Contact Us



    Your Captcha*

    captcha

    Chat with us

    BEML BL9H 4x2 VS CASE 770 NX Magnum Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights BEML BL9H 4x2CASE 770 NX Magnum
    BEML BL9H 4x2 VS CASE 770 NX Magnum Backhoe Loader
    BL9H Backhoe Loader Price
    BEML BL9H 4x2

    ₹30 - 32 lakhs

    CASE 770 Backhoe Loader
    CASE 770 NX Magnum

    ₹ 33- 36 Lakhs

    Particulars BEML BL9H 4x2 CASE 770 NX Magnum

    Overview Summary

    The CASE 770 NX Magnum CEV5 is designed to meet stringent emissions standards and is well-equipped with features like an AC cabin and GPS as standard, suited for operators looking for a tech-friendly and robust machine. On the other hand, the BEML BL9H 4x2 is tailored for higher shovel capacity and speed, offering a slightly powerful alternator and larger fluid capacities which may allow for longer operation periods.

    CASE 770 NX Magnum CEV5

    Pros:

    • CEV Stage V norms compliance ensures lower emissions
    • Relatively powerful engine with a maximum torque of 375 Nm at 1400 RPM
    • Standard AC Cabin and GPS for operator comfort and efficiency
    • Higher bucket digging force of 5250 kgf or 6550 kgf depending on bucket rotation angle
    • Good lifting capacity with 1477 kg excavator maximum lift capacity

    Cons:

    • Lesser shovel capacity when compared with BEML BL9H 4x2 (1.1 m³ vs 1.20 m³)
    • Higher machine weight could present challenges in certain work environments
    • Efficiency and top speeds in gears 3 and 4 are not recommended for reverse, limiting maneuverability

    BEML BL9H 4x2

    Pros:

    • Higher standard shovel capacity of 1.20 m³
    • More powerful alternator with 90A output
    • Larger fuel and engine oil capacities can potentially offer longer operation hours
    • Slightly higher maximum speed at 39 km/hr compared to 34 km/hr for CASE 770 NX Magnum CEV5

    Cons:

    • GPS not available, limiting technology integration
    • No specification on excavator maximum lift capacity
    • Maximum torque output is lower at 304 Nm @ 1500 rpm

    Pros:

    Cons:

    Closing Recommendation

    The right machine for you depends on your specific requirements. If environmental standards and operator amenities are a priority, the CASE 770 NX Magnum CEV5 could be more suitable. Conversely, if you prioritize shovel capacity and longer operational readiness, the BEML BL9H 4x2 may be the right choice, especially in settings where GPS and tech integrations are less critical.

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Price, Technical Specifications & Features

    Brand BEML Backhoe loader CASE Backhoe Loader
    Type 2WD 2WD/4WD
    Price ₹30 - 32 lakhs ₹ 33- 36 Lakhs
    Engine Koel 74 HP CNH 74 HP
    Bucket 0.24 m³ 0.30 m³
    Shovel 1.20 m³ 1.1 m³
    Max Digging Depth 4585 mm 4700 mm
    Max Dump Height 2700 mm 2730 mm
    Weight 7600 Kg 7700 kg
    Quick Overview:

    Focused on efficiency and everyday construction needs, the BL9H 4×2 Backhoe Loader from BEML offers a practical solution for excavation, loading, and material handling in urban and mid-scale projects in India. It runs on a KOEL diesel engine that produces around 76 HP and approximately 300 Nm of torque, delivering smooth and fuel-efficient performance. With a working weight of about 7600 kg, the machine operates stably during routine site tasks. Its 2WD configuration improves maneuverability in tight spaces, while the hydraulic system ensures consistent digging and loading performance. The price of the BEML BL9H 4×2 in India ranges between ₹30 and 32 lakhs. This backhoe loader is cost-effective for contractors who seek reliable performance and easy operation.

    The CASE 770 NX Magnum Backhoe Loader is a premium version designed for higher productivity, smoother operation, and better operator experience. It comes with a 74 HP engine and features advanced hydraulic modes, which enhance efficiency during heavy-duty tasks. The machine has a quiet cabin, better visibility, and smart telematics, making it suited for long working hours and continuous operations. With improved digging capability and the optional Extendahoe for added reach, it handles demanding tasks more effectively. Its sturdy build and modern design ensure durability and reduce maintenance needs. The price of 770 NX Magnum backhoe loader from CASE in India generally ranges from ₹33 to 33 lakh, making it a strong opti4on for contractors focused on performance and comfort.

    Overview Summary

    The CASE 770 NX Magnum CEV5 is designed to meet stringent emissions standards and is well-equipped with features like an AC cabin and GPS as standard, suited for operators looking for a tech-friendly and robust machine. On the other hand, the BEML BL9H 4x2 is tailored for higher shovel capacity and speed, offering a slightly powerful alternator and larger fluid capacities which may allow for longer operation periods.

    CASE 770 NX Magnum CEV5

    Pros:

    • CEV Stage V norms compliance ensures lower emissions
    • Relatively powerful engine with a maximum torque of 375 Nm at 1400 RPM
    • Standard AC Cabin and GPS for operator comfort and efficiency
    • Higher bucket digging force of 5250 kgf or 6550 kgf depending on bucket rotation angle
    • Good lifting capacity with 1477 kg excavator maximum lift capacity

    Cons:

    • Lesser shovel capacity when compared with BEML BL9H 4x2 (1.1 m³ vs 1.20 m³)
    • Higher machine weight could present challenges in certain work environments
    • Efficiency and top speeds in gears 3 and 4 are not recommended for reverse, limiting maneuverability

    BEML BL9H 4x2

    Pros:

    • Higher standard shovel capacity of 1.20 m³
    • More powerful alternator with 90A output
    • Larger fuel and engine oil capacities can potentially offer longer operation hours
    • Slightly higher maximum speed at 39 km/hr compared to 34 km/hr for CASE 770 NX Magnum CEV5

    Cons:

    • GPS not available, limiting technology integration
    • No specification on excavator maximum lift capacity
    • Maximum torque output is lower at 304 Nm @ 1500 rpm

    Pros:

    Cons:

    Closing Recommendation

    The right machine for you depends on your specific requirements. If environmental standards and operator amenities are a priority, the CASE 770 NX Magnum CEV5 could be more suitable. Conversely, if you prioritize shovel capacity and longer operational readiness, the BEML BL9H 4x2 may be the right choice, especially in settings where GPS and tech integrations are less critical.

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Price, Technical Specifications & Features

    BEML BL9H 4×2 CASE 770 NX Magnum
    Brand
    BEML Backhoe loader CASE Backhoe Loader
    Type
    2WD 2WD/4WD
    Price
    ₹30 - 32 lakhs ₹ 33- 36 Lakhs
    Engine
    Koel 74 HP CNH 74 HP
    Bucket
    0.24 m³ 0.30 m³
    Shovel
    1.20 m³ 1.1 m³
    Max Digging Depth
    4585 mm 4700 mm
    Max Dump Height
    2700 mm 2730 mm
    Weight
    7600 Kg 7700 kg
    Quick Overview:

    Focused on efficiency and everyday construction needs, the BL9H 4×2 Backhoe Loader from BEML offers a practical solution for excavation, loading, and material handling in urban and mid-scale projects in India. It runs on a KOEL diesel engine that produces around 76 HP and approximately 300 Nm of torque, delivering smooth and fuel-efficient performance. With a working weight of about 7600 kg, the machine operates stably during routine site tasks. Its 2WD configuration improves maneuverability in tight spaces, while the hydraulic system ensures consistent digging and loading performance. The price of the BEML BL9H 4×2 in India ranges between ₹30 and 32 lakhs. This backhoe loader is cost-effective for contractors who seek reliable performance and easy operation.

    The CASE 770 NX Magnum Backhoe Loader is a premium version designed for higher productivity, smoother operation, and better operator experience. It comes with a 74 HP engine and features advanced hydraulic modes, which enhance efficiency during heavy-duty tasks. The machine has a quiet cabin, better visibility, and smart telematics, making it suited for long working hours and continuous operations. With improved digging capability and the optional Extendahoe for added reach, it handles demanding tasks more effectively. Its sturdy build and modern design ensure durability and reduce maintenance needs. The price of 770 NX Magnum backhoe loader from CASE in India generally ranges from ₹33 to 33 lakh, making it a strong opti4on for contractors focused on performance and comfort.

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Key Highlights

    BEML BL9H 4×2 CASE 770 NX Magnum
    Engine Make Koel 4R1190NA1 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank 135 L 129 L
    Max Torque 304 Nm @ 1500 rpm 375 Nm @ 1400 RPM
    Max Speed 39 km/hr 34.0 km/hr
    Hydraulic System NA 96 L
    Max Working Height 5880 mm 5700 mm
    Excavator Max Lift Capacity NA 1477 kg
    Loader Load Over Height 4025 mm 3800 mm
    Overall Length 6270 mm 5960 mm
    Wheel Base NA 2180 mm
    Bucket Digging Force 5557 kgf 5250 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force 5894 kgf 5650 kgf
    Warranty 1 Yr. / 2500 hr. 1 Year
    AC Cabin Optional Standard
    GPS Not Available Standard

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Key Highlights

    BEML BL9H 4×2 CASE 770 NX Magnum
    Engine Make
    Koel 4R1190NA1 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank
    135 L 129 L
    Max Torque
    304 Nm @ 1500 rpm 375 Nm @ 1400 RPM
    Max Speed
    39 km/hr 34.0 km/hr
    Hydraulic System
    NA 96 L
    Max Working Height
    5880 mm 5700 mm
    Excavator Max Lift Capacity
    NA 1477 kg
    Loader Load Over Height
    4025 mm 3800 mm
    Overall Length
    6270 mm 5960 mm
    Wheel Base
    NA 2180 mm
    Bucket Digging Force
    5557 kgf 5250 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force
    5894 kgf 5650 kgf
    Warranty
    1 Yr. / 2500 hr. 1 Year
    AC Cabin
    Optional Standard
    GPS
    Not Available Standard

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Specifications

    Engine

    BEML BL9H 4×2 CASE 770 NX Magnum
    Model Koel 74 HP CNH 74 HP
    Type CEV-5 / BS-5 , Naturally Aspirated; 4 Cylinder; Water Cooled; Diesel Engine CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power 74 HP (55 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque 304 Nm @ 1500 rpm 375 Nm @ 1400 RPM
    Displacement 4.76 L 2.80 L
    Battery 12 V / 150Ah 12V / 110 Ah
    Alternator 90A NA

    Transmission

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type Carraro, TCB80, Integral torque converter, 4 forward and 3 reverse speeds, optimally matched with engine. CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type Fully hydrostatic power steering system independent of engine speed Power Steering
    Working Pressure NA 140 bar

    Steering Turning Circle

    BEML BL9H 4×2 CASE 770 NX Magnum
    Inner Wheels Braked - Outside Loader Bucket 13000 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels 10000 mm NA
    Inner Wheels not Braked - Outside Loader Bucket NA 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels NA NA

    Brakes

    BEML BL9H 4×2 CASE 770 NX Magnum
    Service Hydraulically actuated wet multiple disc brake at rear wheels. Hydraulic foot operated, 2 disc per side
    Parking Hand Operated; caliper brake on rear axle. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    BEML BL9H 4×2 CASE 770 NX Magnum
    Front 9.0 x 16, 16 PR 9x16 - 16 PR (2WD) / 12.5 x 18 -12 PR (4WD)
    Rear 16.9 x 28, 12 PR 16.9 x 28 - 12 PR

    Speed

    BEML BL9H 4×2 CASE 770 NX Magnum
    Forward- 1st gear NA 5.7 km/hr
    Reverse- 1st gear NA 7.0 km/hr
    Forward- 2nd gear NA 9.3 km/hr
    Reverse- 2nd gear NA 11.5 km/hr
    Forward- 3rd gear NA 19.5 km/hr
    Reverse- 3rd gear 18 km/hr Not recommended
    Forward- 4th gear 39 km/hr 34.0 km/hr
    Reverse- 4th gear NA Not Recommened

    Hydraulics

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type Gear Pump Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow 110 L/min @ 2200 rpm 143 L/min
    System Pressure 210 bar 250 bar

    Axles

    BEML BL9H 4×2 CASE 770 NX Magnum
    Rear Axle On board rigidly fixed to the frame; 100% differential lock with electro-hydraulic control. CARRARO 28.32M
    Front Axle Non-Drive Steerable CNH PS1300 (2WD) CARARRO / NH 26.17M (4WD

    Service Capacities

    BEML BL9H 4×2 CASE 770 NX Magnum
    Fuel Tank 135 L 129 L
    Engine Coolant 14 L 10 L
    Engine Oil 11.5 L 8.5 L
    Hydraulic Tank 90 L NA
    Hydraulic System NA 96 L
    Transmission 16 L 18 L (2WD) / 20 (4WD)
    Rear Axle 18 L 17.1 L

    Excavator Performance

    BEML BL9H 4×2 CASE 770 NX Magnum
    Maximum Digging Depth 4585 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre NA 7220 mm
    Reach-Ground Level to Slew Centre NA 5900 mm
    Reach at Full Height to Slew Centre NA 2400 mm
    Side Reach to Centre Line of Machine NA NA
    Maximum Working Height 5880 mm 5700 mm
    Maximum Load Over Height 4025 mm 3800 mm
    Bucket Rotation Angle 180° 204° & 160°
    Bucket Digging force 5557 kgf 5250 kgf (204°) / 6550 kgf (160°)
    Arm Digging force 3059 kgf 3900 kgf
    Maximum Lift Capacity NA 1477 kg
    Standard Bucket Capacity 0.24 m³ 0.30 m³
    Standard Bucket Width NA NA

    Loader Performance

    BEML BL9H 4×2 CASE 770 NX Magnum
    Dump Height 2700 mm 2730 mm
    Load Over Height NA 3300 mm
    Pin Height NA 3600 mm
    Pin Forward Reach NA 240 mm
    Reach At Ground NA 1980 mm
    Maximum Reach at Full Height 4360 mm 1190 mm
    Max Reach Full Height Dumped NA 760 mm
    Below Ground Level Dig Depth 150 mm 110 mm
    Rollback at Ground NA 33°
    Dump Angle 45° 45°
    Shovel Breakout Force 5894 kgf 5650 kgf
    Loader Arm Breakout Force 4793 kgf 5450 kgf
    Maximum Payload NA 1925 kg

    Overall Dimensions And Weight

    BEML BL9H 4×2 CASE 770 NX Magnum
    Machine Weight 7600 kg 7700 Kg
    Overall Length 6270 mm 5960 mm
    Wheelbase NA 2180 mm
    Slew Centre to Rear Axle Centre NA NA
    Minimum Ground Clearance NA 380 mm
    Slew Ground Clearance 580 mm NA
    Height of Cabin 3034 mm 2830 mm
    Overall Height 3890 mm 3850 mm
    Track Width-Rear 2452 mm 1700 mm
    Track Width-Front 2240 mm 1880 mm
    Width Over Bucket NA 2280 mm

    BEML BL9H 4x2 Vs CASE 770 NX Magnum Backhoe Loader Specifications

    Engine

    BEML BL9H 4×2 CASE 770 NX Magnum
    Model
    Koel 74 HP CNH 74 HP
    Type
    CEV-5 / BS-5 , Naturally Aspirated; 4 Cylinder; Water Cooled; Diesel Engine CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power
    74 HP (55 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque
    304 Nm @ 1500 rpm 375 Nm @ 1400 RPM
    Displacement
    4.76 L 2.80 L
    Battery
    12 V / 150Ah 12V / 110 Ah
    Alternator
    90A NA

    Transmission

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type
    Carraro, TCB80, Integral torque converter, 4 forward and 3 reverse speeds, optimally matched with engine. CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type
    Fully hydrostatic power steering system independent of engine speed Power Steering
    Working Pressure
    NA 140 bar

    Steering Turning Circle

    BEML BL9H 4×2 CASE 770 NX Magnum
    Inner Wheels Braked - Outside Loader Bucket
    13000 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels
    10000 mm NA
    Inner Wheels not Braked - Outside Loader Bucket
    NA 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels
    NA NA

    Brakes

    BEML BL9H 4×2 CASE 770 NX Magnum
    Service
    Hydraulically actuated wet multiple disc brake at rear wheels. Hydraulic foot operated, 2 disc per side
    Parking
    Hand Operated; caliper brake on rear axle. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    BEML BL9H 4×2 CASE 770 NX Magnum
    Front
    9.0 x 16, 16 PR 9x16 - 16 PR (2WD) / 12.5 x 18 -12 PR (4WD)
    Rear
    16.9 x 28, 12 PR 16.9 x 28 - 12 PR

    Speed

    BEML BL9H 4×2 CASE 770 NX Magnum
    Forward- 1st gear
    NA 5.7 km/hr
    Reverse- 1st gear
    NA 7.0 km/hr
    Forward- 2nd gear
    NA 9.3 km/hr
    Reverse- 2nd gear
    NA 11.5 km/hr
    Forward- 3rd gear
    NA 19.5 km/hr
    Reverse- 3rd gear
    18 km/hr Not recommended
    Forward- 4th gear
    39 km/hr 34.0 km/hr
    Reverse- 4th gear
    NA Not Recommened

    Hydraulics

    BEML BL9H 4×2 CASE 770 NX Magnum
    Type
    Gear Pump Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow
    110 L/min @ 2200 rpm 143 L/min
    System Pressure
    210 bar 250 bar

    Axles

    BEML BL9H 4×2 CASE 770 NX Magnum
    Rear Axle
    On board rigidly fixed to the frame; 100% differential lock with electro-hydraulic control. CARRARO 28.32M
    Front Axle
    Non-Drive Steerable CNH PS1300 (2WD) CARARRO / NH 26.17M (4WD

    Service Capacities

    BEML BL9H 4×2 CASE 770 NX Magnum
    Fuel Tank
    135 L 129 L
    Engine Coolant
    14 L 10 L
    Engine Oil
    11.5 L 8.5 L
    Hydraulic Tank
    90 L NA
    Hydraulic System
    NA 96 L
    Transmission
    16 L 18 L (2WD) / 20 (4WD)
    Rear Axle
    18 L 17.1 L

    Excavator Performance

    BEML BL9H 4×2 CASE 770 NX Magnum
    Maximum Digging Depth
    4585 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre
    NA 7220 mm
    Reach-Ground Level to Slew Centre
    NA 5900 mm
    Reach at Full Height to Slew Centre
    NA 2400 mm
    Side Reach to Centre Line of Machine
    NA NA
    Maximum Working Height
    5880 mm 5700 mm
    Maximum Load Over Height
    4025 mm 3800 mm
    Bucket Rotation Angle
    180° 204° & 160°
    Bucket Digging force
    5557 kgf 5250 kgf (204°) / 6550 kgf (160°)
    Arm Digging force
    3059 kgf 3900 kgf
    Maximum Lift Capacity
    NA 1477 kg
    Standard Bucket Capacity
    0.24 m³ 0.30 m³
    Standard Bucket Width
    NA NA

    Loader Performance

    BEML BL9H 4×2 CASE 770 NX Magnum
    Dump Height
    2700 mm 2730 mm
    Load Over Height
    NA 3300 mm
    Pin Height
    NA 3600 mm
    Pin Forward Reach
    NA 240 mm
    Reach At Ground
    NA 1980 mm
    Maximum Reach at Full Height
    4360 mm 1190 mm
    Max Reach Full Height Dumped
    NA 760 mm
    Below Ground Level Dig Depth
    150 mm 110 mm
    Rollback at Ground
    NA 33°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    5894 kgf 5650 kgf
    Loader Arm Breakout Force
    4793 kgf 5450 kgf
    Maximum Payload
    NA 1925 kg

    Overall Dimensions And Weight

    BEML BL9H 4×2 CASE 770 NX Magnum
    Machine Weight
    7600 kg 7700 Kg
    Overall Length
    6270 mm 5960 mm
    Wheelbase
    NA 2180 mm
    Slew Centre to Rear Axle Centre
    NA NA
    Minimum Ground Clearance
    NA 380 mm
    Slew Ground Clearance
    580 mm NA
    Height of Cabin
    3034 mm 2830 mm
    Overall Height
    3890 mm 3850 mm
    Track Width-Rear
    2452 mm 1700 mm
    Track Width-Front
    2240 mm 1880 mm
    Width Over Bucket
    NA 2280 mm

    Popular Comparisons with BEML BL9H 4x2

    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Popular Comparisons with CASE 770 NX Magnum

    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    BEML BL9H 4x2 Vs CASE 770 NX Magnum - Compare Price & Availability Across 600+ Locations in India

    Compare BEML BL9H 4x2 Vs CASE 770 NX Magnum price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare