ACE F270 vs ACE NX 360 20T: the two differ on 31 of 53 listed specs. The main differences are Engine (Ashok Leyland 130 HP vs VECV 101 HP), Operating Weight (22000 Kg vs 20400 kg), Weight (22000 kg vs 20400 kgs), Ex-Factory Price (GST incl.) (₹ 56 - 58 Lakh vs ₹ 40 - 42 Lakh). The other 22 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE F270
ACE NX 360 20T
ACE F270
VS
ACE NX 360 20T
Crane
ACE F270 vs ACE NX 360 20T: the two differ on 31 of 53 listed specs. The main differences are Engine (Ashok Leyland 130 HP vs VECV 101 HP), Operating Weight (22000 Kg vs 20400 kg), Weight (22000 kg vs 20400 kgs), Ex-Factory Price (GST incl.) (₹ 56 - 58 Lakh vs ₹ 40 - 42 Lakh). The other 22 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE F270
₹ 56 - 58 Lakh
ACE NX 360 20T
₹ 40 - 42 Lakh
Particulars
ACE F270
ACE NX 360 20T
ACE F270 vs ACE NX 360 20T: Which One to Buy?
These two ACE cranes work differently, not just at different sizes. The ACE F270 lifts up to 27 tonnes with a strong engine, built for moving heavier loads across open sites. The ACE NX 360 20T lifts up to 20 tonnes but can slew its full-360 degrees, which lets it work in restricted zones where a normal crane cannot turn freely.
If your work is mostly heavier lifting on open ground, the ACE F270's capacity and power do more per lift. If your site has tight boundaries, walls, or other structures close by, the ACE NX 360 20T's full-slew movement lets it place loads where the F270 simply cannot reach or turn. Think about your site layout first, then the tonnage. See the full ACE crane range, all cranes, or read our crane guide.
ACE F270
Pros:
Higher maximum lifting capacity of 27 tonnes compared to ACE NX 360 20T's 20 tonnes
More powerful engine with 130 HP at 2200 RPM
12 forward and 2 reverse speed synchromesh transmission
Wider application scope including bridge building and oilfield lifting
Cons:
Heavier operating weight of 22000 Kg may affect maneuverability
Lower maximum boom height of 19.3 m compared to ACE NX 360 20T's 19.2 m, only a marginal difference
Minimum turning radius is larger at 8250 mm
ACE NX 360 20T
Pros:
Full-slew movement ideal for 20-ton lifts in restricted zones
Turbo Charged Engine for efficient operation
Higher hoist speed at 40 Mtrs./Min compared to ACE F270's 35 Mtrs./Min
Smaller minimum turning radius of 7600 mm for better maneuverability in tight spaces
Boom luffing range offers -2° to +64
Cons:
Lower maximum lifting capacity of 20 tonnes
Less engine power with 101 HP at 2200 RPM
8 forward and 2 reverse speed transmission compared to ACE F270's 12-speed transmission
Slightly less maximum boom height at 19.2 m
Pros:
Cons:
Closing Recommendation
Choose by the shape of your site as much as the size of your loads. For heavier lifting tasks that need a more powerful engine, the ACE F270 is preferable, especially on open ground. For jobs in restricted spaces where the crane must turn on the spot and place loads without repositioning, the ACE NX 360 20T is more suitable. So match the machine to your work: ACE F270 for heavier lifting on open ground, ACE NX 360 20T for full-slew work in restricted zones.
ACE F270 Vs ACE NX 360 20T Crane Price, Technical Specifications & Features
The ACE F270 is a 27-ton farana pick and carry crane specifically designed for heavy-capacity industrial, petrochemical, and power sector projects across India. An Ashok Leyland diesel engine rated at 130 HP provides strong hydraulic performance for demanding lift cycles. It has a rated lifting capacity of 27 tonnes and a boom length of 19.3 metres for broad coverage. The robust multi-axle all-wheel steering improves manoeuvrability in challenging plant and site environments. The heavy-duty undercarriage and tyre configuration ensure safe load transport at high gross vehicle weight. The ACE F270 crane price in India ranges from ₹56 lakh to ₹58 lakh, based on model and delivery region. This farana pick and carry crane from ACE Construction Equipment is ideal for major EPC projects, refineries, and large crane rental operations.
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
ACE F270 vs ACE NX 360 20T: Which One to Buy?
These two ACE cranes work differently, not just at different sizes. The ACE F270 lifts up to 27 tonnes with a strong engine, built for moving heavier loads across open sites. The ACE NX 360 20T lifts up to 20 tonnes but can slew its full-360 degrees, which lets it work in restricted zones where a normal crane cannot turn freely.
If your work is mostly heavier lifting on open ground, the ACE F270's capacity and power do more per lift. If your site has tight boundaries, walls, or other structures close by, the ACE NX 360 20T's full-slew movement lets it place loads where the F270 simply cannot reach or turn. Think about your site layout first, then the tonnage. See the full ACE crane range, all cranes, or read our crane guide.
ACE F270
Pros:
Higher maximum lifting capacity of 27 tonnes compared to ACE NX 360 20T's 20 tonnes
More powerful engine with 130 HP at 2200 RPM
12 forward and 2 reverse speed synchromesh transmission
Wider application scope including bridge building and oilfield lifting
Cons:
Heavier operating weight of 22000 Kg may affect maneuverability
Lower maximum boom height of 19.3 m compared to ACE NX 360 20T's 19.2 m, only a marginal difference
Minimum turning radius is larger at 8250 mm
ACE NX 360 20T
Pros:
Full-slew movement ideal for 20-ton lifts in restricted zones
Turbo Charged Engine for efficient operation
Higher hoist speed at 40 Mtrs./Min compared to ACE F270's 35 Mtrs./Min
Smaller minimum turning radius of 7600 mm for better maneuverability in tight spaces
Boom luffing range offers -2° to +64
Cons:
Lower maximum lifting capacity of 20 tonnes
Less engine power with 101 HP at 2200 RPM
8 forward and 2 reverse speed transmission compared to ACE F270's 12-speed transmission
Slightly less maximum boom height at 19.2 m
Pros:
Cons:
Closing Recommendation
Choose by the shape of your site as much as the size of your loads. For heavier lifting tasks that need a more powerful engine, the ACE F270 is preferable, especially on open ground. For jobs in restricted spaces where the crane must turn on the spot and place loads without repositioning, the ACE NX 360 20T is more suitable. So match the machine to your work: ACE F270 for heavier lifting on open ground, ACE NX 360 20T for full-slew work in restricted zones.
ACE F270 Vs ACE NX 360 20T Crane Price, Technical Specifications & Features
The ACE F270 is a 27-ton farana pick and carry crane specifically designed for heavy-capacity industrial, petrochemical, and power sector projects across India. An Ashok Leyland diesel engine rated at 130 HP provides strong hydraulic performance for demanding lift cycles. It has a rated lifting capacity of 27 tonnes and a boom length of 19.3 metres for broad coverage. The robust multi-axle all-wheel steering improves manoeuvrability in challenging plant and site environments. The heavy-duty undercarriage and tyre configuration ensure safe load transport at high gross vehicle weight. The ACE F270 crane price in India ranges from ₹56 lakh to ₹58 lakh, based on model and delivery region. This farana pick and carry crane from ACE Construction Equipment is ideal for major EPC projects, refineries, and large crane rental operations.
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
31 differ · 22 identical
Key highlights: ACE F270 vs ACE NX 360 20T Crane
ACE F270
ACE NX 360 20T
Engine Make
Ashok Leyland H4C413022 (CEV BS-IV)
Volvo Eicher E483 CRDI (CEV Stage IV)
Articulation
40°
40°
Max. Speed
39 km/h
38 km/h
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Overall Length
NA
NA
Overall Width
2700 mm
NA
Wheelbase
4950 mm
NA
Boom Luffing Range
NA
-2° to +64°
Warranty
1 Year
1 Year
Key highlights: ACE F270 vs ACE NX 360 20T Crane
ACE F270
ACE NX 360 20T
Engine Make
Ashok Leyland H4C413022 (CEV BS-IV)
Volvo Eicher E483 CRDI (CEV Stage IV)
Articulation
40°
40°
Max. Speed
39 km/h
38 km/h
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Overall Length
NA
NA
Overall Width
2700 mm
NA
Wheelbase
4950 mm
NA
Boom Luffing Range
NA
-2° to +64°
Warranty
1 Year
1 Year
Full specifications: ACE F270 vs ACE NX 360 20T Crane
Engine
ACE F270
ACE NX 360 20T
Engine Make
Ashok Leyland H4C413022 (CEV BS-IV)
Volvo Eicher E483 CRDI (CEV Stage IV)
Engine Type
4 cylinder water cooled diesel engine with Electronic Control Unit
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
Max Power
130 HP (95 kW) @ 2200 RPM
101 HP (74 kW) @ 2200 RPM
Battery
12V; Negative earth; 100Ah
12V; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE F270
ACE NX 360 20T
Max. Lifting Capacity
27 Tonnes
20 Tonnes
Transmission & Clutch
ACE F270
ACE NX 360 20T
Drive
4 Wheel Drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 12 forward and 2 reverse speeds. Auxiliary Gear Box with 2WD-high / 4WD-low drive selector
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Steering System
ACE F270
ACE NX 360 20T
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting cylinders
Articulation
40°
40°
Turning Radius
8250 mm
7600 mm
Hoist Mechanism
ACE F270
ACE NX 360 20T
Hoist
6 Falls; 3.9 Tonnes Line Pull Winch driven by Hydraulic motor; Rope dia 13 mm fitted with self-adjusting hook block and rope tensioner
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
Hoist Speed
35 Mtrs./Min (Line Speed)
40 Mtrs./Min (Line Speed)
Brakes
ACE F270
ACE NX 360 20T
Front Wheels
Fully pneumatic brakes on front wheels
Fully pneumatic brakes on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully pneumatic brakes on rear wheels
Parking Brake
Parking brake is pneumatically operated fail safe type
Parking brake is pneumatically operated fail safe type
Service Capacity
ACE F270
ACE NX 360 20T
Engine Oil
NA
NA
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE F270
ACE NX 360 20T
Overall Length With Bucket
NA
NA
Overall Width
2700 mm
NA
Overall Height
NA
NA
Wheel Base
4950 mm
NA
Operating Weight
22000 Kg
20400 kg
Front Track
1980 mm
NA
Rear Track
1980 mm
NA
Front Tyres
12.00 x 24- 18 PR (4 Nos.)
12 x 20-18 PR (4 Nos.)
Rear Tyres
12.00 x 24- 18 PR (4 Nos.)
12 x 20-18 PR (4 Nos.)
Boom
ACE F270
ACE NX 360 20T
Telescoping
Four-part slotted boom with 2 hydraulically operated & synchronized and 4th part powered extended
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
Derricking
Through one double-acting extension cylinder
Two double-acting hydraulic cylinders with counterbalance safety valve
Boom Luffing Time
NA
NA
Boom Luffing Range
NA
-2° to +64°
Boom Height
19.3 m
19.2 m
Full specifications: ACE F270 vs ACE NX 360 20T Crane
Engine
ACE F270
ACE NX 360 20T
Engine Make
Ashok Leyland H4C413022 (CEV BS-IV)
Volvo Eicher E483 CRDI (CEV Stage IV)
Engine Type
4 cylinder water cooled diesel engine with Electronic Control Unit
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
Max Power
130 HP (95 kW) @ 2200 RPM
101 HP (74 kW) @ 2200 RPM
Battery
12V; Negative earth; 100Ah
12V; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE F270
ACE NX 360 20T
Max. Lifting Capacity
27 Tonnes
20 Tonnes
Transmission Clutch
ACE F270
ACE NX 360 20T
Drive
4 Wheel Drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 12 forward and 2 reverse speeds. Auxiliary Gear Box with 2WD-high / 4WD-low drive selector
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Steering
ACE F270
ACE NX 360 20T
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting cylinders
Articulation
40°
40°
Turning Radius
8250 mm
7600 mm
Hoist Mechanism
ACE F270
ACE NX 360 20T
Hoist
6 Falls; 3.9 Tonnes Line Pull Winch driven by Hydraulic motor; Rope dia 13 mm fitted with self-adjusting hook block and rope tensioner
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
Hoist Speed
35 Mtrs./Min (Line Speed)
40 Mtrs./Min (Line Speed)
Brakes
ACE F270
ACE NX 360 20T
Front Wheels
Fully pneumatic brakes on front wheels
Fully pneumatic brakes on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully pneumatic brakes on rear wheels
Parking Brake
Parking brake is pneumatically operated fail safe type
Parking brake is pneumatically operated fail safe type
Service Capacity
ACE F270
ACE NX 360 20T
Engine Oil
NA
NA
Fuel Tank
NA
NA
Hydraulic Tank
NA
NA
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE F270
ACE NX 360 20T
Overall Length With Bucket
NA
NA
Overall Width
2700 mm
NA
Overall Height
NA
NA
Wheel Base
4950 mm
NA
Operating Weight
22000 Kg
20400 kg
Front Track
1980 mm
NA
Rear Track
1980 mm
NA
Front Tyres
12.00 x 24- 18 PR (4 Nos.)
12 x 20-18 PR (4 Nos.)
Rear Tyres
12.00 x 24- 18 PR (4 Nos.)
12 x 20-18 PR (4 Nos.)
Boom
ACE F270
ACE NX 360 20T
Telescoping
Four-part slotted boom with 2 hydraulically operated & synchronized and 4th part powered extended
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
Derricking
Through one double-acting extension cylinder
Two double-acting hydraulic cylinders with counterbalance safety valve
Questions buyers ask about the ACE F270 vs ACE NX 360 20T
Ans.
Full-slew means the crane's upper body can turn a complete circle without moving the whole machine. This lets it lift and place loads all around itself, which is useful in restricted zones where there is no room to reposition the crane.
Ans.
The ACE F270 lifts more, with a higher rated capacity than the ACE NX 360 20T. It suits jobs that need to move heavier loads on open ground.
Ans.
The ACE NX 360 20T hoists loads a little faster, with a higher line speed than the ACE F270. On jobs with frequent lifts, this saves time over a working day.
Ans.
The ACE NX 360 20T turns in a tighter space, with a smaller turning radius than the ACE F270. Together with its full-slew ability, this makes it the better choice for confined sites.
Ans.
The ACE F270 has more engine power. This helps it carry and move its higher rated capacity, especially on rough or uneven ground.
ACE F270 Vs ACE NX 360 20T - Compare Price & Availability Across 600+ Locations in India
Compare ACE F270 Vs ACE NX 360 20T price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
