CASE 1650L vs SEM 824F: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Weichai 248 HP), Operating Weight (17,960 kg vs 23,730 kg), Weight (17960 kg vs 23730 kg), Fuel Tank (300 L vs NA). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 1650L
SEM 824F
CASE 1650L
VS
SEM 824F
Dozer
CASE 1650L vs SEM 824F: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Weichai 248 HP), Operating Weight (17,960 kg vs 23,730 kg), Weight (17960 kg vs 23730 kg), Fuel Tank (300 L vs NA). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 1650L
₹90 Lakh – 1.10 Cr
SEM 824F
₹90 Lakh – 1.10 Cr
Particulars
CASE 1650L
SEM 824F
CASE 1650L vs SEM 824F: Which Dozer Fits Your Work
The SEM 824F is the largest hydrostatic dozer in SEM's line, with a much bigger blade, more engine power and two ripper choices for tougher digging. It also comes winch-ready for towing and recovery. The CASE 1650L stays in a lighter, mid-size class built around finish grading, and it keeps a lower ground bearing pressure that helps on softer surfaces. The 1650L also lists a standard AC cabin, while the 824F does not state one, offering only an optional coolant heater instead.
Choose the SEM 824F for large-scale production earthwork where blade volume and ripper flexibility matter most. Choose the CASE 1650L when grading precision and driver comfort on long shifts matter more than raw size. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Lower ground bearing pressure for soft or freshly turned ground
Standard AC cabin with an air-suspension seat
Hydrostatic drive with single-lever electronic control for smooth grading
PAT blade for angle and tilt during finish work
Lighter machine, easier to manoeuvre on tighter plots
Cons:
Much smaller blade capacity than the SEM 824F
Ripper reaches less deep than either of the 824F's ripper options
No winch-ready option listed
SEM 824F
Pros:
Much bigger blade capacity for large-scale grading and pushing
Two ripper choices, both reaching deeper into the ground
Winch-ready for towing and recovery on site
Higher engine power for demanding earthmoving
Wide range of blade options for different site conditions
Cons:
No standard AC cabin listed, only an optional coolant heater
Higher ground bearing pressure, less suited to soft or wet fill
Mechanical engine rather than a common-rail design
Larger machine, so less manoeuvrable on tight plots
Pros:
Cons:
Closing Recommendation
Both dozers use hydrostatic drive, but they are built for different scales of work. The CASE 1650L keeps its footprint light, its cabin comfortable and its grading precise, while the SEM 824F brings a much bigger blade, deeper ripper choices and winch readiness for heavier jobs. So match the machine to your work: CASE 1650L for grading-led construction with driver comfort, SEM 824F for large-scale production earthwork and ripping-heavy sites.
CASE 1650L Vs SEM 824F Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The SEM 824F is a 23.7-tonne construction crawler dozer with a 248 HP engine. It combines larger grading capacity with several options for ground-breaking work. A multi-shank ripper reaches 860 mm, while a single-shank configuration reaches 737 mm for a different ripping approach. The machine is also winch-ready, providing an additional towing or recovery function where required. Ground bearing pressure of 63 kPa suits standard construction ground, while rated gradeability reaches 30 degrees. A 380-litre fuel tank supports a full working shift, and ground clearance is 400 mm. The 824F sits close to the SEM 822D in operating weight, so the application and attachment requirement can guide the choice. Large-plot development and general earthwork are suitable uses. The SEM 824F bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors can consider this dozer machine when both grading and ripping form part of regular site work. The different ripper configurations provide flexibility across changing ground conditions. The winch-ready setup can also help on sites where towing or recovery is occasionally required. Its operating weight keeps it within the larger construction category. Buyers looking for a crawler dozer with more application flexibility can consider the 824F for grading, breaking and related site work.
Agency review
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 824F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs SEM 824F: Which Dozer Fits Your Work
The SEM 824F is the largest hydrostatic dozer in SEM's line, with a much bigger blade, more engine power and two ripper choices for tougher digging. It also comes winch-ready for towing and recovery. The CASE 1650L stays in a lighter, mid-size class built around finish grading, and it keeps a lower ground bearing pressure that helps on softer surfaces. The 1650L also lists a standard AC cabin, while the 824F does not state one, offering only an optional coolant heater instead.
Choose the SEM 824F for large-scale production earthwork where blade volume and ripper flexibility matter most. Choose the CASE 1650L when grading precision and driver comfort on long shifts matter more than raw size. Browse more construction dozers or the full dozer lineup.
CASE 1650L
Pros:
Lower ground bearing pressure for soft or freshly turned ground
Standard AC cabin with an air-suspension seat
Hydrostatic drive with single-lever electronic control for smooth grading
PAT blade for angle and tilt during finish work
Lighter machine, easier to manoeuvre on tighter plots
Cons:
Much smaller blade capacity than the SEM 824F
Ripper reaches less deep than either of the 824F's ripper options
No winch-ready option listed
SEM 824F
Pros:
Much bigger blade capacity for large-scale grading and pushing
Two ripper choices, both reaching deeper into the ground
Winch-ready for towing and recovery on site
Higher engine power for demanding earthmoving
Wide range of blade options for different site conditions
Cons:
No standard AC cabin listed, only an optional coolant heater
Higher ground bearing pressure, less suited to soft or wet fill
Mechanical engine rather than a common-rail design
Larger machine, so less manoeuvrable on tight plots
Pros:
Cons:
Closing Recommendation
Both dozers use hydrostatic drive, but they are built for different scales of work. The CASE 1650L keeps its footprint light, its cabin comfortable and its grading precise, while the SEM 824F brings a much bigger blade, deeper ripper choices and winch readiness for heavier jobs. So match the machine to your work: CASE 1650L for grading-led construction with driver comfort, SEM 824F for large-scale production earthwork and ripping-heavy sites.
CASE 1650L Vs SEM 824F Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The SEM 824F is a 23.7-tonne construction crawler dozer with a 248 HP engine. It combines larger grading capacity with several options for ground-breaking work. A multi-shank ripper reaches 860 mm, while a single-shank configuration reaches 737 mm for a different ripping approach. The machine is also winch-ready, providing an additional towing or recovery function where required. Ground bearing pressure of 63 kPa suits standard construction ground, while rated gradeability reaches 30 degrees. A 380-litre fuel tank supports a full working shift, and ground clearance is 400 mm. The 824F sits close to the SEM 822D in operating weight, so the application and attachment requirement can guide the choice. Large-plot development and general earthwork are suitable uses. The SEM 824F bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors can consider this dozer machine when both grading and ripping form part of regular site work. The different ripper configurations provide flexibility across changing ground conditions. The winch-ready setup can also help on sites where towing or recovery is occasionally required. Its operating weight keeps it within the larger construction category. Buyers looking for a crawler dozer with more application flexibility can consider the 824F for grading, breaking and related site work.
Questions buyers ask about the CASE 1650L vs SEM 824F
Ans.
The SEM 824F does. Its blade capacity is close to double the CASE 1650L's, which suits large-scale grading and material-moving work.
Ans.
Not as standard. The spec sheet does not list a factory AC cabin for the 824F, only an optional coolant heater. The CASE 1650L includes a standard AC cabin with an air-suspension seat.
Ans.
It offers two choices: a multi-shank parallelogram ripper or a single-shank ripper, both reaching deeper than the CASE 1650L's optional 3-shank ripper.
Ans.
The CASE 1650L is. Its ground bearing pressure is lower than the SEM 824F's, so it spreads its weight better on loose or freshly worked fill.
Ans.
Yes, it can be fitted for towing and recovery work. The CASE 1650L spec sheet does not list this feature.
Ans.
The CASE 1650L does, since it comes with a standard AC cabin. The SEM 824F does not list AC as standard, which matters more in Indian summer heat than the coolant heater it does offer.
CASE 1650L Vs SEM 824F - Compare Price & Availability Across 600+ Locations in India
Compare CASE 1650L Vs SEM 824F price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
