Contact Us



    Chat with us

    XCMG XE520C VS Volvo EC480D Excavator

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights XCMG XE520CVolvo EC480D
    XCMG XE520C VS Volvo EC480D Excavator
    XCMG XE520C Large (25-50 Ton)
    XCMG XE520C

    ₹1.25 - 1.35 crore

    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo EC480D

    ₹1.8 - 2.3 Crore

    Particulars XCMG XE520C Volvo EC480D

    Volvo EC480D vs XCMG XE520C: Which One to Buy?

    Both are large excavators built for the biggest earthmoving and mining jobs. The Volvo EC480D comes with GPS fitted as standard and is built with fuel-saving in mind, which matters when you run several machines on one site. The XCMG XE520C has a more powerful engine and a bigger fuel tank, so it can dig longer and harder between fills.

    If you want machine tracking out of the box and lower fuel cost across a fleet, the Volvo is the steadier choice. If your project needs raw power and long runtime on remote sites, the XCMG's bigger tank and engine pull ahead. Check the full Volvo excavator range, the XCMG excavator range, our excavator uses guide, or all excavators.

    Volvo EC480D Large Excavator

    Pros:

    • Eco-friendly with high-load capacity for large-scale projects
    • Substantial operating weight range (47,300 - 53,100 Kg) providing stability and lifting capability
    • Strong bucket digging force of 230 kN for tough digging conditions
    • Inclusive of GPS and AC cabin standard features for enhanced operation
    • Long boom and arm lengths (7000 mm and 3350 mm respectively) for extended reach

    Cons:

    • Less powerful engine compared to XCMG XE520C (367 HP vs. 380.6 HP)
    • Bucket capacity is slightly lower at maximum compared to XCMG XE520C (3.8 m³ vs. 3.1 m³)
    • No information provided on travel speed at low gear

    XCMG XE520C Large Excavator

    Pros:

    • More powerful engine than the Volvo EC480D (380.6 HP)
    • Slightly higher fuel tank capacity (725 L) for extended operation times
    • GPS not available, which might be a con for some users
    • Higher torque at lower rpm indicating strong low-end power
    • Greater bucket capacity option up to 3.1 m³

    Cons:

    • Lower bucket digging force not provided
    • Slower high-travel speed (5.4 Km/h) compared to Volvo EC480D (5.1 Km/h)
    • GPS not standard, potentially less convenient for advanced tracking and navigation

    Pros:

    Cons:

    Closing Recommendation

    Both are large excavators built for heavy, large-scale earthmoving. Choose the Volvo EC480D when you want built-in GPS tracking, lower fuel use and steady stability on big projects. Choose the XCMG XE520C when your work needs more raw engine power and a bigger tank for long runtime on remote sites. So match the machine to your work: Volvo EC480D for tracked, fuel-conscious fleets, XCMG XE520C for maximum power on remote, heavy-duty jobs.

    XCMG XE520C Vs Volvo EC480D Excavator Price, Technical Specifications & Features

    Brand XCMG Excavator Volvo Excavator
    Type Large (25-50 Ton) Large (25-50 Ton)
    Operating Cost ₹1.25 - 1.35 crore ₹1.8 - 2.3 Crore
    Price ₹1.25 - 1.35 crore ₹1.8 - 2.3 Crore
    Weight 50000 Kg 47300 Kg
    Bucket 2.3 - 3.1 m³ 1.77 - 3.8 m³
    Max Digging Depth 6530 mm 7720 mm
    Engine Cummins 380.6 HP Volvo 367 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6670 mm 7000 mm
    Quick Overview:

    The XCMG XE520C is a large 50-ton mining excavator designed for heavy mining, quarrying, and large infrastructure digging that demands maximum power and high material throughput. It features a Cummins QSM-11 turbocharged diesel engine that produces 380.6 HP (283.8 kW) at 2,000 rpm, creating strong torque and reliable continuous performance even under heavy loads. Weighing around 50,000 kg, the XE520C provides a stable platform for deep excavation and large-volume material handling on the most demanding sites. Its bucket capacity ranges from 2.3 to 3.1 m³, allowing for fast handling of soil, rock, and bulk material with high efficiency per cycle. With a maximum digging depth of around 6,530 mm, this XCMG excavator is ideal for deep bench excavation, open-pit mining, and large trench work. Dual variable-displacement piston pumps rated at 2 × 360 L/min offer smooth multi-function control and adaptive performance across all tasks. A large 725 L fuel tank supports extended on-site operation without frequent refueling. The ROPS/FOPS-certified air-conditioned cabin provides 360° visibility and an integrated instrument cluster for operator comfort, safety, and full machine awareness. The XCMG XE520C price in India ranges from Rs. 1.25 to 1.35 crore. This excavator from XCMG Construction Equipment is the preferred machine for open-pit mining companies, large quarry operators, and major infrastructure contractors who need top digging capacity, structural strength, and reliable operation around the clock.

    The Volvo EC480D is a 48-ton hydraulic excavator built for mining, overburden removal, and large infrastructure projects. It is powered by a 367 HP Volvo D13F engine designed to deliver high torque during demanding heavy-duty cycles. Weighing between 47,300 and 53,100 kg, the machine stays grounded across extreme terrain and high-load conditions. Its bucket capacity ranges from 1.77 to 3.8 m³, allowing it to manage large-scale bulk excavation and high-volume material movement. With a maximum digging depth of up to 9,170 mm, this Volvo excavator can easily reach deep into hard ground and rock. High breakout force of up to 230 to 250 kN ensures strong digging in tough conditions. Advanced hydraulics provide faster cycle times and smoother operations throughout every shift. It is built for maximum output per shift with lower costs per tonne across all applications. As one of the leading excavator models from Volvo, it is engineered to handle demanding mining and quarry operations efficiently. A massive fuel tank allows for long continuous shifts without refueling interruptions on demanding mining sites. It is designed for extreme durability in mining and quarry environments over extended operational periods. The Volvo 480 excavator price in India ranges from Rs. 1.8 to Rs. 2.3 crore. Backed by the proven Volvo product range, this model from Volvo Construction Equipment is an ideal choice for mining contractors and large quarry operators aiming for maximum output at lower costs per tonne.

    Agency review

    Planning to buy the XCMG XE520C Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the Volvo EC480D Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Volvo EC480D vs XCMG XE520C: Which One to Buy?

    Both are large excavators built for the biggest earthmoving and mining jobs. The Volvo EC480D comes with GPS fitted as standard and is built with fuel-saving in mind, which matters when you run several machines on one site. The XCMG XE520C has a more powerful engine and a bigger fuel tank, so it can dig longer and harder between fills.

    If you want machine tracking out of the box and lower fuel cost across a fleet, the Volvo is the steadier choice. If your project needs raw power and long runtime on remote sites, the XCMG's bigger tank and engine pull ahead. Check the full Volvo excavator range, the XCMG excavator range, our excavator uses guide, or all excavators.

    Volvo EC480D Large Excavator

    Pros:

    • Eco-friendly with high-load capacity for large-scale projects
    • Substantial operating weight range (47,300 - 53,100 Kg) providing stability and lifting capability
    • Strong bucket digging force of 230 kN for tough digging conditions
    • Inclusive of GPS and AC cabin standard features for enhanced operation
    • Long boom and arm lengths (7000 mm and 3350 mm respectively) for extended reach

    Cons:

    • Less powerful engine compared to XCMG XE520C (367 HP vs. 380.6 HP)
    • Bucket capacity is slightly lower at maximum compared to XCMG XE520C (3.8 m³ vs. 3.1 m³)
    • No information provided on travel speed at low gear

    XCMG XE520C Large Excavator

    Pros:

