Schwing Stetter SP 1807 vs Schwing Stetter SP 4800: the two differ on 14 of 27 listed specs. The main differences are Engine (100.6 HP vs 443 HP), Ex-Factory Price (GST incl.) (₹30 – ₹36 lakh vs ₹35 – ₹45 lakh), Max. Output (72 m³/hr vs 66 m³/hr), SPM (27 vs 22). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Schwing Stetter SP 1807 vs Schwing Stetter SP 4800: the two differ on 14 of 27 listed specs. The main differences are Engine (100.6 HP vs 443 HP), Ex-Factory Price (GST incl.) (₹30 – ₹36 lakh vs ₹35 – ₹45 lakh), Max. Output (72 m³/hr vs 66 m³/hr), SPM (27 vs 22). The other 13 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
Schwing Stetter SP 1807
₹30 – ₹36 lakh
Schwing Stetter SP 4800
₹35 – ₹45 lakh
Particulars
Schwing Stetter SP 1807
Schwing Stetter SP 4800
Schwing Stetter SP 1807 vs SP 4800: Which One to Buy?
Both are stationary concrete pumps, which stay in one place and push concrete through a pipeline to where it is needed. The tables below carry the full numbers. The Schwing Stetter SP 1807 is the lighter machine with steady output, made for high-rise buildings and bridge work. The Schwing Stetter SP 4800 gives far higher pressure and power, which is what deep tunnels and mass concrete work need.
Pressure is the real dividing line. The further and higher you push concrete, and the stiffer the mix, the more pressure the pump needs. Ask your engineer for the longest pipeline run and the highest lift on your job, then pick the pump that covers it with room to spare. See other Schwing Stetter concrete pumps, the wider concrete pump range, or read our concrete pump guide.
Schwing Stetter SP 1807
Pros:
High output rate of 72 m³/hr.
Maximum concrete pressure of 112 bar.
Fast rock valve switching reduces dead time.
Lightweight at 4530 kg for easier transport.
Cons:
Lower engine power at 100.6 HP compared to SP 4800.
Limited maximum concrete pressure compared to competitors.
Schwing Stetter SP 4800
Pros:
High engine power of 443 HP for superior performance.
Maximum concrete pressure of 243 bar, ideal for demanding projects.
Robust design suitable for ultra high-rise and deep tunnel construction.
Consistent output across challenging pour cycles.
Cons:
Lower theoretical output at 66 m³/hr compared to SP 1807.
Heavier at 8000 kg, which may affect transport efficiency.
Pros:
Cons:
Closing Recommendation
Both are dependable stationary pumps, so let the distance and the mix decide. Choose the Schwing Stetter SP 1807 for high-rise buildings and bridge work, where its steady output and lighter build make it easy to place and shift around the site. Choose the Schwing Stetter SP 4800 for deep tunnels and mass concreting, where much higher pressure is needed to push stiff concrete over long runs without blockages. So match the machine to your work: SP 1807 for buildings and bridges, SP 4800 for tunnels and heavy mass concrete.
Schwing Stetter SP 1807 Vs Schwing Stetter SP 4800 Concrete Pump Price, Technical Specifications & Features
The Schwing Stetter SP 1807 is a 72 m³/hr stationary concrete pump built for high-rise construction, bridge deck work, and large slab casting projects. Producing 100.6 HP, a new-generation RL Rock valve and output-governed hydraulic pump direct engine power exactly where the pour needs it most, reaching up to 112 bar of concrete pressure. The SP 1807 features fast rock valve switching that reduces dead time between strokes, directly increasing effective output on long continuous high-rise and bridge deck pour cycles. A standard 10-metre cable remote keeps the operator in full control from anywhere on site. Trusted by project managers and EPC contractors on high-rise and bridge construction projects across India. The Schwing Stetter SP 1807 concrete pump price in India ranges between ?58–68 Lakhs. The right choice for project managers who want fast valve switching and output-governed efficiency on high-rise and bridge contracts.
The Schwing Stetter SP 4800 is a 66 m³/hr ultra high-pressure stationary concrete pump built for deep tunnel concreting, high-rise structural pours, and demanding mass concreting projects. With 443 HP behind it, twin Hydromatik axial piston pumps sustain up to 243 bar of concrete pressure — among the highest available on any stationary pump in India. Output stays steady across the punishing pour cycles of deep foundation and ultra high-rise sites. The SP 4800 uses a high-torque agitator drive that maintains continuous paddle rotation through the coarsest concrete mixes, preventing hopper blockages that would require a full shutdown. Used on ultra high-rise, deep tunnel, and large dam construction projects by specialist contractors across India. The Schwing Stetter SP 4800 concrete pump price in India ranges between ?1.10–1.30 Crore. The right specialist pump for contractors who need sustained ultra high-pressure output on pours that standard machines cannot reach.
Schwing Stetter SP 1807 vs SP 4800: Which One to Buy?
Both are stationary concrete pumps, which stay in one place and push concrete through a pipeline to where it is needed. The tables below carry the full numbers. The Schwing Stetter SP 1807 is the lighter machine with steady output, made for high-rise buildings and bridge work. The Schwing Stetter SP 4800 gives far higher pressure and power, which is what deep tunnels and mass concrete work need.
Pressure is the real dividing line. The further and higher you push concrete, and the stiffer the mix, the more pressure the pump needs. Ask your engineer for the longest pipeline run and the highest lift on your job, then pick the pump that covers it with room to spare. See other Schwing Stetter concrete pumps, the wider concrete pump range, or read our concrete pump guide.
Schwing Stetter SP 1807
Pros:
High output rate of 72 m³/hr.
Maximum concrete pressure of 112 bar.
Fast rock valve switching reduces dead time.
Lightweight at 4530 kg for easier transport.
Cons:
Lower engine power at 100.6 HP compared to SP 4800.
Limited maximum concrete pressure compared to competitors.
Schwing Stetter SP 4800
Pros:
High engine power of 443 HP for superior performance.
Maximum concrete pressure of 243 bar, ideal for demanding projects.
Robust design suitable for ultra high-rise and deep tunnel construction.
Consistent output across challenging pour cycles.
Cons:
Lower theoretical output at 66 m³/hr compared to SP 1807.
Heavier at 8000 kg, which may affect transport efficiency.
Pros:
Cons:
Closing Recommendation
Both are dependable stationary pumps, so let the distance and the mix decide. Choose the Schwing Stetter SP 1807 for high-rise buildings and bridge work, where its steady output and lighter build make it easy to place and shift around the site. Choose the Schwing Stetter SP 4800 for deep tunnels and mass concreting, where much higher pressure is needed to push stiff concrete over long runs without blockages. So match the machine to your work: SP 1807 for buildings and bridges, SP 4800 for tunnels and heavy mass concrete.
Schwing Stetter SP 1807 Vs Schwing Stetter SP 4800 Concrete Pump Price, Technical Specifications & Features
The Schwing Stetter SP 1807 is a 72 m³/hr stationary concrete pump built for high-rise construction, bridge deck work, and large slab casting projects. Producing 100.6 HP, a new-generation RL Rock valve and output-governed hydraulic pump direct engine power exactly where the pour needs it most, reaching up to 112 bar of concrete pressure. The SP 1807 features fast rock valve switching that reduces dead time between strokes, directly increasing effective output on long continuous high-rise and bridge deck pour cycles. A standard 10-metre cable remote keeps the operator in full control from anywhere on site. Trusted by project managers and EPC contractors on high-rise and bridge construction projects across India. The Schwing Stetter SP 1807 concrete pump price in India ranges between ?58–68 Lakhs. The right choice for project managers who want fast valve switching and output-governed efficiency on high-rise and bridge contracts.
The Schwing Stetter SP 4800 is a 66 m³/hr ultra high-pressure stationary concrete pump built for deep tunnel concreting, high-rise structural pours, and demanding mass concreting projects. With 443 HP behind it, twin Hydromatik axial piston pumps sustain up to 243 bar of concrete pressure — among the highest available on any stationary pump in India. Output stays steady across the punishing pour cycles of deep foundation and ultra high-rise sites. The SP 4800 uses a high-torque agitator drive that maintains continuous paddle rotation through the coarsest concrete mixes, preventing hopper blockages that would require a full shutdown. Used on ultra high-rise, deep tunnel, and large dam construction projects by specialist contractors across India. The Schwing Stetter SP 4800 concrete pump price in India ranges between ?1.10–1.30 Crore. The right specialist pump for contractors who need sustained ultra high-pressure output on pours that standard machines cannot reach.
Questions buyers ask about the Schwing Stetter SP 1807 vs Schwing Stetter SP 4800
Ans.
The Schwing Stetter SP 1807 suits most high-rise and bridge work. It balances output with a lighter machine, so it is easier to place and move on a building site. For normal tower construction its pressure is enough to reach the upper floors.
Ans.
The Schwing Stetter SP 4800 is the one for tunnels and mass concreting. Those jobs need much higher pressure to push stiff concrete over long distances, and this pump is built for it. Using an under-sized pump there causes blockages and lost time.
Ans.
Work out the longest pipeline distance and the greatest height on the job, and share both with the dealer. The pump must handle that with margin, because a pipeline bend or a stiffer mix raises the pressure needed. Buying with no margin leads to blockages.
Ans.
The SP 1807 is easier. It is the lighter machine, so shifting it between sites and placing it in a crowded building site takes less effort and less space. The SP 4800 is a bigger installation and needs more planning for space and power.
Ans.
Plan for pipeline, wear plates and rams, which wear out with the concrete passing through them. Higher pressure work wears parts faster, so ask the dealer for part life and price for the kind of work you do. Also make sure your driver is trained to clean the line properly after every pour.
Schwing Stetter SP 1807 Vs Schwing Stetter SP 4800 - Compare Price & Availability Across 600+ Locations in India
Compare Schwing Stetter SP 1807 Vs Schwing Stetter SP 4800 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
