BEML BD475-2 vs Shantui SD32W: the two differ on 73 of 77 listed specs. The main differences are Engine (Cummins 850 HP vs Cummins 320 HP), Price (Price Available Soon vs ₹1.80 – 2.20 Cr), Operating Weight (100,000 kg vs 35,830 kg), Weight (100000 kg vs 35830 kg). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
BEML BD475-2
Shantui SD32W
BEML BD475-2
VS
Shantui SD32W
Dozer
BEML BD475-2 vs Shantui SD32W: the two differ on 73 of 77 listed specs. The main differences are Engine (Cummins 850 HP vs Cummins 320 HP), Price (Price Available Soon vs ₹1.80 – 2.20 Cr), Operating Weight (100,000 kg vs 35,830 kg), Weight (100000 kg vs 35830 kg). The other 4 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
BEML BD475-2
Price Available Soon
Shantui SD32W
₹1.80 – 2.20 Cr
Particulars
BEML BD475-2
Shantui SD32W
BEML BD475-2 vs Shantui SD32W: which mining dozer fits your scale of work?
The BEML BD475-2 is the far bigger machine, at 850 HP against the Shantui SD32W's 320 HP, with a 25.6 m³ blade against 9 m³ and a drawbar pull of 1,700 kN against 318 kN. It is also the heavier dozer at 100,000 kg against 35,830 kg, with a bigger 1,520-litre fuel tank against 640 litres, built for the largest overburden cuts. The SD32W is the lighter, rock-specification machine, with a much lower ground bearing pressure that helps it work across less-firm pit surfaces, and it runs a widely serviced Cummins NTA855 engine.
Both are mining dozers in our dozer range. The BD475-2 suits the largest coal and metal mines needing maximum blade capacity. The SD32W suits quarries and mid-size mining operations that want rock-spec toughness on a smaller, easier-to-place machine. New to mining dozers? Read the bulldozer guide first.
BEML BD475-2
Pros:
Far more powerful at 850 HP with a 1,700 kN drawbar pull
Bigger 25.6 m³ blade moves close to three times the SD32W's 9 m³ per pass
Bigger 1,520-litre fuel tank for longer shifts
BEML's mining-belt service presence across Indian coalfields
Cons:
Much heavier at 100,000 kg, needing firmer haul roads
Higher ground bearing pressure at around 124 kPa, sinks more on soft ground than the SD32W
Runs a less common Cummins QST30 engine than the SD32W's widely serviced NTA855
Single standard semi-U blade against the SD32W's rock, coal and straight-tilt options
Shantui SD32W
Pros:
Much lower ground bearing pressure at 68.3 kPa, suited to softer pit and quarry surfaces
Runs the widely rebuilt Cummins NTA855 engine with global parts support
Rock-type semi-U blade with coal and straight-tilt blade options
Lighter and easier to place at 35,830 kg for smaller mining and quarry sites
Cons:
Far less powerful at 320 HP against the BD475-2's 850 HP
Smaller 9 m³ blade moves much less material per pass
Lower drawbar pull at 318 kN against the BD475-2's 1,700 kN
Smaller 640-litre fuel tank against the BD475-2's 1,520 litres
Pros:
Cons:
Closing Recommendation
The BEML BD475-2 suits the largest coal and metal mines that need maximum blade capacity, power and drawbar pull. The Shantui SD32W suits quarries and mid-size mining operations that want rock-spec toughness, lower ground pressure and a widely serviced Cummins engine on a smaller machine. So match the machine to your work: BEML BD475-2 for the largest overburden cuts, Shantui SD32W for quarry and rock work at a smaller scale.
BEML BD475-2 Vs Shantui SD32W Dozer Price, Technical Specifications & Features
The BEML BD475-2 is a 100-tonne mining crawler dozer positioned at the top of BEML's range. Its 850 HP engine provides the power required for large-scale mining work, while drawbar pull reaches 1,700 kN. The 25.6 m³ blade moves material at a scale smaller machines cannot match. A variable giant ripper is available for harder bench material, adding up to 6.3 tonnes and reaching 1,800 mm. This provides deeper breaking capability before the blade takes over material movement. Ground bearing pressure of about 124 kPa reflects the machine's operating size. Firm haul roads and pit floors suit this configuration better than soft ground. A 1,520-litre fuel tank supports extended shifts, while 600 mm of ground clearance helps clear rough pit surfaces. The BD475-2 is intended for large coal and metal mining operations rather than general construction work. Its large blade capacity can reduce passes during high-volume material movement. Buyers requiring very high pushing and ripping capacity can consider this dozer machine when the BD355 no longer provides enough production. The model represents BEML's largest crawler dozer option in this range.
The Shantui SD32W is a 35.8-tonne mining crawler dozer with a 320 HP engine. Its 9 m³ blade provides useful bulk-pushing capacity, supported by a 318 kN drawbar pull. Ground bearing pressure of 68.3 kPa is relatively low for a mining machine, helping it work across less-firm pit surfaces. A wider track footprint also spreads the machine's load. A ripper option is available for harder ground, while coal-blade and rock straight-tilt configurations provide different material-handling choices. The 640-litre fuel tank supports extended working shifts, and ground clearance reaches 500 mm. The SD32W suits operators moving from construction-class equipment into mining applications. Smaller quarry operations can also consider it where the larger DH46C3 would provide unnecessary capacity. The Shantui SD32W bulldozer price is ₹1.80 crore to ₹2.20 crore. A contractor working coal stockyards or quarry roads can consider this dozer machine when more blade capacity is required. Its relatively low ground pressure can be useful on less-firm surfaces. The available ripper adds flexibility when ground conditions become harder. Buyers can compare its operating weight and blade volume against larger mining machines before selecting it. The SD32W provides a balanced mining crawler dozer option for operators needing more capacity without moving into the heaviest class.
Agency review
Planning to buy the BEML BD475-2 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Shantui SD32W Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
BEML BD475-2 vs Shantui SD32W: which mining dozer fits your scale of work?
The BEML BD475-2 is the far bigger machine, at 850 HP against the Shantui SD32W's 320 HP, with a 25.6 m³ blade against 9 m³ and a drawbar pull of 1,700 kN against 318 kN. It is also the heavier dozer at 100,000 kg against 35,830 kg, with a bigger 1,520-litre fuel tank against 640 litres, built for the largest overburden cuts. The SD32W is the lighter, rock-specification machine, with a much lower ground bearing pressure that helps it work across less-firm pit surfaces, and it runs a widely serviced Cummins NTA855 engine.
Both are mining dozers in our dozer range. The BD475-2 suits the largest coal and metal mines needing maximum blade capacity. The SD32W suits quarries and mid-size mining operations that want rock-spec toughness on a smaller, easier-to-place machine. New to mining dozers? Read the bulldozer guide first.
BEML BD475-2
Pros:
Far more powerful at 850 HP with a 1,700 kN drawbar pull
Bigger 25.6 m³ blade moves close to three times the SD32W's 9 m³ per pass
Bigger 1,520-litre fuel tank for longer shifts
BEML's mining-belt service presence across Indian coalfields
Cons:
Much heavier at 100,000 kg, needing firmer haul roads
Higher ground bearing pressure at around 124 kPa, sinks more on soft ground than the SD32W
Runs a less common Cummins QST30 engine than the SD32W's widely serviced NTA855
Single standard semi-U blade against the SD32W's rock, coal and straight-tilt options
Shantui SD32W
Pros:
Much lower ground bearing pressure at 68.3 kPa, suited to softer pit and quarry surfaces
Runs the widely rebuilt Cummins NTA855 engine with global parts support
Rock-type semi-U blade with coal and straight-tilt blade options
Lighter and easier to place at 35,830 kg for smaller mining and quarry sites
Cons:
Far less powerful at 320 HP against the BD475-2's 850 HP
Smaller 9 m³ blade moves much less material per pass
Lower drawbar pull at 318 kN against the BD475-2's 1,700 kN
Smaller 640-litre fuel tank against the BD475-2's 1,520 litres
Pros:
Cons:
Closing Recommendation
The BEML BD475-2 suits the largest coal and metal mines that need maximum blade capacity, power and drawbar pull. The Shantui SD32W suits quarries and mid-size mining operations that want rock-spec toughness, lower ground pressure and a widely serviced Cummins engine on a smaller machine. So match the machine to your work: BEML BD475-2 for the largest overburden cuts, Shantui SD32W for quarry and rock work at a smaller scale.
BEML BD475-2 Vs Shantui SD32W Dozer Price, Technical Specifications & Features
The BEML BD475-2 is a 100-tonne mining crawler dozer positioned at the top of BEML's range. Its 850 HP engine provides the power required for large-scale mining work, while drawbar pull reaches 1,700 kN. The 25.6 m³ blade moves material at a scale smaller machines cannot match. A variable giant ripper is available for harder bench material, adding up to 6.3 tonnes and reaching 1,800 mm. This provides deeper breaking capability before the blade takes over material movement. Ground bearing pressure of about 124 kPa reflects the machine's operating size. Firm haul roads and pit floors suit this configuration better than soft ground. A 1,520-litre fuel tank supports extended shifts, while 600 mm of ground clearance helps clear rough pit surfaces. The BD475-2 is intended for large coal and metal mining operations rather than general construction work. Its large blade capacity can reduce passes during high-volume material movement. Buyers requiring very high pushing and ripping capacity can consider this dozer machine when the BD355 no longer provides enough production. The model represents BEML's largest crawler dozer option in this range.
The Shantui SD32W is a 35.8-tonne mining crawler dozer with a 320 HP engine. Its 9 m³ blade provides useful bulk-pushing capacity, supported by a 318 kN drawbar pull. Ground bearing pressure of 68.3 kPa is relatively low for a mining machine, helping it work across less-firm pit surfaces. A wider track footprint also spreads the machine's load. A ripper option is available for harder ground, while coal-blade and rock straight-tilt configurations provide different material-handling choices. The 640-litre fuel tank supports extended working shifts, and ground clearance reaches 500 mm. The SD32W suits operators moving from construction-class equipment into mining applications. Smaller quarry operations can also consider it where the larger DH46C3 would provide unnecessary capacity. The Shantui SD32W bulldozer price is ₹1.80 crore to ₹2.20 crore. A contractor working coal stockyards or quarry roads can consider this dozer machine when more blade capacity is required. Its relatively low ground pressure can be useful on less-firm surfaces. The available ripper adds flexibility when ground conditions become harder. Buyers can compare its operating weight and blade volume against larger mining machines before selecting it. The SD32W provides a balanced mining crawler dozer option for operators needing more capacity without moving into the heaviest class.
73 differ · 4 identical
Key highlights: BEML BD475-2 vs Shantui SD32W Dozer
BEML BD475-2
Shantui SD32W
Engine Make
Cummins QST30 T2 Tier II
Cummins NTA855-C360S10
Rated Engine Power
634 kW (850 HP) @ 2100 rpm
235 kW (320 HP) @ 2000 rpm
Maximum Torque
4045 Nm @ 1300 rpm
1509 Nm @ 1400 rpm
Max Forward Speed
11.6 km/h
11.5 km/h
Max Drawbar Pull
1700 kN
318 kN
Fuel Tank
1520 L
640 L
Overall Width
5265 mm
4130 mm
Track Shoe Width
710 mm
560 mm
Ground Bearing Pressure
124 kPa / 124.5 kPa (bare tractor)
68.3 kPa
Blade Options
Semi-U (std)
Coal blade 12.2 m³ and Rock straight-tilt blade 7.2 m³ also available
Ripper
Variable giant ripper (optional); add. mass 6250 kg; max digging depth 1800 mm
Optional (machine length with ripper listed: 8920 mm)
AC Cabin
Standard (hexagonal cabin with AC)
NA
Warranty
12 months / 2000 hrs
12 Months
Key highlights: BEML BD475-2 vs Shantui SD32W Dozer
BEML BD475-2
Shantui SD32W
Engine Make
Cummins QST30 T2 Tier II
Cummins NTA855-C360S10
Rated Engine Power
634 kW (850 HP) @ 2100 rpm
235 kW (320 HP) @ 2000 rpm
Maximum Torque
4045 Nm @ 1300 rpm
1509 Nm @ 1400 rpm
Max Forward Speed
11.6 km/h
11.5 km/h
Max Drawbar Pull
1700 kN
318 kN
Fuel Tank
1520 L
640 L
Overall Width
5265 mm
4130 mm
Track Shoe Width
710 mm
560 mm
Ground Bearing Pressure
124 kPa / 124.5 kPa (bare tractor)
68.3 kPa
Blade Options
Semi-U (std)
Coal blade 12.2 m³ and Rock straight-tilt blade 7.2 m³ also available
Ripper
Variable giant ripper (optional); add. mass 6250 kg; max digging depth 1800 mm
Optional (machine length with ripper listed: 8920 mm)
AC Cabin
Standard (hexagonal cabin with AC)
NA
Warranty
12 months / 2000 hrs
12 Months
Full specifications: BEML BD475-2 vs Shantui SD32W Dozer
Engine
26807
26836
Model
Cummins QST30 T2 Tier II
Cummins NTA855-C360S10
Fuel
Diesel
Diesel
Type
Electronic, 4-stroke, water-cooled V-type, turbocharged with charge air cooler
NA
No. of Cylinders
12 (V-type)
6
Piston Displacement
30.5 L
14.01 L
Rated Engine Power
634 kW (850 HP) @ 2,100 rpm
235 kW (320 HP) @ 2,000 rpm
Maximum Torque
4,045 Nm @ 1,300 rpm
1,509 Nm @ 1,400 rpm
Transmission
26807
26836
Transmission Type
Planetary power shift, electronically operated, with lock-up torque converter
Conventional powershift: hydraulic torque converter + transmission, central drive, final drive
Torque Converter
3-element, single-stage, single-phase with lock-up clutch
Hydraulic torque converter
Speeds (F/R)
3F / 3R
3 F / 3 R
Max Forward Speed
11.6 km/h
11.5 km/h
Max Reverse Speed
14.8 km/h
13.5 km/h
Final Drive
Spur & planetary gear, double reduction; total 36.616
Dual spur gear reduction, splash lubrication
Performance
26807
26836
Max Drawbar Pull
1,700 kN
318 kN
Gradeability
NA
30 °
Min Turning Radius
4,600 mm
3,800 mm
Steering & Brakes
26807
26836
Steering Type
Wet multiple-disc, spring loaded, hydraulically released, hand operated
Wet multi-disc steering clutch, spring hold-down, hydraulic disengagement
Brakes
Wet multiple-disc, spring loaded, hydraulically released
Questions buyers ask about the BEML BD475-2 vs Shantui SD32W
Ans.
The BEML BD475-2 is far more powerful. It has 850 HP against the SD32W's 320 HP, more torque, and a drawbar pull of 1,700 kN against 318 kN. Its 25.6 m³ blade also moves close to three times the material per pass that the SD32W's 9 m³ blade does.
Ans.
The Shantui SD32W sinks much less. Its ground bearing pressure of 68.3 kPa is well below the BD475-2's roughly 124 kPa, thanks to its lighter weight and wider track footprint relative to its size. That makes it a better fit for less-firm quarry and pit surfaces.
Ans.
The Shantui SD32W runs the more widely serviced engine. Its Cummins NTA855 is one of the most rebuilt diesel engines in the world, with parts and mechanics available in most mining regions. The BD475-2 runs a Cummins QST30, a capable but less common engine in general workshops.
Ans.
The Shantui SD32W suits quarry and rock work specifically. It carries a rock-type semi-U blade and heavy guarding built for that duty, along with an optional coal blade and a rock straight-tilt blade. The BD475-2's semi-U blade is a single standard configuration.
Ans.
The BEML BD475-2 suits the largest coal mining operations. Its far bigger blade, engine and drawbar pull are built for high-volume overburden removal, and BEML's mining-belt service network supports it across major Indian coalfields for the length of a long mining career.
BEML BD475-2 Vs Shantui SD32W - Compare Price & Availability Across 600+ Locations in India
Compare BEML BD475-2 Vs Shantui SD32W price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
