Komatsu D475A-5E0 vs BEML BD155: the two differ on 70 of 77 listed specs. The main differences are Engine (Komatsu 890 HP vs BEML 324 HP), Operating Weight (108,390 kg vs 38,000 kg), Weight (108390 kg vs 38000 kg), Fuel Tank (1670 L vs 590 L). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Komatsu D475A-5E0
BEML BD155
Komatsu D475A-5E0
VS
BEML BD155
Dozer
Komatsu D475A-5E0 vs BEML BD155: the two differ on 70 of 77 listed specs. The main differences are Engine (Komatsu 890 HP vs BEML 324 HP), Operating Weight (108,390 kg vs 38,000 kg), Weight (108390 kg vs 38000 kg), Fuel Tank (1670 L vs 590 L). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Komatsu D475A-5E0
Price Available Soon
BEML BD155
Price Available Soon
Particulars
Komatsu D475A-5E0
BEML BD155
BEML BD155 vs Komatsu D475A-5E0: which mining dozer fits your scale of work?
This is a question of scale, not just spec. The BEML BD155 is a familiar 324 HP mining dozer with a long-established parts and rebuild network in India's coal belt. The Komatsu D475A-5E0 is an ultra-class machine at 890 HP and over 108 tonnes, with a 27.2 m³ blade built for continuous, very large-scale opencast production. Below that scale of work, the D475A-5E0 sits idle for much of the time.
Both sit in our mining dozers range, but at very different ends of it. Pick the BEML BD155 for typical coal-belt fleet operations, overburden work and mine development with familiar local support. Pick the Komatsu D475A-5E0 only if your mine runs sustained, very high-volume production and you can support the machine through Komatsu's mining infrastructure. New to dozers? Read the bulldozer guide first.
BEML BD155
Pros:
Long-established platform in India's coal sector, with a PSU parts chain and rebuild shops
Lower ground bearing pressure at 88.9 kPa bare tractor against 128 kPa tractor-only on the D475A-5E0
Tighter min turning radius at 3,800 mm
588 kN drawbar pull, with giant and multi-shank ripper options
Much lighter and easier to move between working areas at 38,000 kg operating weight
Cons:
Far less powerful at 324 HP against the D475A-5E0's 890 HP
Much smaller blade capacity at 7.9 m³ against 27.2 m³
Mechanically governed engine trails newer machines on fuel efficiency and comfort
Smaller 590-litre fuel tank
Komatsu D475A-5E0
Pros:
Far more powerful at 890 HP, with a 27.2 m³ blade for very large material volumes
Two ripper choices: a variable giant single-shank reaching 1,744 mm or a 3-shank multi-shank ripper
Standard high-capacity AC cabin and a Vehicle Health Monitoring System
Much bigger 1,670-litre fuel tank for extended shifts
Cons:
Much heavier at 108,390 kg operating weight
Wider min turning radius at 4,600 mm
Higher ground bearing pressure, at 128 kPa tractor-only and about 166 kPa in full operating trim
Built for continuous ultra-class production; on anything less it sits idle for much of the time
Pros:
Cons:
Closing Recommendation
The BEML BD155 suits coal-belt contractors and mid-size mining fleets who want a familiar, well-supported machine for regular overburden and mine-development work. The Komatsu D475A-5E0 suits large opencast mines running continuous, very high-volume production who can support it through Komatsu's mining infrastructure. So match the machine to your work: BEML BD155 for typical coal-belt mining fleets, Komatsu D475A-5E0 for large-scale continuous opencast production needing maximum power and blade capacity.
Komatsu D475A-5E0 Vs BEML BD155 Dozer Price, Technical Specifications & Features
The Komatsu D475A-5E0 is a 108.4-tonne mining crawler dozer with an 890 HP engine. Its 27.2 m³ blade handles very large material volumes, while tractor-only ground bearing pressure is 128 kPa and reaches about 166 kPa in full operating trim. Two ripper configurations are available for different breaking requirements. The variable giant single-shank reaches 1,744 mm, while the 3-shank multi-shank setup covers wider ground. The choice therefore depends on whether the operation needs deeper breaking or broader coverage. A 1,670-litre fuel tank supports extended working shifts, and 655 mm of ground clearance suits rough mining surfaces. The machine is the largest of Komatsu's listed mining dozers. Coal and metal mining are its primary applications rather than general construction. Large mining operations can consider this dozer machine when production requirements have moved beyond the D375A-6. Its blade capacity can reduce the number of passes required across large cuts. Buyers can select the ripper arrangement according to the expected ground conditions. The operating weight and power make it suitable for very large-scale pushing and ripping work. For mining fleets requiring Komatsu's highest listed crawler dozer capacity, the D475A-5E0 provides the largest option.
The BEML BD155 is a 38-tonne mining crawler dozer with a 324 HP engine and a 7.9 m³ blade. Its 588 kN drawbar pull provides substantial force for pushing packed ground and overburden. Both giant and multi-shank ripper options are available, allowing operators to choose between deeper breaking and broader ground coverage. Ground bearing pressure of about 89 kPa makes firmer haul-road surfaces a better fit. A 590-litre fuel tank supports long working shifts, while 500 mm of ground clearance helps clear loose rock around the machine. The BD155 is the smallest mining-class model in BEML's range, sitting below the BD355 and BD475-2. Its position makes it useful for operators moving beyond construction-class crawler dozers. Blade options include straight-tilt, angle, semi-U and coal configurations. The coal blade reaches 17.4 m³ for higher-volume material handling. Mining contractors can consider this machine for overburden removal, haul-road preparation and larger material-moving work. The combination of blade capacity and ripping options gives the dozer machine wider coverage across mining applications. It provides a practical starting point for buyers entering BEML's mining crawler dozer range.
Agency review
Planning to buy the Komatsu D475A-5E0 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the BEML BD155 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
BEML BD155 vs Komatsu D475A-5E0: which mining dozer fits your scale of work?
This is a question of scale, not just spec. The BEML BD155 is a familiar 324 HP mining dozer with a long-established parts and rebuild network in India's coal belt. The Komatsu D475A-5E0 is an ultra-class machine at 890 HP and over 108 tonnes, with a 27.2 m³ blade built for continuous, very large-scale opencast production. Below that scale of work, the D475A-5E0 sits idle for much of the time.
Both sit in our mining dozers range, but at very different ends of it. Pick the BEML BD155 for typical coal-belt fleet operations, overburden work and mine development with familiar local support. Pick the Komatsu D475A-5E0 only if your mine runs sustained, very high-volume production and you can support the machine through Komatsu's mining infrastructure. New to dozers? Read the bulldozer guide first.
BEML BD155
Pros:
Long-established platform in India's coal sector, with a PSU parts chain and rebuild shops
Lower ground bearing pressure at 88.9 kPa bare tractor against 128 kPa tractor-only on the D475A-5E0
Tighter min turning radius at 3,800 mm
588 kN drawbar pull, with giant and multi-shank ripper options
Much lighter and easier to move between working areas at 38,000 kg operating weight
Cons:
Far less powerful at 324 HP against the D475A-5E0's 890 HP
Much smaller blade capacity at 7.9 m³ against 27.2 m³
Mechanically governed engine trails newer machines on fuel efficiency and comfort
Smaller 590-litre fuel tank
Komatsu D475A-5E0
Pros:
Far more powerful at 890 HP, with a 27.2 m³ blade for very large material volumes
Two ripper choices: a variable giant single-shank reaching 1,744 mm or a 3-shank multi-shank ripper
Standard high-capacity AC cabin and a Vehicle Health Monitoring System
Much bigger 1,670-litre fuel tank for extended shifts
Cons:
Much heavier at 108,390 kg operating weight
Wider min turning radius at 4,600 mm
Higher ground bearing pressure, at 128 kPa tractor-only and about 166 kPa in full operating trim
Built for continuous ultra-class production; on anything less it sits idle for much of the time
Pros:
Cons:
Closing Recommendation
The BEML BD155 suits coal-belt contractors and mid-size mining fleets who want a familiar, well-supported machine for regular overburden and mine-development work. The Komatsu D475A-5E0 suits large opencast mines running continuous, very high-volume production who can support it through Komatsu's mining infrastructure. So match the machine to your work: BEML BD155 for typical coal-belt mining fleets, Komatsu D475A-5E0 for large-scale continuous opencast production needing maximum power and blade capacity.
Komatsu D475A-5E0 Vs BEML BD155 Dozer Price, Technical Specifications & Features
The Komatsu D475A-5E0 is a 108.4-tonne mining crawler dozer with an 890 HP engine. Its 27.2 m³ blade handles very large material volumes, while tractor-only ground bearing pressure is 128 kPa and reaches about 166 kPa in full operating trim. Two ripper configurations are available for different breaking requirements. The variable giant single-shank reaches 1,744 mm, while the 3-shank multi-shank setup covers wider ground. The choice therefore depends on whether the operation needs deeper breaking or broader coverage. A 1,670-litre fuel tank supports extended working shifts, and 655 mm of ground clearance suits rough mining surfaces. The machine is the largest of Komatsu's listed mining dozers. Coal and metal mining are its primary applications rather than general construction. Large mining operations can consider this dozer machine when production requirements have moved beyond the D375A-6. Its blade capacity can reduce the number of passes required across large cuts. Buyers can select the ripper arrangement according to the expected ground conditions. The operating weight and power make it suitable for very large-scale pushing and ripping work. For mining fleets requiring Komatsu's highest listed crawler dozer capacity, the D475A-5E0 provides the largest option.
The BEML BD155 is a 38-tonne mining crawler dozer with a 324 HP engine and a 7.9 m³ blade. Its 588 kN drawbar pull provides substantial force for pushing packed ground and overburden. Both giant and multi-shank ripper options are available, allowing operators to choose between deeper breaking and broader ground coverage. Ground bearing pressure of about 89 kPa makes firmer haul-road surfaces a better fit. A 590-litre fuel tank supports long working shifts, while 500 mm of ground clearance helps clear loose rock around the machine. The BD155 is the smallest mining-class model in BEML's range, sitting below the BD355 and BD475-2. Its position makes it useful for operators moving beyond construction-class crawler dozers. Blade options include straight-tilt, angle, semi-U and coal configurations. The coal blade reaches 17.4 m³ for higher-volume material handling. Mining contractors can consider this machine for overburden removal, haul-road preparation and larger material-moving work. The combination of blade capacity and ripping options gives the dozer machine wider coverage across mining applications. It provides a practical starting point for buyers entering BEML's mining crawler dozer range.
70 differ · 7 identical
Key highlights: Komatsu D475A-5E0 vs BEML BD155 Dozer
Komatsu D475A-5E0
BEML BD155
Engine Make
Komatsu SAA12V140E-3
BEML BS6D170-1
Rated Engine Power
664 kW (890 HP) @ 2000 rpm
242 kW (324 HP) @ 2000 rpm
Maximum Torque
NA
1456 Nm @ 1400 rpm
Max Forward Speed
11.2 km/h
11.8 km/h
Max Drawbar Pull
NA
588 kN
Fuel Tank
1670 L
590 L
Overall Width
5265 mm
4130 mm
Track Shoe Width
710 mm (extreme service; 810 mm / 910 mm optional)
Questions buyers ask about the Komatsu D475A-5E0 vs BEML BD155
Ans.
The Komatsu D475A-5E0 is far more powerful. It has an 890 HP engine against 324 HP on the BD155, and its blade holds 27.2 m³ against 7.9 m³. It is built to move very large material volumes per pass.
Ans.
The Komatsu D475A-5E0 has the much bigger blade, at 27.2 m³ against 7.9 m³ on the BD155. That size difference reflects the two machines' very different scale of work.
Ans.
The BEML BD155 turns in a tighter radius, at 3,800 mm against 4,600 mm for the D475A-5E0. Its smaller size also makes it easier to move between working areas.
Ans.
The BEML BD155 has the lower ground bearing pressure, at 88.9 kPa bare tractor against 128 kPa tractor-only on the D475A-5E0, which rises further to about 166 kPa in full operating trim with a ripper fitted.
Ans.
The BEML BD155 makes more sense for a smaller or mid-size mining fleet. The D475A-5E0 is an ultra-class machine built for large opencast mines running continuous, very high-volume production, and it needs that scale of work to earn its keep. On anything less, it sits idle for much of the time.
Komatsu D475A-5E0 Vs BEML BD155 - Compare Price & Availability Across 600+ Locations in India
Compare Komatsu D475A-5E0 Vs BEML BD155 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
