CASE 1650L vs Cat D5R2: the two differ on 71 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Cat 174 HP), Price (₹90 Lakh – 1.10 Cr vs ₹95 Lakh – 1.15 Cr), Operating Weight (17,960 kg vs 16,032 kg), Weight (17960 kg vs 16032 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 1650L
Cat D5R2
CASE 1650L
VS
Cat D5R2
Dozer
CASE 1650L vs Cat D5R2: the two differ on 71 of 77 listed specs. The main differences are Engine (FPT 146 HP vs Cat 174 HP), Price (₹90 Lakh – 1.10 Cr vs ₹95 Lakh – 1.15 Cr), Operating Weight (17,960 kg vs 16,032 kg), Weight (17960 kg vs 16032 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 1650L
₹90 Lakh – 1.10 Cr
Cat D5R2
₹95 Lakh – 1.15 Cr
Particulars
CASE 1650L
Cat D5R2
CASE 1650L vs Cat D5R2: which construction dozer fits your site?
The Cat D5R2 is the more powerful machine, at 174 HP against the CASE 1650L's 146 HP, and it also runs a little faster and carries more ground clearance for uneven patches. The 1650L is the heavier machine, with a slightly bigger 3.5 m³ blade against the D5R2's 3.31 m³, and a lower ground bearing pressure, so it sits better on soft ground. The 1650L uses CASE's infinitely variable hydrostatic drive, while the D5R2 runs a proven Cat powershift transmission with an electro-hydraulic VPAT blade for six-way grading control, plus an optional ripper for occasional harder ground.
Contractors who want strong drawbar performance, better flotation and a bigger standard blade can lean toward the 1650L. Contractors who prioritise fine blade control, dealer support and Cat's engine power can look at the D5R2. Both sit in the construction dozers range; check the bulldozer guide or the full dozer lineup before deciding.
CASE 1650L
Pros:
Slightly bigger standard blade at 3.5 m³
Lower ground bearing pressure, so it sits better on soft ground
Heavier machine adds stability during pushing
Infinitely variable hydrostatic drive for smooth speed control
Cons:
Less engine power than the Cat D5R2
Lower ground clearance than the D5R2
Slightly slower top speed
Cat D5R2
Pros:
More engine power at 174 HP
Electro-hydraulic VPAT blade gives six-way grading control
More ground clearance for uneven or rutted ground
Landfill blade variant available for waste-handling work
Cons:
Higher ground bearing pressure, so it sinks more on soft ground
Slightly smaller standard blade than the CASE 1650L
Lighter machine, so it can lose some stability on the heaviest cuts
Pros:
Cons:
Closing Recommendation
The CASE 1650L suits contractors who want a bigger standard blade, better ground flotation and steady hydrostatic control for larger cuts. The Cat D5R2 suits contractors who value fine blade control, extra ground clearance and Cat's dealer support for grading-led work. So match the machine to your work: CASE 1650L for heavier pushing on soft ground, Cat D5R2 for precise finish grading on uneven sites.
CASE 1650L Vs Cat D5R2 Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The Cat D5R2 is a 16-tonne construction crawler dozer with a 174 HP engine and 3.31 m³ blade. Its 54.2 kPa ground bearing pressure suits regular site work, while an optional 3-shank ripper reaches 475 mm for occasional light rock. Pry-out force reaches 125.8 kN for that breaking application. The machine is the smaller of Cat's two listed mid-range construction dozers. Its 299-litre fuel tank supports all-day grading, while ground clearance is 419 mm. The D5R2 focuses on controlled grading and site preparation rather than maximum material volume. SU, angle and VPAT blade configurations provide different working options. A landfill blade variant reaches 5.65 m³ for waste-handling applications. The Cat D5R2 bulldozer price is ₹95 lakh to ₹1.15 crore. Contractors working on smaller site-development projects can consider this dozer machine where blade control and regular grading matter. The optional ripper gives it some flexibility when soil changes to softer rock. Its operating weight remains below the D6R2, making it more suitable for smaller construction areas. Buyers can choose the D5R2 when the larger model would add unnecessary capacity. It provides a balanced combination of engine power, blade control and optional breaking capability for regular construction work.
Agency review
Planning to buy the CASE 1650L Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Cat D5R2 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 1650L vs Cat D5R2: which construction dozer fits your site?
The Cat D5R2 is the more powerful machine, at 174 HP against the CASE 1650L's 146 HP, and it also runs a little faster and carries more ground clearance for uneven patches. The 1650L is the heavier machine, with a slightly bigger 3.5 m³ blade against the D5R2's 3.31 m³, and a lower ground bearing pressure, so it sits better on soft ground. The 1650L uses CASE's infinitely variable hydrostatic drive, while the D5R2 runs a proven Cat powershift transmission with an electro-hydraulic VPAT blade for six-way grading control, plus an optional ripper for occasional harder ground.
Contractors who want strong drawbar performance, better flotation and a bigger standard blade can lean toward the 1650L. Contractors who prioritise fine blade control, dealer support and Cat's engine power can look at the D5R2. Both sit in the construction dozers range; check the bulldozer guide or the full dozer lineup before deciding.
CASE 1650L
Pros:
Slightly bigger standard blade at 3.5 m³
Lower ground bearing pressure, so it sits better on soft ground
Heavier machine adds stability during pushing
Infinitely variable hydrostatic drive for smooth speed control
Cons:
Less engine power than the Cat D5R2
Lower ground clearance than the D5R2
Slightly slower top speed
Cat D5R2
Pros:
More engine power at 174 HP
Electro-hydraulic VPAT blade gives six-way grading control
More ground clearance for uneven or rutted ground
Landfill blade variant available for waste-handling work
Cons:
Higher ground bearing pressure, so it sinks more on soft ground
Slightly smaller standard blade than the CASE 1650L
Lighter machine, so it can lose some stability on the heaviest cuts
Pros:
Cons:
Closing Recommendation
The CASE 1650L suits contractors who want a bigger standard blade, better ground flotation and steady hydrostatic control for larger cuts. The Cat D5R2 suits contractors who value fine blade control, extra ground clearance and Cat's dealer support for grading-led work. So match the machine to your work: CASE 1650L for heavier pushing on soft ground, Cat D5R2 for precise finish grading on uneven sites.
CASE 1650L Vs Cat D5R2 Dozer Price, Technical Specifications & Features
The CASE 1650L is an 18-tonne construction crawler dozer powered by a 146 HP engine. Its 3.5 m³ blade handles regular grading, while the 275 kN drawbar pull gives it useful force through compacted subgrade. Ground bearing pressure remains at 46.1 kPa, helping the machine work across reasonably soft construction surfaces. An optional 3-shank ripper adds around 1.6 tonnes and reaches 478 mm for light breaking work. The machine sits between the 1150L and 2050M, making it a middle option for contractors needing more capacity without the size of the larger model. A 300-litre fuel tank supports standard site shifts, while ground clearance is 347 mm. Plot preparation before foundation work, road-base preparation and general site grading are suitable applications. The CASE 1650L bulldozer price is ₹90 lakh to ₹1.10 crore. A contractor who has outgrown a mini dozer can consider this dozer machine for regular construction work. Its optional ripper also allows occasional breaking without changing the main grading role. Buyers can compare the 1650L against the 1150L when blade volume and operating weight begin affecting daily output. It provides a practical middle position in CASE's construction crawler dozer range.
The Cat D5R2 is a 16-tonne construction crawler dozer with a 174 HP engine and 3.31 m³ blade. Its 54.2 kPa ground bearing pressure suits regular site work, while an optional 3-shank ripper reaches 475 mm for occasional light rock. Pry-out force reaches 125.8 kN for that breaking application. The machine is the smaller of Cat's two listed mid-range construction dozers. Its 299-litre fuel tank supports all-day grading, while ground clearance is 419 mm. The D5R2 focuses on controlled grading and site preparation rather than maximum material volume. SU, angle and VPAT blade configurations provide different working options. A landfill blade variant reaches 5.65 m³ for waste-handling applications. The Cat D5R2 bulldozer price is ₹95 lakh to ₹1.15 crore. Contractors working on smaller site-development projects can consider this dozer machine where blade control and regular grading matter. The optional ripper gives it some flexibility when soil changes to softer rock. Its operating weight remains below the D6R2, making it more suitable for smaller construction areas. Buyers can choose the D5R2 when the larger model would add unnecessary capacity. It provides a balanced combination of engine power, blade control and optional breaking capability for regular construction work.
71 differ · 6 identical
Key highlights: CASE 1650L vs Cat D5R2 Dozer
CASE 1650L
Cat D5R2
Engine Make
FPT Industrial F4HE9684U
Cat C7.1 ACERT
Rated Engine Power
107 kW (146 HP) @ 2200 rpm
130 kW (174 HP) @ 1700 rpm
Maximum Torque
690 Nm @ 1400 rpm
NA
Max Forward Speed
9.7 km/h
10.1 km/h
Max Drawbar Pull
275 kN
NA
Fuel Tank
300 L
299 L
Overall Width
3200 mm
3272 mm
Track Shoe Width
559 mm
560 mm
Ground Bearing Pressure
46.1 kPa
54.2 kPa (XL VPAT, ISO 16754)
Blade Options
PAT std
A, SU, VPAT; LGP VPAT 3.87; Landfill 5.65; Land Clearing 4.56 (m3)
Ripper
3-shank ripper optional (1600 kg); penetration 478 mm
Questions buyers ask about the CASE 1650L vs Cat D5R2
Ans.
The Cat D5R2 is more powerful. It runs 174 HP against the CASE 1650L's 146 HP and also has a slightly higher top speed.
Ans.
The CASE 1650L has the slightly bigger standard blade, at 3.5 m³ against the D5R2's 3.31 m³. The D5R2 does offer a landfill blade variant with more volume for waste-handling work.
Ans.
The CASE 1650L has a lower ground bearing pressure than the D5R2, so it sinks less on soft or freshly filled ground.
Ans.
Yes, the D5R2 has more ground clearance than the 1650L. This helps when crossing rutted or uneven ground on a larger site.
Ans.
The D5R2 uses an electro-hydraulic VPAT blade with six-way adjustment, which suits fine finish grading. The 1650L uses a dual-path hydrostatic drive with a PAT-style blade, which favours steady, repeatable dozing across larger cuts.
CASE 1650L Vs Cat D5R2 - Compare Price & Availability Across 600+ Locations in India
Compare CASE 1650L Vs Cat D5R2 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
