Shantui SD16E vs BEML BD85: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 160 HP vs BEML 230 HP), Price (₹70 – 85 Lakh vs ₹80 – 95 Lakh), Operating Weight (16,890 kg vs 24,340 kg), Weight (16890 kg vs 24340 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui SD16E
BEML BD85
Shantui SD16E
VS
BEML BD85
Dozer
Shantui SD16E vs BEML BD85: the two differ on 67 of 77 listed specs. The main differences are Engine (Weichai 160 HP vs BEML 230 HP), Price (₹70 – 85 Lakh vs ₹80 – 95 Lakh), Operating Weight (16,890 kg vs 24,340 kg), Weight (16890 kg vs 24340 kg). The other 10 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui SD16E
₹70 – 85 Lakh
BEML BD85
₹80 – 95 Lakh
Particulars
Shantui SD16E
BEML BD85
BEML BD85 vs Shantui SD16E: which construction dozer fits your site?
The BEML BD85 and the Shantui SD16E share the same 4.5 m³ blade capacity, so both move a similar volume of soil per pass. Beyond that, they part ways. The BD85 is the bigger machine at 230 HP against the SD16E's 160 HP, it is far heavier, and its drawbar pull, top speed and ground bearing pressure are all better, so it pushes harder and sits lighter on soft ground. The SD16E answers with a lighter footprint and a lower price band, and its optional ripper reaches deeper into hard patches than the BD85's ripper spec.
Contractors doing heavier earthwork on public-sector or highway projects, where pushing force and local support matter, can lean toward the BD85. Rental fleets and infrastructure contractors working predictable, established ground can look at the lighter SD16E. Both sit in the construction dozers range; check the bulldozer guide or the full dozer lineup before deciding.
BEML BD85
Pros:
Much more engine power and torque at 230 HP
Higher drawbar pull and top speed than the SD16E
Lower ground bearing pressure, so it sits better on soft ground
Optional AC cabin, which the SD16E does not offer
Cons:
Heavier machine, so it needs more fuel to run through long shifts
Older mechanically governed engine and transmission
Costs more to run than the lighter SD16E on straightforward jobs
Shantui SD16E
Pros:
Same 4.5 m³ blade capacity as the heavier BD85
Lighter machine, which can suit smaller sites and lower running costs
Optional ripper reaches deeper into hard ground than the BD85's ripper
Simple, widely produced platform with common parts across the region
Cons:
Less engine power and torque than the BD85
Lower drawbar pull and slower top speed
Higher ground bearing pressure, so it sinks more on soft ground
No AC cabin option
Pros:
Cons:
Closing Recommendation
The BEML BD85 suits contractors handling heavier public-sector or highway earthwork who need more pushing force and better flotation on soft ground. The Shantui SD16E suits rental fleets and infrastructure contractors working on firmer, more predictable ground who want a lighter, simpler machine. So match the machine to your work: BEML BD85 for heavier earthwork on mixed ground, Shantui SD16E for steady grading on established sites.
Shantui SD16E Vs BEML BD85 Dozer Price, Technical Specifications & Features
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
The BEML BD85 is a 24.3-tonne construction crawler dozer powered by a 230 HP engine. Its 4.5 m³ blade allows larger cuts to be moved in fewer passes, while the 392 kN drawbar pull provides strong pushing force through dense subgrade. A multi-shank ripper is available when softer rock or harder ground needs additional breaking. Ground bearing pressure is about 66 kPa, helping the machine remain planted during earthwork. Its 420-litre fuel tank supports long working shifts, and 400 mm of ground clearance suits standard construction conditions. The blade range includes straight-tilt, angle, semi-U and coal configurations. The semi-U blade reaches 7.5 m³, while the coal blade reaches 10.1 m³ for higher-volume handling. The BD85 is the largest construction-class model in BEML's range before the mining machines begin. That makes it suitable for highway contractors and larger site-development projects that need more output than the BD80. The BEML BD85 bulldozer price is ₹80 lakh to ₹95 lakh. A contractor handling larger earthwork can consider this dozer machine where stronger pushing capability affects daily production. Its size gives buyers a step up in construction capacity without moving directly into mining-class equipment.
Agency review
Planning to buy the Shantui SD16E Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the BEML BD85 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
BEML BD85 vs Shantui SD16E: which construction dozer fits your site?
The BEML BD85 and the Shantui SD16E share the same 4.5 m³ blade capacity, so both move a similar volume of soil per pass. Beyond that, they part ways. The BD85 is the bigger machine at 230 HP against the SD16E's 160 HP, it is far heavier, and its drawbar pull, top speed and ground bearing pressure are all better, so it pushes harder and sits lighter on soft ground. The SD16E answers with a lighter footprint and a lower price band, and its optional ripper reaches deeper into hard patches than the BD85's ripper spec.
Contractors doing heavier earthwork on public-sector or highway projects, where pushing force and local support matter, can lean toward the BD85. Rental fleets and infrastructure contractors working predictable, established ground can look at the lighter SD16E. Both sit in the construction dozers range; check the bulldozer guide or the full dozer lineup before deciding.
BEML BD85
Pros:
Much more engine power and torque at 230 HP
Higher drawbar pull and top speed than the SD16E
Lower ground bearing pressure, so it sits better on soft ground
Optional AC cabin, which the SD16E does not offer
Cons:
Heavier machine, so it needs more fuel to run through long shifts
Older mechanically governed engine and transmission
Costs more to run than the lighter SD16E on straightforward jobs
Shantui SD16E
Pros:
Same 4.5 m³ blade capacity as the heavier BD85
Lighter machine, which can suit smaller sites and lower running costs
Optional ripper reaches deeper into hard ground than the BD85's ripper
Simple, widely produced platform with common parts across the region
Cons:
Less engine power and torque than the BD85
Lower drawbar pull and slower top speed
Higher ground bearing pressure, so it sinks more on soft ground
No AC cabin option
Pros:
Cons:
Closing Recommendation
The BEML BD85 suits contractors handling heavier public-sector or highway earthwork who need more pushing force and better flotation on soft ground. The Shantui SD16E suits rental fleets and infrastructure contractors working on firmer, more predictable ground who want a lighter, simpler machine. So match the machine to your work: BEML BD85 for heavier earthwork on mixed ground, Shantui SD16E for steady grading on established sites.
Shantui SD16E Vs BEML BD85 Dozer Price, Technical Specifications & Features
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
The BEML BD85 is a 24.3-tonne construction crawler dozer powered by a 230 HP engine. Its 4.5 m³ blade allows larger cuts to be moved in fewer passes, while the 392 kN drawbar pull provides strong pushing force through dense subgrade. A multi-shank ripper is available when softer rock or harder ground needs additional breaking. Ground bearing pressure is about 66 kPa, helping the machine remain planted during earthwork. Its 420-litre fuel tank supports long working shifts, and 400 mm of ground clearance suits standard construction conditions. The blade range includes straight-tilt, angle, semi-U and coal configurations. The semi-U blade reaches 7.5 m³, while the coal blade reaches 10.1 m³ for higher-volume handling. The BD85 is the largest construction-class model in BEML's range before the mining machines begin. That makes it suitable for highway contractors and larger site-development projects that need more output than the BD80. The BEML BD85 bulldozer price is ₹80 lakh to ₹95 lakh. A contractor handling larger earthwork can consider this dozer machine where stronger pushing capability affects daily production. Its size gives buyers a step up in construction capacity without moving directly into mining-class equipment.
Questions buyers ask about the Shantui SD16E vs BEML BD85
Ans.
Yes, both carry a 4.5 m³ blade, so they move a similar volume of material per pass. The BD85's blade stands taller, while the SD16E's is a little wider, so the working profile differs slightly even at the same capacity.
Ans.
The BEML BD85 is more powerful. It runs a 230 HP engine against the SD16E's 160 HP, with more torque and a higher drawbar pull. It also carries far more operating weight, which adds to its pushing force.
Ans.
The BEML BD85 has a lower ground bearing pressure than the SD16E, so it sinks less on soft or loose fill. The SD16E suits firmer, more settled ground better.
Ans.
Its lighter build and simpler mechanical layout can keep running costs down for straightforward grading work. The BD85 costs more to run on long, high-load shifts but returns more pushing power and speed for the fuel it uses.
Ans.
Yes, both offer an optional ripper. The SD16E's 3-shank ripper reaches deeper into the ground than the BD85's multi-shank ripper, which helps when a grading job runs into harder patches.
Shantui SD16E Vs BEML BD85 - Compare Price & Availability Across 600+ Locations in India
Compare Shantui SD16E Vs BEML BD85 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
