ACE NX 360 15T vs Escorts HYDRA 13: the two differ on 45 of 53 listed specs. The main differences are Engine (Tata 76 HP vs Simpson 48 HP), Operating Weight (18300 kg vs 11000 kg), Fuel Tank (NA vs 45 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE NX 360 15T
Escorts HYDRA 13
ACE NX 360 15T
VS
Escorts HYDRA 13
Crane
ACE NX 360 15T vs Escorts HYDRA 13: the two differ on 45 of 53 listed specs. The main differences are Engine (Tata 76 HP vs Simpson 48 HP), Operating Weight (18300 kg vs 11000 kg), Fuel Tank (NA vs 45 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE NX 360 15T
₹ 34 - 38 Lakh
Escorts HYDRA 13
₹ 18 - 20 Lakh
Particulars
ACE NX 360 15T
Escorts HYDRA 13
ACE NX 360 15T vs Escorts HYDRA 13: Which Crane Should You Buy?
The ACE NX 360 15T can rotate a full 360 degrees, which is a real advantage in a tight modular assembly area where you need to lift and swing in more than one direction without repositioning the whole machine. The Escorts HYDRA 13 answers back with a creep speed setting for very slow, precise positioning, plus disc brakes on the rear wheels for better stopping control.
If your job involves lifting and rotating around a fixed point, such as assembling modular units or placing panels, the full-rotation NX 360 15T saves time. If your work needs careful, inch-by-inch positioning, the HYDRA 13's creep speed and lighter build make it easier to control. See the full crane range, the ACE crane lineup, the Escorts crane lineup, or read the crane buying guide.
ACE NX 360 15T
Pros:
Higher max lifting capacity of 15 Tonnes
More powerful engine with 76 HP
Full 360-degree rotation capability
4-section boom with higher max boom height of 18.2 meters
Higher hoist speed of 50 Mtrs./Min (Line Speed)
Two double-acting hydraulic cylinders with counterbalance safety valve in derricking
Cons:
Lower max speed (without load) of 40 km/h compared to Escorts HYDRA 13
Heavier operating weight of 18300 kg which may affect mobility
Escorts HYDRA 13
Pros:
Disc brakes on rear wheels, potentially better for stopping power
Fuel tank capacity detailed at 45 L, provides knowledge of range
Higher max articulation up to 50 degrees compared to ACE NX 360 15T
Has a specified creep speed of 1.9 km/h for precision positioning
Lighter operating weight of 11000 kg, can be advantageous on certain terrains
Slightly more detailed information on front and rear tracks
Cons:
Lower engine power of 48 HP
Smaller boom and lower max lifting capacity of 13 Tonnes
Lower maximum speed (without load) of 29 km/h
Pros:
Cons:
Closing Recommendation
These two cranes both work in a similar tonnage range, so the deciding factor is how you need to move the load rather than raw lifting power. The ACE NX 360 15T earns its keep in modular assembly and fabrication areas where full rotation from one spot saves setup time. The Escorts HYDRA 13 is the better tool for jobs that need slow, careful positioning and a lighter machine on site. So match the machine to your work: ACE NX 360 15T for full-rotation lifting in assembly areas, Escorts HYDRA 13 for careful, precise placement jobs.
ACE NX 360 15T Vs Escorts HYDRA 13 Crane Price, Technical Specifications & Features
The ACE NX-360 15T is a 15-ton 360-degree slew pick and carry crane designed for construction, precast, and industrial lifting tasks across India. It is powered by a Tata diesel engine rated at 76 HP, allowing smooth full-circle slew operations. The crane offers a rated lifting capacity of 15 tonnes and a boom length of 18.2 metres. The full 360-degree slewing capability eliminates delays for repositioning and improves multi-directional load placement. Precision hydraulic speed control allows for careful load spotting in crowded work areas. The ACE NX-360 15T crane price in India ranges from ₹34 lakh to ₹38 lakh, based on configuration and local taxes. This 15-ton pick and carry crane ACE Construction Equipment is recommended for EPC contractors, precast developers, and crane hire businesses needing full-rotation capability.
Designed for mid-range lifting needs, the Escorts Hydra 13 is a 13-ton pick and carry crane suitable for construction, pipeline, and industrial projects across India. It operates on a Simpson diesel engine rated at 48 HP, providing consistent power under heavy loads. The Hydra 13 from Escorts Kubota Construction Equipment can lift upto 13 tonnes and extends to a boom length of 12.8 metres. Precision-controlled hydraulics allow for smooth load handling and better safety. Low fuel consumption per lift cycle helps reduce operating costs on long projects. The Escorts Hydra 13 crane price in India usually falls between ₹18 lakh and ₹20 lakh, depending on variant and location. This Escorts crane is popular among EPC contractors, infrastructure developers, and fleet rental businesses.
ACE NX 360 15T vs Escorts HYDRA 13: Which Crane Should You Buy?
The ACE NX 360 15T can rotate a full 360 degrees, which is a real advantage in a tight modular assembly area where you need to lift and swing in more than one direction without repositioning the whole machine. The Escorts HYDRA 13 answers back with a creep speed setting for very slow, precise positioning, plus disc brakes on the rear wheels for better stopping control.
If your job involves lifting and rotating around a fixed point, such as assembling modular units or placing panels, the full-rotation NX 360 15T saves time. If your work needs careful, inch-by-inch positioning, the HYDRA 13's creep speed and lighter build make it easier to control. See the full crane range, the ACE crane lineup, the Escorts crane lineup, or read the crane buying guide.
ACE NX 360 15T
Pros:
Higher max lifting capacity of 15 Tonnes
More powerful engine with 76 HP
Full 360-degree rotation capability
4-section boom with higher max boom height of 18.2 meters
Higher hoist speed of 50 Mtrs./Min (Line Speed)
Two double-acting hydraulic cylinders with counterbalance safety valve in derricking
Cons:
Lower max speed (without load) of 40 km/h compared to Escorts HYDRA 13
Heavier operating weight of 18300 kg which may affect mobility
Escorts HYDRA 13
Pros:
Disc brakes on rear wheels, potentially better for stopping power
Fuel tank capacity detailed at 45 L, provides knowledge of range
Higher max articulation up to 50 degrees compared to ACE NX 360 15T
Has a specified creep speed of 1.9 km/h for precision positioning
Lighter operating weight of 11000 kg, can be advantageous on certain terrains
Slightly more detailed information on front and rear tracks
Cons:
Lower engine power of 48 HP
Smaller boom and lower max lifting capacity of 13 Tonnes
Lower maximum speed (without load) of 29 km/h
Pros:
Cons:
Closing Recommendation
These two cranes both work in a similar tonnage range, so the deciding factor is how you need to move the load rather than raw lifting power. The ACE NX 360 15T earns its keep in modular assembly and fabrication areas where full rotation from one spot saves setup time. The Escorts HYDRA 13 is the better tool for jobs that need slow, careful positioning and a lighter machine on site. So match the machine to your work: ACE NX 360 15T for full-rotation lifting in assembly areas, Escorts HYDRA 13 for careful, precise placement jobs.
ACE NX 360 15T Vs Escorts HYDRA 13 Crane Price, Technical Specifications & Features
The ACE NX-360 15T is a 15-ton 360-degree slew pick and carry crane designed for construction, precast, and industrial lifting tasks across India. It is powered by a Tata diesel engine rated at 76 HP, allowing smooth full-circle slew operations. The crane offers a rated lifting capacity of 15 tonnes and a boom length of 18.2 metres. The full 360-degree slewing capability eliminates delays for repositioning and improves multi-directional load placement. Precision hydraulic speed control allows for careful load spotting in crowded work areas. The ACE NX-360 15T crane price in India ranges from ₹34 lakh to ₹38 lakh, based on configuration and local taxes. This 15-ton pick and carry crane ACE Construction Equipment is recommended for EPC contractors, precast developers, and crane hire businesses needing full-rotation capability.
Designed for mid-range lifting needs, the Escorts Hydra 13 is a 13-ton pick and carry crane suitable for construction, pipeline, and industrial projects across India. It operates on a Simpson diesel engine rated at 48 HP, providing consistent power under heavy loads. The Hydra 13 from Escorts Kubota Construction Equipment can lift upto 13 tonnes and extends to a boom length of 12.8 metres. Precision-controlled hydraulics allow for smooth load handling and better safety. Low fuel consumption per lift cycle helps reduce operating costs on long projects. The Escorts Hydra 13 crane price in India usually falls between ₹18 lakh and ₹20 lakh, depending on variant and location. This Escorts crane is popular among EPC contractors, infrastructure developers, and fleet rental businesses.
Full specifications: ACE NX 360 15T vs Escorts HYDRA 13 Crane
Engine
ACE NX 360 15T
Escorts HYDRA 13
Engine Make
Tata
Simpson S 433(I)-CEV BS
Engine Type
4 cylinder water cooled diesel engine
4 cylinders; water cooled diesel engine
Max Power
76 HP (56 kW) @ 2200 RPM
48 HP (35.8 kW) @ 2200 RPM
Battery
12V; Negative earth
12V single battery; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE NX 360 15T
Escorts HYDRA 13
Max. Lifting Capacity
15 Tonnes
13 Tonnes
Transmission & Clutch
ACE NX 360 15T
Escorts HYDRA 13
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering System
ACE NX 360 15T
Escorts HYDRA 13
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering; hydraulically controlled through 2 double-acting jacks
Articulation
40°
Up to 50°
Turning Radius
7400 mm
6750 mm
Hoist Mechanism
ACE NX 360 15T
Escorts HYDRA 13
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; Hydraulic winch; Rope dia 13 mm
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 15T
Escorts HYDRA 13
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatic assisted hydraulic brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Disk brakes actuated through a slave cylinder.
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE NX 360 15T
Escorts HYDRA 13
Engine Oil
NA
NA
Fuel Tank
NA
45 L
Hydraulic Tank
NA
65 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE NX 360 15T
Escorts HYDRA 13
Overall Length With Bucket
NA
10970 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
18300 kg
11000 kg
Front Track
NA
1930 mm
Rear Track
NA
1680 mm
Front Tyres
11 x 20-16 PR (4 Nos.)
10.00 x 20-16 PR (4 Nos.)
Rear Tyres
14 x 25-20 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 15T
Escorts HYDRA 13
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
3 parts hydraulically powered & fully synchronized
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-2° to +64°
NA
Boom Height
18.2 m
12.8 m
Full specifications: ACE NX 360 15T vs Escorts HYDRA 13 Crane
Engine
ACE NX 360 15T
Escorts HYDRA 13
Engine Make
Tata
Simpson S 433(I)-CEV BS
Engine Type
4 cylinder water cooled diesel engine
4 cylinders; water cooled diesel engine
Max Power
76 HP (56 kW) @ 2200 RPM
48 HP (35.8 kW) @ 2200 RPM
Battery
12V; Negative earth
12V single battery; Negative earth
Alternator
NA
NA
Lifting Capacity
ACE NX 360 15T
Escorts HYDRA 13
Max. Lifting Capacity
15 Tonnes
13 Tonnes
Transmission Clutch
ACE NX 360 15T
Escorts HYDRA 13
Drive
2 Wheel drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy-duty transmission developed especially for crane applications. Constant mesh gearbox coupled with a robust straight drive axle. 8 forward and 2 reverse speeds with high/low selector lever.
Steering
ACE NX 360 15T
Escorts HYDRA 13
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering; hydraulically controlled through 2 double-acting jacks
Articulation
40°
Up to 50°
Turning Radius
7400 mm
6750 mm
Hoist Mechanism
ACE NX 360 15T
Escorts HYDRA 13
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
4 falls; Hydraulic winch; Rope dia 13 mm
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 15T
Escorts HYDRA 13
Front Wheels
Fully pneumatic brakes on front wheels
Pneumatic assisted hydraulic brakes
Rear Wheels
Fully pneumatic brakes on rear wheels
Disk brakes actuated through a slave cylinder.
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted Hydraulic parking brakes at all wheels
Service Capacity
ACE NX 360 15T
Escorts HYDRA 13
Engine Oil
NA
NA
Fuel Tank
NA
45 L
Hydraulic Tank
NA
65 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE NX 360 15T
Escorts HYDRA 13
Overall Length With Bucket
NA
10970 mm
Overall Width
NA
2550 mm
Overall Height
NA
3100 mm
Wheel Base
NA
4880 mm
Operating Weight
18300 kg
11000 kg
Front Track
NA
1930 mm
Rear Track
NA
1680 mm
Front Tyres
11 x 20-16 PR (4 Nos.)
10.00 x 20-16 PR (4 Nos.)
Rear Tyres
14 x 25-20 PR (4 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NX 360 15T
Escorts HYDRA 13
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
3 parts hydraulically powered & fully synchronized
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Questions buyers ask about the ACE NX 360 15T vs Escorts HYDRA 13
Ans.
The ACE NX 360 15T lifts more. Its maximum lifting capacity is 15 tonnes against the Escorts HYDRA 13's 13 tonnes.
Ans.
Yes, the ACE NX 360 15T can rotate a full 360 degrees, which helps in modular assembly areas where you need to swing loads in more than one direction from one spot.
Ans.
The Escorts HYDRA 13 has a creep speed of 1.9 km/h, built for very slow, careful movement when you are placing a load exactly where it needs to go.
Ans.
The Escorts HYDRA 13 is lighter. Its operating weight is 11,000 kg against the ACE NX 360 15T's 18,300 kg, which can make it easier to move on softer ground.
Ans.
The Escorts HYDRA 13 has disc brakes on its rear wheels, which generally give firmer stopping control than the drum-type setups found on some competing cranes.
ACE NX 360 15T Vs Escorts HYDRA 13 - Compare Price & Availability Across 600+ Locations in India
Compare ACE NX 360 15T Vs Escorts HYDRA 13 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
