NHAI keeps no contractor class list or enlistment, so nhai contractor registration means two free accounts and a digital signature: a bidder ID on the government e-procurement portal etenders.gov.in and, on newer notices, a verified company profile on MoRTH’s BIMS portal (bims.gov.in), signed with a Class 3 DSC. After that every tender qualifies you afresh. An October 2026 NHAI EPC job in Haryana, estimated at Rs 12.15 crore, wanted average turnover of Rs 2.43 crore, a net worth of Rs 0.61 crore, completed highway work of Rs 3.04 crore twice or Rs 4.25 crore once, and a bid security of Rs 12.15 lakh.
On 14 November 2026, NHAI’s current-tenders page carried 256 notices, among them a Rs 43 lakh bridge repair in Tamil Nadu and a 5.2 km maintenance contract in Madhya Pradesh worth Rs 14.16 crore. Yet NHAI issues no contractor registration number for any of them to ask for. What each notice tests instead is turnover, finished highway work and spare bid capacity, measured fresh every time.
Does NHAI have a contractor registration?
No. The National Highways Authority of India, which builds and maintains national highways for the Ministry of Road Transport and Highways (MoRTH), runs no scheme that enrols road contractors into classes with monetary limits. That sets it apart from a state department; compare the class system explained in the PWD contractor registration guide, or the PMGSY contractor registration rules for rural roads.
NHAI does empanel some firms, and those notices are easy to mistake for a contractor list. In 2026 its tender page carried requests for empanelment of expansion joint manufacturers and bridge bearing manufacturers, a panel of road safety auditors, advocates for land acquisition cases, advertising agencies, and, from the Bhopal regional office among others, plantation agencies for avenue and median planting. Engineers who supervise highway projects (Independent Engineers and Authority’s Engineers) are hired through consultancy tenders. None of these gives a road contractor the right to bid.
NHAI contractor registration: etenders.gov.in and BIMS
The e-tendering instructions attached to an NHAI EPC tender issued by the Chandigarh regional office on 7 October 2026 set out what “registration” means in practice:
- Get a Class 3 digital signature certificate (DSC) from a licensed certifying agency, in the name of the authorised signatory. The person holding the power of attorney must be the one who signs digitally, or the bid is non-responsive.
- Register the firm on etenders.gov.in, the Central Public Procurement Portal, and on the BIMS portal. User IDs and passwords are free, and the registration must stay valid up to the bid date. A firm already registered on the portal does not need to register again.
- Pay the cost of the bid document online to NHAI. It was Rs 10,000 on this EPC job and Rs 50,000, by RTGS to the Bhopal regional office, on the Madhya Pradesh maintenance job.
- Upload the technical bid and the price bid online. The lowest bidder then hands in the originals, such as the bid security, power of attorney and integrity pact, before the letter of acceptance; a demand draft, FDR or banker’s cheque must reach NHAI within 5 working days of the bid date.
BIMS is the newer piece. MoRTH’s BIMS bidder registration guide (version 1.3, dated 3 November 2026) describes a three-step form: identity, contact details, then uploads of the PAN card, GSTIN certificate and certificate of incorporation as PDFs. PAN is checked live against the income tax records, GSTIN against your legal name, and a company’s CIN through a code sent to the e-mail filed with MCA. You get a Bidder ID, and the same profile serves MoRTH, NHAI and NHIDCL. There is a field for an Udyam number, but the guide asks for no class, turnover band or fee.
Two cautions. The Madhya Pradesh item-rate notice and a September 2026 Haryana service road tender mentioned only etenders.gov.in, so the portal list changes from notice to notice. And the BIMS home page, read on 14 November 2026, still listed tender browsing and online bid submission as coming in a later phase. Register on both and follow the tender in hand. NHIDCL runs on the same model; see NHIDCL vendor registration.
What three 2026 NHAI tenders asked for
NHAI lets most of its smaller work in two forms. An EPC (engineering, procurement and construction) contract pays a lump sum for a defined job. An item-rate contract pays for measured quantities against a bill of quantities. Below them sit short quotation notices issued by a project implementation unit (PIU) for urgent repairs.
| Test | EPC: VUP and service road, NH-152, Haryana (Oct 2026) | Item rate: maintenance, NH-934, Madhya Pradesh (Oct 2026) | Quotation: two ROB repairs, NH-32, Tamil Nadu (Oct 2026) |
|---|---|---|---|
| Estimate (without GST) | Rs 12,15,44,530; 1 year to build, 10 years maintenance | Rs 14,16,43,105; 12 months | Rs 43,42,666; 30 days |
| How you bid | Online, etenders.gov.in and BIMS | Online, etenders.gov.in | Sealed hard copy at PIU Chengalpattu |
| Bid document cost | Rs 10,000 | Rs 50,000 | Rs 500 |
| Bid security | Rs 12.15 lakh (about 1%) | Rs 28,32,862 (about 2%) | None stated |
| Average turnover | Rs 2.43 crore over 5 years | Rs 4,24,92,932 over 3 years (30%) | None stated |
| Similar work | Two of Rs 3.04 crore or one of Rs 4.25 crore, last 5 years | One of Rs 11.33 crore, two of Rs 7.08 crore or three of Rs 5.67 crore, last 7 years | “Experienced agency”, preferably local |
| Other tests | Net worth Rs 0.61 crore; payments of Rs 9.12 crore on eligible projects in 5 years | 13 items of key equipment, none older than 5 years | Undertakings on Rs 100 stamp paper |
| Joint venture | Not allowed (up to Rs 100 crore) | Not allowed | Not addressed |
Neither the EPC nor the item-rate document mentions an exemption for micro and small enterprises. The EPC request for proposal also narrows what counts. Similar work must come from highway-sector projects, which include bridges, tunnels and bypasses. PMGSY, rural and city roads count toward the Rs 9.12 crore payment test only at a 0.75 weight. Periodic maintenance, resurfacing, earthwork alone and NHAI’s short-term OMT contracts are excluded as eligible projects, unless the new tender is itself maintenance on EPC mode. The same RFP lists O&M and short-term maintenance contracts in its 0.75-weighted core sector, so ask the regional office in writing which clause governs before you count them. For work done for NHAI, the experience certificate comes from the General Manager (Technical) at headquarters on the Project Director’s recommendation.
The item-rate job is stricter on paper: its similar-work bar runs to 80% of the estimate for a single job. It is also unforgiving on paperwork. A bidder who fails to hand in the listed originals is debarred from NHAI bidding for 5 years. Size the bid security against your bank limits with the EMD in tender guide, and track live national highway tenders with their estimates on the government tender opportunities board.
How bid capacity decides who qualifies
Passing turnover and experience is only half the test. Your available bid capacity must exceed the value put to tender. On the Haryana EPC job it is A x N x 2.5 minus B plus C. A is your best year of civil work in the last five years, updated by factors of up to 1.20. N is the completion period in years. B is the value of work in hand, including bids you have won before the letter of award. C is any bonus earned on EPC projects.
Take a firm whose best year was Rs 6 crore, with Rs 3.5 crore of ongoing work due in the next 12 months and no bonus. Its capacity is 6 x 1 x 2.5 minus 3.5, or Rs 11.5 crore, short of the Rs 12.15 crore estimate. The same firm clears the turnover, net worth and experience tests and still cannot bid. The Madhya Pradesh job uses the older form, A x N x 2.5 minus B, with A taken from the last three years. More cases are worked in the bid capacity formula guide.
Sub-contracts and machine hire on NHAI work
Most small owners earn from NHAI work through the firm that won it. The EPC agreement attached to the Haryana tender (Clause 4.2) caps sub-contracting at 49% of the contract price; the contractor must execute at least 51% itself with its own people and equipment. For that 51% it may still sign contracts for the supply of materials, plant, equipment and labour, which is where hired machines sit. Any sub-contract above 5% of the contract price has to be reported to NHAI with the sub-contractor’s experience, and NHAI can stop it within 15 business days. It can also stop a sub-contractor who has not done one similar job worth 40% of the sub-contract value in the past three years.
Approved sub-contracts build a record that counts later. The EPC RFP accepts sub-contract experience with the client’s approval, up to the permitted share, and the item-rate document accepts work done as a nominated sub-contractor if an Executive Engineer of the main employer certifies it. If the main contractor stops paying an approved sub-contractor and progress suffers, the EPC agreement lets NHAI direct the payment out of the contractor’s bills.
Machines are the other entry. The Madhya Pradesh maintenance job lists a sensor paver, an 8-tonne vibratory roller, an 8 to 10-tonne static roller, a pneumatic tyred roller, a grader or backhoe loader and ten 10-tonne tippers, among 13 items. Owned, leased or rented machines all count, but each must be under 5 years old, and a hired machine needs the rent agreement plus the owner’s proof of ownership. A grader such as the Mahindra Roadmaster G90, with a 3,000 mm blade (about Rs 41.8 to 46.2 lakh, indicative, as of Nov 2026), a 9.1-tonne tandem roller such as the Escorts HD 85 PLUS (about Rs 32.3 to 35.7 lakh, indicative, as of Nov 2026) or a JCB 3DX backhoe fits that list. Keep invoices, RC and insurance ready, because the bidder must upload them.
When to bid for NHAI work yourself, and when to work under a winning contractor
Bid in your own name when your average turnover, completed highway work and bid capacity all clear the figures in the notice after your current work is subtracted. A DSC and two portal accounts let you bid, but none of them improves a turnover or experience figure. If any test fails, take an approved sub-contract from an EPC contractor or rent your rollers and graders, under 5 years old, to a bidder under a written agreement that names the tender, and build NH completions that count next time. If that means adding a machine before the bid date, compare construction equipment finance early.
Figures come from NHAI’s current-tenders listing and the notices, RFPs and EPC agreement for the NH-152 VUP job (Chandigarh), the NH-934 maintenance job (Bhopal) and the NH-32 ROB repair (PIU Chengalpattu), and from MoRTH’s BIMS bidder guide, as read on 14 November 2026. Portals, tender terms and machine prices change. Confirm the current position with NHAI’s regional office and the tender document itself before you bid, and confirm machine prices with the official dealer. DesiMachines is not liable for decisions a contractor takes on information that may have changed after publication.

