Suno Sabki, Chuno Apni.
Contact Us



    Chat with us

    JCB 4DX VS Mahindra SX Smart 50 Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.

    Key Highlights JCB 4DXMahindra SX Smart 50
    JCB 4DX VS Mahindra SX Smart 50 Backhoe Loader
    JCB 4DX Price
    JCB 4DX

    ₹ 36-40 Lakhs

    Mahindra Backhoe Loader 50 HP Price
    Mahindra SX Smart 50

    ₹ 31-33 Lakhs

    Particulars JCB 4DX Mahindra SX Smart 50

    JCB 4DX vs Mahindra SX Smart 50: Which Backhoe Loader Should You Buy?

    These two machines are not close in size, so the choice comes down to how heavy your work is. The JCB 4DX has more engine power, digs deeper and lifts more, with an advanced filter system that protects the engine on dusty sites. The Mahindra SX Smart 50 is lighter, more compact, and runs a simpler engine that is easier to maintain, with an emergency steering feature that keeps you in control if power steering ever fails.

    Think about your daily job size and who will maintain the machine. A contractor doing heavy, deep digging on big sites gets more out of the 4DX's extra power and reach. A smaller contractor or first-time owner doing lighter, everyday digging gets an easier, cheaper-to-maintain machine in the SX Smart 50. See the full JCB backhoe range, the Mahindra backhoe range, or read our backhoe loader buying guide.

    JCB 4DX Backhoe Loader

    Pros:

    • More powerful engine with 74 HP
    • Increased dig depth of 5360 mm
    • Better lifting capacity with an excavator max lift capacity of 2547 kg
    • Higher loader load over height at 3370 mm
    • More efficient CRDi engine with turbocharging, EGR, and aftertreatment system DOC and DPF
    • Higher max torque at 440 Nm
    • Greater maximum speed of 40.0 km/hr
    • Larger fuel capacity at 128 L
    • Higher shovel capacity of 1.2 m³
    • Advanced filtration system with ‘JCB Filtromatic Filter’

    Cons:

    • Optional AC Cabin
    • Heavier machine weight at 8450 kg
    • Lower maximum pump flow 148 L/min compared to SX Smart 50

    Mahindra EarthMaster SX Smart 50 Backhoe Loader

    Pros:

    • Lower machine weight at 7477 kg, potentially easier to manoeuvre
    • Emergency steering in case of power failure
    • More compact design with a smaller width over bucket size (not provided but presumed due to smaller shovel capacity)
    • Less complex engine, potentially easier maintenance with the naturally aspirated NEF Engine
    • Potentially more responsive steering type being hydrostatic with priority function

    Cons:

    • Less powerful engine at 49.2 HP
    • Lower excavator max lift capacity of 1403 kg
    • Smaller digging depth of 4854 mm
    • Smaller shovel capacity at 1.1 m³
    • Lower maximum speed of 33 km/hr
    • Lower max torque at 235 Nm

    Pros:

    Cons:

    Closing Recommendation

    Choose between these two by how heavy and constant your digging work is. Pick the JCB 4DX when your jobs need more power, deeper digging and higher lifting on tougher, dustier sites. Pick the Mahindra SX Smart 50 when your work is lighter and everyday, and you want a machine that is simpler and cheaper to keep running. So match the machine to your work: JCB 4DX for heavy, deep digging jobs, Mahindra SX Smart 50 for lighter, everyday work with easier upkeep.

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Price, Technical Specifications & Features

    Brand JCB Backhoe Loader Mahindra Backhoe Loader
    Type 2WD/4WD 2WD
    Price ₹ 36-40 Lakhs ₹ 31-33 Lakhs
    Engine JCB 74 HP Mahindra 49.2 HP
    Bucket 0.32 m³ 0.27 m³
    Shovel 1.2 m³ 1.1 m³
    Max Digging Depth 5360 mm 4854 mm
    Max Dump Height 2930 mm 2708 mm
    Weight 8450 Kg 7477 Kg
    Quick Overview:

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    Mahindra’s SX Smart 50 is a 2WD backhoe loader for owners who want one machine to dig, load and travel between village jobs. A four-cylinder, naturally aspirated Mahindra engine rated 49.2 HP keeps fuel use and maintenance simple. The backhoe digs to 4854 mm with a 0.27 m³ bucket, the loader end carries a 1.1 m³ shovel, and the machine weighs 7477 kg.

    A 33 km/hr top speed makes road moves between sites practical, and GPS is standard, useful when the machine earns on hire. Mahindra’s service reach into small-town India is a real advantage for first-time buyers, and warranty cover runs 1 year.

    JCB 4DX vs Mahindra SX Smart 50: Which Backhoe Loader Should You Buy?

    These two machines are not close in size, so the choice comes down to how heavy your work is. The JCB 4DX has more engine power, digs deeper and lifts more, with an advanced filter system that protects the engine on dusty sites. The Mahindra SX Smart 50 is lighter, more compact, and runs a simpler engine that is easier to maintain, with an emergency steering feature that keeps you in control if power steering ever fails.

    Think about your daily job size and who will maintain the machine. A contractor doing heavy, deep digging on big sites gets more out of the 4DX's extra power and reach. A smaller contractor or first-time owner doing lighter, everyday digging gets an easier, cheaper-to-maintain machine in the SX Smart 50. See the full JCB backhoe range, the Mahindra backhoe range, or read our backhoe loader buying guide.

    JCB 4DX Backhoe Loader

    Pros:

    • More powerful engine with 74 HP
    • Increased dig depth of 5360 mm
    • Better lifting capacity with an excavator max lift capacity of 2547 kg
    • Higher loader load over height at 3370 mm
    • More efficient CRDi engine with turbocharging, EGR, and aftertreatment system DOC and DPF
    • Higher max torque at 440 Nm
    • Greater maximum speed of 40.0 km/hr
    • Larger fuel capacity at 128 L
    • Higher shovel capacity of 1.2 m³
    • Advanced filtration system with ‘JCB Filtromatic Filter’

    Cons:

    • Optional AC Cabin
    • Heavier machine weight at 8450 kg
    • Lower maximum pump flow 148 L/min compared to SX Smart 50

    Mahindra EarthMaster SX Smart 50 Backhoe Loader

    Pros:

    • Lower machine weight at 7477 kg, potentially easier to manoeuvre
    • Emergency steering in case of power failure
    • More compact design with a smaller width over bucket size (not provided but presumed due to smaller shovel capacity)
    • Less complex engine, potentially easier maintenance with the naturally aspirated NEF Engine
    • Potentially more responsive steering type being hydrostatic with priority function

    Cons:

    • Less powerful engine at 49.2 HP
    • Lower excavator max lift capacity of 1403 kg
    • Smaller digging depth of 4854 mm
    • Smaller shovel capacity at 1.1 m³
    • Lower maximum speed of 33 km/hr
    • Lower max torque at 235 Nm

    Pros:

    Cons:

    Closing Recommendation

    Choose between these two by how heavy and constant your digging work is. Pick the JCB 4DX when your jobs need more power, deeper digging and higher lifting on tougher, dustier sites. Pick the Mahindra SX Smart 50 when your work is lighter and everyday, and you want a machine that is simpler and cheaper to keep running. So match the machine to your work: JCB 4DX for heavy, deep digging jobs, Mahindra SX Smart 50 for lighter, everyday work with easier upkeep.

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Price, Technical Specifications & Features

    JCB 4DX Mahindra SX Smart 50
    Brand
    JCB Backhoe Loader Mahindra Backhoe Loader
    Type
    2WD/4WD 2WD
    Price
    ₹ 36-40 Lakhs ₹ 31-33 Lakhs
    Engine
    JCB 74 HP Mahindra 49.2 HP
    Bucket
    0.32 m³ 0.27 m³
    Shovel
    1.2 m³ 1.1 m³
    Max Digging Depth
    5360 mm 4854 mm
    Max Dump Height
    2930 mm 2708 mm
    Weight
    8450 Kg 7477 Kg
    Quick Overview:

    The 4DX Backhoe Loader from JCB is the top model in the series, crafted for high performance in demanding construction environments. It features standard 4WD, a powerful Stage 5-430 engine, and higher torque of 440 Nm, allowing for deeper digging of up to about 5.3 m along with superior stability. Its advanced hydraulics, smooth ride system, and strong build make it suitable for mining support, large infrastructure projects, and continuous heavy-duty work. It provides better traction, productivity, and control on rough terrain. The JCB 4DX Backhoe Loader price in India generally ranges from ₹36–40 lakh, making it an excellent choice for contractors focused on maximum output and long-term durability.

    Mahindra’s SX Smart 50 is a 2WD backhoe loader for owners who want one machine to dig, load and travel between village jobs. A four-cylinder, naturally aspirated Mahindra engine rated 49.2 HP keeps fuel use and maintenance simple. The backhoe digs to 4854 mm with a 0.27 m³ bucket, the loader end carries a 1.1 m³ shovel, and the machine weighs 7477 kg.

    A 33 km/hr top speed makes road moves between sites practical, and GPS is standard, useful when the machine earns on hire. Mahindra’s service reach into small-town India is a real advantage for first-time buyers, and warranty cover runs 1 year.

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Key Highlights

    JCB 4DX Mahindra SX Smart 50
    Engine Make JCB 430 Mahindra
    Fuel Tank 128 L 120 L
    Max Torque 440 Nm @ 1150 RPM 235 Nm@ 1000-1300 RPM
    Max Speed 40.0 km/hr 33 km/hr
    Hydraulic System 115 L 100 L
    Max Working Height 6250 mm 5793 mm
    Excavator Max Lift Capacity 2547 kg 1403 kg
    Loader Load Over Height 3960 mm 3852 mm
    Overall Length 6350 mm NA
    Wheel Base 2340 mm NA
    Bucket Digging Force 6716 kgf 5104 kgf
    Shovel Breakout Force 6264 mm 4867 kgf
    Warranty 1 Yr. / 2000 hr. 1 Year
    AC Cabin Optional Optional
    GPS Standard Standard

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Key Highlights

    JCB 4DX Mahindra SX Smart 50
    Engine Make
    JCB 430 Mahindra
    Fuel Tank
    128 L 120 L
    Max Torque
    440 Nm @ 1150 RPM 235 Nm@ 1000-1300 RPM
    Max Speed
    40.0 km/hr 33 km/hr
    Hydraulic System
    115 L 100 L
    Max Working Height
    6250 mm 5793 mm
    Excavator Max Lift Capacity
    2547 kg 1403 kg
    Loader Load Over Height
    3960 mm 3852 mm
    Overall Length
    6350 mm NA
    Wheel Base
    2340 mm NA
    Bucket Digging Force
    6716 kgf 5104 kgf
    Shovel Breakout Force
    6264 mm 4867 kgf
    Warranty
    1 Yr. / 2000 hr. 1 Year
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Specifications

    Engine

    JCB 4DX Mahindra SX Smart 50
    Model JCB 74 HP Mahindra 49.2 HP
    Type CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF. Naturally Aspirated NEF Engine; 4 Cylinders
    Gross Power 74 HP (55 kW) @ 2200 RPM 49.2 HP (36.2 kW) @ 2200 RPM
    Max Torque 440 Nm @ 1150 RPM 235 Nm@ 1000-1300 RPM
    Displacement 3.0 L 3.5 L
    Battery 12V 12V / 100 Ah
    Alternator 130A 90 A

    Transmission

    JCB 4DX Mahindra SX Smart 50
    Type Easy Shift JCB synchroshuttle transmission Four speed ( 4 forward; 4 reverse ); Low noise Two wheel Drive ( 2 WD ); synchro shuttle transmission with electrically operated reversing shuttle and torque convertor.

    Steering

    JCB 4DX Mahindra SX Smart 50
    Type Power track steering rod system provides equal turn steering & quick response with less operating force. Front wheel hydrostatic power steering; with priority function and pressure relief valve. Emergency steering in case of power failure.
    Working Pressure 160 bar 140 bar

    Steering Turning Circle

    JCB 4DX Mahindra SX Smart 50
    Inner Wheels Braked - Outside Loader Bucket 10200 mm 4494 mm
    Inner Wheels Braked - Outside Wheels 7610 mm 3091 mm
    Inner Wheels not Braked - Outside Loader Bucket 11700 mm 5697 mm
    Inner Wheels not Braked - Outside Wheels 9110 mm 4464 mm

    Brakes

    JCB 4DX Mahindra SX Smart 50
    Service JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance. Hydraulically actuated; self adjusting maintenance free; oil immersed multi-disc on the rear axle operated by independent foot pedals joined together for normal operation.
    Parking Hand operated; disc brakes on rear axle input disc. Hand operated mechanically actuated caliper type brakes .

    Tyres

    JCB 4DX Mahindra SX Smart 50
    Front 9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear 16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    JCB 4DX Mahindra SX Smart 50
    Forward- 1st gear 6.2 km/hr 4.5km/hr
    Reverse- 1st gear 6.2 km/hr 4.5km/hr
    Forward- 2nd gear 10.1 km/hr 7.3 km/hr
    Reverse- 2nd gear 10.1 km/hr 7.3 km/hr
    Forward- 3rd gear 21.9 km/hr 20.6 km/hr
    Reverse- 3rd gear Not recommended 20.6 km/hr
    Forward- 4th gear 40.0 km/hr 33 km/hr
    Reverse- 4th gear Not recommended 33 km/hr

    Hydraulics

    JCB 4DX Mahindra SX Smart 50
    Type Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. Oepn Center; Fixed displacement; Gear Pump
    Maximum Pump Flow 148 L/min @ 2200 RPM 103 L/min @ 2100 RPM
    System Pressure 250 bar 210 bar

    Axles

    JCB 4DX Mahindra SX Smart 50
    Rear Axle Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. Rigidly mounted drive axle; with outbound planetary final drives; driven by short drive shaft.
    Front Axle Steer axle; centrally pivoted; with oscillation angle of 16º Centrally pivoted; non-driven unbalanced type axle; with total oscillation of 16°C; with remote greasing facility for the main pin.

    Service Capacities

    JCB 4DX Mahindra SX Smart 50
    Fuel Tank 128 L 120 L
    Engine Coolant 20.5 L 17 L
    Engine Oil 15 L 13.7 L
    Hydraulic Tank NA 50 L
    Hydraulic System 115 L 100 L
    Transmission 17.5 L 19.20 L
    Rear Axle 20 L 17.10 L

    Excavator Performance

    JCB 4DX Mahindra SX Smart 50
    Maximum Digging Depth 5360 mm 4854 mm
    Reach-Ground Level to Rear Wheel Centre 7570 mm NA
    Reach-Ground Level to Slew Centre 6380 mm 5585 mm
    Reach at Full Height to Slew Centre 2180 mm 2774 mm
    Side Reach to Centre Line of Machine NA 6115 mm
    Maximum Working Height 6250 mm 5793 mm
    Maximum Load Over Height 3960 mm 3852 mm
    Bucket Rotation Angle 185° NA
    Bucket Digging force 6716 kgf 5104 kgf
    Arm Digging force 4551 kgf 3210 kgf
    Maximum Lift Capacity 2547 kg 1403 kg
    Standard Bucket Capacity 0.40 m³ 0.27 m³
    Standard Bucket Width 940 mm NA

    Loader Performance

    JCB 4DX Mahindra SX Smart 50
    Dump Height 2930 mm 2708 mm
    Load Over Height 3370 mm 3253 mm
    Pin Height 3640 mm NA
    Pin Forward Reach NA NA
    Reach At Ground 1600 mm 1350 mm
    Maximum Reach at Full Height 1240 mm 1115 mm
    Max Reach Full Height Dumped 930 mm NA
    Below Ground Level Dig Depth 130 mm NA
    Rollback at Ground 43° NA
    Dump Angle 41° NA
    Shovel Breakout Force 6264 mm 4867 kgf
    Loader Arm Breakout Force 5516 mm 5594 kgf
    Maximum Payload 1800 kg NA

    Overall Dimensions And Weight

    JCB 4DX Mahindra SX Smart 50
    Machine Weight 8450 kg 7477 kg
    Overall Length 6350 mm NA
    Wheelbase 2340 mm NA
    Slew Centre to Rear Axle Centre 1190 mm NA
    Minimum Ground Clearance 280 mm NA
    Slew Ground Clearance 330 mm NA
    Height of Cabin 2870 mm NA
    Overall Height 4210 mm NA
    Track Width-Rear 1730 mm NA
    Track Width-Front 1910 mm NA
    Width Over Bucket 2440 mm NA

    JCB 4DX Vs Mahindra SX Smart 50 Backhoe Loader Specifications

    Engine

    JCB 4DX Mahindra SX Smart 50
    Model
    JCB 74 HP Mahindra 49.2 HP
    Type
    CRDi 55kW Stage 5 Engine, 4 cylinder, water cooled, Turbocharged with EGR and aftertreatment system DOC and DPF. Naturally Aspirated NEF Engine; 4 Cylinders
    Gross Power
    74 HP (55 kW) @ 2200 RPM 49.2 HP (36.2 kW) @ 2200 RPM
    Max Torque
    440 Nm @ 1150 RPM 235 Nm@ 1000-1300 RPM
    Displacement
    3.0 L 3.5 L
    Battery
    12V 12V / 100 Ah
    Alternator
    130A 90 A

    Transmission

    JCB 4DX Mahindra SX Smart 50
    Type
    Easy Shift JCB synchroshuttle transmission Four speed ( 4 forward; 4 reverse ); Low noise Two wheel Drive ( 2 WD ); synchro shuttle transmission with electrically operated reversing shuttle and torque convertor.

    Steering

    JCB 4DX Mahindra SX Smart 50
    Type
    Power track steering rod system provides equal turn steering & quick response with less operating force. Front wheel hydrostatic power steering; with priority function and pressure relief valve. Emergency steering in case of power failure.
    Working Pressure
    160 bar 140 bar

    Steering Turning Circle

    JCB 4DX Mahindra SX Smart 50
    Inner Wheels Braked - Outside Loader Bucket
    10200 mm 4494 mm
    Inner Wheels Braked - Outside Wheels
    7610 mm 3091 mm
    Inner Wheels not Braked - Outside Loader Bucket
    11700 mm 5697 mm
    Inner Wheels not Braked - Outside Wheels
    9110 mm 4464 mm

    Brakes

    JCB 4DX Mahindra SX Smart 50
    Service
    JCB ‘Q’ brakes; hydraulically actuated; dual line; self adjusting (compensated); oil immersed; multi-disc type on the rear axle; well protected from dirt; water; requiring no maintenance. Hydraulically actuated; self adjusting maintenance free; oil immersed multi-disc on the rear axle operated by independent foot pedals joined together for normal operation.
    Parking
    Hand operated; disc brakes on rear axle input disc. Hand operated mechanically actuated caliper type brakes .

    Tyres

    JCB 4DX Mahindra SX Smart 50
    Front
    9 x 16 - 16 PR 9 x 16 - 16 PR
    Rear
    16.9 x 28 - 12 PR 16.9 x 28 - 12 PR

    Speed

    JCB 4DX Mahindra SX Smart 50
    Forward- 1st gear
    6.2 km/hr 4.5km/hr
    Reverse- 1st gear
    6.2 km/hr 4.5km/hr
    Forward- 2nd gear
    10.1 km/hr 7.3 km/hr
    Reverse- 2nd gear
    10.1 km/hr 7.3 km/hr
    Forward- 3rd gear
    21.9 km/hr 20.6 km/hr
    Reverse- 3rd gear
    Not recommended 20.6 km/hr
    Forward- 4th gear
    40.0 km/hr 33 km/hr
    Reverse- 4th gear
    Not recommended 33 km/hr

    Hydraulics

    JCB 4DX Mahindra SX Smart 50
    Type
    Filtration through suction strainer and return line ‘JCB Filtromatic Filter’. Oepn Center; Fixed displacement; Gear Pump
    Maximum Pump Flow
    148 L/min @ 2200 RPM 103 L/min @ 2100 RPM
    System Pressure
    250 bar 210 bar

    Axles

    JCB 4DX Mahindra SX Smart 50
    Rear Axle
    Drive axle rigidly mounted; incorporates JCB Max-Trac torque proportioning differential; driven by short propshaft from gear box. Rigidly mounted drive axle; with outbound planetary final drives; driven by short drive shaft.
    Front Axle
    Steer axle; centrally pivoted; with oscillation angle of 16º Centrally pivoted; non-driven unbalanced type axle; with total oscillation of 16°C; with remote greasing facility for the main pin.

    Service Capacities

    JCB 4DX Mahindra SX Smart 50
    Fuel Tank
    128 L 120 L
    Engine Coolant
    20.5 L 17 L
    Engine Oil
    15 L 13.7 L
    Hydraulic Tank
    NA 50 L
    Hydraulic System
    115 L 100 L
    Transmission
    17.5 L 19.20 L
    Rear Axle
    20 L 17.10 L

    Excavator Performance

    JCB 4DX Mahindra SX Smart 50
    Maximum Digging Depth
    5360 mm 4854 mm
    Reach-Ground Level to Rear Wheel Centre
    7570 mm NA
    Reach-Ground Level to Slew Centre
    6380 mm 5585 mm
    Reach at Full Height to Slew Centre
    2180 mm 2774 mm
    Side Reach to Centre Line of Machine
    NA 6115 mm
    Maximum Working Height
    6250 mm 5793 mm
    Maximum Load Over Height
    3960 mm 3852 mm
    Bucket Rotation Angle
    185° NA
    Bucket Digging force
    6716 kgf 5104 kgf
    Arm Digging force
    4551 kgf 3210 kgf
    Maximum Lift Capacity
    2547 kg 1403 kg
    Standard Bucket Capacity
    0.40 m³ 0.27 m³
    Standard Bucket Width
    940 mm NA

    Loader Performance

    JCB 4DX Mahindra SX Smart 50
    Dump Height
    2930 mm 2708 mm
    Load Over Height
    3370 mm 3253 mm
    Pin Height
    3640 mm NA
    Pin Forward Reach
    NA NA
    Reach At Ground
    1600 mm 1350 mm
    Maximum Reach at Full Height
    1240 mm 1115 mm
    Max Reach Full Height Dumped
    930 mm NA
    Below Ground Level Dig Depth
    130 mm NA
    Rollback at Ground
    43° NA
    Dump Angle
    41° NA
    Shovel Breakout Force
    6264 mm 4867 kgf
    Loader Arm Breakout Force
    5516 mm 5594 kgf
    Maximum Payload
    1800 kg NA

    Overall Dimensions And Weight

    JCB 4DX Mahindra SX Smart 50
    Machine Weight
    8450 kg 7477 kg
    Overall Length
    6350 mm NA
    Wheelbase
    2340 mm NA
    Slew Centre to Rear Axle Centre
    1190 mm NA
    Minimum Ground Clearance
    280 mm NA
    Slew Ground Clearance
    330 mm NA
    Height of Cabin
    2870 mm NA
    Overall Height
    4210 mm NA
    Track Width-Rear
    1730 mm NA
    Track Width-Front
    1910 mm NA
    Width Over Bucket
    2440 mm NA

    Popular Comparisons with JCB 4DX

    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Popular Comparisons with Mahindra SX Smart 50

    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    JCB JCB 2DX
    4.5 rating
    ₹ 27-29 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    VS
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    Frequently Asked Question

    Ans.

    The price of the Mahindra SX Smart 50 changes by state, dealer and finance terms, so there is no single fixed number. It costs less than the JCB 4DX because it is a smaller, lower-power machine. Ask your nearest Mahindra dealer for the current on-road price in your area.

    Ans.

    The JCB 4DX digs deeper. It has a greater maximum digging depth than the Mahindra SX Smart 50, so it suits jobs like deeper trenching and foundation work.

    Ans.

    The Mahindra SX Smart 50 is easier and cheaper to maintain. It runs a simpler, naturally aspirated engine without a turbocharger, so servicing is more straightforward than the JCB 4DX's more advanced CRDi engine.

    Ans.

    It lets you keep steering the machine even if the power steering fails. This is a safety feature that gives the driver more control in a breakdown, which the JCB 4DX does not highlight in the same way.

    Ans.

    An AC cabin is optional on the JCB 4DX, not standard. If cabin comfort matters to you, check with your dealer and add it when you place your order.

    Ans.

    The JCB 4DX is better for dusty sites. It uses JCB's own advanced filtration system, which protects the engine for longer when the machine works in heavy dust all day.

    JCB 4DX Vs Mahindra SX Smart 50 - Compare Price & Availability Across 600+ Locations in India

    Compare JCB 4DX Vs Mahindra SX Smart 50 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare