel fuel costs and exhaust entirely, holding up to 112 bar of concrete pressure. On long contracts where running costs drive machine selection, this makes a straightforward case for going electric. The RL Rock valve handles stiff concrete mixes without slowing the cycle. The SP 1800 E uses a Hi-flow spool block that reduces hydraulic heat during high-output pours, and an auto-governed electric drive that prevents motor overload during extended pumping cycles. Chosen by project managers and EPC contractors for large infrastructure and tunnel construction projects across India. The Schwing Stetter SP 1800 E concrete pump price in India ranges between ?60–70 Lakhs. The right electric choice for project managers who need high-capacity output on large infrastructure and tunnel contracts where fuel costs and emissions are a deciding factor.
The Schwing Stetter SP 4800 is a 66 m³/hr ultra high-pressure stationary concrete pump built for deep tunnel concreting, high-rise structural pours, and demanding mass concreting projects. With 443 HP behind it, twin Hydromatik axial piston pumps sustain up to 243 bar of concrete pressure — among the highest available on any stationary pump in India. Output stays steady across the punishing pour cycles of deep foundation and ultra high-rise sites. The SP 4800 uses a high-torque agitator drive that maintains continuous paddle rotation through the coarsest concrete mixes, preventing hopper blockages that would require a full shutdown. Used on ultra high-rise, deep tunnel, and large dam construction projects by specialist contractors across India. The Schwing Stetter SP 4800 concrete pump price in India ranges between ?1.10–1.30 Crore. The right specialist pump for contractors who need sustained ultra high-pressure output on pours that standard machines cannot reach.
Schwing Stetter SP 4800 vs SP 1800 E: Which One to Buy?
The main difference is the power source, and that changes everything else. The tables below give the full numbers. Here is the simple difference. The Schwing Stetter SP 4800 runs on a large diesel engine and pushes concrete at very high pressure, so it can send concrete deep into a tunnel or up a tall building. The Schwing Stetter SP 1800 E runs on electricity, so it makes no smoke, works quietly and costs less to run every hour.
So the first question is simple: does your site have a strong, steady power connection? If yes, and the concrete does not have to travel very far or very high, the electric pump saves money on every pour. If your site is a deep tunnel, a tall structure, or a place with no power, the diesel SP 4800 is the one that can do the job at all. See the Schwing Stetter concrete pump range, the full concrete pump list, or our concrete pump guide to understand the choice better.
Schwing Stetter SP 1800 E
Pros:
Electric engine offers low operating costs and zero emissions
Handles stiff concrete mixes efficiently with the RL Rock valve
Reduced hydraulic heat during high-output pours due to Hi-flow spool block
Suitable for large infrastructure and tunnel construction projects
Cons:
Lower maximum pressure of 112 bar compared to competitors
Limited theoretical output of 73 m³/hr
Schwing Stetter SP 4800
Pros:
High engine power of 443 HP for demanding projects
Sustains a maximum concrete pressure of 243 bar, one of the highest available
Designed for deep tunnel and ultra high-rise construction projects
Prevents hopper blockages with high-torque agitator drive
Cons:
Higher emissions due to diesel engine
Higher price range of ₹1.10–1.30 Crore
Pros:
Cons:
Closing Recommendation
These two pumps are for different sites, so start with your power supply and your pipeline. Choose the Schwing Stetter SP 1800 E when your site has strong, steady electricity, when the pour line is not very long or very high, and when low running cost, quiet work and no smoke matter to you. Choose the Schwing Stetter SP 4800 when you pump into a deep tunnel or a tall building, when the pipeline is long, or when no reliable power connection exists on site. Also check how your contractors book work, because that decides how many days the pump earns. So match the machine to your work: SP 4800 for deep and high pumping on any site, SP 1800 E for clean, low-cost pouring where power is ready.
Schwing Stetter SP 1800 E Vs Schwing Stetter SP 4800 Concrete Pump Price, Technical Specifications & Features
The Schwing Stetter SP 1800 E is a 73 m³/hr electric stationary concrete pump built for large infrastructure pours, tunnel construction, and emission-restricted project sites. A 100.6 HP electric drive cuts diesel fuel costs and exhaust entirely, holding up to 112 bar of concrete pressure. On long contracts where running costs drive machine selection, this makes a straightforward case for going electric. The RL Rock valve handles stiff concrete mixes without slowing the cycle. The SP 1800 E uses a Hi-flow spool block that reduces hydraulic heat during high-output pours, and an auto-governed electric drive that prevents motor overload during extended pumping cycles. Chosen by project managers and EPC contractors for large infrastructure and tunnel construction projects across India. The Schwing Stetter SP 1800 E concrete pump price in India ranges between ?60–70 Lakhs. The right electric choice for project managers who need high-capacity output on large infrastructure and tunnel contracts where fuel costs and emissions are a deciding factor.
The Schwing Stetter SP 4800 is a 66 m³/hr ultra high-pressure stationary concrete pump built for deep tunnel concreting, high-rise structural pours, and demanding mass concreting projects. With 443 HP behind it, twin Hydromatik axial piston pumps sustain up to 243 bar of concrete pressure — among the highest available on any stationary pump in India. Output stays steady across the punishing pour cycles of deep foundation and ultra high-rise sites. The SP 4800 uses a high-torque agitator drive that maintains continuous paddle rotation through the coarsest concrete mixes, preventing hopper blockages that would require a full shutdown. Used on ultra high-rise, deep tunnel, and large dam construction projects by specialist contractors across India. The Schwing Stetter SP 4800 concrete pump price in India ranges between ?1.10–1.30 Crore. The right specialist pump for contractors who need sustained ultra high-pressure output on pours that standard machines cannot reach.
16 differ · 11 identical
Key highlights: Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800 Concrete Pump
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Engine Type
Electric Engine
Disel Engine
Delivery Cylinder Stroke
1600 mm
2000 mm
Weight
NA
NA
Warranty
1 Yr. / 1000 hr
1 Yr. / 1000 hr
Overall Length
NA
NA
Key highlights: Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800 Concrete Pump
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Engine Type
Electric Engine
Disel Engine
Delivery Cylinder Stroke
1600 mm
2000 mm
Weight
Not Available
Not Available
Warranty
1 Yr. / 1000 hr
1 Yr. / 1000 hr
Overall Length
NA
NA
Full specifications: Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800 Concrete Pump
Engine
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Max Engine Power
100.6 HP (75 kW) @ 2100 rpm
443 HP (330 kW) @ 2100 rpm
Engine Type
Electric Engine
Disel Engine
Performance
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Max Theoretical Output
73 m³/hr (rod) / 42 m³/hr (piston)
66 m³/hr (rod) / 43 m³/hr (piston)
No. of Strokes Per Minute
24 (rod) / 14 (piston)
22 (rod) / 14 (piston)
Max Concrete Pressure
112 bar
243 bar
Pumping System
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Delivery Cylinder Stroke
1600 mm
2000 mm
Delivery Cylinder Diameter
200 mm
180 mm
Weight And Dimension
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Machine Weight
5200 kg
8000 kg
Overall Length
NA
NA
Overall Width
NA
NA
Overall Height
NA
NA
Hydraulic System
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Hydraulic System Pressure
NA
NA
Hopper Capacity
600 L
600 L
Full specifications: Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800 Concrete Pump
Engine
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Max Engine Power
100.6 HP (75 kW) @ 2100 rpm
443 HP (330 kW) @ 2100 rpm
Engine Type
Electric Engine
Disel Engine
Performance
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Max Theoretical Output
73 m³/hr (rod) / 42 m³/hr (piston)
66 m³/hr (rod) / 43 m³/hr (piston)
No. of Strokes Per Minute
24 (rod) / 14 (piston)
22 (rod) / 14 (piston)
Max Concrete Pressure
112 bar
243 bar
Pumping System
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Delivery Cylinder Stroke
1600 mm
2000 mm
Delivery Cylinder Diameter
200 mm
180 mm
Weight & Dimensions
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Machine Weight
5200 kg
8000 kg
Overall Length
NA
NA
Overall Width
NA
NA
Overall Height
NA
NA
Hydraulic System
Schwing Stetter SP 1800 E
Schwing Stetter SP 4800
Hydraulic System Pressure
NA
NA
Hopper Capacity
600 L
600 L
Popular Comparisons with Schwing Stetter SP 1800 E
Questions buyers ask about the Schwing Stetter SP 1800 E vs Schwing Stetter SP 4800
Ans.
An electric pump needs a strong and steady power supply at the pump point. That usually means a proper site connection or a large generator, plus correct cabling and safety gear. If power cuts are common, pouring will stop midway. Check this first, because the SP 1800 E is only cheaper to run if the supply is reliable.
Ans.
The SP 4800 pushes concrete much further. It holds a far higher concrete pressure, so it can feed a long pipeline into a deep tunnel or up many floors of a tall building. The SP 1800 E is made for high output over shorter, easier lines. For long or steep pipelines, the diesel pump is the right tool.
Ans.
The SP 1800 E costs less per hour because electricity is cheaper than diesel for the same work, and the electric motor needs less service. The SP 4800 burns a lot of diesel at full load. On a long project with steady power, the electric pump can save a large amount over the months.
Ans.
Yes. The SP 1800 E gives no engine smoke at the pump and runs much more quietly, which helps on city sites, hospital and school areas, and inside tunnels where air quality is checked. The SP 4800 is a diesel machine, so it needs proper ventilation in closed spaces and can face restrictions in some city work.
Ans.
The SP 4800 gets more hire calls today because most Indian sites still work on diesel and need long-distance pumping. The SP 1800 E suits long-running metro, tunnel and large building contracts where the power is already there. If you buy for hire, ask your regular contractors which kind of pour they will book most in the coming year.
Schwing Stetter SP 1800 E Vs Schwing Stetter SP 4800 - Compare Price & Availability Across 600+ Locations in India
Compare Schwing Stetter SP 1800 E Vs Schwing Stetter SP 4800 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