    • More powerful engine than the Volvo EC480D (380.6 HP)
    • Slightly higher fuel tank capacity (725 L) for extended operation times
    • GPS not available, which might be a con for some users
    • Higher torque at lower rpm indicating strong low-end power
    • Greater bucket capacity option up to 3.1 m³

    Cons:

    • Lower bucket digging force not provided
    • Slower high-travel speed (5.4 Km/h) compared to Volvo EC480D (5.1 Km/h)
    • GPS not standard, potentially less convenient for advanced tracking and navigation

    Pros:

    Cons:

    Closing Recommendation

    Both are large excavators built for heavy, large-scale earthmoving. Choose the Volvo EC480D when you want built-in GPS tracking, lower fuel use and steady stability on big projects. Choose the XCMG XE520C when your work needs more raw engine power and a bigger tank for long runtime on remote sites. So match the machine to your work: Volvo EC480D for tracked, fuel-conscious fleets, XCMG XE520C for maximum power on remote, heavy-duty jobs.

    XCMG XE520C Vs Volvo EC480D Excavator Price, Technical Specifications & Features

    XCMG XE520C Volvo EC480D
    Brand
    XCMG Excavator Volvo Excavator
    Type
    Large (25-50 Ton) Large (25-50 Ton)
    Price
    ₹1.25 - 1.35 crore ₹1.8 - 2.3 Crore
    Weight
    50000 Kg 47300 Kg
    Bucket
    2.3 - 3.1 m³ 1.77 - 3.8 m³
    Max Digging Depth
    6530 mm 7720 mm
    Engine
    Cummins 380.6 HP Volvo 367 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6670 mm 7000 mm
    Quick Overview:

    The XCMG XE520C is a large 50-ton mining excavator designed for heavy mining, quarrying, and large infrastructure digging that demands maximum power and high material throughput. It features a Cummins QSM-11 turbocharged diesel engine that produces 380.6 HP (283.8 kW) at 2,000 rpm, creating strong torque and reliable continuous performance even under heavy loads. Weighing around 50,000 kg, the XE520C provides a stable platform for deep excavation and large-volume material handling on the most demanding sites. Its bucket capacity ranges from 2.3 to 3.1 m³, allowing for fast handling of soil, rock, and bulk material with high efficiency per cycle. With a maximum digging depth of around 6,530 mm, this XCMG excavator is ideal for deep bench excavation, open-pit mining, and large trench work. Dual variable-displacement piston pumps rated at 2 × 360 L/min offer smooth multi-function control and adaptive performance across all tasks. A large 725 L fuel tank supports extended on-site operation without frequent refueling. The ROPS/FOPS-certified air-conditioned cabin provides 360° visibility and an integrated instrument cluster for operator comfort, safety, and full machine awareness. The XCMG XE520C price in India ranges from Rs. 1.25 to 1.35 crore. This excavator from XCMG Construction Equipment is the preferred machine for open-pit mining companies, large quarry operators, and major infrastructure contractors who need top digging capacity, structural strength, and reliable operation around the clock.

    The Volvo EC480D is a 48-ton hydraulic excavator built for mining, overburden removal, and large infrastructure projects. It is powered by a 367 HP Volvo D13F engine designed to deliver high torque during demanding heavy-duty cycles. Weighing between 47,300 and 53,100 kg, the machine stays grounded across extreme terrain and high-load conditions. Its bucket capacity ranges from 1.77 to 3.8 m³, allowing it to manage large-scale bulk excavation and high-volume material movement. With a maximum digging depth of up to 9,170 mm, this Volvo excavator can easily reach deep into hard ground and rock. High breakout force of up to 230 to 250 kN ensures strong digging in tough conditions. Advanced hydraulics provide faster cycle times and smoother operations throughout every shift. It is built for maximum output per shift with lower costs per tonne across all applications. As one of the leading excavator models from Volvo, it is engineered to handle demanding mining and quarry operations efficiently. A massive fuel tank allows for long continuous shifts without refueling interruptions on demanding mining sites. It is designed for extreme durability in mining and quarry environments over extended operational periods. The Volvo 480 excavator price in India ranges from Rs. 1.8 to Rs. 2.3 crore. Backed by the proven Volvo product range, this model from Volvo Construction Equipment is an ideal choice for mining contractors and large quarry operators aiming for maximum output at lower costs per tonne.

    XCMG XE520C Vs Volvo EC480D Excavator Key Highlights

    XCMG XE520C Volvo EC480D
    Engine Make Cummins , QSM 11 Volvo D13F
    Fuel Tank 725 L 685 L
    Engine Displacment 11 L 12.8 L
    Under Carriage 5353 mm 5370 mm
    Hydraulic System 560 L 52 L
    Arm 2400 mm 3350 mm
    Max Digging Reach NA 12040 mm
    Fuel Consumption NA NA
    Overall Width 3582 mm 3440 mm
    Overall Length 11830 mm 12140 mm
    Bucket Digging Force NA 230 kN
    Tailswing Radius 3800 mm 3800 mm
    Track Shoe Width 600 mm 700 mm
    AC Cabin Standard Standard
    GPS Not Available Standard

    XCMG XE520C Vs Volvo EC480D Excavator Key Highlights

    XCMG XE520C Volvo EC480D
    Engine Make
    Cummins , QSM 11 Volvo D13F
    Fuel Tank
    725 L 685 L
    Engine Displacment
    11 L 12.8 L
    Under Carriage
    5353 mm 5370 mm
    Hydraulic System
    560 L 52 L
    Arm
    2400 mm 3350 mm
    Max Digging Reach
    NA 12040 mm
    Fuel Consumption
    NA NA
    Overall Width
    3582 mm 3440 mm
    Overall Length
    11830 mm 12140 mm
    Bucket Digging Force
    NA 230 kN
    Tailswing Radius
    3800 mm 3800 mm
    Track Shoe Width
    600 mm 700 mm
    AC Cabin
    Standard Standard
    GPS
    Not Available Standard

    XCMG XE520C Vs Volvo EC480D Excavator Specifications

    Engine

    3671 3651
    Model Cummins 380.6 HP Volvo 367 HP
    Fuel Diesel Diesel
    Type 6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinders
    Rated Engine Power 380.6 HP (283.8 kW) @ 2000 rpm 367 HP (270 kW) @ 1700 rpm
    Maximum Torque 1898 Nm @ 1300 rpm 1800 Nm @ 1400 rpm
    Piston Displacement 11 L 12.8 L
    Alternator NA 28 / 80A
    Battery 12 V x 2 2 x 12V , 200 Ah
    Starting Motor NA 24V

    Undercarriage

    24V 24V
    No of Top rollers 2 2 x 2
    No of bottom rollers 9 2 x 9
    Track Shoes (Each Side) 49 2 x 50 , 2 x 52
    Track Guard NA NA
    Track Shoe width 600 mm 700 mm
    Ground bearing pressure NA 70.0 kPa
    Track Tensioning Grease Grease
    Gradeability 35° 70% (35°)
    Travel Speed-Low NA 3.1 Km/h
    Travel Speed-High 5.4 Km/h 5.1 Km/h
    Max Tracking Force 338 kN 330 kN

    Hydraulic System

    XCMG XE520C Volvo EC480D
    Hydraulic pump 2 Variable Displacement Piston Pumps 2 x variable displacement axial piston pumps
    Maximum Flow 2 x 360 L/min 2 x 358 L/min
    Pilot Pump 1 Gear Pump Gear Pump
    Implement Circuit 34.3 MPa / 37 MPa 32.4/35.3 MPa
    Swing Circuit 31 MPa 25.8 MPa
    Travel circuit 34.3 MPa 32.4 MPa
    Pilot circuit 3.9 MPa 3.9 MPa

    Hydraulic Motors

    XCMG XE520C Volvo EC480D
    Travel NA Variable displacement axial piston motor with mechanical brake
    Swing NA Fixed displacement axial piston motor with mechanical brake

    Service Capacities

    XCMG XE520C Volvo EC480D
    Fuel tank 725 L 685 L
    Engine Coolant 50 L 60 L
    Engine oil 40 L 42 L
    Hydraulic system 560 L 52 L
    Hydraulic tank 430 L 270 L

    Machine Weight

    XCMG XE520C Volvo EC480D
    Operating Weight 50000 Kg 47300 Kg

    Working Range

    XCMG XE520C Volvo EC480D
    Boom length 6670 mm 7000 mm
    Arm length 2400 mm 3350 mm
    Max Digging Reach NA 12040 mm
    Max Digging Reach on ground NA 11810 mm
    Max digging depth 6530 mm 7720 mm
    Max digging height 9480 mm 11020 mm
    Max Dump Height 6800 mm 7640 mm
    Max vertical wallcut depth 3840 mm 7110 mm
    Min swing radius 4550 mm 5090 mm
    Max Height at Min Swing radius NA NA
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force NA 230 kN
    Arm Digging Force NA 196 kN
    Swing Speed NA 8.8 rpm

    Dozer Blade

    XCMG XE520C Volvo EC480D
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    XCMG XE520C Volvo EC480D
    Bucket Capacity 2.3 - 3.1 m³ 1.77 - 3.8 m³

    Static Dimensions

    XCMG XE520C Volvo EC480D
    Overall Length 11830 mm 12140 mm
    Overall width 3582 mm 3440 mm
    Overall Height 3770 mm 3650 mm
    Overall Height of Cab NA 3257 mm
    Upper Width 3095 mm 2990 mm
    Track Lengh on Ground 4292 mm 4370 mm
    Undercarriage overall length 5353 mm 5370 mm
    Tailswing radius 3800 mm 3800 mm
    Min Ground clearance 519 mm 550 mm
    Track gauge 2750 mm 2740 mm
    Width over tracks 3582 mm NA
    Track Height 1198 mm NA
    Counterweight Clearance 1324 mm 1275 mm
    Track Shoe Width 600 mm 700 mm

    XCMG XE520C Vs Volvo EC480D Excavator Specifications

    Engine

    XCMG XE520C Volvo EC480D
    Model
    Cummins 380.6 HP Volvo 367 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinders
    Rated Engine Power
    380.6 HP (283.8 kW) @ 2000 rpm 367 HP (270 kW) @ 1700 rpm
    Maximum Torque
    1898 Nm @ 1300 rpm 1800 Nm @ 1400 rpm
    Piston Displacement
    11 L 12.8 L
    Alternator
    NA 28 / 80A
    Battery
    12 V x 2 2 x 12V , 200 Ah
    Starting Motor
    NA 24V

    Undercarriage

    XCMG XE520C Volvo EC480D
    No of Top rollers
    2 2 x 2
    No of bottom rollers
    9 2 x 9
    Track Shoes (Each Side)
    49 2 x 50 , 2 x 52
    Track Guard
    NA NA
    Track Shoe width
    600 mm 700 mm
    Ground bearing pressure
    NA 70.0 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    35° 70% (35°)
    Travel Speed-Low
    NA 3.1 Km/h
    Travel Speed-High
    5.4 Km/h 5.1 Km/h
    Max Tracking Force
    338 kN 330 kN

    Hydraulic Motors

    XCMG XE520C Volvo EC480D
    Hydraulic pump
    2 Variable Displacement Piston Pumps 2 x variable displacement axial piston pumps
    Maximum Flow
    2 x 360 L/min 2 x 358 L/min
    Pilot Pump
    1 Gear Pump Gear Pump
    Implement Circuit
    34.3 MPa / 37 MPa 32.4/35.3 MPa
    Swing Circuit
    31 MPa 25.8 MPa
    Travel circuit
    34.3 MPa 32.4 MPa
    Pilot circuit
    3.9 MPa 3.9 MPa

    Service Capacities

    XCMG XE520C Volvo EC480D
    Fuel tank
    725 L 685 L
    Engine Coolant
    50 L 60 L
    Engine oil
    40 L 42 L
    Hydraulic system
    560 L 52 L
    Hydraulic tank
    430 L 270 L

    Machine Weight

    XCMG XE520C Volvo EC480D
    Operating Weight
    50000 Kg 47300 Kg

    Working Range

    XCMG XE520C Volvo EC480D
    Boom length
    6670 mm 7000 mm
    Arm length
    2400 mm 3350 mm
    Max Digging Reach
    NA 12040 mm
    Max Digging Reach on ground
    NA 11810 mm
    Max digging depth
    6530 mm 7720 mm
    Max digging height
    9480 mm 11020 mm
    Max Dump Height
    6800 mm 7640 mm
    Max vertical wallcut depth
    3840 mm 7110 mm
    Min swing radius
    4550 mm 5090 mm
    Max Height at Min Swing radius
    NA NA
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    NA 230 kN
    Arm Digging Force
    NA 196 kN
    Swing Speed
    NA 8.8 rpm

    Dozer Blade

    XCMG XE520C Volvo EC480D
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    XCMG XE520C Volvo EC480D
    Bucket Capacity
    2.3 - 3.1 m³ 1.77 - 3.8 m³

    Static Dimensions

    XCMG XE520C Volvo EC480D
    Overall Length
    11830 mm 12140 mm
    Overall width
    3582 mm 3440 mm
    Overall Height
    3770 mm 3650 mm
    Overall Height of Cab
    NA 3257 mm
    Upper Width
    3095 mm 2990 mm
    Track Lengh on Ground
    4292 mm 4370 mm
    Undercarriage overall length
    5353 mm 5370 mm
    Tailswing radius
    3800 mm 3800 mm
    Min Ground clearance
    519 mm 550 mm
    Track gauge
    2750 mm 2740 mm
    Width over tracks
    3582 mm NA
    Track Height
    1198 mm NA
    Counterweight Clearence
    1324 mm 1275 mm
    Track Shoe Width
    600 mm 700 mm

    Popular Comparisons with XCMG XE520C

    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    VS
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Popular Comparisons with Volvo EC480D

    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    LiuGong Liugong 939E HD
    4.5 rating
    ₹1.00 - 1.10 crore
    38400 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    VS
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg

    Frequently Asked Question

    Ans.

    The XCMG XE520C has more engine power. Its engine output is higher than the Volvo EC480D's, which helps when digging in very hard ground or moving large amounts of material fast. The Volvo is still strong but is tuned more for steady, fuel-saving work.

    Ans.

    The XCMG XE520C runs longer without refuelling. It carries more fuel than the Volvo EC480D, which is useful on remote mining or quarry sites where a fuel truck cannot reach easily every day.

    Ans.

    The Volvo EC480D comes with GPS tracking built in as standard. This helps you watch machine location and hours without buying a separate tracker. The XCMG XE520C does not include GPS as standard, so you would need to fit one yourself if tracking matters to you.

    Ans.

    The Volvo EC480D is more stable for very large jobs. It has a wide operating weight range and a strong bucket digging force, which keeps it steady on big, tough sites. The XCMG XE520C is powerful too, but the Volvo's build favours stability under heavy strain.

    Ans.

    The Volvo EC480D is better for eco-conscious or government projects. It is built with lower emissions and fuel-saving in mind, which many public and EPC tenders now ask for. The XCMG XE520C focuses more on raw power than on emissions.

    XCMG XE520C Vs Volvo EC480D - Compare Price & Availability Across 600+ Locations in India

    Compare XCMG XE520C Vs Volvo EC480D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare