Contact Us



    Chat with us

    JCB 4DX VS CASE 851 NX Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights JCB 4DXCASE 851 NX
    JCB 4DX VS CASE 851 NX Backhoe Loader
    JCB 4DX Price
    JCB 4DX

    ₹ 36-40 Lakhs

    CASE 851 NX
    CASE 851 NX

    ₹ 34 - 37 Lakhs

    Particulars JCB 4DX CASE 851 NX

    Case 851 NX vs JCB 4DX: Which One Should You Buy?

    Both machines have the same 74 HP engine. Both dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The Case 851 NX is lighter. It uses less fuel and moves easily on hard, flat ground. It is a good choice if you want low running cost every day. The JCB 4DX is heavier. It digs deeper and lifts higher. It is better for big jobs where you need more reach and more power.

    Before you buy, think about a few simple things. Is there a service centre near you? Which brand can fix your machine faster if it stops? Will it be easy to sell after some years? These things matter more than a few numbers on paper. You can see the full Case backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    JCB 4DX

    Pros:

    • Higher excavator maximum lift capacity of 2547 kg compared to CASE 851 NX
    • Better loader load over height at 3370 mm
    • Slightly higher engine torque with 440 Nm @ 1150 RPM
    • Greater digging depth at 5360 mm enhancing excavation capabilities
    • More advanced braking system with JCB ‘Q’ brakes; oil immersed; multi-disc type
    • Higher battery alternator capacity (130A)
    • Larger standard bucket capacity of 0.40 m³ for the backhoe
    • Faster top speed of 40.0 km/hr for quicker on-site movement

    Cons:

    • The standard shovel capacity is slightly less at 1.2 m³
    • Lower maximum reach at full height compared to CASE 851 NX
    • Lesser dump height at 2930 mm

    CASE 851 NX CEV5

    Pros:

    • Compliance with CEV Emission Stage-V for a cleaner operation
    • Better fuel tank capacity (1-liter additional) than JCB 4DX
    • Bucket rotation angle offers two settings, providing versatility
    • Higher bucket digging force especially at the 160° rotation angle
    • Larger maximum payload of 2050 kg which is beneficial for heavy-duty tasks
    • Improved minimum ground clearance of 380 mm for better maneuverability over rough terrain
    • Greater dump angle of 45° for efficient unloading

    Cons:

    • Lower excavator max lift capacity at 1477 kg
    • Smaller engine displacement at 2.80 L
    • Lesser maximum speed at 34 km/hr reducing quick transits
    • Transmission specs such as Alternator details not available

    Pros:

    Cons:

    Closing Recommendation

    Both backhoes carry the same engine class and sit close in cost, so look at how they work. The JCB 4DX lifts much more with the digging arm and loads higher into trucks. The CASE 851 NX CEV5 uses cleaner engine technology and holds slightly more diesel. So match the machine to your work: JCB 4DX for heavy lifting and high loading, CASE 851 NX CEV5 for clean running and longer hours.

    JCB 4DX Vs CASE 851 NX Backhoe Loader Price, Technical Specifications & Features

    Brand JCB Backhoe Loader CASE Backhoe Loader
    Type 2WD/4WD 2WD/4WD
    Price ₹ 36-40 Lakhs ₹ 34 - 37 Lakhs
    Engine JCB 74 HP CNH 74 HP
    Bucket 0.32 m³ 0.36 m³
    Shovel 1.2 m³ 1.1 m³
    Max Digging Depth 5360 mm 4700 mm
    Max Dump Height 2930 mm 2720 mm
    Weight 8450 Kg 7800 kg
    Quick Overview:

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    Case 851 NX vs JCB 4DX: Which One Should You Buy?

    Both machines have the same 74 HP engine. Both dig and load well. The tables below give you all the numbers. The real question is which one is right for your work. The Case 851 NX is lighter. It uses less fuel and moves easily on hard, flat ground. It is a good choice if you want low running cost every day. The JCB 4DX is heavier. It digs deeper and lifts higher. It is better for big jobs where you need more reach and more power.

    Before you buy, think about a few simple things. Is there a service centre near you? Which brand can fix your machine faster if it stops? Will it be easy to sell after some years? These things matter more than a few numbers on paper. You can see the full Case backhoe range and the JCB backhoe range, or read our backhoe loader buying guide.

    JCB 4DX

    Pros:

    • Higher excavator maximum lift capacity of 2547 kg compared to CASE 851 NX
    • Better loader load over height at 3370 mm
    • Slightly higher engine torque with 440 Nm @ 1150 RPM
    • Greater digging depth at 5360 mm enhancing excavation capabilities
    • More advanced braking system with JCB ‘Q’ brakes; oil immersed; multi-disc type
    • Higher battery alternator capacity (130A)
    • Larger standard bucket capacity of 0.40 m³ for the backhoe
    • Faster top speed of 40.0 km/hr for quicker on-site movement

    Cons:

    • The standard shovel capacity is slightly less at 1.2 m³
    • Lower maximum reach at full height compared to CASE 851 NX
    • Lesser dump height at 2930 mm

    CASE 851 NX CEV5

    Pros:

    • Compliance with CEV Emission Stage-V for a cleaner operation
    • Better fuel tank capacity (1-liter additional) than JCB 4DX
    • Bucket rotation angle offers two settings, providing versatility
    • Higher bucket digging force especially at the 160° rotation angle
    • Larger maximum payload of 2050 kg which is beneficial for heavy-duty tasks
    • Improved minimum ground clearance of 380 mm for better maneuverability over rough terrain
    • Greater dump angle of 45° for efficient unloading

    Cons:

    • Lower excavator max lift capacity at 1477 kg
    • Smaller engine displacement at 2.80 L
    • Lesser maximum speed at 34 km/hr reducing quick transits
    • Transmission specs such as Alternator details not available

    Pros:

    Cons:

    Closing Recommendation

    Both backhoes carry the same engine class and sit close in cost, so look at how they work. The JCB 4DX lifts much more with the digging arm and loads higher into trucks. The CASE 851 NX CEV5 uses cleaner engine technology and holds slightly more diesel. So match the machine to your work: JCB 4DX for heavy lifting and high loading, CASE 851 NX CEV5 for clean running and longer hours.

    JCB 4DX Vs CASE 851 NX Backhoe Loader Price, Technical Specifications & Features

    JCB 4DX CASE 851 NX
    Brand
    JCB Backhoe Loader CASE Backhoe Loader
    Type
    2WD/4WD 2WD/4WD
    Price
    ₹ 36-40 Lakhs ₹ 34 - 37 Lakhs
    Engine
    JCB 74 HP CNH 74 HP
    Bucket
    0.32 m³ 0.36 m³
    Shovel
    1.2 m³ 1.1 m³
    Max Digging Depth
    5360 mm 4700 mm
    Max Dump Height
    2930 mm 2720 mm
    Weight
    8450 Kg 7800 kg
    Quick Overview:

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    JCB 4DX Vs CASE 851 NX Backhoe Loader Key Highlights

    JCB 4DX CASE 851 NX
    Engine Make JCB 430 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank 128 L 129 L
    Max Torque 440 Nm @ 1150 RPM 375 Nm @ 1400 RPM
    Max Speed 40.0 km/hr 34.0 km/hr
    Hydraulic System 115 L 96 L
    Max Working Height 6250 mm 5700 mm
    Excavator Max Lift Capacity 2547 kg 1477 kg
    Loader Load Over Height 3960 mm 3800 mm
    Overall Length 6350 mm 6060 mm
    Wheel Base 2340 mm 2180 mm
    Bucket Digging Force 6716 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force 6264 mm 5000 kgf
    Warranty 1 Yr. / 2000 hr. 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    JCB 4DX Vs CASE 851 NX Backhoe Loader Key Highlights

    JCB 4DX CASE 851 NX
    Engine Make
    JCB 430 CNH Industrial (India) F28-CF28A001A*U
    Fuel Tank
    128 L 129 L
    Max Torque
    440 Nm @ 1150 RPM 375 Nm @ 1400 RPM
    Max Speed
    40.0 km/hr 34.0 km/hr
    Hydraulic System
    115 L 96 L
    Max Working Height
    6250 mm 5700 mm
    Excavator Max Lift Capacity
    2547 kg 1477 kg
    Loader Load Over Height
    3960 mm 3800 mm
    Overall Length
    6350 mm 6060 mm
    Wheel Base
    2340 mm 2180 mm
    Bucket Digging Force
    6716 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Shovel Breakout Force
    6264 mm 5000 kgf
    Warranty
    1 Yr. / 2000 hr. 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    JCB 4DX Vs CASE 851 NX Backhoe Loader Specifications

    Engine

    JCB 4DX CASE 851 NX
    Model JCB 74 HP CNH 74 HP
    Type CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF. CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power 74 HP (55 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque 440 Nm @ 1150 RPM 375 Nm @ 1400 RPM
    Displacement 3.0 L 2.80 L
    Battery 12V 12V / 110 Ah
    Alternator 130A NA

    Transmission

    JCB 4DX CASE 851 NX
    Type Easy Shift JCB synchroshuttle transmission CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    JCB 4DX CASE 851 NX
    Type Power track steering rod system provides equal turn steering & quick response with less operating force. Power Steering
    Working Pressure 160 bar 140 bar

    Steering Turning Circle

    JCB 4DX CASE 851 NX
    Inner Wheels Braked - Outside Loader Bucket 10200 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels 7610 mm NA
    Inner Wheels not Braked - Outside Loader Bucket 11700 mm 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels 9110 mm NA

    Brakes

    JCB 4DX CASE 851 NX
    Service JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance. Hydraulic foot operated, 2 disc per side
    Parking Hand operated; disc brakes on rear axle input disc. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    JCB 4DX CASE 851 NX
    Front 9 x 16 - 16 PR 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD)
    Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    JCB 4DX CASE 851 NX
    Forward- 1st gear 6.2 km/hr 5.7 km/hr
    Reverse- 1st gear 6.2 km/hr 7.0 km/hr
    Forward- 2nd gear 10.1 km/hr 9.3 km/hr
    Reverse- 2nd gear 10.1 km/hr 11.5 km/hr
    Forward- 3rd gear 21.9 km/hr 19.5 km/hr
    Reverse- 3rd gear Not recommended Not recommended
    Forward- 4th gear 40.0 km/hr 34.0 km/hr
    Reverse- 4th gear Not recommended Not Recommened

    Hydraulics

    JCB 4DX CASE 851 NX
    Type Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow 148 L/min @ 2200 RPM 143 L/min
    System Pressure 250 bar 240 bar

    Axles

    JCB 4DX CASE 851 NX
    Rear Axle Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle Steer axle; centrally pivoted; with oscillation angle of 16º CNH PS1300 (2WD) / NH 26.17M (4WD)

    Service Capacities

    JCB 4DX CASE 851 NX
    Fuel Tank 128 L 129 L
    Engine Coolant 20.5 L 10 L
    Engine Oil 15 L 8.5 L
    Hydraulic Tank NA NA
    Hydraulic System 115 L 96 L
    Transmission 17.5 L 18 L (2WD) / 20 L (4WD)
    Rear Axle 20 L 17.1 L

    Excavator Performance

    JCB 4DX CASE 851 NX
    Maximum Digging Depth 5360 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre 7570 mm 5900 mm
    Reach-Ground Level to Slew Centre 6380 mm 7220 mm
    Reach at Full Height to Slew Centre 2180 mm 2400 mm
    Side Reach to Centre Line of Machine NA NA
    Maximum Working Height 6250 mm 5700 mm
    Maximum Load Over Height 3960 mm 3800 mm
    Bucket Rotation Angle 185° 204° & 160°
    Bucket Digging force 6716 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Arm Digging force 4551 kgf 3900 kgf
    Maximum Lift Capacity 2547 kg 1477 kg
    Standard Bucket Capacity 0.40 m³ 0.36 / 0.40 m³
    Standard Bucket Width 940 mm NA

    Loader Performance

    JCB 4DX CASE 851 NX
    Dump Height 2930 mm 2720 mm
    Load Over Height 3370 mm 3300 mm
    Pin Height 3640 mm 3600 mm
    Pin Forward Reach NA 240 mm
    Reach At Ground 1600 mm 1980 mm
    Maximum Reach at Full Height 1240 mm 1190 mm
    Max Reach Full Height Dumped 930 mm 760 mm
    Below Ground Level Dig Depth 130 mm 110 mm
    Rollback at Ground 43° 33°
    Dump Angle 41° 45°
    Shovel Breakout Force 6264 mm 5000 kgf
    Loader Arm Breakout Force 5516 mm 5250 kgf
    Maximum Payload 1800 kg 2050 kg

    Overall Dimensions And Weight

    JCB 4DX CASE 851 NX
    Machine Weight 8450 kg 7800 kg
    Overall Length 6350 mm 6060 mm
    Wheelbase 2340 mm 2180 mm
    Slew Centre to Rear Axle Centre 1190 mm NA
    Minimum Ground Clearance 280 mm 380 mm
    Slew Ground Clearance 330 mm NA
    Height of Cabin 2870 mm 2830 mm
    Overall Height 4210 mm 3850 mm
    Track Width-Rear 1730 mm 1700 mm
    Track Width-Front 1910 mm 1880 mm
    Width Over Bucket 2440 mm 2280 mm

    JCB 4DX Vs CASE 851 NX Backhoe Loader Specifications

    Engine

    JCB 4DX CASE 851 NX
    Model
    JCB 74 HP CNH 74 HP
    Type
    CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF. CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection
    Gross Power
    74 HP (55 kW) @ 2200 RPM 74 HP (54.6 kW) @ 2200 RPM
    Max Torque
    440 Nm @ 1150 RPM 375 Nm @ 1400 RPM
    Displacement
    3.0 L 2.80 L
    Battery
    12V 12V / 110 Ah
    Alternator
    130A NA

    Transmission

    JCB 4DX CASE 851 NX
    Type
    Easy Shift JCB synchroshuttle transmission CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission

    Steering

    JCB 4DX CASE 851 NX
    Type
    Power track steering rod system provides equal turn steering & quick response with less operating force. Power Steering
    Working Pressure
    160 bar 140 bar

    Steering Turning Circle

    JCB 4DX CASE 851 NX
    Inner Wheels Braked - Outside Loader Bucket
    10200 mm 4600 mm (2WD) / 4900 (4WD)
    Inner Wheels Braked - Outside Wheels
    7610 mm NA
    Inner Wheels not Braked - Outside Loader Bucket
    11700 mm 5500 mm (2WD) / 5600 mm (4WD)
    Inner Wheels not Braked - Outside Wheels
    9110 mm NA

    Brakes

    JCB 4DX CASE 851 NX
    Service
    JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance. Hydraulic foot operated, 2 disc per side
    Parking
    Hand operated; disc brakes on rear axle input disc. Mechanically actuated calipper type brake pack on rear axle input shaft

    Tyres

    JCB 4DX CASE 851 NX
    Front
    9 x 16 - 16 PR 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD)
    Rear
    16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    JCB 4DX CASE 851 NX
    Forward- 1st gear
    6.2 km/hr 5.7 km/hr
    Reverse- 1st gear
    6.2 km/hr 7.0 km/hr
    Forward- 2nd gear
    10.1 km/hr 9.3 km/hr
    Reverse- 2nd gear
    10.1 km/hr 11.5 km/hr
    Forward- 3rd gear
    21.9 km/hr 19.5 km/hr
    Reverse- 3rd gear
    Not recommended Not recommended
    Forward- 4th gear
    40.0 km/hr 34.0 km/hr
    Reverse- 4th gear
    Not recommended Not Recommened

    Hydraulics

    JCB 4DX CASE 851 NX
    Type
    Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. Open Center Load Sensing , Variable Displacement Pump
    Maximum Pump Flow
    148 L/min @ 2200 RPM 143 L/min
    System Pressure
    250 bar 240 bar

    Axles

    JCB 4DX CASE 851 NX
    Rear Axle
    Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. CARRARO 28.32M
    Front Axle
    Steer axle; centrally pivoted; with oscillation angle of 16º CNH PS1300 (2WD) / NH 26.17M (4WD)

    Service Capacities

    JCB 4DX CASE 851 NX
    Fuel Tank
    128 L 129 L
    Engine Coolant
    20.5 L 10 L
    Engine Oil
    15 L 8.5 L
    Hydraulic Tank
    NA NA
    Hydraulic System
    115 L 96 L
    Transmission
    17.5 L 18 L (2WD) / 20 L (4WD)
    Rear Axle
    20 L 17.1 L

    Excavator Performance

    JCB 4DX CASE 851 NX
    Maximum Digging Depth
    5360 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre
    7570 mm 5900 mm
    Reach-Ground Level to Slew Centre
    6380 mm 7220 mm
    Reach at Full Height to Slew Centre
    2180 mm 2400 mm
    Side Reach to Centre Line of Machine
    NA NA
    Maximum Working Height
    6250 mm 5700 mm
    Maximum Load Over Height
    3960 mm 3800 mm
    Bucket Rotation Angle
    185° 204° & 160°
    Bucket Digging force
    6716 kgf 5000 kgf (204°) / 6550 kgf (160°)
    Arm Digging force
    4551 kgf 3900 kgf
    Maximum Lift Capacity
    2547 kg 1477 kg
    Standard Bucket Capacity
    0.40 m³ 0.36 / 0.40 m³
    Standard Bucket Width
    940 mm NA

    Loader Performance

    JCB 4DX CASE 851 NX
    Dump Height
    2930 mm 2720 mm
    Load Over Height
    3370 mm 3300 mm
    Pin Height
    3640 mm 3600 mm
    Pin Forward Reach
    NA 240 mm
    Reach At Ground
    1600 mm 1980 mm
    Maximum Reach at Full Height
    1240 mm 1190 mm
    Max Reach Full Height Dumped
    930 mm 760 mm
    Below Ground Level Dig Depth
    130 mm 110 mm
    Rollback at Ground
    43° 33°
    Dump Angle
    41° 45°
    Shovel Breakout Force
    6264 mm 5000 kgf
    Loader Arm Breakout Force
    5516 mm 5250 kgf
    Maximum Payload
    1800 kg 2050 kg

    Overall Dimensions And Weight

    JCB 4DX CASE 851 NX
    Machine Weight
    8450 kg 7800 kg
    Overall Length
    6350 mm 6060 mm
    Wheelbase
    2340 mm 2180 mm
    Slew Centre to Rear Axle Centre
    1190 mm NA
    Minimum Ground Clearance
    280 mm 380 mm
    Slew Ground Clearance
    330 mm NA
    Height of Cabin
    2870 mm 2830 mm
    Overall Height
    4210 mm 3850 mm
    Track Width-Rear
    1730 mm 1700 mm
    Track Width-Front
    1910 mm 1880 mm
    Width Over Bucket
    2440 mm 2280 mm

    Popular Comparisons with JCB 4DX

    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Popular Comparisons with CASE 851 NX

    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Frequently Asked Question

    Ans.

    The JCB 4DX is easier to sell in most areas. JCB is the most common backhoe brand in India, so more people want to buy or rent it. You can sell it fast and get a fair price. The Case 851 NX also sells, but fewer buyers look for it. Where a Case dealer is near, it sells well too. If you want the easiest sale later, JCB is the safer choice.

    Ans.

    The Case 851 NX usually uses less fuel. It is lighter than the JCB 4DX, so the engine works less on flat and hard ground. Less fuel means lower cost every day. Over many months this saving adds up. If most of your work is on roads, yards, or town sites, the lighter Case will cost you less to run.

    Ans.

    For JCB, yes, almost everywhere in India. JCB has the biggest service network, so parts come fast and most drivers already know the machine. For Case, parts and service are good in many places, but not in every small town. Before you buy, check which brand has a service centre near your work. The near brand will fix your machine faster and cost you less waiting time.

    Ans.

    Take 4WD if your ground is wet, soft, or sloped. It has more grip and power there. Take 2WD if you work on hard, flat ground in towns, roads, or yards. It is lighter and saves fuel. Both the Case 851 NX and the JCB 4DX come in 2WD and 4WD. Do not pay extra for 4WD if you will not use it.

    Ans.

    Yes, very easily. Banks, finance companies, and both Case and JCB dealers give loans for these machines. How much you pay each month depends on your down payment and your loan record. Ask two or three lenders first. Do not take the first EMI offer.

    Ans.

    Choose the Case 851 NX for daily loading, road work, and jobs where low fuel cost matters most. Choose the JCB 4DX for deep digging, drain work, and big sites where you need more reach and lift. Both do all backhoe jobs. The difference is which one you want to be best at your main work.

    JCB 4DX Vs CASE 851 NX - Compare Price & Availability Across 600+ Locations in India

    Compare JCB 4DX Vs CASE 851 NX price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare