Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    CASE 770 NXe Series VS JCB 4DX Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights CASE 770 NXe SeriesJCB 4DX
    CASE 770 NXe Series VS JCB 4DX Backhoe Loader
    CASE 770 49 HP Price
    CASE 770 NXe Series

    ₹ 22-24 lakh

    JCB 4DX Price
    JCB 4DX

    ₹ 36-40 Lakhs

    Particulars CASE 770 NXe Series JCB 4DX

    CASE 770 NXe Series vs JCB 4DX: Which Backhoe Loader to Buy?

    JCB is the most common backhoe brand across India, so buyers of the JCB 4DX get one of the widest dealer and parts networks in the country, along with GPS built in for fleet tracking. The CASE 770 NXe Series comes from a large global brand and is built to save fuel while it works, with a bigger payload each trip.

    If your job means deep digging for canals, drains or foundations, the JCB 4DX reaches further down. If your main worry is keeping diesel bills low over the years, the CASE fits that need well. A driver used to synchro-shuttle gear shifting will find the JCB's Easy Shift transmission simple to pick up. Both are easy to finance through banks and dealer loans. See the full CASE backhoe loader range and JCB range, or browse all backhoe loaders.

    JCB 4DX Backhoe Loader

    Pros:

    • Powerful CRDi engine with 74 HP gross power
    • Higher torque of 440 Nm
    • Advanced Easy Shift JCB synchroshuttle transmission
    • Increased dig depth of 5360 mm
    • Higher excavator max. lift capacity of 2547 kg
    • GPS as standard feature
    • More efficient with a max pump flow of 148 L/min at 2200 RPM

    Cons:

    • Higher overall weight at 8450 kg which may affect maneuverability
    • Optional AC cabin which might not be standard
    • Lower maximum speed compared to CASE 770 NXe at 40 km/hr

    CASE 770 NXe Series Backhoe Loader

    Pros:

    • Superior fuel efficiency with FPT engine
    • Higher shovel breakout force of 5275 kgf
    • Higher maximum payload capacity of 1925 kg
    • Advanced hydraulics with an Open Center Load Sensing system
    • Higher ground clearance at 380 mm

    Cons:

    • Lower gross power than JCB 4DX at 49.5 HP
    • Lower maximum lift capacity of 1417 kg
    • Lower maximum pump flow of 119 L/min
    • Smaller bucket capacity of 0.26 m³

    Pros:

    Cons:

    Closing Recommendation

    Choose the JCB 4DX when your work needs deep digging, strong lifting and GPS tracking for a fleet. Choose the CASE 770 NXe Series when you want to save on fuel and carry a bigger load each trip. Both come from large, trusted brands with good dealer support. So match the machine to your work: JCB 4DX for deep digging and fleet tracking, CASE 770 NXe Series for fuel savings and bigger loads.

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Price, Technical Specifications & Features

    Brand CASE Backhoe Loader JCB Backhoe Loader
    Type 2WD 2WD/4WD
    Price ₹ 22-24 lakh ₹ 36-40 Lakhs
    Engine FPT 49.5 HP JCB 74 HP
    Bucket 0.26 m³ 0.32 m³
    Shovel 1.1 m³ 1.2 m³
    Max Digging Depth 4400 mm 5360 mm
    Max Dump Height 2720 mm 2930 mm
    Weight 7610 Kg 8450 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    CASE 770 NXe Series vs JCB 4DX: Which Backhoe Loader to Buy?

    JCB is the most common backhoe brand across India, so buyers of the JCB 4DX get one of the widest dealer and parts networks in the country, along with GPS built in for fleet tracking. The CASE 770 NXe Series comes from a large global brand and is built to save fuel while it works, with a bigger payload each trip.

    If your job means deep digging for canals, drains or foundations, the JCB 4DX reaches further down. If your main worry is keeping diesel bills low over the years, the CASE fits that need well. A driver used to synchro-shuttle gear shifting will find the JCB's Easy Shift transmission simple to pick up. Both are easy to finance through banks and dealer loans. See the full CASE backhoe loader range and JCB range, or browse all backhoe loaders.

    JCB 4DX Backhoe Loader

    Pros:

    • Powerful CRDi engine with 74 HP gross power
    • Higher torque of 440 Nm
    • Advanced Easy Shift JCB synchroshuttle transmission
    • Increased dig depth of 5360 mm
    • Higher excavator max. lift capacity of 2547 kg
    • GPS as standard feature
    • More efficient with a max pump flow of 148 L/min at 2200 RPM

    Cons:

    • Higher overall weight at 8450 kg which may affect maneuverability
    • Optional AC cabin which might not be standard
    • Lower maximum speed compared to CASE 770 NXe at 40 km/hr

    CASE 770 NXe Series Backhoe Loader

    Pros:

    • Superior fuel efficiency with FPT engine
    • Higher shovel breakout force of 5275 kgf
    • Higher maximum payload capacity of 1925 kg
    • Advanced hydraulics with an Open Center Load Sensing system
    • Higher ground clearance at 380 mm

    Cons:

    • Lower gross power than JCB 4DX at 49.5 HP
    • Lower maximum lift capacity of 1417 kg
    • Lower maximum pump flow of 119 L/min
    • Smaller bucket capacity of 0.26 m³

    Pros:

    Cons:

    Closing Recommendation

    Choose the JCB 4DX when your work needs deep digging, strong lifting and GPS tracking for a fleet. Choose the CASE 770 NXe Series when you want to save on fuel and carry a bigger load each trip. Both come from large, trusted brands with good dealer support. So match the machine to your work: JCB 4DX for deep digging and fleet tracking, CASE 770 NXe Series for fuel savings and bigger loads.

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Price, Technical Specifications & Features

    CASE 770 NXe Series JCB 4DX
    Brand
    CASE Backhoe Loader JCB Backhoe Loader
    Type
    2WD 2WD/4WD
    Price
    ₹ 22-24 lakh ₹ 36-40 Lakhs
    Engine
    FPT 49.5 HP JCB 74 HP
    Bucket
    0.26 m³ 0.32 m³
    Shovel
    1.1 m³ 1.2 m³
    Max Digging Depth
    4400 mm 5360 mm
    Max Dump Height
    2720 mm 2930 mm
    Weight
    7610 Kg 8450 Kg
    Quick Overview:

    The 770 NXe, is a 49 HP backhoe loader, from CASE which offers superior fuel efficiency, advanced hydraulics, and enhanced operator comfort for maximum productivity.

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Key Highlights

    CASE 770 NXe Series JCB 4DX
    Engine Make FPT S8000 JCB 430
    Fuel Tank 129 L 128 L
    Max Torque 252.2 Nm @ 1200 RPM 440 Nm @ 1150 RPM
    Max Speed 32.4 km/hr 40.0 km/hr
    Hydraulic System 100 L 115 L
    Max Working Height 5490 mm 6250 mm
    Excavator Max Lift Capacity 1417 kg 2547 kg
    Loader Load Over Height 3640 mm 3960 mm
    Overall Length 5880 mm 6350 mm
    Wheel Base 2180 mm 2340 mm
    Bucket Digging Force 5000 kgf 6716 kgf
    Shovel Breakout Force 5275 kgf 6264 mm
    Warranty 1 Year 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Key Highlights

    CASE 770 NXe Series JCB 4DX
    Engine Make
    FPT S8000 JCB 430
    Fuel Tank
    129 L 128 L
    Max Torque
    252.2 Nm @ 1200 RPM 440 Nm @ 1150 RPM
    Max Speed
    32.4 km/hr 40.0 km/hr
    Hydraulic System
    100 L 115 L
    Max Working Height
    5490 mm 6250 mm
    Excavator Max Lift Capacity
    1417 kg 2547 kg
    Loader Load Over Height
    3640 mm 3960 mm
    Overall Length
    5880 mm 6350 mm
    Wheel Base
    2180 mm 2340 mm
    Bucket Digging Force
    5000 kgf 6716 kgf
    Shovel Breakout Force
    5275 kgf 6264 mm
    Warranty
    1 Year 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series JCB 4DX
    Model FPT 49.5 HP JCB 74 HP
    Type BS-III; Water Cooled. CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power 49.5 HP (37 kW) 74 HP (55 kW) @ 2200 RPM
    Max Torque 252.2 Nm @ 1200 RPM 440 Nm @ 1150 RPM
    Displacement 3.9 L 3.0 L
    Battery 12V / 110 Ah 12V
    Alternator NA 130A

    Transmission

    CASE 770 NXe Series JCB 4DX
    Type CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission Easy Shift JCB synchroshuttle transmission

    Steering

    CASE 770 NXe Series JCB 4DX
    Type Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure 140 bar 160 bar

    Steering Turning Circle

    CASE 770 NXe Series JCB 4DX
    Inner Wheels Braked - Outside Loader Bucket 4600 mm 10200 mm
    Inner Wheels Braked - Outside Wheels NA 7610 mm
    Inner Wheels not Braked - Outside Loader Bucket 5550 mm 11700 mm
    Inner Wheels not Braked - Outside Wheels NA 9110 mm

    Brakes

    CASE 770 NXe Series JCB 4DX
    Service Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance.
    Parking Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 770 NXe Series JCB 4DX
    Front 9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    CASE 770 NXe Series JCB 4DX
    Forward- 1st gear 5 km/hr 6.2 km/hr
    Reverse- 1st gear 5.9 km/hr 6.2 km/hr
    Forward- 2nd gear 7.9 km/hr 10.1 km/hr
    Reverse- 2nd gear 9.4 km/hr 10.1 km/hr
    Forward- 3rd gear 16.9 km/hr 21.9 km/hr
    Reverse- 3rd gear 19.8 km/hr Not recommended
    Forward- 4th gear 32.4 km/hr 40.0 km/hr
    Reverse- 4th gear Not recommended Not recommended

    Hydraulics

    CASE 770 NXe Series JCB 4DX
    Type Open Center Load Sensing system; Axial Piston with Electric Displacement Control Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow 119 L/min 148 L/min @ 2200 RPM
    System Pressure 240 bar 250 bar

    Axles

    CASE 770 NXe Series JCB 4DX
    Rear Axle CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16º

    Service Capacities

    CASE 770 NXe Series JCB 4DX
    Fuel Tank 129 L 128 L
    Engine Coolant 20 L 20.5 L
    Engine Oil 8.6 L 15 L
    Hydraulic Tank 48 L NA
    Hydraulic System 100 L 115 L
    Transmission 18 L 17.5 L
    Rear Axle 17.1 L 20 L

    Excavator Performance

    CASE 770 NXe Series JCB 4DX
    Maximum Digging Depth 4400 mm 5360 mm
    Reach-Ground Level to Rear Wheel Centre 6950 mm 7570 mm
    Reach-Ground Level to Slew Centre 5630 mm 6380 mm
    Reach at Full Height to Slew Centre 2150 mm 2180 mm
    Side Reach to Centre Line of Machine NA NA
    Maximum Working Height 5490 mm 6250 mm
    Maximum Load Over Height 3640 mm 3960 mm
    Bucket Rotation Angle 185° 185°
    Bucket Digging force 5000 kgf 6716 kgf
    Arm Digging force 2751 kgf 4551 kgf
    Maximum Lift Capacity 1417 kg 2547 kg
    Standard Bucket Capacity 0.26 m³ 0.40 m³
    Standard Bucket Width NA 940 mm

    Loader Performance

    CASE 770 NXe Series JCB 4DX
    Dump Height 2720 mm 2930 mm
    Load Over Height 3300 mm 3370 mm
    Pin Height 3580 mm 3640 mm
    Pin Forward Reach 240 mm NA
    Reach At Ground 1980 mm 1600 mm
    Maximum Reach at Full Height 1190 mm 1240 mm
    Max Reach Full Height Dumped 760 mm 930 mm
    Below Ground Level Dig Depth 110 mm 130 mm
    Rollback at Ground 33° 43°
    Dump Angle 45° 41°
    Shovel Breakout Force 5275 kgf 6264 mm
    Loader Arm Breakout Force 5110 kgf 5516 mm
    Maximum Payload 1925 kg 1800 kg

    Overall Dimensions And Weight

    CASE 770 NXe Series JCB 4DX
    Machine Weight 7610 kg 8450 kg
    Overall Length 5880 mm 6350 mm
    Wheelbase 2180 mm 2340 mm
    Slew Centre to Rear Axle Centre NA 1190 mm
    Minimum Ground Clearance 380 mm 280 mm
    Slew Ground Clearance NA 330 mm
    Height of Cabin 2880 mm 2870 mm
    Overall Height 3850 mm 4210 mm
    Track Width-Rear 1700 mm 1730 mm
    Track Width-Front 1880 mm 1910 mm
    Width Over Bucket 2280 mm 2440 mm

    CASE 770 NXe Series Vs JCB 4DX Backhoe Loader Specifications

    Engine

    CASE 770 NXe Series JCB 4DX
    Model
    FPT 49.5 HP JCB 74 HP
    Type
    BS-III; Water Cooled. CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF.
    Gross Power
    49.5 HP (37 kW) 74 HP (55 kW) @ 2200 RPM
    Max Torque
    252.2 Nm @ 1200 RPM 440 Nm @ 1150 RPM
    Displacement
    3.9 L 3.0 L
    Battery
    12V / 110 Ah 12V
    Alternator
    NA 130A

    Transmission

    CASE 770 NXe Series JCB 4DX
    Type
    CARRARO 2WD TLB1; 4F-4R Power Shuttle Synchromesh Transmission Easy Shift JCB synchroshuttle transmission

    Steering

    CASE 770 NXe Series JCB 4DX
    Type
    Power Steering Power track steering rod system provides equal turn steering & quick response with less operating force.
    Working Pressure
    140 bar 160 bar

    Steering Turning Circle

    CASE 770 NXe Series JCB 4DX
    Inner Wheels Braked - Outside Loader Bucket
    4600 mm 10200 mm
    Inner Wheels Braked - Outside Wheels
    NA 7610 mm
    Inner Wheels not Braked - Outside Loader Bucket
    5550 mm 11700 mm
    Inner Wheels not Braked - Outside Wheels
    NA 9110 mm

    Brakes

    CASE 770 NXe Series JCB 4DX
    Service
    Hydraulic foot operated; 2 disc per side JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance.
    Parking
    Mechanically actuated caliper type brake pack on Rear axle input shaft Hand operated; disc brakes on rear axle input disc.

    Tyres

    CASE 770 NXe Series JCB 4DX
    Front
    9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear
    16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    CASE 770 NXe Series JCB 4DX
    Forward- 1st gear
    5 km/hr 6.2 km/hr
    Reverse- 1st gear
    5.9 km/hr 6.2 km/hr
    Forward- 2nd gear
    7.9 km/hr 10.1 km/hr
    Reverse- 2nd gear
    9.4 km/hr 10.1 km/hr
    Forward- 3rd gear
    16.9 km/hr 21.9 km/hr
    Reverse- 3rd gear
    19.8 km/hr Not recommended
    Forward- 4th gear
    32.4 km/hr 40.0 km/hr
    Reverse- 4th gear
    Not recommended Not recommended

    Hydraulics

    CASE 770 NXe Series JCB 4DX
    Type
    Open Center Load Sensing system; Axial Piston with Electric Displacement Control Filtration through suction strainer and return line ‘JCB Filtromatic Filter’.
    Maximum Pump Flow
    119 L/min 148 L/min @ 2200 RPM
    System Pressure
    240 bar 250 bar

    Axles

    CASE 770 NXe Series JCB 4DX
    Rear Axle
    CARRARO 28.32M Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box.
    Front Axle
    CNH PS1300 (2WD) Steer axle; centrally pivoted; with oscillation angle of 16º

    Service Capacities

    CASE 770 NXe Series JCB 4DX
    Fuel Tank
    129 L 128 L
    Engine Coolant
    20 L 20.5 L
    Engine Oil
    8.6 L 15 L
    Hydraulic Tank
    48 L NA
    Hydraulic System
    100 L 115 L
    Transmission
    18 L 17.5 L
    Rear Axle
    17.1 L 20 L

    Excavator Performance

    CASE 770 NXe Series JCB 4DX
    Maximum Digging Depth
    4400 mm 5360 mm
    Reach-Ground Level to Rear Wheel Centre
    6950 mm 7570 mm
    Reach-Ground Level to Slew Centre
    5630 mm 6380 mm
    Reach at Full Height to Slew Centre
    2150 mm 2180 mm
    Side Reach to Centre Line of Machine
    NA NA
    Maximum Working Height
    5490 mm 6250 mm
    Maximum Load Over Height
    3640 mm 3960 mm
    Bucket Rotation Angle
    185° 185°
    Bucket Digging force
    5000 kgf 6716 kgf
    Arm Digging force
    2751 kgf 4551 kgf
    Maximum Lift Capacity
    1417 kg 2547 kg
    Standard Bucket Capacity
    0.26 m³ 0.40 m³
    Standard Bucket Width
    NA 940 mm

    Loader Performance

    CASE 770 NXe Series JCB 4DX
    Dump Height
    2720 mm 2930 mm
    Load Over Height
    3300 mm 3370 mm
    Pin Height
    3580 mm 3640 mm
    Pin Forward Reach
    240 mm NA
    Reach At Ground
    1980 mm 1600 mm
    Maximum Reach at Full Height
    1190 mm 1240 mm
    Max Reach Full Height Dumped
    760 mm 930 mm
    Below Ground Level Dig Depth
    110 mm 130 mm
    Rollback at Ground
    33° 43°
    Dump Angle
    45° 41°
    Shovel Breakout Force
    5275 kgf 6264 mm
    Loader Arm Breakout Force
    5110 kgf 5516 mm
    Maximum Payload
    1925 kg 1800 kg

    Overall Dimensions And Weight

    CASE 770 NXe Series JCB 4DX
    Machine Weight
    7610 kg 8450 kg
    Overall Length
    5880 mm 6350 mm
    Wheelbase
    2180 mm 2340 mm
    Slew Centre to Rear Axle Centre
    NA 1190 mm
    Minimum Ground Clearance
    380 mm 280 mm
    Slew Ground Clearance
    NA 330 mm
    Height of Cabin
    2880 mm 2870 mm
    Overall Height
    3850 mm 4210 mm
    Track Width-Rear
    1700 mm 1730 mm
    Track Width-Front
    1880 mm 1910 mm
    Width Over Bucket
    2280 mm 2440 mm

    Popular Comparisons with CASE 770 NXe Series

    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    JCB JCB 2DX
    4.5 rating
    ₹ 27-29 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Popular Comparisons with JCB 4DX

    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Frequently Asked Question

    Ans.

    The JCB 4DX digs deeper for canal or foundation work. Its arm reaches further down than the CASE 770 NXe Series, so it suits jobs that need deep trenches or footing work.

    Ans.

    The CASE 770 NXe Series saves more on diesel over time. Its engine is built for fuel efficiency, so a contractor watching daily running cost may prefer it over the long run.

    Ans.

    The JCB 4DX has an easier gear shift for a new driver. Its Easy Shift transmission lets a driver change direction without using the clutch, which cuts down on stalling while learning.

    Ans.

    The JCB 4DX has the wider dealer network in India. JCB is the most common backhoe brand in the country, so parts and trained mechanics are easy to find in most towns.

    Ans.

    Yes. Banks, finance companies and dealers offer loans for both machines. Your monthly payment depends on your down payment and your credit record, so ask a few lenders and compare first.

    CASE 770 NXe Series Vs JCB 4DX - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 770 NXe Series Vs JCB 4DX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare