CASE 1650L vs Shantui SD16E: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Weichai 160 HP), Price (₹90 Lakh – 1.10 Cr vs ₹70 – 85 Lakh), Operating Weight (17,960 kg vs 16,890 kg), Weight (17960 kg vs 16890 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 1650L
Shantui SD16E
CASE 1650L
VS
Shantui SD16E
Dozer
CASE 1650L vs Shantui SD16E: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Weichai 160 HP), Price (₹90 Lakh – 1.10 Cr vs ₹70 – 85 Lakh), Operating Weight (17,960 kg vs 16,890 kg), Weight (17960 kg vs 16890 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 1650L
₹90 Lakh – 1.10 Cr
Shantui SD16E
₹70 – 85 Lakh
Particulars
CASE 1650L
Shantui SD16E
CASE 1650L vs Shantui SD16E: Which Dozer Fits Your Work
The CASE 1650L and the Shantui SD16E use very different drivetrains. The 1650L runs a hydrostatic drive with stepless, single-lever electronic control, while the SD16E uses a conventional powershift with a torque converter and fixed gears, a design built on one of the most widely used dozer platforms worldwide. The SD16E carries a bigger blade and a ripper that reaches deeper than the 1650L's, but it runs a higher ground bearing pressure and does not list an AC cabin.
Choose the SD16E for remote or price-sensitive operations where parts and mechanics need to be available almost anywhere. Choose the CASE 1650L for smoother grading control and cabin comfort on longer shifts. See more machines in our construction dozer range or read the bulldozer buying guide.
CASE 1650L
Pros:
Hydrostatic drive gives stepless, precise speed control
Lower ground bearing pressure despite the heavier weight
Standard AC cabin with an air-suspension seat
PAT blade for angle and tilt during finish grading
Modern common-rail engine design
Cons:
Ripper reaches less deep than the SD16E's
Smaller blade capacity than the SD16E
CASE dozer service network in India is smaller than Shantui's
Shantui SD16E
Pros:
Ripper reaches deeper into the ground
Bigger straight-tilt blade for more material per pass
Built on one of the most widely used dozer platforms worldwide
Wide parts and mechanic availability across India
Slightly higher rated engine power
Cons:
No standard AC cabin listed
Higher ground bearing pressure despite being the lighter machine
Conventional powershift gives less fine control than hydrostatic drive
Mechanical engine is older technology than a common-rail design
Pros:
Cons:
Closing Recommendation
These two dozers represent two different philosophies. The Shantui SD16E leans on a simple, conventional design that is easy to keep running almost anywhere, while the CASE 1650L brings smoother hydrostatic control, a gentler footprint and a more comfortable cabin. So match the machine to your work: CASE 1650L for grading precision and driver comfort, Shantui SD16E for remote or cost-driven earthwork where universal parts support matters most.
CASE 1650L Vs Shantui SD16E Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
Agency review
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Shantui SD16E Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs Shantui SD16E: Which Dozer Fits Your Work
The CASE 1650L and the Shantui SD16E use very different drivetrains. The 1650L runs a hydrostatic drive with stepless, single-lever electronic control, while the SD16E uses a conventional powershift with a torque converter and fixed gears, a design built on one of the most widely used dozer platforms worldwide. The SD16E carries a bigger blade and a ripper that reaches deeper than the 1650L's, but it runs a higher ground bearing pressure and does not list an AC cabin.
Choose the SD16E for remote or price-sensitive operations where parts and mechanics need to be available almost anywhere. Choose the CASE 1650L for smoother grading control and cabin comfort on longer shifts. See more machines in our construction dozer range or read the bulldozer buying guide.
CASE 1650L
Pros:
Hydrostatic drive gives stepless, precise speed control
Lower ground bearing pressure despite the heavier weight
Standard AC cabin with an air-suspension seat
PAT blade for angle and tilt during finish grading
Modern common-rail engine design
Cons:
Ripper reaches less deep than the SD16E's
Smaller blade capacity than the SD16E
CASE dozer service network in India is smaller than Shantui's
Shantui SD16E
Pros:
Ripper reaches deeper into the ground
Bigger straight-tilt blade for more material per pass
Built on one of the most widely used dozer platforms worldwide
Wide parts and mechanic availability across India
Slightly higher rated engine power
Cons:
No standard AC cabin listed
Higher ground bearing pressure despite being the lighter machine
Conventional powershift gives less fine control than hydrostatic drive
Mechanical engine is older technology than a common-rail design
Pros:
Cons:
Closing Recommendation
These two dozers represent two different philosophies. The Shantui SD16E leans on a simple, conventional design that is easy to keep running almost anywhere, while the CASE 1650L brings smoother hydrostatic control, a gentler footprint and a more comfortable cabin. So match the machine to your work: CASE 1650L for grading precision and driver comfort, Shantui SD16E for remote or cost-driven earthwork where universal parts support matters most.
CASE 1650L Vs Shantui SD16E Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The Shantui SD16E is a 16.9-tonne construction crawler dozer powered by a 160 HP engine. Its 4.5 m³ blade handles regular grading and spreading, while an optional 3-shank ripper reaches 572 mm for light breaking. Ground bearing pressure is 74 kPa, making established and reasonably firm sites a better fit. Rated gradeability reaches 30 degrees, supporting regular sloped-site work. Straight-tilt, angle and U-blade configurations provide different working options. A 315-litre fuel tank supports standard shifts, while ground clearance is 320 mm. The SD16E sits close to the DH16B3 and DH17B3, so buyers can compare the specifications against their typical applications. Road-base preparation, site clearing and general construction grading are suitable uses. The Shantui SD16E bulldozer price is ₹70 lakh to ₹85 lakh. Infrastructure contractors working on predictable ground can consider this dozer machine for regular earthwork. The optional ripper provides additional capability without changing the primary grading role. Its operating weight keeps it below heavier construction crawler dozers. Buyers can choose between the available blade configurations according to the material and finishing requirement. The SD16E offers a practical construction option for contractors who need regular grading with occasional light ripping.
69 differ · 8 identical
Key highlights: CASE 1650L vs Shantui SD16E Dozer
CASE 1650L
Shantui SD16E
Engine Make
FPT Industrial F4HE9684U
Weichai WD10G178E25
Rated Engine Power
107 kW (146 HP) @ 2200 rpm
120 kW (160 HP) @ 1850 rpm
Maximum Torque
690 Nm @ 1400 rpm
765 Nm @ 1300 rpm
Max Forward Speed
9.7 km/h
9.63 km/h
Max Drawbar Pull
275 kN
NA
Fuel Tank
300 L
NA
Overall Width
3200 mm
3388-3970 mm
Track Shoe Width
559 mm
560 mm
Ground Bearing Pressure
46.1 kPa
74 kPa
Blade Options
PAT std
Angle, or U blade, Straight Tilt
Ripper
3-shank ripper optional (1600 kg); penetration 478 mm
Questions buyers ask about the CASE 1650L vs Shantui SD16E
Ans.
The drivetrain. The CASE 1650L uses hydrostatic drive for stepless speed control, while the Shantui SD16E uses a conventional powershift transmission with a torque converter and fixed gears.
Ans.
The Shantui SD16E does. Its optional 3-shank ripper reaches deeper into the ground than the CASE 1650L's optional ripper.
Ans.
The CASE 1650L is, even though it is the heavier machine. Its ground bearing pressure is lower than the SD16E's, so it spreads its weight better on loose ground.
Ans.
Yes. It is built on one of the most widely used dozer platforms worldwide, so parts and mechanics familiar with it are easy to find across India.
Ans.
No, the spec sheet does not list one. The CASE 1650L comes with a standard AC cabin and an air-suspension seat.
Ans.
The CASE 1650L does. Its hydrostatic drive gives stepless speed matching, while the SD16E's fixed-gear powershift suits steady pushing more than fine control.
CASE 1650L Vs Shantui SD16E - Compare Price & Availability Across 600+ Locations in India
Compare CASE 1650L Vs Shantui SD16E price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
