Aquarius 1410 D
VS
Putzmeister BSA 1408 HD
Concrete Pump
Aquarius 1410 D vs Putzmeister BSA 1408 HD: the two differ on 17 of 27 listed specs. The main differences are Engine (221 HP vs 214 HP), Brand (Aquarius Concrete pump vs Putzmeister Concrete pump), Ex-Factory Price (GST incl.) (Price on Request vs ₹35 – ₹42 lakh), Max. Output (93 m³/hr vs 74 m³/hr). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Aquarius 1410 D
Putzmeister BSA 1408 HD
Aquarius 1410 D
VS
Putzmeister BSA 1408 HD
Concrete Pump
Aquarius 1410 D vs Putzmeister BSA 1408 HD: the two differ on 17 of 27 listed specs. The main differences are Engine (221 HP vs 214 HP), Brand (Aquarius Concrete pump vs Putzmeister Concrete pump), Ex-Factory Price (GST incl.) (Price on Request vs ₹35 – ₹42 lakh), Max. Output (93 m³/hr vs 74 m³/hr). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Jul 2026
Aquarius 1410 D
Price on Request
Putzmeister BSA 1408 HD
₹35 – ₹42 lakh
Particulars
Aquarius 1410 D
Putzmeister BSA 1408 HD
Aquarius 1410 D vs Putzmeister BSA 1408 HD: Which One to Buy?
This one is simple to frame: volume against pressure. The tables below carry the full numbers. The Aquarius 1410 D moves a much higher volume of concrete per hour, runs a large engine, uses a closed-loop hydraulic system to hold pressure and temperature steady, and cleans down quickly at the end of a shift. The Putzmeister BSA 1408 HD reaches a far higher pressure, runs quietly, and uses a mechanical and hydraulic setup you can diagnose on site.
So ask what your pours actually need. Filling a large raft or slab fast needs volume, and there the Aquarius finishes sooner. Pushing a stiff mix through a long line, up a tall structure, or into a tunnel or deep foundation needs pressure, and there the Putzmeister does work the higher-output pump cannot. Also weigh service: check how close each brand's support sits to your sites. See the Aquarius range, the Putzmeister range, or our concrete pump guide.
Aquarius 1410 D
Pros:
High maximum output of 93 m³/hr.
Powerful engine with 221 HP for sustained performance.
Efficient closed-loop hydraulic system for controlled pressure and temperature.
Fast end-of-shift cleaning with safe water system.
Cons:
No machine weight provided.
Overall dimensions may be larger for certain applications.
Putzmeister BSA 1408 HD
Pros:
High-pressure output of 152 bar for challenging mixes.
Robust mechanical and hydraulic system for easy on-site diagnosis.
Ideal for tunnel and deep foundation projects.
Low-noise operation suitable for urban environments.
Cons:
Lower maximum output of 74 m³/hr compared to Aquarius.
Higher price range between ₹70–88 Lakhs.
No hopper capacity provided.
Pros:
Cons:
Closing Recommendation
These two pumps solve different problems, so match the machine to the pour rather than looking for an overall winner. Choose the Aquarius 1410 D when your work is large slabs and rafts that need high volume to finish quickly, when steady output through a long pour matters, and when fast end-of-shift cleaning saves your crew time every evening. Choose the Putzmeister BSA 1408 HD when concrete must be pushed a long way along a line, high up a structure, or into a tunnel or deep foundation where pressure decides whether the job is possible, when quiet running suits built-up areas, and when being able to trace a fault on site keeps your pour going. So match the machine to your work: Aquarius 1410 D for high volume slab and raft pours, Putzmeister BSA 1408 HD for high-pressure tunnel, deep foundation and long-line work.
Aquarius 1410 D Vs Putzmeister BSA 1408 HD Concrete Pump Price, Technical Specifications & Features
The Aquarius 1410 D is a 93 m³/hr stationary concrete pump built for mass concreting, dam construction, and large infrastructure foundation pours. At 221 HP, this stationary concrete pump sustains 93 m³/hr at up to 106 bar through the longest daily operating hours without pressure loss or productivity drop. Long-life TC wear parts and a high-efficiency agitator keep blockages clear and the pour moving through the hardest dam and industrial foundation cycles. The 1410 D uses a closed-loop hydraulic system that recirculates oil at controlled pressure and temperature, and a safe water cleaning system that flushes the delivery line in minutes at end of shift. Deployed on large dam, industrial, and mass concreting contracts by infrastructure developers and project managers across India. The right high-output pump for infrastructure developers who need sustained volume with fast end-of-day cleaning on large dam and industrial contracts.
The Putzmeister BSA 1408 HD is a 74 m³/hr high-pressure stationary concrete pump built for tunnel construction, deep foundation work, and large high-rise structural pours. Producing 214 HP, this stationary concrete pump delivers 152 bar of piston-side concrete pressure, handling the thickest and most challenging mixes across extreme vertical and long horizontal delivery distances without stopping. The BSA 1408 HD uses low-noise operation that keeps it practical for enclosed tunnel environments and urban high-rise sites. There are no smart electronics — just a robust mechanical and hydraulic system that experienced operators can diagnose and service on site with standard tools. Deployed on tunnel, deep foundation, and high-rise concrete projects by EPC contractors and project managers across India. The Putzmeister BSA 1408 HD concrete pump price in India ranges between ?70–88 Lakhs. The right high-pressure pump for EPC contractors who need reliable pressure on tunnel and deep foundation contracts without smart system dependency.
Aquarius 1410 D vs Putzmeister BSA 1408 HD: Which One to Buy?
This one is simple to frame: volume against pressure. The tables below carry the full numbers. The Aquarius 1410 D moves a much higher volume of concrete per hour, runs a large engine, uses a closed-loop hydraulic system to hold pressure and temperature steady, and cleans down quickly at the end of a shift. The Putzmeister BSA 1408 HD reaches a far higher pressure, runs quietly, and uses a mechanical and hydraulic setup you can diagnose on site.
So ask what your pours actually need. Filling a large raft or slab fast needs volume, and there the Aquarius finishes sooner. Pushing a stiff mix through a long line, up a tall structure, or into a tunnel or deep foundation needs pressure, and there the Putzmeister does work the higher-output pump cannot. Also weigh service: check how close each brand's support sits to your sites. See the Aquarius range, the Putzmeister range, or our concrete pump guide.
Aquarius 1410 D
Pros:
High maximum output of 93 m³/hr.
Powerful engine with 221 HP for sustained performance.
Efficient closed-loop hydraulic system for controlled pressure and temperature.
Fast end-of-shift cleaning with safe water system.
Cons:
No machine weight provided.
Overall dimensions may be larger for certain applications.
Putzmeister BSA 1408 HD
Pros:
High-pressure output of 152 bar for challenging mixes.
Robust mechanical and hydraulic system for easy on-site diagnosis.
Ideal for tunnel and deep foundation projects.
Low-noise operation suitable for urban environments.
Cons:
Lower maximum output of 74 m³/hr compared to Aquarius.
Higher price range between ₹70–88 Lakhs.
No hopper capacity provided.
Pros:
Cons:
Closing Recommendation
These two pumps solve different problems, so match the machine to the pour rather than looking for an overall winner. Choose the Aquarius 1410 D when your work is large slabs and rafts that need high volume to finish quickly, when steady output through a long pour matters, and when fast end-of-shift cleaning saves your crew time every evening. Choose the Putzmeister BSA 1408 HD when concrete must be pushed a long way along a line, high up a structure, or into a tunnel or deep foundation where pressure decides whether the job is possible, when quiet running suits built-up areas, and when being able to trace a fault on site keeps your pour going. So match the machine to your work: Aquarius 1410 D for high volume slab and raft pours, Putzmeister BSA 1408 HD for high-pressure tunnel, deep foundation and long-line work.
Aquarius 1410 D Vs Putzmeister BSA 1408 HD Concrete Pump Price, Technical Specifications & Features
The Aquarius 1410 D is a 93 m³/hr stationary concrete pump built for mass concreting, dam construction, and large infrastructure foundation pours. At 221 HP, this stationary concrete pump sustains 93 m³/hr at up to 106 bar through the longest daily operating hours without pressure loss or productivity drop. Long-life TC wear parts and a high-efficiency agitator keep blockages clear and the pour moving through the hardest dam and industrial foundation cycles. The 1410 D uses a closed-loop hydraulic system that recirculates oil at controlled pressure and temperature, and a safe water cleaning system that flushes the delivery line in minutes at end of shift. Deployed on large dam, industrial, and mass concreting contracts by infrastructure developers and project managers across India. The right high-output pump for infrastructure developers who need sustained volume with fast end-of-day cleaning on large dam and industrial contracts.
The Putzmeister BSA 1408 HD is a 74 m³/hr high-pressure stationary concrete pump built for tunnel construction, deep foundation work, and large high-rise structural pours. Producing 214 HP, this stationary concrete pump delivers 152 bar of piston-side concrete pressure, handling the thickest and most challenging mixes across extreme vertical and long horizontal delivery distances without stopping. The BSA 1408 HD uses low-noise operation that keeps it practical for enclosed tunnel environments and urban high-rise sites. There are no smart electronics — just a robust mechanical and hydraulic system that experienced operators can diagnose and service on site with standard tools. Deployed on tunnel, deep foundation, and high-rise concrete projects by EPC contractors and project managers across India. The Putzmeister BSA 1408 HD concrete pump price in India ranges between ?70–88 Lakhs. The right high-pressure pump for EPC contractors who need reliable pressure on tunnel and deep foundation contracts without smart system dependency.
17 differ · 10 identical
Key highlights: Aquarius 1410 D vs Putzmeister BSA 1408 HD Concrete Pump
Aquarius 1410 D
Putzmeister BSA 1408 HD
Engine Type
Disel Engine
Disel Engine
Delivery Cylinder Stroke
1400 mm
1400 mm
Weight
NA
NA
Warranty
1 Year
1 Year
Overall Length
6398 mm
6550 mm
Key highlights: Aquarius 1410 D vs Putzmeister BSA 1408 HD Concrete Pump
Aquarius 1410 D
Putzmeister BSA 1408 HD
Engine Type
Disel Engine
Disel Engine
Delivery Cylinder Stroke
1400 mm
1400 mm
Weight
Not Available
Not Available
Warranty
1 Year
1 Year
Overall Length
6398 mm
6550 mm
Full specifications: Aquarius 1410 D vs Putzmeister BSA 1408 HD Concrete Pump
Engine
Aquarius 1410 D
Putzmeister BSA 1408 HD
Max Engine Power
221 HP (165 kW)
214 HP (160 kW)
Engine Type
Disel Engine
Disel Engine
Performance
Aquarius 1410 D
Putzmeister BSA 1408 HD
Max Theoretical Output
93 m³/hr (rod) / 63 m³/hr (piston)
74 m³/hr (rod) / 46 m³/h (piston)
No. of Strokes Per Minute
35 (rod) / 24 (piston)
28 (rod) / 17 (piston)
Max Concrete Pressure
106 bar
152 bar
Pumping System
Aquarius 1410 D
Putzmeister BSA 1408 HD
Delivery Cylinder Stroke
1400 mm
1400 mm
Delivery Cylinder Diameter
200 mm
200 mm
Weight And Dimension
Aquarius 1410 D
Putzmeister BSA 1408 HD
Machine Weight
NA
5000 kg
Overall Length
6398 mm
6550 mm
Overall Width
1990 mm
1800 mm
Overall Height
2664 mm
2600 mm
Hydraulic System
Aquarius 1410 D
Putzmeister BSA 1408 HD
Hydraulic System Pressure
NA
NA
Hopper Capacity
600 L
NA
Full specifications: Aquarius 1410 D vs Putzmeister BSA 1408 HD Concrete Pump
Questions buyers ask about the Aquarius 1410 D vs Putzmeister BSA 1408 HD
Ans.
Choose output when you fill large slabs and rafts and want the pour finished quickly. Choose pressure when concrete must travel a long way along a line or high up a structure. The Aquarius 1410 D leads clearly on output, the Putzmeister BSA 1408 HD on pressure. Most contractors know which of the two describes their usual job.
Ans.
The Putzmeister BSA 1408 HD is built for it. High pressure lets it push stiff mixes into a tunnel face or down into a deep foundation where the line is long and awkward. Its quieter running also helps where work continues near housing or inside an enclosed space.
Ans.
Because every pump must be washed out at the end of a pour or the concrete sets inside it. The Aquarius 1410 D is set up to clean down quickly with a safe water system. On a daily-use machine, faster cleaning saves labour every single evening and lowers the risk of a costly blockage.
Ans.
It keeps hydraulic pressure and temperature steadier while the pump works. The Aquarius 1410 D uses one. In practice that means more consistent output through a long pour and less heat stress on the oil, which helps the system last. It is a design point rather than something you operate.
Ans.
The Putzmeister BSA 1408 HD is designed so faults can be traced on site with mechanical and hydraulic checks, rather than needing specialist equipment. On a live pour that speed matters, because a pump stopped mid-pour can leave a cold joint in the structure. Ask your dealer to walk your driver through the basics.
Ans.
Ask each supplier where the nearest trained technician sits and how fast a common wear part reaches your site. Concrete pumps wear steadily because of what passes through them, so parts availability is not a small question. Speak to one owner of each machine near you before you commit.
Aquarius 1410 D Vs Putzmeister BSA 1408 HD - Compare Price & Availability Across 600+ Locations in India
Compare Aquarius 1410 D Vs Putzmeister BSA 1408 HD price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
