ACE NXP 150 vs Escorts HYDRA 15 Top-Jack: the two differ on 46 of 53 listed specs. The main differences are Engine (Tata 49 HP vs Escorts Kubota 50 HP), Operating Weight (15310 kg vs 12050 kg), Fuel Tank (NA vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
* Ex-factory price ranges are indicative for Sep 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
ACE NXP 150
Escorts HYDRA 15 Top-Jack
ACE NXP 150
VS
Escorts HYDRA 15 Top-Jack
Crane
ACE NXP 150 vs Escorts HYDRA 15 Top-Jack: the two differ on 46 of 53 listed specs. The main differences are Engine (Tata 49 HP vs Escorts Kubota 50 HP), Operating Weight (15310 kg vs 12050 kg), Fuel Tank (NA vs 38 L), Brand (ACE Crane vs Escorts Kubota Crane). The other 7 specs are the same.
Specs from OEM brochures · comparison updated Aug 2026
ACE NXP 150
₹ 41 - 43 Lakh
Escorts HYDRA 15 Top-Jack
₹21.4 Lakh Onwards*
Particulars
ACE NXP 150
Escorts HYDRA 15 Top-Jack
ACE NXP 150 vs Escorts HYDRA 15 Top-Jack: which crane speeds up your job?
The ACE NXP 150 hoists loads faster per cycle and doubles as an aerial platform, so it suits jobs where turnaround speed and working at height both matter. The Escorts HYDRA 15 Top-Jack has a wide luffing range that helps place loads accurately in congested spots, which matters more than raw speed on cramped or busy sites.
A contractor running busy, high-repetition lifting schedules, such as precast or structural steel work, gets more throughput from the NXP 150, while a crew working in tight yards with obstacles nearby benefits from the HYDRA 15 Top-Jack's precise load control. Browse the full crane range or check the crane buying guide for other options.
ACE NXP 150
Pros:
Combines 15-ton lifting capacity with aerial access, offering high-reach capabilities
Equipped with a powerful Tata 49 HP 4-cylinder water-cooled diesel engine
Features a heavy-duty synchromesh transmission with 8 forward and 2 reverse speeds
4 Wheel Drive provides better maneuverability and traction
40° articulation and a minimum turning radius of 6500 mm for easier positioning
High hoist speed of 50 Mtrs./Min improves operational efficiency
Has a maximum boom height of 21.0 m
Cons:
Lower engine power compared to the Escorts HYDRA 15 Top-Jack
Missing information on fuel and hydraulic tank capacities
Escorts HYDRA 15 Top-Jack
Pros:
Powered by a 50 hp Escorts Kubota CEV Stage V diesel engine for robust performance
Features a slotted boom reaching up to a maximum height of 17.2 m
Wide luffing range provides accurate load positioning
High operating weight and stable articulation ensure reliable performance
2 Wheel drive with creep speed of 1.7 km/h for precision
Equipped with a hand control valve-operated air-assisted parking brake
Has a larger engine than the ACE NXP 150
Cons:
Slightly lower max boom height compared to the ACE NXP 150
2 Wheel drive may limit maneuverability on rough or uneven surfaces
Pros:
Cons:
Closing Recommendation
Both cranes lift 15 tonnes, but they help with different parts of the job. Choose the ACE NXP 150 when your work needs fast repeated lifts and the option to switch to aerial access. Choose the Escorts HYDRA 15 Top-Jack when accurate load placement around obstacles matters more than raw lifting speed. So match the machine to your work: ACE NXP 150 for quick, high-repetition lifting and aerial access, Escorts HYDRA 15 Top-Jack for precise placement in congested sites.
ACE NXP 150 Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
Pick and carry cranes do most of the everyday lifting on Indian sites, and the ACE NXP 150 covers that duty with a 15 Tonnes maximum lifting capacity and a four-section boom reaching 21.0 m of boom height. A Tata engine rated 49 HP drives it, with 4 Wheel Drive underneath and a 32 km/h travel speed without load for quick shifts between bays.
Erection jobs, plant maintenance, godown and yard loading all fall within its range. ACE builds these cranes in India, so parts and service stay close at hand, and the Tata engine can be attended by practically any truck mechanic.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
ACE NXP 150 vs Escorts HYDRA 15 Top-Jack: which crane speeds up your job?
The ACE NXP 150 hoists loads faster per cycle and doubles as an aerial platform, so it suits jobs where turnaround speed and working at height both matter. The Escorts HYDRA 15 Top-Jack has a wide luffing range that helps place loads accurately in congested spots, which matters more than raw speed on cramped or busy sites.
A contractor running busy, high-repetition lifting schedules, such as precast or structural steel work, gets more throughput from the NXP 150, while a crew working in tight yards with obstacles nearby benefits from the HYDRA 15 Top-Jack's precise load control. Browse the full crane range or check the crane buying guide for other options.
ACE NXP 150
Pros:
Combines 15-ton lifting capacity with aerial access, offering high-reach capabilities
Equipped with a powerful Tata 49 HP 4-cylinder water-cooled diesel engine
Features a heavy-duty synchromesh transmission with 8 forward and 2 reverse speeds
4 Wheel Drive provides better maneuverability and traction
40° articulation and a minimum turning radius of 6500 mm for easier positioning
High hoist speed of 50 Mtrs./Min improves operational efficiency
Has a maximum boom height of 21.0 m
Cons:
Lower engine power compared to the Escorts HYDRA 15 Top-Jack
Missing information on fuel and hydraulic tank capacities
Escorts HYDRA 15 Top-Jack
Pros:
Powered by a 50 hp Escorts Kubota CEV Stage V diesel engine for robust performance
Features a slotted boom reaching up to a maximum height of 17.2 m
Wide luffing range provides accurate load positioning
High operating weight and stable articulation ensure reliable performance
2 Wheel drive with creep speed of 1.7 km/h for precision
Equipped with a hand control valve-operated air-assisted parking brake
Has a larger engine than the ACE NXP 150
Cons:
Slightly lower max boom height compared to the ACE NXP 150
2 Wheel drive may limit maneuverability on rough or uneven surfaces
Pros:
Cons:
Closing Recommendation
Both cranes lift 15 tonnes, but they help with different parts of the job. Choose the ACE NXP 150 when your work needs fast repeated lifts and the option to switch to aerial access. Choose the Escorts HYDRA 15 Top-Jack when accurate load placement around obstacles matters more than raw lifting speed. So match the machine to your work: ACE NXP 150 for quick, high-repetition lifting and aerial access, Escorts HYDRA 15 Top-Jack for precise placement in congested sites.
ACE NXP 150 Vs Escorts HYDRA 15 Top-Jack Crane Price, Technical Specifications & Features
Pick and carry cranes do most of the everyday lifting on Indian sites, and the ACE NXP 150 covers that duty with a 15 Tonnes maximum lifting capacity and a four-section boom reaching 21.0 m of boom height. A Tata engine rated 49 HP drives it, with 4 Wheel Drive underneath and a 32 km/h travel speed without load for quick shifts between bays.
Erection jobs, plant maintenance, godown and yard loading all fall within its range. ACE builds these cranes in India, so parts and service stay close at hand, and the Tata engine can be attended by practically any truck mechanic.
Escorts Hydra 15 Top Jack is a 15-ton hydra crane fitted with a roof-mounted top jack system for specialized lifting in construction, maintenance, and low-headroom situations across India. Powered by an Escorts Kubota diesel engine producing 50 HP, it provides dependable hydraulic performance in both standard and top jack modes. The crane has a 15-ton rated lifting capacity and a boom reaching 17.2 meters for various lifting needs. The top jack setup allows vertical lift operations in tunnels, underpasses, and low-headroom industrial facilities. Hydraulic load lock valves ensure load safety during both standard and inverted lift operations. The price for the Escorts Hydra 15 Top Jack crane in India starts at ₹21.4 lakh onward*, depending on configuration and locations. This Escorts crane is ideal for specialized contractors, tunnel work, and crane rental businesses managing restricted-access sites.
Full specifications: ACE NXP 150 vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Engine Make
Tata
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
49 HP (36 kW) @ 2000 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V; Negative earth; 88Ah
Alternator
35A
NA
Lifting Capacity
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
15 Tonnes
15 Tonnes
Transmission & Clutch
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering System
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Hoist
4 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Front Wheels
Pneumatically assisted hydraulic brakes are provided on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully air actuated brakes on rear wheels.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimensions & Weight
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
2950 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4150 mm
4880 mm
Operating Weight
15310 kg
12050 kg
Front Track
1900 mm
1980 mm
Rear Track
1800 mm
1680 mm
Front Tyres
11 x 20 (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
14.00 x 25 (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Double acting hydraulic cylinder with counter balance safety valve is provided for boom telescoping
Through double acting jacks
Boom Luffing Time
NA
NA
Boom Luffing Range
-3° to +75°
-5° to + 55°
Boom Height
21.0 m
17.2 m
Full specifications: ACE NXP 150 vs Escorts HYDRA 15 Top-Jack Crane
Engine
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Engine Make
Tata
Escorts Kubota E4.391NA
Engine Type
4 cylinder water cooled diesel engine
4 Cylinders (3.9 L); Naturally Aspirated Electronic; Common Rail Direct Injection; CEV-V diesel engine
Max Power
49 HP (36 kW) @ 2000 RPM
50 HP (37 kW) @ 2200 RPM
Battery
12V; Negative earth; 75Ah
12V; Negative earth; 88Ah
Alternator
35A
NA
Lifting Capacity
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Max. Lifting Capacity
15 Tonnes
15 Tonnes
Transmission Clutch
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Drive
4 Wheel Drive
2 Wheel drive
Type
Heavy-duty; synchromesh transmission with 8 forward and 2 reverse speeds and Hi-low drive selector for creep speed
Heavy duty transmission especially developed for crane application; constant mesh gearbox coupled with straight drive axle; 8F & 2R speeds with high/low selector lever
Steering
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Steering Type
Full power orbitrol with twin hydraulic double acting cylinders
Articulated power steering hydraulically controlled through 2 hydraulic jacks
Articulation
40°
Up to 48°
Turning Radius
6500 mm
7000 mm
Hoist Mechanism
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Hoist
4 falls; hydraulic winch; steel core anti-twist rope dia 13 mm; fitted with self-adjusting hook block and rope tensioner.
6 falls; Hydraulic winch (Winch Capacity 12T); Rope dia 13 mm
Hoist Speed
50 Mtrs./Min (Line Speed)
NA
Brakes
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Front Wheels
Pneumatically assisted hydraulic brakes are provided on front wheels
‘S’ cam pneumatically actuated drum brakes
Rear Wheels
Fully air actuated brakes on rear wheels.
Pneumatically actuated disc brakes
Parking Brake
Parking brake is pneumatically operated fail safe type
Hand control valve operated; Air-assisted parking brake at front wheels
Service Capacity
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Engine Oil
NA
NA
Fuel Tank
NA
38 L
Hydraulic Tank
NA
83 L
Transmission Oil
NA
NA
Overall Dimension And Weight
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Overall Length With Bucket
NA
11900 mm
Overall Width
2950 mm
2550 mm
Overall Height
NA
3100 mm
Wheel Base
4150 mm
4880 mm
Operating Weight
15310 kg
12050 kg
Front Track
1900 mm
1980 mm
Rear Track
1800 mm
1680 mm
Front Tyres
11 x 20 (4 Nos.)
11 x 20-16 PR (4 Nos.)
Rear Tyres
14.00 x 25 (2 Nos.)
13.00 x 24-12 PR (2 Nos.)
Boom
ACE NXP 150
Escorts HYDRA 15 Top-Jack
Telescoping
4 section boom with 2 sections hydraulically operated and synchronized; and 4th section power extended
4-part; 3 part hydraulically powered & fully synchronized; 4th part power extended & manually pinned
Derricking
Double acting hydraulic cylinder with counter balance safety valve is provided for boom telescoping
Questions buyers ask about the ACE NXP 150 vs Escorts HYDRA 15 Top-Jack
Ans.
The ACE NXP 150 generally completes more lifts per hour, thanks to its faster hoist speed, which shortens the time each load takes to raise and lower.
Ans.
The Escorts HYDRA 15 Top-Jack places loads more accurately in a congested site. Its wide luffing range lets the boom angle adjust for precise positioning around obstacles.
Ans.
No, switching to aerial access does not reduce its lifting speed for normal crane work. The two functions work independently, so the crew can use whichever mode the task needs.
Ans.
The ACE NXP 150 suits high-repetition precast or steel erection work better, since its quicker hoist speed keeps cycle times shorter across many repeated lifts.
Ans.
The Escorts HYDRA 15 Top-Jack is easier to work with around fixed obstacles, since its luffing range gives finer control over where the load ends up.
ACE NXP 150 Vs Escorts HYDRA 15 Top-Jack - Compare Price & Availability Across 600+ Locations in India
Compare ACE NXP 150 Vs Escorts HYDRA 15 Top-Jack price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
