Contact Us



    Chat with us

    CASE 851 NX VS JCB 4DX Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights CASE 851 NXJCB 4DX
    CASE 851 NX VS JCB 4DX Backhoe Loader
    CASE 851 NX
    CASE 851 NX

    ₹ 34 - 37 Lakhs

    JCB 4DX Price
    JCB 4DX

    ₹ 36-40 Lakhs

    Particulars CASE 851 NX JCB 4DX

    Case 851 NX vs JCB 4DX: Which One Should You Buy?

    Both machines have the same 74 HP engine. Both dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The Case 851 NX is lighter. It uses less fuel and moves easily on hard, flat ground. It is a good choice if you want low running cost every day. The JCB 4DX is heavier. It digs deeper and lifts higher. It is better for big jobs where you need more reach and more power.

    Before you buy, think about a few simple things. Is there a service centre near you? Which brand can fix your machine faster if it stops? Will it be easy to sell after some years? These things matter more than a few numbers on paper. You can see the full Case backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    JCB 4DX

    Pros:

    • Higher excavator maximum lift capacity of 2547 kg compared to CASE 851 NX
    • Better loader load over height at 3370 mm
    • Slightly higher engine torque with 440 Nm @ 1150 RPM
    • Greater digging depth at 5360 mm enhancing excavation capabilities
    • More advanced braking system with JCB ‘Q’ brakes; oil immersed; multi-disc type
    • Higher battery alternator capacity (130A)
    • Larger standard bucket capacity of 0.40 m³ for the backhoe
    • Faster top speed of 40.0 km/hr for quicker on-site movement

    Cons:

    • The standard shovel capacity is slightly less at 1.2 m³
    • Lower maximum reach at full height compared to CASE 851 NX
    • Lesser dump height at 2930 mm

    CASE 851 NX CEV5

    Pros:

    • Compliance with CEV Emission Stage-V for a cleaner operation
    • Better fuel tank capacity (1-liter additional) than JCB 4DX
    • Bucket rotation angle offers two settings, providing versatility
    • Higher bucket digging force especially at the 160° rotation angle
    • Larger maximum payload of 2050 kg which is beneficial for heavy-duty tasks
    • Improved minimum ground clearance of 380 mm for better maneuverability over rough terrain
    • Greater dump angle of 45° for efficient unloading

    Cons:

    • Lower excavator max lift capacity at 1477 kg
    • Smaller engine displacement at 2.80 L
    • Lesser maximum speed at 34 km/hr reducing quick transits
    • Transmission specs such as Alternator details not available

    Pros:

    Cons:

    Closing Recommendation

    Both backhoes carry the same engine class and sit close in cost, so look at how they work. The JCB 4DX lifts much more with the digging arm and loads higher into trucks. The CASE 851 NX CEV5 uses cleaner engine technology and holds slightly more diesel. So match the machine to your work: JCB 4DX for heavy lifting and high loading, CASE 851 NX CEV5 for clean running and longer hours.

    CASE 851 NX Vs JCB 4DX Backhoe Loader Price, Technical Specifications & Features

    Brand CASE Backhoe Loader JCB Backhoe Loader
    Type 2WD/4WD 2WD/4WD
    Price ₹ 34 - 37 Lakhs ₹ 36-40 Lakhs
    Engine CNH 74 HP JCB 74 HP
    Bucket 0.36 m³ 0.32 m³
    Shovel 1.1 m³ 1.2 m³
    Max Digging Depth 4700 mm 5360 mm
    Max Dump Height 2720 mm 2930 mm
    Weight 7800 kg 8450 Kg
    Quick Overview:

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    Case 851 NX vs JCB 4DX: Which One Should You Buy?

    Both machines have the same 74 HP engine. Both dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The Case 851 NX is lighter. It uses less fuel and moves easily on hard, flat ground. It is a good choice if you want low running cost every day. The JCB 4DX is heavier. It digs deeper and lifts higher. It is better for big jobs where you need more reach and more power.

    Before you buy, think about a few simple things. Is there a service centre near you? Which brand can fix your machine faster if it stops? Will it be easy to sell after some years? These things matter more than a few numbers on paper. You can see the full Case backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    JCB 4DX

    Pros:

    • Higher excavator maximum lift capacity of 2547 kg compared to CASE 851 NX
    • Better loader load over height at 3370 mm
    • Slightly higher engine torque with 440 Nm @ 1150 RPM
    • Greater digging depth at 5360 mm enhancing excavation capabilities
    • More advanced braking system with JCB ‘Q’ brakes; oil immersed; multi-disc type
    • Higher battery alternator capacity (130A)
    • Larger standard bucket capacity of 0.40 m³ for the backhoe
    • Faster top speed of 40.0 km/hr for quicker on-site movement

    Cons:

    • The standard shovel capacity is slightly less at 1.2 m³
    • Lower maximum reach at full height compared to CASE 851 NX
    • Lesser dump height at 2930 mm

    CASE 851 NX CEV5

    Pros:

    • Compliance with CEV Emission Stage-V for a cleaner operation
    • Better fuel tank capacity (1-liter additional) than JCB 4DX
    • Bucket rotation angle offers two settings, providing versatility
    • Higher bucket digging force especially at the 160° rotation angle
    • Larger maximum payload of 2050 kg which is beneficial for heavy-duty tasks
    • Improved minimum ground clearance of 380 mm for better maneuverability over rough terrain
    • Greater dump angle of 45° for efficient unloading

    Cons:

    • Lower excavator max lift capacity at 1477 kg
    • Smaller engine displacement at 2.80 L
    • Lesser maximum speed at 34 km/hr reducing quick transits
    • Transmission specs such as Alternator details not available

    Pros:

    Cons:

    Closing Recommendation

    Both backhoes carry the same engine class and sit close in cost, so look at how they work. The JCB 4DX lifts much more with the digging arm and loads higher into trucks. The CASE 851 NX CEV5 uses cleaner engine technology and holds slightly more diesel. So match the machine to your work: JCB 4DX for heavy lifting and high loading, CASE 851 NX CEV5 for clean running and longer hours.

    CASE 851 NX Vs JCB 4DX Backhoe Loader Price, Technical Specifications & Features

    CASE 851 NX JCB 4DX
    Brand
    CASE Backhoe Loader JCB Backhoe Loader
    Type
    2WD/4WD 2WD/4WD
    Price
    ₹ 34 - 37 Lakhs ₹ 36-40 Lakhs
    Engine
    CNH 74 HP JCB 74 HP
    Bucket
    0.36 m³ 0.32 m³
    Shovel
    1.1 m³ 1.2 m³
    Max Digging Depth
    4700 mm 5360 mm
    Max Dump Height
    2720 mm 2930 mm
    Weight
    7800 kg 8450 Kg
    Quick Overview:

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    CASE 851 NX Vs JCB 4DX Backhoe Loader Key Highlights

    CASE 851 NX JCB 4DX
    Engine Make CNH Industrial (India) F28-CF28A001A*U JCB 430
    Fuel Tank 129 L 128 L
    Max Torque 375 Nm @ 1400 RPM 440 Nm @ 1150 RPM
    Max Speed 34.0 km/hr 40.0 km/hr
    Hydraulic System 96 L 115 L
    Max Working Height 5700 mm 6250 mm
    Excavator Max Lift Capacity 1477 kg 2547 kg
    Loader Load Over Height 3800 mm 3960 mm
    Overall Length 6060 mm 6350 mm
    Wheel Base 2180 mm 2340 mm
    Bucket Digging Force 5000 kgf (204°) / 6550 kgf (160°) 6716 kgf
    Shovel Breakout Force 5000 kgf 6264 mm
    Warranty 1 Year 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    CASE 851 NX Vs JCB 4DX Backhoe Loader Key Highlights

    CASE 851 NX JCB 4DX
    Engine Make
    CNH Industrial (India) F28-CF28A001A*U JCB 430
    Fuel Tank
    129 L 128 L
    Max Torque
    375 Nm @ 1400 RPM 440 Nm @ 1150 RPM
    Max Speed
    34.0 km/hr 40.0 km/hr
    Hydraulic System
    96 L 115 L
    Max Working Height
    5700 mm 6250 mm
    Excavator Max Lift Capacity
    1477 kg 2547 kg
    Loader Load Over Height
    3800 mm 3960 mm
    Overall Length
    6060 mm 6350 mm
    Wheel Base
    2180 mm 2340 mm
    Bucket Digging Force
    5000 kgf (204°) / 6550 kgf (160°) 6716 kgf
    Shovel Breakout Force
    5000 kgf 6264 mm
    Warranty
    1 Year 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    CASE 851 NX Vs JCB 4DX Backhoe Loader Specifications

    Engine

    CASE 851 NX JCB 4DX
    Model CNH 74 HP JCB 74 HP
    Type CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power 74 HP (54.6 kW) @ 2200 RPM 74 HP (55 kW) @ 2200 RPM
    Max Torque 375 Nm @ 1400 RPM 440 Nm @ 1150 RPM
    Displacement 2.80 L 3.0 L
    Battery 12V / 110 Ah 12V
    Alternator NA 130A

    Transmission

    CASE 851 NX JCB 4DX
    Type CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission Easy Shift JCB synchroshuttle transmission

    Steering

    CASE 851 NX JCB 4DX
    Type Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure 140 bar 160 bar

    Steering Turning Circle

    CASE 851 NX JCB 4DX
    Inner Wheels Braked - Outside Loader Bucket 4600 mm (2WD) / 4900 (4WD) 10200 mm
    Inner Wheels Braked - Outside Wheels NA 7610 mm
    Inner Wheels not Braked - Outside Loader Bucket 5500 mm (2WD) / 5600 mm (4WD) 11700 mm
    Inner Wheels not Braked - Outside Wheels NA 9110 mm

    Brakes

    CASE 851 NX JCB 4DX
    Service Hydraulic foot operated, 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance.
    Parking Mechanically actuated calipper type brake pack on rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 851 NX JCB 4DX
    Front 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD) 9 x 16 - 16 PR
    Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    CASE 851 NX JCB 4DX
    Forward- 1st gear 5.7 km/hr 6.2 km/hr
    Reverse- 1st gear 7.0 km/hr 6.2 km/hr
    Forward- 2nd gear 9.3 km/hr 10.1 km/hr
    Reverse- 2nd gear 11.5 km/hr 10.1 km/hr
    Forward- 3rd gear 19.5 km/hr 21.9 km/hr
    Reverse- 3rd gear Not recommended Not recommended
    Forward- 4th gear 34.0 km/hr 40.0 km/hr
    Reverse- 4th gear Not Recommened Not recommended

    Hydraulics

    CASE 851 NX JCB 4DX
    Type Open Center Load Sensing , Variable Displacement Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow 143 L/min 148 L/min @ 2200 RPM
    System Pressure 240 bar 250 bar

    Axles

    CASE 851 NX JCB 4DX
    Rear Axle CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle CNH PS1300 (2WD) / NH 26.17M (4WD) Steer axle; centrally pivoted; with oscillation angle of 16º

    Service Capacities

    CASE 851 NX JCB 4DX
    Fuel Tank 129 L 128 L
    Engine Coolant 10 L 20.5 L
    Engine Oil 8.5 L 15 L
    Hydraulic Tank NA NA
    Hydraulic System 96 L 115 L
    Transmission 18 L (2WD) / 20 L (4WD) 17.5 L
    Rear Axle 17.1 L 20 L

    Excavator Performance

    CASE 851 NX JCB 4DX
    Maximum Digging Depth 4700 mm 5360 mm
    Reach-Ground Level to Rear Wheel Centre 5900 mm 7570 mm
    Reach-Ground Level to Slew Centre 7220 mm 6380 mm
    Reach at Full Height to Slew Centre 2400 mm 2180 mm
    Side Reach to Centre Line of Machine NA NA
    Maximum Working Height 5700 mm 6250 mm
    Maximum Load Over Height 3800 mm 3960 mm
    Bucket Rotation Angle 204° & 160° 185°
    Bucket Digging force 5000 kgf (204°) / 6550 kgf (160°) 6716 kgf
    Arm Digging force 3900 kgf 4551 kgf
    Maximum Lift Capacity 1477 kg 2547 kg
    Standard Bucket Capacity 0.36 / 0.40 m³ 0.40 m³
    Standard Bucket Width NA 940 mm

    Loader Performance

    CASE 851 NX JCB 4DX
    Dump Height 2720 mm 2930 mm
    Load Over Height 3300 mm 3370 mm
    Pin Height 3600 mm 3640 mm
    Pin Forward Reach 240 mm NA
    Reach At Ground 1980 mm 1600 mm
    Maximum Reach at Full Height 1190 mm 1240 mm
    Max Reach Full Height Dumped 760 mm 930 mm
    Below Ground Level Dig Depth 110 mm 130 mm
    Rollback at Ground 33° 43°
    Dump Angle 45° 41°
    Shovel Breakout Force 5000 kgf 6264 mm
    Loader Arm Breakout Force 5250 kgf 5516 mm
    Maximum Payload 2050 kg 1800 kg

    Overall Dimensions And Weight

    CASE 851 NX JCB 4DX
    Machine Weight 7800 kg 8450 kg
    Overall Length 6060 mm 6350 mm
    Wheelbase 2180 mm 2340 mm
    Slew Centre to Rear Axle Centre NA 1190 mm
    Minimum Ground Clearance 380 mm 280 mm
    Slew Ground Clearance NA 330 mm
    Height of Cabin 2830 mm 2870 mm
    Overall Height 3850 mm 4210 mm
    Track Width-Rear 1700 mm 1730 mm
    Track Width-Front 1880 mm 1910 mm
    Width Over Bucket 2280 mm 2440 mm

    CASE 851 NX Vs JCB 4DX Backhoe Loader Specifications

    Engine

    CASE 851 NX JCB 4DX
    Model
    CNH 74 HP JCB 74 HP
    Type
    CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power
    74 HP (54.6 kW) @ 2200 RPM 74 HP (55 kW) @ 2200 RPM
    Max Torque
    375 Nm @ 1400 RPM 440 Nm @ 1150 RPM
    Displacement
    2.80 L 3.0 L
    Battery
    12V / 110 Ah 12V
    Alternator
    NA 130A

    Transmission

    CASE 851 NX JCB 4DX
    Type
    CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission Easy Shift JCB synchroshuttle transmission

    Steering

    CASE 851 NX JCB 4DX
    Type
    Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure
    140 bar 160 bar

    Steering Turning Circle

    CASE 851 NX JCB 4DX
    Inner Wheels Braked - Outside Loader Bucket
    4600 mm (2WD) / 4900 (4WD) 10200 mm
    Inner Wheels Braked - Outside Wheels
    NA 7610 mm
    Inner Wheels not Braked - Outside Loader Bucket
    5500 mm (2WD) / 5600 mm (4WD) 11700 mm
    Inner Wheels not Braked - Outside Wheels
    NA 9110 mm

    Brakes

    CASE 851 NX JCB 4DX
    Service
    Hydraulic foot operated, 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance.
    Parking
    Mechanically actuated calipper type brake pack on rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 851 NX JCB 4DX
    Front
    9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD) 9 x 16 - 16 PR
    Rear
    16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    CASE 851 NX JCB 4DX
    Forward- 1st gear
    5.7 km/hr 6.2 km/hr
    Reverse- 1st gear
    7.0 km/hr 6.2 km/hr
    Forward- 2nd gear
    9.3 km/hr 10.1 km/hr
    Reverse- 2nd gear
    11.5 km/hr 10.1 km/hr
    Forward- 3rd gear
    19.5 km/hr 21.9 km/hr
    Reverse- 3rd gear
    Not recommended Not recommended
    Forward- 4th gear
    34.0 km/hr 40.0 km/hr
    Reverse- 4th gear
    Not Recommened Not recommended

    Hydraulics

    CASE 851 NX JCB 4DX
    Type
    Open Center Load Sensing , Variable Displacement Pump Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow
    143 L/min 148 L/min @ 2200 RPM
    System Pressure
    240 bar 250 bar

    Axles

    CASE 851 NX JCB 4DX
    Rear Axle
    CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle
    CNH PS1300 (2WD) / NH 26.17M (4WD) Steer axle; centrally pivoted; with oscillation angle of 16º

    Service Capacities

    CASE 851 NX JCB 4DX
    Fuel Tank
    129 L 128 L
    Engine Coolant
    10 L 20.5 L
    Engine Oil
    8.5 L 15 L
    Hydraulic Tank
    NA NA
    Hydraulic System
    96 L 115 L
    Transmission
    18 L (2WD) / 20 L (4WD) 17.5 L
    Rear Axle
    17.1 L 20 L

    Excavator Performance

    CASE 851 NX JCB 4DX
    Maximum Digging Depth
    4700 mm 5360 mm
    Reach-Ground Level to Rear Wheel Centre
    5900 mm 7570 mm
    Reach-Ground Level to Slew Centre
    7220 mm 6380 mm
    Reach at Full Height to Slew Centre
    2400 mm 2180 mm
    Side Reach to Centre Line of Machine
    NA NA
    Maximum Working Height
    5700 mm 6250 mm
    Maximum Load Over Height
    3800 mm 3960 mm
    Bucket Rotation Angle
    204° & 160° 185°
    Bucket Digging force
    5000 kgf (204°) / 6550 kgf (160°) 6716 kgf
    Arm Digging force
    3900 kgf 4551 kgf
    Maximum Lift Capacity
    1477 kg 2547 kg
    Standard Bucket Capacity
    0.36 / 0.40 m³ 0.40 m³
    Standard Bucket Width
    NA 940 mm

    Loader Performance

    CASE 851 NX JCB 4DX
    Dump Height
    2720 mm 2930 mm
    Load Over Height
    3300 mm 3370 mm
    Pin Height
    3600 mm 3640 mm
    Pin Forward Reach
    240 mm NA
    Reach At Ground
    1980 mm 1600 mm
    Maximum Reach at Full Height
    1190 mm 1240 mm
    Max Reach Full Height Dumped
    760 mm 930 mm
    Below Ground Level Dig Depth
    110 mm 130 mm
    Rollback at Ground
    33° 43°
    Dump Angle
    45° 41°
    Shovel Breakout Force
    5000 kgf 6264 mm
    Loader Arm Breakout Force
    5250 kgf 5516 mm
    Maximum Payload
    2050 kg 1800 kg

    Overall Dimensions And Weight

    CASE 851 NX JCB 4DX
    Machine Weight
    7800 kg 8450 kg
    Overall Length
    6060 mm 6350 mm
    Wheelbase
    2180 mm 2340 mm
    Slew Centre to Rear Axle Centre
    NA 1190 mm
    Minimum Ground Clearance
    380 mm 280 mm
    Slew Ground Clearance
    NA 330 mm
    Height of Cabin
    2830 mm 2870 mm
    Overall Height
    3850 mm 4210 mm
    Track Width-Rear
    1700 mm 1730 mm
    Track Width-Front
    1880 mm 1910 mm
    Width Over Bucket
    2280 mm 2440 mm

    Popular Comparisons with CASE 851 NX

    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Popular Comparisons with JCB 4DX

    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Frequently Asked Question

    Ans.

    The JCB 4DX is easier to sell in most areas. JCB is the most common backhoe brand in India, so more people want to buy or rent it. You can sell it fast and get a fair price. The Case 851 NX also sells, but fewer buyers look for it. Where a Case dealer is near, it sells well too. If you want the easiest sale later, JCB is the safer choice.

    Ans.

    The Case 851 NX usually uses less fuel. It is lighter than the JCB 4DX, so the engine works less on flat and hard ground. Less fuel means lower cost every day. Over many months this saving adds up. If most of your work is on roads, yards, or town sites, the lighter Case will cost you less to run.

    Ans.

    For JCB, yes, almost everywhere in India. JCB has the biggest service network, so parts come fast and most drivers already know the machine. For Case, parts and service are good in many places, but not in every small town. Before you buy, check which brand has a service centre near your work. The near brand will fix your machine faster and cost you less waiting time.

    Ans.

    Take 4WD if your ground is wet, soft, or sloped. It has more grip and power there. Take 2WD if you work on hard, flat ground in towns, roads, or yards. It is lighter and saves fuel. Both the Case 851 NX and the JCB 4DX come in 2WD and 4WD. Do not pay extra for 4WD if you will not use it.

    Ans.

    Yes, very easily. Banks, finance companies, and both Case and JCB dealers give loans for these machines. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders first. Do not take the first EMI offer.

    Ans.

    Choose the Case 851 NX for daily loading, road work, and jobs where low fuel cost matters most. Choose the JCB 4DX for deep digging, drain work, and big sites where you need more reach and lift. Both do all backhoe jobs. The difference is which one you want to be best at your main work.

    CASE 851 NX Vs JCB 4DX - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 851 NX Vs JCB 4DX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare