Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    XCMG XE520C VS SANY SY500C-10HD Excavator

    XCMG XE520C
    ₹1.25 - 1.35 crore*

    XCMG XE520C

    • Weight

      50000 Kg

    • Bucket

      2.3 - 3.1 m³

    • Dig. Depth

      6530 mm

    • Engine

      Cummins 380.6 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      6670 mm
    Large (25-50 Ton)
    SANY SY500C-10HD
    ₹1.40 - 1.50 crore*

    SANY SY500C-10HD

    • Weight

      49500 Kg

    • Bucket

      3.1 m³

    • Dig. Depth

      6600 mm

    • Engine

      Isuzu 403 HP

    • Warranty

      1 Yr. / 2000 hr.

    • Boom

      6550 mm
    Large (25-50 Ton)

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights XCMG XE520CSANY SY500C-10HD
    XCMG XE520C VS SANY SY500C-10HD Excavator
    XCMG XE520C Large (25-50 Ton)
    XCMG XE520C

    ₹1.25 - 1.35 crore

    SANY SY500C-10HD Large (25-50 Ton)
    SANY SY500C-10HD

    ₹1.40 - 1.50 crore

    Particulars XCMG XE520C SANY SY500C-10HD

    Sany SY500C-10HD vs XCMG XE520C: Which One to Buy?

    Both are large excavators built for mining and quarry-scale work, but they differ in refuelling range and hydraulics detail. The Sany SY500C-10HD comes with a standard AC cabin, GPS, higher gradeability and greater digging depth, useful for steep quarry faces. The XCMG XE520C carries a much bigger fuel tank and lists its hydraulic system capacity clearly, useful for remote sites and attachment-heavy work.

    If you run a fleet on steep quarry benches and want built-in tracking, the Sany is the easier fit. If your site is far from fuel supply and you want a machine that can run long stretches between refuelling, the XCMG suits that better, even without built-in GPS. See the full Sany excavator range, the XCMG excavator range, all excavators, or read our excavator uses guide.

    Sany SY500C-10HD Excavator

    Pros:

    • Powerful Isuzu 403 HP engine with high torque of 1950 Nm
    • Large bucket capacity of 3.1 m³ suitable for heavy-duty tasks
    • Standard AC cabin and GPS for operator comfort and convenience
    • Higher gradeability at 70% allows for better operation on slopes
    • Significant digging depth capacity at 6600 mm

    Cons:

    • Higher fuel consumption at 15 L/hour
    • Less information available regarding travel speeds and hydraulic pump details

    XCMG XE520C Excavator

    Pros:

    • Slightly more powerful Cummins engine rated at 380.6 HP
    • Larger fuel tank at 725 L may offer extended operating time between refuels
    • More detailed information about hydraulic system at 560 L capacity

    Cons:

    • Lacks built-in GPS system
    • Arm digging force, swing speed, and other key specifications are not provided
    • Lower gradeability at 35° could limit slope performance

    Pros:

    Cons:

    Closing Recommendation

    Pick the Sany SY500C-10HD when you need built-in GPS, better slope climbing and deeper digging reach, even if it uses more fuel per hour. Pick the XCMG XE520C when your site is remote and you want a bigger fuel tank for longer runs between refuelling, and you don't mind adding GPS tracking separately. So match the machine to your work: Sany SY500C-10HD for steep, deep quarry digging, XCMG XE520C for remote sites needing long fuel range.

    XCMG XE520C Vs SANY SY500C-10HD Excavator Price, Technical Specifications & Features

    Brand XCMG Excavator SANY Excavator
    Type Large (25-50 Ton) Large (25-50 Ton)
    Operating Cost ₹1.25 - 1.35 crore ₹1.40 - 1.50 crore
    Price ₹1.25 - 1.35 crore ₹1.40 - 1.50 crore
    Weight 50000 Kg 49500 Kg
    Bucket 2.3 - 3.1 m³ 3.1 m³
    Max Digging Depth 6530 mm 6600 mm
    Engine Cummins 380.6 HP Isuzu 403 HP
    Warranty 1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom 6670 mm 6550 mm
    Quick Overview:

    The XCMG XE520C is a large 50-ton mining excavator designed for heavy mining, quarrying, and large infrastructure digging that demands maximum power and high material throughput. It features a Cummins QSM-11 turbocharged diesel engine that produces 380.6 HP (283.8 kW) at 2,000 rpm, creating strong torque and reliable continuous performance even under heavy loads. Weighing around 50,000 kg, the XE520C provides a stable platform for deep excavation and large-volume material handling on the most demanding sites. Its bucket capacity ranges from 2.3 to 3.1 m³, allowing for fast handling of soil, rock, and bulk material with high efficiency per cycle. With a maximum digging depth of around 6,530 mm, this XCMG excavator is ideal for deep bench excavation, open-pit mining, and large trench work. Dual variable-displacement piston pumps rated at 2 × 360 L/min offer smooth multi-function control and adaptive performance across all tasks. A large 725 L fuel tank supports extended on-site operation without frequent refueling. The ROPS/FOPS-certified air-conditioned cabin provides 360° visibility and an integrated instrument cluster for operator comfort, safety, and full machine awareness. The XCMG XE520C price in India ranges from Rs. 1.25 to 1.35 crore. This excavator from XCMG Construction Equipment is the preferred machine for open-pit mining companies, large quarry operators, and major infrastructure contractors who need top digging capacity, structural strength, and reliable operation around the clock.

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.
    Agency review

    Planning to buy the XCMG XE520C Mining Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Planning to buy the SANY SY500C-10HD Excavator in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.

    Sany SY500C-10HD vs XCMG XE520C: Which One to Buy?

    Both are large excavators built for mining and quarry-scale work, but they differ in refuelling range and hydraulics detail. The Sany SY500C-10HD comes with a standard AC cabin, GPS, higher gradeability and greater digging depth, useful for steep quarry faces. The XCMG XE520C carries a much bigger fuel tank and lists its hydraulic system capacity clearly, useful for remote sites and attachment-heavy work.

    If you run a fleet on steep quarry benches and want built-in tracking, the Sany is the easier fit. If your site is far from fuel supply and you want a machine that can run long stretches between refuelling, the XCMG suits that better, even without built-in GPS. See the full Sany excavator range, the XCMG excavator range, all excavators, or read our excavator uses guide.

    Sany SY500C-10HD Excavator

    Pros:

    • Powerful Isuzu 403 HP engine with high torque of 1950 Nm
    • Large bucket capacity of 3.1 m³ suitable for heavy-duty tasks
    • Standard AC cabin and GPS for operator comfort and convenience
    • Higher gradeability at 70% allows for better operation on slopes
    • Significant digging depth capacity at 6600 mm

    Cons:

    • Higher fuel consumption at 15 L/hour
    • Less information available regarding travel speeds and hydraulic pump details

    XCMG XE520C Excavator

    Pros:

    • Slightly more powerful Cummins engine rated at 380.6 HP
    • Larger fuel tank at 725 L may offer extended operating time between refuels
    • More detailed information about hydraulic system at 560 L capacity

    Cons:

    • Lacks built-in GPS system
    • Arm digging force, swing speed, and other key specifications are not provided
    • Lower gradeability at 35° could limit slope performance

    Pros:

    Cons:

    Closing Recommendation

    Pick the Sany SY500C-10HD when you need built-in GPS, better slope climbing and deeper digging reach, even if it uses more fuel per hour. Pick the XCMG XE520C when your site is remote and you want a bigger fuel tank for longer runs between refuelling, and you don't mind adding GPS tracking separately. So match the machine to your work: Sany SY500C-10HD for steep, deep quarry digging, XCMG XE520C for remote sites needing long fuel range.

    XCMG XE520C Vs SANY SY500C-10HD Excavator Price, Technical Specifications & Features

    XCMG XE520C SANY SY500C-10HD
    Brand
    XCMG Excavator SANY Excavator
    Type
    Large (25-50 Ton) Large (25-50 Ton)
    Price
    ₹1.25 - 1.35 crore ₹1.40 - 1.50 crore
    Weight
    50000 Kg 49500 Kg
    Bucket
    2.3 - 3.1 m³ 3.1 m³
    Max Digging Depth
    6530 mm 6600 mm
    Engine
    Cummins 380.6 HP Isuzu 403 HP
    Warranty
    1 Yr. / 2000 hr. 1 Yr. / 2000 hr.
    Boom
    6670 mm 6550 mm
    Quick Overview:

    The XCMG XE520C is a large 50-ton mining excavator designed for heavy mining, quarrying, and large infrastructure digging that demands maximum power and high material throughput. It features a Cummins QSM-11 turbocharged diesel engine that produces 380.6 HP (283.8 kW) at 2,000 rpm, creating strong torque and reliable continuous performance even under heavy loads. Weighing around 50,000 kg, the XE520C provides a stable platform for deep excavation and large-volume material handling on the most demanding sites. Its bucket capacity ranges from 2.3 to 3.1 m³, allowing for fast handling of soil, rock, and bulk material with high efficiency per cycle. With a maximum digging depth of around 6,530 mm, this XCMG excavator is ideal for deep bench excavation, open-pit mining, and large trench work. Dual variable-displacement piston pumps rated at 2 × 360 L/min offer smooth multi-function control and adaptive performance across all tasks. A large 725 L fuel tank supports extended on-site operation without frequent refueling. The ROPS/FOPS-certified air-conditioned cabin provides 360° visibility and an integrated instrument cluster for operator comfort, safety, and full machine awareness. The XCMG XE520C price in India ranges from Rs. 1.25 to 1.35 crore. This excavator from XCMG Construction Equipment is the preferred machine for open-pit mining companies, large quarry operators, and major infrastructure contractors who need top digging capacity, structural strength, and reliable operation around the clock.

    The SANY SY500C-10HD is a heavy-duty 50-ton class mining excavator for large-scale earthmoving, quarry operations, and major infrastructure projects needing high output. Its Isuzu engine produces 403 HP, supporting continuous heavy-load operations with stable fuel consumption during long cycles. With an operating weight of about 49,500 kg, it provides excellent ground stability during tough tasks. Compared to smaller excavators, the SY500C-10HD from SANY Construction Equipment offers much higher bucket capacity and stronger digging force for faster material handling. It reaches a digging depth of around 6,600 mm, making it appropriate for deep excavation and bulk material tasks. A 3.1 m³ bucket boosts productivity per cycle, especially in mining and large excavation projects. Advanced hydraulic systems ensure smooth control during multi-function tasks under load. Reinforced structural components improve durability in harsh conditions. High output per shift helps contractors enhance efficiency and lower costs per tonne moved. The SANY SY500C-10HD excavator price in India ranges from Rs. 1.40 to 1.50 crore. This SANY excavator is suitable for mining contractors and major infrastructure companies dealing with high-volume and heavy-duty excavation projects.

    XCMG XE520C Vs SANY SY500C-10HD Excavator Key Highlights

    XCMG XE520C SANY SY500C-10HD
    Engine Make Cummins , QSM 11 Isuzu 6WG1X
    Fuel Tank 725 L 680 L
    Engine Displacment 11 L 15.68 L
    Under Carriage 5353 mm 5440 mm
    Hydraulic System 560 L NA
    Arm 2400 mm 2500 mm
    Max Digging Reach NA 10850 mm
    Fuel Consumption NA 15 L/hour
    Overall Width 3582 mm 3360 mm
    Overall Length 11830 mm 11700 mm
    Bucket Digging Force NA 280 kN
    Tailswing Radius 3800 mm 3765 mm
    Track Shoe Width 600 mm 600 mm
    AC Cabin Standard Standard
    GPS Not Available Standard

    XCMG XE520C Vs SANY SY500C-10HD Excavator Key Highlights

    XCMG XE520C SANY SY500C-10HD
    Engine Make
    Cummins , QSM 11 Isuzu 6WG1X
    Fuel Tank
    725 L 680 L
    Engine Displacment
    11 L 15.68 L
    Under Carriage
    5353 mm 5440 mm
    Hydraulic System
    560 L NA
    Arm
    2400 mm 2500 mm
    Max Digging Reach
    NA 10850 mm
    Fuel Consumption
    NA 15 L/hour
    Overall Width
    3582 mm 3360 mm
    Overall Length
    11830 mm 11700 mm
    Bucket Digging Force
    NA 280 kN
    Tailswing Radius
    3800 mm 3765 mm
    Track Shoe Width
    600 mm 600 mm
    AC Cabin
    Standard Standard
    GPS
    Not Available Standard

    XCMG XE520C Vs SANY SY500C-10HD Excavator Specifications

    Engine

    3671 3682
    Model Cummins 380.6 HP Isuzu 403 HP
    Fuel Diesel Diesel
    Type 6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinder , inline , Water Cooled
    Rated Engine Power 380.6 HP (283.8 kW) @ 2000 rpm 403 HP (300 kW) @ 1800 rpm
    Maximum Torque 1898 Nm @ 1300 rpm 1950 Nm @ 1400 rpm
    Piston Displacement 11 L 15.68 L
    Alternator NA 70A
    Battery 12 V x 2 2 x 12 V
    Starting Motor NA 24 V - 7.5 kW

    Undercarriage

    24 V - 7.5 kW 24 V - 7.5 kW
    No of Top rollers 2 2
    No of bottom rollers 9 9
    Track Shoes (Each Side) 49 50
    Track Guard NA NA
    Track Shoe width 600 mm 600 mm
    Ground bearing pressure NA 87.1 kPa
    Track Tensioning Grease Grease
    Gradeability 35° 70 % (35°)
    Travel Speed-Low NA 3.1 Km/h
    Travel Speed-High 5.4 Km/h 5.4 Km/h
    Max Tracking Force 338 kN 339 kN

    Hydraulic System

    XCMG XE520C SANY SY500C-10HD
    Hydraulic pump 2 Variable Displacement Piston Pumps 2 Variable Displacement Axial Piston Pumps
    Maximum Flow 2 x 360 L/min 2 x 366 L/min
    Pilot Pump 1 Gear Pump Gear Pump
    Implement Circuit 34.3 MPa / 37 MPa 34.3 MPa
    Swing Circuit 31 MPa 26.9 MPa
    Travel circuit 34.3 MPa 31.4 MPa
    Pilot circuit 3.9 MPa 3.9 MPa

    Hydraulic Motors

    XCMG XE520C SANY SY500C-10HD
    Travel NA 2 Axial Piston Motor With Parking Brake
    Swing NA Axial Piston Motor with Swing Holding Brake

    Service Capacities

    XCMG XE520C SANY SY500C-10HD
    Fuel tank 725 L 680 L
    Engine Coolant 50 L 24 L
    Engine oil 40 L 50 L
    Hydraulic system 560 L NA
    Hydraulic tank 430 L 480 L

    Machine Weight

    XCMG XE520C SANY SY500C-10HD
    Operating Weight 50000 Kg 49500 Kg

    Working Range

    XCMG XE520C SANY SY500C-10HD
    Boom length 6670 mm 6550 mm
    Arm length 2400 mm 2500 mm
    Max Digging Reach NA 10850 mm
    Max Digging Reach on ground NA NA
    Max digging depth 6530 mm 6600 mm
    Max digging height 9480 mm 10120 mm
    Max Dump Height 6800 mm 6700 mm
    Max vertical wallcut depth 3840 mm NA
    Min swing radius 4550 mm 5130 mm
    Max Height at Min Swing radius NA 8800 mm
    Max height (above ground) NA NA
    Dig depth (below ground) NA NA
    Bucket Digging Force NA 280 kN
    Arm Digging Force NA 248 kN
    Swing Speed NA 8.0 rpm

    Dozer Blade

    XCMG XE520C SANY SY500C-10HD
    Dozer Type NA NA
    Dozer Length NA NA
    Digging depth for ground level NA NA
    Approach Angle NA NA
    Width NA NA
    Height NA NA

    Bucket

    XCMG XE520C SANY SY500C-10HD
    Bucket Capacity 2.3 - 3.1 m³ 3.1 m³

    Static Dimensions

    XCMG XE520C SANY SY500C-10HD
    Overall Length 11830 mm 11700 mm
    Overall width 3582 mm 3360 mm
    Overall Height 3770 mm 3980 mm
    Overall Height of Cab NA 3470 mm
    Upper Width 3095 mm 3290 mm
    Track Lengh on Ground 4292 mm 4415 mm
    Undercarriage overall length 5353 mm 5440 mm
    Tailswing radius 3800 mm 3765 mm
    Min Ground clearance 519 mm 560 mm
    Track gauge 2750 mm 2740 mm
    Width over tracks 3582 mm 3360 mm
    Track Height 1198 mm NA
    Counterweight Clearance 1324 mm NA
    Track Shoe Width 600 mm 600 mm

    XCMG XE520C Vs SANY SY500C-10HD Excavator Specifications

    Engine

    XCMG XE520C SANY SY500C-10HD
    Model
    Cummins 380.6 HP Isuzu 403 HP
    Fuel
    Diesel Diesel
    Type
    6 Cylinder. Turbocharged , Air to air intercooler 6 Cylinder , inline , Water Cooled
    Rated Engine Power
    380.6 HP (283.8 kW) @ 2000 rpm 403 HP (300 kW) @ 1800 rpm
    Maximum Torque
    1898 Nm @ 1300 rpm 1950 Nm @ 1400 rpm
    Piston Displacement
    11 L 15.68 L
    Alternator
    NA 70A
    Battery
    12 V x 2 2 x 12 V
    Starting Motor
    NA 24 V - 7.5 kW

    Undercarriage

    XCMG XE520C SANY SY500C-10HD
    No of Top rollers
    2 2
    No of bottom rollers
    9 9
    Track Shoes (Each Side)
    49 50
    Track Guard
    NA NA
    Track Shoe width
    600 mm 600 mm
    Ground bearing pressure
    NA 87.1 kPa
    Track Tensioning
    Grease Grease
    Gradeability
    35° 70 % (35°)
    Travel Speed-Low
    NA 3.1 Km/h
    Travel Speed-High
    5.4 Km/h 5.4 Km/h
    Max Tracking Force
    338 kN 339 kN

    Hydraulic Motors

    XCMG XE520C SANY SY500C-10HD
    Hydraulic pump
    2 Variable Displacement Piston Pumps 2 Variable Displacement Axial Piston Pumps
    Maximum Flow
    2 x 360 L/min 2 x 366 L/min
    Pilot Pump
    1 Gear Pump Gear Pump
    Implement Circuit
    34.3 MPa / 37 MPa 34.3 MPa
    Swing Circuit
    31 MPa 26.9 MPa
    Travel circuit
    34.3 MPa 31.4 MPa
    Pilot circuit
    3.9 MPa 3.9 MPa

    Service Capacities

    XCMG XE520C SANY SY500C-10HD
    Fuel tank
    725 L 680 L
    Engine Coolant
    50 L 24 L
    Engine oil
    40 L 50 L
    Hydraulic system
    560 L NA
    Hydraulic tank
    430 L 480 L

    Machine Weight

    XCMG XE520C SANY SY500C-10HD
    Operating Weight
    50000 Kg 49500 Kg

    Working Range

    XCMG XE520C SANY SY500C-10HD
    Boom length
    6670 mm 6550 mm
    Arm length
    2400 mm 2500 mm
    Max Digging Reach
    NA 10850 mm
    Max Digging Reach on ground
    NA NA
    Max digging depth
    6530 mm 6600 mm
    Max digging height
    9480 mm 10120 mm
    Max Dump Height
    6800 mm 6700 mm
    Max vertical wallcut depth
    3840 mm NA
    Min swing radius
    4550 mm 5130 mm
    Max Height at Min Swing radius
    NA 8800 mm
    Max height (above ground)
    NA NA
    Dig depth (below ground)
    NA NA
    Bucket Digging Force
    NA 280 kN
    Arm Digging Force
    NA 248 kN
    Swing Speed
    NA 8.0 rpm

    Dozer Blade

    XCMG XE520C SANY SY500C-10HD
    Dozer Type
    NA NA
    Dozer Length
    NA NA
    Digging depth for ground level
    NA NA
    Approach Angle
    NA NA
    Width
    NA NA
    Height
    NA NA

    Bucket

    XCMG XE520C SANY SY500C-10HD
    Bucket Capacity
    2.3 - 3.1 m³ 3.1 m³

    Static Dimensions

    XCMG XE520C SANY SY500C-10HD
    Overall Length
    11830 mm 11700 mm
    Overall width
    3582 mm 3360 mm
    Overall Height
    3770 mm 3980 mm
    Overall Height of Cab
    NA 3470 mm
    Upper Width
    3095 mm 3290 mm
    Track Lengh on Ground
    4292 mm 4415 mm
    Undercarriage overall length
    5353 mm 5440 mm
    Tailswing radius
    3800 mm 3765 mm
    Min Ground clearance
    519 mm 560 mm
    Track gauge
    2750 mm 2740 mm
    Width over tracks
    3582 mm 3360 mm
    Track Height
    1198 mm NA
    Counterweight Clearence
    1324 mm NA
    Track Shoe Width
    600 mm 600 mm

    Popular Comparisons with XCMG XE520C

    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    CAT Excavator 350 Price in India
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Liebherr R 945 Litronic Excavator | Desi Machines
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Tata Hitachi ZAXIS 490H Ultra mining excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Tata Hitachi ZAXIS 470H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Komatsu PC450LC-7 Large (25-50 Ton)
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Liugong 950E Large (25-50 Ton)
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Hyundai 520 Excavator
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Compare
    VS
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    CAT 345 Excavator
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg
    Compare

    Popular Comparisons with SANY SY500C-10HD

    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    CAT Excavator 350 Price in India
    Caterpillar CAT 350
    4.5 rating
    ₹2.20 - 2.60 crore
    47600 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Liebherr R 945 Litronic Excavator | Desi Machines
    Liebherr Liebherr R 945 Litronic
    4.5 rating
    Price Available Soon
    40800 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    XCMG XE520C Large (25-50 Ton)
    XCMG XCMG XE520C
    4.5 rating
    ₹1.25 - 1.35 crore
    50000 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Volvo EC480D Excavator Price, Specs & Features in India
    Volvo Volvo EC480D
    4.5 rating
    ₹1.8 - 2.3 Crore
    47300 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi ZAXIS 490H Ultra mining excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 490H Ultra
    4.5 rating
    ₹1.80 – 2.00 crore
    47400 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Tata Hitachi ZAXIS 470H Mining Excavator | Price and Specs on Desi Machines
    Tata Hitachi Tata Hitachi ZAXIS 470H
    4.5 rating
    ₹1.80 - 1.90 crore
    47100 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Komatsu PC450LC-7 Large (25-50 Ton)
    L&T Komatsu Komatsu PC450LC-7
    4.5 rating
    ₹1.5 - 1.9 Crore
    45000 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Liugong 950E Large (25-50 Ton)
    LiuGong Liugong 950E
    4.5 rating
    ₹1.10- 1.20 crore
    46500 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Kobelco SK520XDLC Large (25-50 Ton)
    Kobelco Kobelco SK520XDLC
    4.5 rating
    ₹1.5 - 1.6 crore
    50800 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    Hyundai 520 Excavator
    Hyundai Hyundai HX520L
    4.5 rating
    ₹1.60 - 1.85 crore
    50200 Kg
    Compare
    VS
    SANY SY500C-10HD Large (25-50 Ton)
    SANY SANY SY500C-10HD
    4.5 rating
    ₹1.40 - 1.50 crore
    49500 Kg
    CAT 345 Excavator
    Caterpillar CAT 345 GC
    4.5 rating
    ₹2.1 - 2.2 crore
    42200 Kg
    Compare

    Frequently Asked Question

    Ans.

    No, the XCMG XE520C does not come with built-in GPS. If tracking matters to you, ask your dealer about fitting a separate GPS unit at delivery.

    Ans.

    The XCMG XE520C can run longer between refuelling. Its fuel tank holds 725 litres, useful on remote sites with limited fuel supply. The Sany SY500C-10HD's tank size is not listed, so confirm it with your dealer if refuelling range matters to you.

    Ans.

    The XCMG XE520C has a clearly listed hydraulic system capacity of 560 litres. This helps a buyer planning to run several hydraulic attachments on the machine.

    Ans.

    The Sany SY500C-10HD digs deeper. Its maximum digging depth is 6,600 mm, useful for deep foundation or basement excavation work.

    Ans.

    The Sany SY500C-10HD suits steep quarry benches better. It has a higher gradeability rating than the XCMG XE520C, so it holds its footing more surely on steep slopes.

    XCMG XE520C Vs SANY SY500C-10HD - Compare Price & Availability Across 600+ Locations in India

    Compare XCMG XE520C Vs SANY SY500C-10HD price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare