Suno Sabki, Chuno Apni.
Popular Products
Popular Comparisons
Contact Us



    Contact Info
    Chat with us

    Bull HD96 4WD VS CASE 851 NX Backhoe Loader

    Bull HD96 4WD
    ₹ 33-37 Lakhs*

    Bull HD96 4WD

    • Engine

      Kirloskar 96 HP

    • Bucket

      0.27 m³

    • Shovel

      1.1 m³

    • Dig. Depth

      4600 mm

    • Dump Height

      2960 mm

    • Weight

      8150 Kg
    4WD
    CASE 851 NX
    ₹ 34 - 37 Lakhs*

    CASE 851 NX

    • Engine

      CNH 74 HP

    • Bucket

      0.36 m³

    • Shovel

      1.1 m³

    • Dig. Depth

      4700 mm

    • Dump Height

      2720 mm

    • Weight

      7800 kg
    2WD/4WD

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights Bull HD96 4WDCASE 851 NX
    Bull HD96 4WD VS CASE 851 NX Backhoe Loader
    Bull HD 96 Backhoe Loader
    Bull HD96 4WD

    ₹ 33-37 Lakhs

    CASE 851 NX
    CASE 851 NX

    ₹ 34 - 37 Lakhs

    Particulars Bull HD96 4WD CASE 851 NX

    Bull HD96 4WD vs CASE 851 NX: Which One to Buy?

    Both these are 4-wheel-drive backhoe loaders for digging, loading and general site work. The Bull HD96 4WD has a more powerful engine, a bigger standard bucket and better ground clearance for rough patches. The CASE 851 NX meets CEV-5 emission norms, uses common rail direct injection, and pulls with more digging force from its bucket.

    If you plan to run the machine in a state that is tightening emission checks, or you want a machine that will sell easily later because of its cleaner engine, the CASE 851 NX is the safer pick. If raw power, a bigger bucket and rough-ground clearance matter more for your daily jobs, the Bull HD96 4WD does that job well. Browse the wider Bull backhoe loader range, the CASE backhoe loader range, all backhoe loaders, or read our backhoe loader buying guide.

    CASE 851 NX CEV5

    Pros:

    • Follows CEV-5 norms for cleaner operation
    • Electronic, Common Rail Direct Injection engine
    • High torque of 375 Nm at lower RPM (1400 RPM)
    • Relatively large fuel tank capacity of 129 L
    • Maximum engine power of 74 HP
    • Bucket digging force of up to 6550 kgf
    • Standard GPS included

    Cons:

    • Less gross engine power compared to Bull HD96 4WD
    • Lower engine displacement of 2.80 L
    • Smaller bucket capacity of 0.36 m³
    • Slightly lesser machine weight could imply less stability
    • Lower maximum speed of 34 km/hr

    Bull HD96 4WD

    Pros:

    • More powerful engine with 96 HP
    • Higher shovel breakout force of 8183 kgf
    • Larger standard bucket capacity of 0.27 m³
    • Higher maximum speed of 40 km/hr
    • Larger hydraulic tank capacity of 125 L
    • Better ground clearance of 480 mm

    Cons:

    • Doesn't follow CEV-5 norms
    • Engine displacement not mentioned
    • Slightly lower engine torque of 377 Nm
    • Shorter warranty period compared to industry standards
    • Higher overall machine weight might reduce maneuverability

    Pros:

    Cons:

    Closing Recommendation

    Both these backhoe loaders suit everyday digging and loading work, but they lean in different directions. The CASE 851 NX meets the newer CEV-5 emission norms and pulls with strong digging force, which suits work near cities or in states with tighter pollution checks. The Bull HD96 4WD gives you more raw engine power, a bigger bucket and better ground clearance, which suits open sites with rough ground. So match the machine to your work: CASE 851 NX for emission compliance and strong digging force, Bull HD96 4WD for raw power and rough-ground clearance.

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Price, Technical Specifications & Features

    Brand Bull Backhoe Loader CASE Backhoe Loader
    Type 4WD 2WD/4WD
    Price ₹ 33-37 Lakhs ₹ 34 - 37 Lakhs
    Engine Kirloskar 96 HP CNH 74 HP
    Bucket 0.27 m³ 0.36 m³
    Shovel 1.1 m³ 1.1 m³
    Max Digging Depth 4600 mm 4700 mm
    Max Dump Height 2960 mm 2720 mm
    Weight 8150 Kg 7800 kg
    Quick Overview:

    The BULL HD 96 4WD Backhoe Loader is designed for heavy-duty use, powered by a 96 HP (70.6 kW) Kirloskar engine with Carraro synchro-shuttle transmission, delivering strong torque and reliable operation in tough environments. The BULL HD 96 4WD features 4WD capability, 240 bar hydraulics, and 134 LPM pump flow, ensuring superior digging force, traction, and efficiency in high-load situations. The machine has a square-cut 90° foundation bucket, the highest breakout force in its class, and a heavy operating weight for better stability. Additional features include scratch-resistant paint, a comfortable cabin, and a low maintenance design. The BULL HD 96 backhoe loader price in India ranges from ₹33–37 lakh, making it a solid choice for contractors involved in infrastructure and heavy excavation work.

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    Bull HD96 4WD vs CASE 851 NX: Which One to Buy?

    Both these are 4-wheel-drive backhoe loaders for digging, loading and general site work. The Bull HD96 4WD has a more powerful engine, a bigger standard bucket and better ground clearance for rough patches. The CASE 851 NX meets CEV-5 emission norms, uses common rail direct injection, and pulls with more digging force from its bucket.

    If you plan to run the machine in a state that is tightening emission checks, or you want a machine that will sell easily later because of its cleaner engine, the CASE 851 NX is the safer pick. If raw power, a bigger bucket and rough-ground clearance matter more for your daily jobs, the Bull HD96 4WD does that job well. Browse the wider Bull backhoe loader range, the CASE backhoe loader range, all backhoe loaders, or read our backhoe loader buying guide.

    CASE 851 NX CEV5

    Pros:

    • Follows CEV-5 norms for cleaner operation
    • Electronic, Common Rail Direct Injection engine
    • High torque of 375 Nm at lower RPM (1400 RPM)
    • Relatively large fuel tank capacity of 129 L
    • Maximum engine power of 74 HP
    • Bucket digging force of up to 6550 kgf
    • Standard GPS included

    Cons:

    • Less gross engine power compared to Bull HD96 4WD
    • Lower engine displacement of 2.80 L
    • Smaller bucket capacity of 0.36 m³
    • Slightly lesser machine weight could imply less stability
    • Lower maximum speed of 34 km/hr

    Bull HD96 4WD

    Pros:

    • More powerful engine with 96 HP
    • Higher shovel breakout force of 8183 kgf
    • Larger standard bucket capacity of 0.27 m³
    • Higher maximum speed of 40 km/hr
    • Larger hydraulic tank capacity of 125 L
    • Better ground clearance of 480 mm

    Cons:

    • Doesn't follow CEV-5 norms
    • Engine displacement not mentioned
    • Slightly lower engine torque of 377 Nm
    • Shorter warranty period compared to industry standards
    • Higher overall machine weight might reduce maneuverability

    Pros:

    Cons:

    Closing Recommendation

    Both these backhoe loaders suit everyday digging and loading work, but they lean in different directions. The CASE 851 NX meets the newer CEV-5 emission norms and pulls with strong digging force, which suits work near cities or in states with tighter pollution checks. The Bull HD96 4WD gives you more raw engine power, a bigger bucket and better ground clearance, which suits open sites with rough ground. So match the machine to your work: CASE 851 NX for emission compliance and strong digging force, Bull HD96 4WD for raw power and rough-ground clearance.

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Price, Technical Specifications & Features

    Bull HD96 4WD CASE 851 NX
    Brand
    Bull Backhoe Loader CASE Backhoe Loader
    Type
    4WD 2WD/4WD
    Price
    ₹ 33-37 Lakhs ₹ 34 - 37 Lakhs
    Engine
    Kirloskar 96 HP CNH 74 HP
    Bucket
    0.27 m³ 0.36 m³
    Shovel
    1.1 m³ 1.1 m³
    Max Digging Depth
    4600 mm 4700 mm
    Max Dump Height
    2960 mm 2720 mm
    Weight
    8150 Kg 7800 kg
    Quick Overview:

    The BULL HD 96 4WD Backhoe Loader is designed for heavy-duty use, powered by a 96 HP (70.6 kW) Kirloskar engine with Carraro synchro-shuttle transmission, delivering strong torque and reliable operation in tough environments. The BULL HD 96 4WD features 4WD capability, 240 bar hydraulics, and 134 LPM pump flow, ensuring superior digging force, traction, and efficiency in high-load situations. The machine has a square-cut 90° foundation bucket, the highest breakout force in its class, and a heavy operating weight for better stability. Additional features include scratch-resistant paint, a comfortable cabin, and a low maintenance design. The BULL HD 96 backhoe loader price in India ranges from ₹33–37 lakh, making it a solid choice for contractors involved in infrastructure and heavy excavation work.

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Key Highlights

    Bull HD96 4WD CASE 851 NX
    Engine Make KIRLOSKAR 4R 1040 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank 115 L 129 L
    Max Torque 377 Nm @ 1400 rpm 375 Nm @ 1400 RPM
    Max Speed 40 km/hr 34.0 km/hr
    Hydraulic System 125 L 96 L
    Max Working Height 5920 mm 5700 mm
    Excavator Max Lift Capacity 1400 kg 1477 kg
    Loader Load Over Height 4140 mm 3800 mm
    Overall Length 6040 mm 6060 mm
    Wheel Base 2220 mm 2180 mm
    Bucket Digging Force 6072 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force 8183 kgf 5000 kgf
    Warranty 1 Year 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Key Highlights

    Bull HD96 4WD CASE 851 NX
    Engine Make
    KIRLOSKAR 4R 1040 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank
    115 L 129 L
    Max Torque
    377 Nm @ 1400 rpm 375 Nm @ 1400 RPM
    Max Speed
    40 km/hr 34.0 km/hr
    Hydraulic System
    125 L 96 L
    Max Working Height
    5920 mm 5700 mm
    Excavator Max Lift Capacity
    1400 kg 1477 kg
    Loader Load Over Height
    4140 mm 3800 mm
    Overall Length
    6040 mm 6060 mm
    Wheel Base
    2220 mm 2180 mm
    Bucket Digging Force
    6072 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force
    8183 kgf 5000 kgf
    Warranty
    1 Year 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Specifications

    Engine

    Bull HD96 4WD CASE 851 NX
    Model Kirloskar 96 HP CNH 74 HP
    Type T EU STAGE II ; Diesel Engine; 4 Cylinders CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power 96 HP (71.6 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque 377 Nm @ 1400 rpm 375 Nm @ 1400 RPM
    Displacement NA 2.80 L
    Battery 12V / 180Ah 12V / 110 Ah
    Alternator NA NA

    Transmission

    Bull HD96 4WD CASE 851 NX
    Type CARRARO synchro - shuttle transmission with integral torque converter CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Bull HD96 4WD CASE 851 NX
    Type Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Power Steering
    Working Pressure 245 bar 140 bar

    Steering Turning Circle

    Bull HD96 4WD CASE 851 NX
    Inner Wheels Braked - Outside Loader Bucket 8800 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels 6300 mm NA
    Inner Wheels not Braked - Outside Loader Bucket 11600 mm 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels 8900 mm NA

    Brakes

    Bull HD96 4WD CASE 851 NX
    Service Hydraulically actuated, duel line, self adjusting, compensated oil immersed, multi-disc type Hydraulic foot operated, 2 disc per side
    Parking Hand operated; oil immersed multi disc on the rear axle. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    Bull HD96 4WD CASE 851 NX
    Front 12.5 / 80 x 18 -12 PR 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD)
    Rear 16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 16.9 x 28 - 12 PR

    Speed

    Bull HD96 4WD CASE 851 NX
    Forward- 1st gear NA 5.7 km/hr
    Reverse- 1st gear NA 7.0 km/hr
    Forward- 2nd gear NA 9.3 km/hr
    Reverse- 2nd gear NA 11.5 km/hr
    Forward- 3rd gear 40 km/hr 19.5 km/hr
    Reverse- 3rd gear 9.3 km/hr Not recommended
    Forward- 4th gear NA 34.0 km/hr
    Reverse- 4th gear NA Not Recommened

    Hydraulics

    Bull HD96 4WD CASE 851 NX
    Type Gear Pump Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow 134 L/min @ 2200 RPM 143 L/min
    System Pressure 240 bar 240 bar

    Axles

    Bull HD96 4WD CASE 851 NX
    Rear Axle Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle Steer axle; centrally pivoted with oscillation angle ±16°. CNH PS1300 (2WD) / NH 26.17M (4WD)

    Service Capacities

    Bull HD96 4WD CASE 851 NX
    Fuel Tank 115 L 129 L
    Engine Coolant 17 L 10 L
    Engine Oil 12 L 8.5 L
    Hydraulic Tank 100 L NA
    Hydraulic System 125 L 96 L
    Transmission 19.5 L 18 L (2WD) / 20 L (4WD)
    Rear Axle 17 L 17.1 L

    Excavator Performance

    Bull HD96 4WD CASE 851 NX
    Maximum Digging Depth 4600 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre 6810 mm 5900 mm
    Reach-Ground Level to Slew Centre 5500 mm 7220 mm
    Reach at Full Height to Slew Centre 2850 mm 2400 mm
    Side Reach to Centre Line of Machine 6080 mm NA
    Maximum Working Height 5920 mm 5700 mm
    Maximum Load Over Height 4140 mm 3800 mm
    Bucket Rotation Angle 188° 204° & 160°
    Bucket Digging force 6072 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Arm Digging force 3150 kgf 3900 kgf
    Maximum Lift Capacity 1400 kg 1477 kg
    Standard Bucket Capacity 0.27 m³ 0.36 / 0.40 m³
    Standard Bucket Width NA NA

    Loader Performance

    Bull HD96 4WD CASE 851 NX
    Dump Height 2960 mm 2720 mm
    Load Over Height 3390 mm 3300 mm
    Pin Height 3610 mm 3600 mm
    Pin Forward Reach 420 mm 240 mm
    Reach At Ground 1470 mm 1980 mm
    Maximum Reach at Full Height 1280 mm 1190 mm
    Max Reach Full Height Dumped 890 mm 760 mm
    Below Ground Level Dig Depth 100 mm 110 mm
    Rollback at Ground 49° 33°
    Dump Angle 45° 45°
    Shovel Breakout Force 8183 kgf 5000 kgf
    Loader Arm Breakout Force 5251 kgf 5250 kgf
    Maximum Payload 1800 kg 2050 kg

    Overall Dimensions And Weight

    Bull HD96 4WD CASE 851 NX
    Machine Weight 8150 kg 7800 kg
    Overall Length 6040 mm 6060 mm
    Wheelbase 2220 mm 2180 mm
    Slew Centre to Rear Axle Centre NA NA
    Minimum Ground Clearance 480 mm 380 mm
    Slew Ground Clearance 650 mm NA
    Height of Cabin 3000 mm 2830 mm
    Overall Height 3710 mm 3850 mm
    Track Width-Rear 1700 mm 1700 mm
    Track Width-Front 1930 mm 1880 mm
    Width Over Bucket 2350 mm 2280 mm

    Bull HD96 4WD Vs CASE 851 NX Backhoe Loader Specifications

    Engine

    Bull HD96 4WD CASE 851 NX
    Model
    Kirloskar 96 HP CNH 74 HP
    Type
    T EU STAGE II ; Diesel Engine; 4 Cylinders CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power
    96 HP (71.6 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque
    377 Nm @ 1400 rpm 375 Nm @ 1400 RPM
    Displacement
    NA 2.80 L
    Battery
    12V / 180Ah 12V / 110 Ah
    Alternator
    NA NA

    Transmission

    Bull HD96 4WD CASE 851 NX
    Type
    CARRARO synchro - shuttle transmission with integral torque converter CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    Bull HD96 4WD CASE 851 NX
    Type
    Full power; front wheel hydraulic power steering with manual capability in the event of engine or hydraullic power failure. Power Steering
    Working Pressure
    245 bar 140 bar

    Steering Turning Circle

    Bull HD96 4WD CASE 851 NX
    Inner Wheels Braked - Outside Loader Bucket
    8800 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels
    6300 mm NA
    Inner Wheels not Braked - Outside Loader Bucket
    11600 mm 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels
    8900 mm NA

    Brakes

    Bull HD96 4WD CASE 851 NX
    Service
    Hydraulically actuated, duel line, self adjusting, compensated oil immersed, multi-disc type Hydraulic foot operated, 2 disc per side
    Parking
    Hand operated; oil immersed multi disc on the rear axle. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    Bull HD96 4WD CASE 851 NX
    Front
    12.5 / 80 x 18 -12 PR 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD)
    Rear
    16.9 x 28 -12 PR (STD INDUSTRIAL TYRE) 16.9 x 28 - 12 PR

    Speed

    Bull HD96 4WD CASE 851 NX
    Forward- 1st gear
    NA 5.7 km/hr
    Reverse- 1st gear
    NA 7.0 km/hr
    Forward- 2nd gear
    NA 9.3 km/hr
    Reverse- 2nd gear
    NA 11.5 km/hr
    Forward- 3rd gear
    40 km/hr 19.5 km/hr
    Reverse- 3rd gear
    9.3 km/hr Not recommended
    Forward- 4th gear
    NA 34.0 km/hr
    Reverse- 4th gear
    NA Not Recommened

    Hydraulics

    Bull HD96 4WD CASE 851 NX
    Type
    Gear Pump Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow
    134 L/min @ 2200 RPM 143 L/min
    System Pressure
    240 bar 240 bar

    Axles

    Bull HD96 4WD CASE 851 NX
    Rear Axle
    Drive axle rigidly mounted; incorporates Max-trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle
    Steer axle; centrally pivoted with oscillation angle ±16°. CNH PS1300 (2WD) / NH 26.17M (4WD)

    Service Capacities

    Bull HD96 4WD CASE 851 NX
    Fuel Tank
    115 L 129 L
    Engine Coolant
    17 L 10 L
    Engine Oil
    12 L 8.5 L
    Hydraulic Tank
    100 L NA
    Hydraulic System
    125 L 96 L
    Transmission
    19.5 L 18 L (2WD) / 20 L (4WD)
    Rear Axle
    17 L 17.1 L

    Excavator Performance

    Bull HD96 4WD CASE 851 NX
    Maximum Digging Depth
    4600 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre
    6810 mm 5900 mm
    Reach-Ground Level to Slew Centre
    5500 mm 7220 mm
    Reach at Full Height to Slew Centre
    2850 mm 2400 mm
    Side Reach to Centre Line of Machine
    6080 mm NA
    Maximum Working Height
    5920 mm 5700 mm
    Maximum Load Over Height
    4140 mm 3800 mm
    Bucket Rotation Angle
    188° 204° & 160°
    Bucket Digging force
    6072 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Arm Digging force
    3150 kgf 3900 kgf
    Maximum Lift Capacity
    1400 kg 1477 kg
    Standard Bucket Capacity
    0.27 m³ 0.36 / 0.40 m³
    Standard Bucket Width
    NA NA

    Loader Performance

    Bull HD96 4WD CASE 851 NX
    Dump Height
    2960 mm 2720 mm
    Load Over Height
    3390 mm 3300 mm
    Pin Height
    3610 mm 3600 mm
    Pin Forward Reach
    420 mm 240 mm
    Reach At Ground
    1470 mm 1980 mm
    Maximum Reach at Full Height
    1280 mm 1190 mm
    Max Reach Full Height Dumped
    890 mm 760 mm
    Below Ground Level Dig Depth
    100 mm 110 mm
    Rollback at Ground
    49° 33°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    8183 kgf 5000 kgf
    Loader Arm Breakout Force
    5251 kgf 5250 kgf
    Maximum Payload
    1800 kg 2050 kg

    Overall Dimensions And Weight

    Bull HD96 4WD CASE 851 NX
    Machine Weight
    8150 kg 7800 kg
    Overall Length
    6040 mm 6060 mm
    Wheelbase
    2220 mm 2180 mm
    Slew Centre to Rear Axle Centre
    NA NA
    Minimum Ground Clearance
    480 mm 380 mm
    Slew Ground Clearance
    650 mm NA
    Height of Cabin
    3000 mm 2830 mm
    Overall Height
    3710 mm 3850 mm
    Track Width-Rear
    1700 mm 1700 mm
    Track Width-Front
    1930 mm 1880 mm
    Width Over Bucket
    2350 mm 2280 mm

    Popular Comparisons with Bull HD96 4WD

    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Tata Hitachi Shinrai Power
    Tata Hitachi Tata Hitachi Shinrai Power
    4.5 rating
    ₹ 36-38 Lakhs
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    BL9H Backhoe Loader Price
    BEML BEML BL9H 4×4
    4.5 rating
    ₹32 - 36 lakhs
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Escorts Jungli HT Backhoe Loader
    Escorts Kubota Escorts Jungli HT
    4.5 rating
    ₹ 35-37 Lakhs
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    ACE Phantom 4WD N Backhoe Loader
    ACE ACE Phantom 4WD N
    4.5 rating
    Price Available Soon
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    ACE Phantom 4WD Backhoe Loader
    ACE ACE Phantom 4WD
    4.5 rating
    Price Available Soon
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Tata Hitachi Shinrai Power Price
    Tata Hitachi Tata Hitachi Shinrai Power 4
    4.5 rating
    ₹ 23-28 Lakhs
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Bull HD 76 Price
    Bull Machines Bull HD76 4WD
    4.5 rating
    ₹ 30-35 Lakhs
    Compare
    VS
    Bull HD 96 Backhoe Loader
    Bull Machines Bull HD96 4WD
    4.5 rating
    ₹ 33-37 Lakhs
    Bull HD 100 Price
    Bull Machines Bull HD100 4WD
    4.5 rating
    ₹ 34-38 Lakhs
    Compare

    Popular Comparisons with CASE 851 NX

    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    E-kubota blx75
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 Backhoe Loader
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra Earthmaster Price
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou MBL 745 HT
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    MBL 745 HT Price
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Digmax Super On Road Price
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 EX on Road Price
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 EX Price
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE AX 130 Backhoe Loader Price
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE AX 124 Price
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 4DX Price
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull HD 76 Price
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    Compare
    VS
    CASE 851 NX
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull SD76 Price
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs
    Compare

    Frequently Asked Question

    Ans.

    Yes, a CEV-5 compliant machine usually sells easily later since buyers worry less about future emission rule changes. This is a real point in favour of the CASE 851 NX for a buyer who plans to sell in a few years.

    Ans.

    The Bull HD96 4WD suits rough or uneven ground better, thanks to its higher ground clearance of 480 mm. This helps it move over ruts, small rocks and soft patches without getting stuck.

    Ans.

    It can be, since its higher engine power and larger bucket help it finish loading jobs faster across multiple sites. A fleet owner should still check warranty terms carefully, as the Bull HD96 4WD has a shorter standard warranty period.

    Ans.

    Common rail direct injection sprays fuel more precisely into the engine, which helps meet CEV-5 emission norms while keeping engine performance steady. This is one reason the CASE 851 NX runs cleaner than older engine designs.

    Ans.

    Both machines use standard backhoe loader controls, so neither is harder to learn than the other. A first-time driver should still get proper training before working on any 4-wheel-drive backhoe loader.

    Ans.

    Yes, both Bull and CASE have dealer networks across India, so spare parts are generally not hard to source. Always confirm part availability with your local dealer before you commit to a machine.

    Bull HD96 4WD Vs CASE 851 NX - Compare Price & Availability Across 600+ Locations in India

    Compare Bull HD96 4WD Vs CASE 851 NX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities

    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities

    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities

    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare