ACE NX 360 20T vs Escorts F20: the two differ on 39 of 53 listed specs. The main differences are Operating Weight (20400 kg vs 19475 kg), Weight (20400 kgs vs 19475 kg), Fuel Tank (NA vs 270 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE NX 360 20T
Escorts F20
ACE NX 360 20T
VS
Escorts F20
Crane
ACE NX 360 20T vs Escorts F20: the two differ on 39 of 53 listed specs. The main differences are Operating Weight (20400 kg vs 19475 kg), Weight (20400 kgs vs 19475 kg), Fuel Tank (NA vs 270 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 14 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE NX 360 20T
₹ 40 - 42 Lakh
Escorts F20
₹44.5 Lakh Onwards*
Particulars
ACE NX 360 20T
Escorts F20
ACE NX 360 20T vs Escorts F20: Which Crane to Buy?
Both are 20-tonne pick-and-carry cranes for lifting and moving loads on site. The ACE NX 360 20T can slew a full circle, which helps in restricted zones where the crane cannot move much, and its 4-section boom gives more reach without changing position. The Escorts F20 (also searched as the Escorts Farana F20) travels faster on the road between jobs and carries larger fuel and hydraulic tanks, so it can work longer stretches without stopping.
Pick by how your crane actually works each day. If you lift in a fixed spot with little room to move the whole machine, the ACE NX 360 20T's full-slew and long boom save time. If you move often between nearby sites and want longer runs on one tank, the Escorts F20 fits that pattern better. See the full ACE crane range and Escorts crane range, or read our crane buying guide.
ACE NX 360 20T
Pros:
Full-slew movement ideal for restricted zones
Higher line speed of hoist (40 Mtrs./Min)
4 sections boom for better reach
Cons:
Minimum turning radius is larger (7600 mm)
Operating weight is higher (20400 kg)
Escorts F20
Pros:
Higher max speed without load (40 km/h)
Larger fuel and hydraulic tanks for extended operation
Smaller minimum turning radius (8250 mm)
Cons:
Lower line speed of hoist not specified
Creep speed lower (1.3 km/h)
Pros:
Cons:
Closing Recommendation
Pick by how fixed or how mobile your lifting job is. The ACE NX 360 20T suits confined, restricted zones where you need to slew a full circle without moving the whole machine, and its longer boom adds reach from one spot. The Escorts F20 suits work where you travel between nearby sites often, since it moves faster on the road and carries more fuel for longer runs. So match the machine to your work: ACE NX 360 20T for confined, full-slew lifting, Escorts F20 for frequent moves between sites.
ACE NX 360 20T Vs Escorts F20 Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
The Escorts F20 is a 20-ton pick-and-carry crane built for heavy-duty industrial, power, and construction projects in India. It comes with a 101 HP VECV diesel engine, delivering steady output during extended working hours. The crane is rated for 20 tonnes and provides a boom reach of 19.5 metres. Its lifting range supports operations that require both height and load capacity. All-wheel steering enables smooth navigation across crowded and complex work areas. Specially designed tyres help protect ground surfaces while transporting loads across the site. The Escorts F20 price in India starts at ₹44.5 Lakh onwards* depending on configuration & location. The final price varies based on configuration and delivery location. This Escorts crane fits operations that require dependable lifting and efficient material handling across large-scale job sites.
ACE NX 360 20T vs Escorts F20: Which Crane to Buy?
Both are 20-tonne pick-and-carry cranes for lifting and moving loads on site. The ACE NX 360 20T can slew a full circle, which helps in restricted zones where the crane cannot move much, and its 4-section boom gives more reach without changing position. The Escorts F20 (also searched as the Escorts Farana F20) travels faster on the road between jobs and carries larger fuel and hydraulic tanks, so it can work longer stretches without stopping.
Pick by how your crane actually works each day. If you lift in a fixed spot with little room to move the whole machine, the ACE NX 360 20T's full-slew and long boom save time. If you move often between nearby sites and want longer runs on one tank, the Escorts F20 fits that pattern better. See the full ACE crane range and Escorts crane range, or read our crane buying guide.
ACE NX 360 20T
Pros:
Full-slew movement ideal for restricted zones
Higher line speed of hoist (40 Mtrs./Min)
4 sections boom for better reach
Cons:
Minimum turning radius is larger (7600 mm)
Operating weight is higher (20400 kg)
Escorts F20
Pros:
Higher max speed without load (40 km/h)
Larger fuel and hydraulic tanks for extended operation
Smaller minimum turning radius (8250 mm)
Cons:
Lower line speed of hoist not specified
Creep speed lower (1.3 km/h)
Pros:
Cons:
Closing Recommendation
Pick by how fixed or how mobile your lifting job is. The ACE NX 360 20T suits confined, restricted zones where you need to slew a full circle without moving the whole machine, and its longer boom adds reach from one spot. The Escorts F20 suits work where you travel between nearby sites often, since it moves faster on the road and carries more fuel for longer runs. So match the machine to your work: ACE NX 360 20T for confined, full-slew lifting, Escorts F20 for frequent moves between sites.
ACE NX 360 20T Vs Escorts F20 Crane Price, Technical Specifications & Features
The ACE NX-360 20T is a 20-ton full-slew pick and carry crane built for industrial erection, power plants, and large civil project lifting across India. A VECV diesel engine producing 101 HP ensures reliable hydraulic output for heavy-duty slewing operations. It has a 20-tonne lifting capacity and a boom extending to 19.2 metres, making it suitable for demanding lifting scenarios on large sites. Its full 360-degree rotation capability with load-holding valves ensures safe pick-and-place cycles. High hydraulic efficiency helps reduce fuel consumption per tonne lifted. The ACE NX-360 20T crane price in India is usually between ₹40 lakh and ₹42 lakh, depending on specifications and local conditions. This crane from ACE Construction Equipment is best for large EPC companies, power projects, and professional crane rental operators.
The Escorts F20 is a 20-ton pick-and-carry crane built for heavy-duty industrial, power, and construction projects in India. It comes with a 101 HP VECV diesel engine, delivering steady output during extended working hours. The crane is rated for 20 tonnes and provides a boom reach of 19.5 metres. Its lifting range supports operations that require both height and load capacity. All-wheel steering enables smooth navigation across crowded and complex work areas. Specially designed tyres help protect ground surfaces while transporting loads across the site. The Escorts F20 price in India starts at ₹44.5 Lakh onwards* depending on configuration & location. The final price varies based on configuration and delivery location. This Escorts crane fits operations that require dependable lifting and efficient material handling across large-scale job sites.
39 differ · 14 identical
Key highlights: ACE NX 360 20T vs Escorts F20 Crane
ACE NX 360 20T
Escorts F20
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
VECV E494
Articulation
40°
40°
Max. Speed
38 km/h
40 km/h
Fuel Tank
NA
270 L
Hydraulic Tank
NA
185 L
Overall Length
NA
10900 mm
Overall Width
NA
2700 mm
Wheelbase
NA
4880 mm
Boom Luffing Range
-2° to +64°
-3° to +65°
Warranty
1 Year
1 Year
Key highlights: ACE NX 360 20T vs Escorts F20 Crane
ACE NX 360 20T
Escorts F20
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
VECV E494
Articulation
40°
40°
Max. Speed
38 km/h
40 km/h
Fuel Tank
NA
270 L
Hydraulic Tank
NA
185 L
Overall Length
NA
10900 mm
Overall Width
NA
2700 mm
Wheelbase
NA
4880 mm
Boom Luffing Range
-2° to +64°
-3° to +65°
Warranty
1 Year
1 Year
Full specifications: ACE NX 360 20T vs Escorts F20 Crane
Engine
ACE NX 360 20T
Escorts F20
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
VECV E494
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
CEV Stage V, Diesel Engine, High Pressure Common Rail System (HPCR) technology, Turbocharged, Water Cooled, ECU Control Engine Management System
Max Power
101 HP (74 kW) @ 2200 RPM
101 HP (74 kW) @ 2200 RPM
Battery
12V; Negative earth
12 V, Negative Earth, 150 Ah Battery
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts F20
Max. Lifting Capacity
20 Tonnes
20 Tonnes
Transmission & Clutch
ACE NX 360 20T
Escorts F20
Drive
4 Wheel Drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Synchromesh transmission with 10 forward and 2 reverse speeds with Auxiliary Gear Box and Hi-low & 2WD/4WD mode selector
Steering System
ACE NX 360 20T
Escorts F20
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting rams
Articulation
40°
40°
Turning Radius
7600 mm
8250 mm
Hoist Mechanism
ACE NX 360 20T
Escorts F20
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
15T Hydraulically operated with 6 falls Built in Safety brakes
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts F20
Front Wheels
Fully pneumatic brakes on front wheels
Fully air operated brakes on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully air operated brakes on rear wheels
Parking Brake
Parking brake is pneumatically operated fail safe type
Air operated, spring actuated, fail safe brakes on front & rear wheels
Service Capacity
ACE NX 360 20T
Escorts F20
Engine Oil
NA
NA
Fuel Tank
NA
270 L
Hydraulic Tank
NA
185 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE NX 360 20T
Escorts F20
Overall Length With Bucket
NA
10900 mm
Overall Width
NA
2700 mm
Overall Height
NA
3300 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
19475 kg
Front Track
NA
1960 mm
Rear Track
NA
1960 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
12 x 24-20 PLY (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
12 x 24-20 PLY (4 Nos.)
Boom
ACE NX 360 20T
Escorts F20
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4 parts boom; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned for safety
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
NA
Boom Luffing Time
NA
NA
Boom Luffing Range
-2° to +64°
-3° to +65°
Boom Height
19.2 m
19.5 m
Full specifications: ACE NX 360 20T vs Escorts F20 Crane
Engine
ACE NX 360 20T
Escorts F20
Engine Make
Volvo Eicher E483 CRDI (CEV Stage IV)
VECV E494
Engine Type
4 cylinder water cooled diesel engine; Turbo Charged Engine with Electronic Control Unit
CEV Stage V, Diesel Engine, High Pressure Common Rail System (HPCR) technology, Turbocharged, Water Cooled, ECU Control Engine Management System
Max Power
101 HP (74 kW) @ 2200 RPM
101 HP (74 kW) @ 2200 RPM
Battery
12V; Negative earth
12 V, Negative Earth, 150 Ah Battery
Alternator
NA
NA
Lifting Capacity
ACE NX 360 20T
Escorts F20
Max. Lifting Capacity
20 Tonnes
20 Tonnes
Transmission Clutch
ACE NX 360 20T
Escorts F20
Drive
4 Wheel Drive
4 Wheel Drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Synchromesh transmission with 10 forward and 2 reverse speeds with Auxiliary Gear Box and Hi-low & 2WD/4WD mode selector
Steering
ACE NX 360 20T
Escorts F20
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Full power orbitrol with twin hydraulic double acting rams
Articulation
40°
40°
Turning Radius
7600 mm
8250 mm
Hoist Mechanism
ACE NX 360 20T
Escorts F20
Hoist
6 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
15T Hydraulically operated with 6 falls Built in Safety brakes
Hoist Speed
40 Mtrs./Min (Line Speed)
NA
Brakes
ACE NX 360 20T
Escorts F20
Front Wheels
Fully pneumatic brakes on front wheels
Fully air operated brakes on front wheels
Rear Wheels
Fully pneumatic brakes on rear wheels
Fully air operated brakes on rear wheels
Parking Brake
Parking brake is pneumatically operated fail safe type
Air operated, spring actuated, fail safe brakes on front & rear wheels
Service Capacity
ACE NX 360 20T
Escorts F20
Engine Oil
NA
NA
Fuel Tank
NA
270 L
Hydraulic Tank
NA
185 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE NX 360 20T
Escorts F20
Overall Length With Bucket
NA
10900 mm
Overall Width
NA
2700 mm
Overall Height
NA
3300 mm
Wheel Base
NA
4880 mm
Operating Weight
20400 kg
19475 kg
Front Track
NA
1960 mm
Rear Track
NA
1960 mm
Front Tyres
12 x 20-18 PR (4 Nos.)
12 x 24-20 PLY (4 Nos.)
Rear Tyres
12 x 20-18 PR (4 Nos.)
12 x 24-20 PLY (4 Nos.)
Boom
ACE NX 360 20T
Escorts F20
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4 parts boom; 3 parts hydraulically powered & fully synchronized; 4th part power extended & manually pinned for safety
Derricking
Two double-acting hydraulic cylinders with counterbalance safety valve
Questions buyers ask about the ACE NX 360 20T vs Escorts F20
Ans.
Yes, the Escorts F20 is the same machine that many buyers search for as the Escorts Farana F20. It is a 20-tonne pick-and-carry crane built by Escorts, just known by two names in the market.
Ans.
Full-slew means the crane's upper part can turn a complete circle without moving the base. The ACE NX 360 20T has this, so it can pick and place loads all around itself while parked in one spot, which is useful in a restricted zone with little room to reposition the whole machine.
Ans.
The Escorts F20 travels faster between sites, with a stated top road speed near 40 km/h without a load. If your work involves regular moves between nearby sites, this saves time over a working week.
Ans.
Since both are wheel-mounted cranes, they can carry an on-road price, which covers the ex-showroom cost plus registration, road tax and insurance. This is different from a plain ex-showroom figure, so always ask your dealer for the full on-road figure, not just the base price.
Ans.
The Escorts F20 suits slow, precise lifting a little better, with a lower creep speed near 1.3 km/h. A lower creep speed lets the driver inch the crane forward in very small steps, which helps when placing a load exactly where it needs to go.
Ans.
The ACE NX 360 20T is the heavier of the two, with an operating weight near 20,400 kg. The Escorts F20 does not list its operating weight, so ask your dealer for the figure if machine weight matters for your site's ground or transport planning.
ACE NX 360 20T Vs Escorts F20 - Compare Price & Availability Across 600+ Locations in India
Compare ACE NX 360 20T Vs Escorts F20 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
