BEML BD475-2 vs Cat D11: the two differ on 69 of 77 listed specs. The main differences are Engine (Cummins 850 HP vs Cat 850 HP), Operating Weight (100,000 kg vs 104,236 kg (Std) / 113,700 (Carrydozer)), Weight (100000 kg vs 104236 kg), Fuel Tank (1520 L vs 1800 L). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
BEML BD475-2
Cat D11
BEML BD475-2
VS
Cat D11
Dozer
BEML BD475-2 vs Cat D11: the two differ on 69 of 77 listed specs. The main differences are Engine (Cummins 850 HP vs Cat 850 HP), Operating Weight (100,000 kg vs 104,236 kg (Std) / 113,700 (Carrydozer)), Weight (100000 kg vs 104236 kg), Fuel Tank (1520 L vs 1800 L). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
BEML BD475-2
Price Available Soon
Cat D11
Price Available Soon
Particulars
BEML BD475-2
Cat D11
BEML BD475-2 vs Cat D11: which is the bigger production dozer?
Both machines run 850 HP engines, so power alone does not separate them. The Cat D11 is the bigger machine on the numbers: it is heavier at 104,236 kg against the BD475-2's 100,000 kg, carries a larger 34.4 m³ blade against 25.6 m³, and holds more fuel at 1,800 litres against 1,520 litres, so it can run longer between refills. It is also a little faster, at 12.2 km/h against 11.6 km/h. The BEML BD475-2 is assembled in India and sits inside BEML's mining-belt service network, an advantage for public-sector coal buyers working under indigenous procurement rules.
Choose by production target and support needs. For the very largest single-pass volumes and Cat's global mining fleet support, the D11 is built to concentrate production onto fewer machines. For large Indian coal operations that value domestic assembly, PSU procurement fit and BEML's local service presence, the BD475-2 is the steadier choice. Both are mining dozers in our dozer range; read the bulldozer guide if you are new to this class of machine.
BEML BD475-2
Pros:
Assembled in India, fitting PSU and indigenous procurement requirements
BEML's established mining-belt service and parts network
Electronic Cummins QST30 engine brings modern fuel control to an Indian-built platform
Variable giant ripper option for harder bench material
Standard hexagonal AC cabin
Cons:
Lighter blade capacity at 25.6 m³ against the D11's 34.4 m³
Lighter operating weight at 100,000 kg against 104,236 kg
Slower top speed at 11.6 km/h against 12.2 km/h
Smaller fuel tank at 1,520 litres against 1,800 litres
Cat D11
Pros:
Bigger blade at 34.4 m³, moves more material per pass
Heavier at 104,236 kg for maximum production dozing
Larger fuel tank at 1,800 litres for longer shifts
Faster top speed at 12.2 km/h
Rich automation: Cat Grade Terrain 3D, AutoCarry and Command for Dozing for semi-autonomous operation
Global Cat mining dealer and parts network
Cons:
Not assembled in India, so it does not fit indigenous procurement rules the way the BD475-2 does
Needs mining-scale transport, rebuild facilities and capital-intensive support contracts
Same 850 HP rating as the BD475-2, so it offers no power advantage despite its larger size
Pros:
Cons:
Closing Recommendation
The BEML BD475-2 suits large Indian mining operations that value domestic assembly, PSU procurement fit and BEML's local service network. The Cat D11 suits the biggest opencast operations that want to concentrate production onto fewer machines, backed by Cat's global mining support. So match the machine to your work: BEML BD475-2 for Indian coal operations under indigenous procurement rules, Cat D11 for the largest opencast mines chasing maximum single-pass volume.
BEML BD475-2 Vs Cat D11 Dozer Price, Technical Specifications & Features
The BEML BD475-2 is a 100-tonne mining crawler dozer positioned at the top of BEML's range. Its 850 HP engine provides the power required for large-scale mining work, while drawbar pull reaches 1,700 kN. The 25.6 m³ blade moves material at a scale smaller machines cannot match. A variable giant ripper is available for harder bench material, adding up to 6.3 tonnes and reaching 1,800 mm. This provides deeper breaking capability before the blade takes over material movement. Ground bearing pressure of about 124 kPa reflects the machine's operating size. Firm haul roads and pit floors suit this configuration better than soft ground. A 1,520-litre fuel tank supports extended shifts, while 600 mm of ground clearance helps clear rough pit surfaces. The BD475-2 is intended for large coal and metal mining operations rather than general construction work. Its large blade capacity can reduce passes during high-volume material movement. Buyers requiring very high pushing and ripping capacity can consider this dozer machine when the BD355 no longer provides enough production. The model represents BEML's largest crawler dozer option in this range.
The Cat D11 is a 104.2-tonne mining crawler dozer with an 850 HP engine and 34.4 m³ blade capacity. It is the largest of Cat's three mining dozers listed here. Its size is aimed at large coal and metal mining operations where smaller machines cannot maintain the required output. Ripper configurations include specialty leach-pad and 5-shank coal options. Optional counterweights add force where required, while a rear drawbar with counterweight supports towing and stability on steep grades. Ground clearance reaches 798 mm, helping the machine work around rough pit surfaces. Its 1,800-litre fuel tank supports long working shifts with less frequent refuelling. Large-fleet buyers can consider this dozer machine for high-volume overburden and coal-handling work. The blade capacity allows substantial material movement in each pass. Its operating weight also provides the pushing force required for large mining cuts. General construction is not the intended application at this scale. Buyers considering the D11 should match its capacity to the expected mining volume and ground conditions. For operations requiring the highest capacity within this Cat range, the D11 provides a dedicated mining crawler dozer solution.
Agency review
Planning to buy the BEML BD475-2 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Cat D11 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
BEML BD475-2 vs Cat D11: which is the bigger production dozer?
Both machines run 850 HP engines, so power alone does not separate them. The Cat D11 is the bigger machine on the numbers: it is heavier at 104,236 kg against the BD475-2's 100,000 kg, carries a larger 34.4 m³ blade against 25.6 m³, and holds more fuel at 1,800 litres against 1,520 litres, so it can run longer between refills. It is also a little faster, at 12.2 km/h against 11.6 km/h. The BEML BD475-2 is assembled in India and sits inside BEML's mining-belt service network, an advantage for public-sector coal buyers working under indigenous procurement rules.
Choose by production target and support needs. For the very largest single-pass volumes and Cat's global mining fleet support, the D11 is built to concentrate production onto fewer machines. For large Indian coal operations that value domestic assembly, PSU procurement fit and BEML's local service presence, the BD475-2 is the steadier choice. Both are mining dozers in our dozer range; read the bulldozer guide if you are new to this class of machine.
BEML BD475-2
Pros:
Assembled in India, fitting PSU and indigenous procurement requirements
BEML's established mining-belt service and parts network
Electronic Cummins QST30 engine brings modern fuel control to an Indian-built platform
Variable giant ripper option for harder bench material
Standard hexagonal AC cabin
Cons:
Lighter blade capacity at 25.6 m³ against the D11's 34.4 m³
Lighter operating weight at 100,000 kg against 104,236 kg
Slower top speed at 11.6 km/h against 12.2 km/h
Smaller fuel tank at 1,520 litres against 1,800 litres
Cat D11
Pros:
Bigger blade at 34.4 m³, moves more material per pass
Heavier at 104,236 kg for maximum production dozing
Larger fuel tank at 1,800 litres for longer shifts
Faster top speed at 12.2 km/h
Rich automation: Cat Grade Terrain 3D, AutoCarry and Command for Dozing for semi-autonomous operation
Global Cat mining dealer and parts network
Cons:
Not assembled in India, so it does not fit indigenous procurement rules the way the BD475-2 does
Needs mining-scale transport, rebuild facilities and capital-intensive support contracts
Same 850 HP rating as the BD475-2, so it offers no power advantage despite its larger size
Pros:
Cons:
Closing Recommendation
The BEML BD475-2 suits large Indian mining operations that value domestic assembly, PSU procurement fit and BEML's local service network. The Cat D11 suits the biggest opencast operations that want to concentrate production onto fewer machines, backed by Cat's global mining support. So match the machine to your work: BEML BD475-2 for Indian coal operations under indigenous procurement rules, Cat D11 for the largest opencast mines chasing maximum single-pass volume.
BEML BD475-2 Vs Cat D11 Dozer Price, Technical Specifications & Features
The BEML BD475-2 is a 100-tonne mining crawler dozer positioned at the top of BEML's range. Its 850 HP engine provides the power required for large-scale mining work, while drawbar pull reaches 1,700 kN. The 25.6 m³ blade moves material at a scale smaller machines cannot match. A variable giant ripper is available for harder bench material, adding up to 6.3 tonnes and reaching 1,800 mm. This provides deeper breaking capability before the blade takes over material movement. Ground bearing pressure of about 124 kPa reflects the machine's operating size. Firm haul roads and pit floors suit this configuration better than soft ground. A 1,520-litre fuel tank supports extended shifts, while 600 mm of ground clearance helps clear rough pit surfaces. The BD475-2 is intended for large coal and metal mining operations rather than general construction work. Its large blade capacity can reduce passes during high-volume material movement. Buyers requiring very high pushing and ripping capacity can consider this dozer machine when the BD355 no longer provides enough production. The model represents BEML's largest crawler dozer option in this range.
The Cat D11 is a 104.2-tonne mining crawler dozer with an 850 HP engine and 34.4 m³ blade capacity. It is the largest of Cat's three mining dozers listed here. Its size is aimed at large coal and metal mining operations where smaller machines cannot maintain the required output. Ripper configurations include specialty leach-pad and 5-shank coal options. Optional counterweights add force where required, while a rear drawbar with counterweight supports towing and stability on steep grades. Ground clearance reaches 798 mm, helping the machine work around rough pit surfaces. Its 1,800-litre fuel tank supports long working shifts with less frequent refuelling. Large-fleet buyers can consider this dozer machine for high-volume overburden and coal-handling work. The blade capacity allows substantial material movement in each pass. Its operating weight also provides the pushing force required for large mining cuts. General construction is not the intended application at this scale. Buyers considering the D11 should match its capacity to the expected mining volume and ground conditions. For operations requiring the highest capacity within this Cat range, the D11 provides a dedicated mining crawler dozer solution.
69 differ · 8 identical
Key highlights: BEML BD475-2 vs Cat D11 Dozer
BEML BD475-2
Cat D11
Engine Make
Cummins QST30 T2 Tier II
Cat C32
Rated Engine Power
634 kW (850 HP) @ 2100 rpm
634 kW (850 HP) @ 1800 rpm
Maximum Torque
4045 Nm @ 1300 rpm
NA
Max Forward Speed
11.6 km/h
12.2 km/h
Max Drawbar Pull
1700 kN
NA
Fuel Tank
1520 L
1800 L
Overall Width
5265 mm
3782 mm
Track Shoe Width
710 mm
710 mm Std; 810 mm / 915 mm optional
Ground Bearing Pressure
124 kPa / 124.5 kPa (bare tractor)
NA
Blade Options
Semi-U (std)
Carrydozer; Reclamation U 42 / 53.5, Coal U 65 / 75 (m3); blade heel angle 29.3 deg, SU, U
Ripper
Variable giant ripper (optional); add. mass 6250 kg; max digging depth 1800 mm
Multifunction touchscreen with Work Monitor; VIMS std; ABA std; AutoCarry, Auto Ripper Control, Terrain 3D blade control, Command for Dozing (remote / semi-autonomous, 1 operator : 4 machines) optional; Operator Not Present monitoring
Full specifications: BEML BD475-2 vs Cat D11 Dozer
Engine
BEML BD475-2
Cat D11
Model
Cummins QST30 T2 Tier II
Cat C32
Fuel
Diesel
Diesel
Type
Electronic, 4-stroke, water-cooled V-type, turbocharged with charge air cooler
NA
No. of Cylinders
12 (V-type)
NA
Piston Displacement
30.5 L
32.1 L
Rated Engine Power
634 kW (850 HP) @ 2,100 rpm
634 kW (850 HP) @ 1,800 rpm
Maximum Torque
4,045 Nm @ 1,300 rpm
NA
Transmission
BEML BD475-2
Cat D11
Transmission Type
Planetary power shift, electronically operated, with lock-up torque converter
Planetary powershift, 3-speed electronic shift; Enhanced Auto Shifting (EAS)
Torque Converter
3-element, single-stage, single-phase with lock-up clutch
Torque divider with stator clutch, electronic control
Speeds (F/R)
3F / 3R
3F / 3R
Max Forward Speed
11.6 km/h
12.2 km/h
Max Reverse Speed
14.8 km/h
14.7 km/h
Final Drive
Spur & planetary gear, double reduction; total 36.616
Elevated final drives
Performance
BEML BD475-2
Cat D11
Max Drawbar Pull
1,700 kN
NA
Gradeability
NA
NA
Min Turning Radius
4,600 mm
NA
Steering & Brakes
BEML BD475-2
Cat D11
Steering Type
Wet multiple-disc, spring loaded, hydraulically released, hand operated
Low-effort electronic steering
Brakes
Wet multiple-disc, spring loaded, hydraulically released
NA
Undercarriage
BEML BD475-2
Cat D11
Suspension
Oscillation type equalizer bar
Suspension-type undercarriage (std); shock load to undercarriage reduced up to 50 percent
No of Bottom Rollers
8
NA
No of Top Rollers
2
Optional (carrier roller)
Track Shoes (Each Side)
39
NA
Track Shoe Width
710 mm
710 mm Std; 810 mm / 915 mm optional
Grouser Height
105 mm
NA
Track Gauge
2,770 mm
2,896 mm
Ground Contact Area
59,430 cm²
NA
Ground Bearing Pressure
124 kPa / 124.5 kPa (bare tractor)
NA
Dozer Blade
BEML BD475-2
Cat D11
Standard Blade Type
Semi-U dozer
U blade
Blade Capacity
25.6 m³
34.4 m³
Blade Width x Height
5,265 x 2,610 mm
6,320 x 2,421 mm
Max Lift Above Ground
1,630 mm
NA
Max Drop Below Ground
894 mm
NA
Blade Tilt Adjustment
1,250 mm
NA
Blade Options
Semi-U (std)
SU, U, Carrydozer; Reclamation U 42 / 53.5, Coal U 65 / 75 (m3); blade heel angle 29.3 deg
Ripper
BEML BD475-2
Cat D11
Ripper Availability
Variable giant ripper (optional); add. mass 6,250 kg; max digging depth 1,800 mm
Multifunction touchscreen with Work Monitor; VIMS std; ABA std; AutoCarry, Auto Ripper Control, Terrain 3D blade control, Command for Dozing (remote / semi-autonomous, 1 operator : 4 machines) optional; Operator Not Present monitoring
Questions buyers ask about the BEML BD475-2 vs Cat D11
Ans.
The Cat D11 is the bigger machine. It weighs 104,236 kg against the BD475-2's 100,000 kg, and its blade holds 34.4 m³ against 25.6 m³, so it moves more material in a single pass. Both machines share the same 850 HP engine rating.
Ans.
The Cat D11 is a little faster. Its top speed is 12.2 km/h against the BD475-2's 11.6 km/h. That difference is small in absolute terms but adds up over repeated cycles on a large pit.
Ans.
Yes, both are rated at 850 HP. The difference between them shows up elsewhere, mainly in blade size, operating weight and fuel capacity, rather than in raw engine output.
Ans.
The BEML BD475-2 is assembled in India, making it the only dozer of this size built domestically. This matters for PSU coal buyers who work under indigenous procurement rules and want BEML's mining-belt service network close by.
Ans.
The Cat D11 holds more fuel, at 1,800 litres against the BD475-2's 1,520 litres. That supports longer runtime between refuelling on round-the-clock mining shifts. Both tanks are sized for continuous, heavy-duty mining use.
BEML BD475-2 Vs Cat D11 - Compare Price & Availability Across 600+ Locations in India
Compare BEML BD475-2 Vs Cat D11 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
