CASE 2050M vs Cat D6R2: the two differ on 68 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Cat 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.45 Cr), Operating Weight (20,592 kg vs 19,914 kg), Weight (20592 kg vs 19914 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 2050M
Cat D6R2
CASE 2050M
VS
Cat D6R2
Dozer
CASE 2050M vs Cat D6R2: the two differ on 68 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Cat 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.45 Cr), Operating Weight (20,592 kg vs 19,914 kg), Weight (20592 kg vs 19914 kg). The other 9 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 2050M
₹1.10 – 1.30 Cr
Cat D6R2
₹1.20 – 1.45 Cr
Particulars
CASE 2050M
Cat D6R2
CASE 2050M vs Cat D6R2: which big construction dozer suits your work?
The CASE 2050M and the Cat D6R2 sit close on power, at 218 HP and 217 HP, but the 2050M is the heavier machine at 20,592 kg against the D6R2's 19,914 kg, and it spreads its weight better too, with a ground bearing pressure of 50.0 kPa against the D6R2's 61 kPa. The D6R2 carries more fuel at 424 litres against the 2050M's 405 litres, and it runs Cat's proven C9 engine on a platform built simple on purpose for cost-conscious heavy use.
Choose by how your site is run. For tighter cuts and soft ground where full power through turns and lower ground pressure help, the CASE 2050M's hydrostatic drive is the steadier pick. For general heavy construction and quarry support where Cat's dealer coverage and a simple, proven design matter more than blade finesse, the D6R2 is built for that grind. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Slightly more powerful at 218 HP against the D6R2's 217 HP
Heavier at 20,592 kg against the D6R2's 19,914 kg, which helps it hold ground under load
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the D6R2's 61 kPa
Wider frame at 3,426 mm against the D6R2's 3,260 mm
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Smaller fuel tank at 405 L against the D6R2's 424 L
Hydrostatic drive needs disciplined servicing, while the D6R2 runs Cat's simpler, proven planetary powershift
CASE's dealer coverage for large dozers in India is less established than Cat's for this class
Cat D6R2
Pros:
Bigger fuel tank at 424 L against the CASE 2050M's 405 L
Runs the proven Cat C9 engine on a platform kept simple on purpose for cost-conscious heavy use
Genuine Cat structures and undercarriage life, backed by Cat's wide dealer network across India
Simple planetary powershift transmission that most workshops already know how to service
Cons:
Very slightly less powerful at 217 HP against the CASE 2050M's 218 HP
Lighter at 19,914 kg against the 2050M's 20,592 kg, so it holds ground a little less under heavy load
Sinks more on soft ground, with ground bearing pressure at 61 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two are closely matched on paper, so the deciding factor is the ground you work on and the support you can reach. The CASE 2050M sinks less on soft sites and holds its own in tight, precision-critical cuts thanks to its hydrostatic drive. The Cat D6R2 leans on a simple, proven design and Cat's wide dealer network for everyday heavy grinding. So match the machine to your work: CASE 2050M for soft ground and precision-critical cuts, Cat D6R2 for general heavy construction and quarry support.
CASE 2050M Vs Cat D6R2 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Cat D6R2 is a 19.9-tonne construction crawler dozer powered by a 217 HP engine. Its 5.6 m³ blade handles larger cuts than the D5R2, making it more suitable for mid-to-large site-development work. Ground bearing pressure is 61 kPa, while an optional multi-shank ripper provides additional breaking capability. The ripper uses three straight or curved shanks, allowing contractors to adjust the machine to different ground conditions. A 424-litre fuel tank supports a full working day, and ground clearance reaches 419 mm. Standard, semi-U, angle and low-ground-pressure blade configurations are available. Landfill and land-clearing blade options extend the possible applications. The Cat D6R2 bulldozer price is ₹1.20 crore to ₹1.45 crore. Factory-pad grading, road-base preparation and general earthwork are suitable uses. A contractor preparing a large industrial site can use the dozer machine for both material movement and periodic ripping. Its operating weight gives it more output than the D5R2 without moving into mining equipment. Buyers can consider the D6R2 when daily grading volume has increased beyond the smaller model. The combination of blade capacity and optional ripping makes it suitable for projects where ground conditions can change during the work.
Agency review
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Cat D6R2 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs Cat D6R2: which big construction dozer suits your work?
The CASE 2050M and the Cat D6R2 sit close on power, at 218 HP and 217 HP, but the 2050M is the heavier machine at 20,592 kg against the D6R2's 19,914 kg, and it spreads its weight better too, with a ground bearing pressure of 50.0 kPa against the D6R2's 61 kPa. The D6R2 carries more fuel at 424 litres against the 2050M's 405 litres, and it runs Cat's proven C9 engine on a platform built simple on purpose for cost-conscious heavy use.
Choose by how your site is run. For tighter cuts and soft ground where full power through turns and lower ground pressure help, the CASE 2050M's hydrostatic drive is the steadier pick. For general heavy construction and quarry support where Cat's dealer coverage and a simple, proven design matter more than blade finesse, the D6R2 is built for that grind. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Slightly more powerful at 218 HP against the D6R2's 217 HP
Heavier at 20,592 kg against the D6R2's 19,914 kg, which helps it hold ground under load
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the D6R2's 61 kPa
Wider frame at 3,426 mm against the D6R2's 3,260 mm
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Smaller fuel tank at 405 L against the D6R2's 424 L
Hydrostatic drive needs disciplined servicing, while the D6R2 runs Cat's simpler, proven planetary powershift
CASE's dealer coverage for large dozers in India is less established than Cat's for this class
Cat D6R2
Pros:
Bigger fuel tank at 424 L against the CASE 2050M's 405 L
Runs the proven Cat C9 engine on a platform kept simple on purpose for cost-conscious heavy use
Genuine Cat structures and undercarriage life, backed by Cat's wide dealer network across India
Simple planetary powershift transmission that most workshops already know how to service
Cons:
Very slightly less powerful at 217 HP against the CASE 2050M's 218 HP
Lighter at 19,914 kg against the 2050M's 20,592 kg, so it holds ground a little less under heavy load
Sinks more on soft ground, with ground bearing pressure at 61 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two are closely matched on paper, so the deciding factor is the ground you work on and the support you can reach. The CASE 2050M sinks less on soft sites and holds its own in tight, precision-critical cuts thanks to its hydrostatic drive. The Cat D6R2 leans on a simple, proven design and Cat's wide dealer network for everyday heavy grinding. So match the machine to your work: CASE 2050M for soft ground and precision-critical cuts, Cat D6R2 for general heavy construction and quarry support.
CASE 2050M Vs Cat D6R2 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Cat D6R2 is a 19.9-tonne construction crawler dozer powered by a 217 HP engine. Its 5.6 m³ blade handles larger cuts than the D5R2, making it more suitable for mid-to-large site-development work. Ground bearing pressure is 61 kPa, while an optional multi-shank ripper provides additional breaking capability. The ripper uses three straight or curved shanks, allowing contractors to adjust the machine to different ground conditions. A 424-litre fuel tank supports a full working day, and ground clearance reaches 419 mm. Standard, semi-U, angle and low-ground-pressure blade configurations are available. Landfill and land-clearing blade options extend the possible applications. The Cat D6R2 bulldozer price is ₹1.20 crore to ₹1.45 crore. Factory-pad grading, road-base preparation and general earthwork are suitable uses. A contractor preparing a large industrial site can use the dozer machine for both material movement and periodic ripping. Its operating weight gives it more output than the D5R2 without moving into mining equipment. Buyers can consider the D6R2 when daily grading volume has increased beyond the smaller model. The combination of blade capacity and optional ripping makes it suitable for projects where ground conditions can change during the work.
68 differ · 9 identical
Key highlights: CASE 2050M vs Cat D6R2 Dozer
CASE 2050M
Cat D6R2
Engine Make
FPT Industria F4HE96848
Cat C9
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
162 kW (217 HP)
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
NA
Max Drawbar Pull
360 kN
NA
Fuel Tank
405 L
424 L
Overall Width
3426 mm
3260 mm
Track Shoe Width
610 mm
NA
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
61 kPa (XL, ISO 16754), SU blade
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
063 (m3/mm); landfill & land-clearing variants, 166; S-LGP 3.8/4, 260; A 4.0/4, 360; SU 5.6/3, S 4.0/3
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
Multi-shank; 3 straight or curved shanks (optional)
AC Cabin
Standard
NA
Warranty
12 Months
12 Months
Key highlights: CASE 2050M vs Cat D6R2 Dozer
CASE 2050M
Cat D6R2
Engine Make
FPT Industria F4HE96848
Cat C9
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
162 kW (217 HP)
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
NA
Max Drawbar Pull
360 kN
NA
Fuel Tank
405 L
424 L
Overall Width
3426 mm
3260 mm
Track Shoe Width
610 mm
NA
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
61 kPa (XL, ISO 16754), SU blade
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
063 (m3/mm); landfill & land-clearing variants, 166; S-LGP 3.8/4, 260; A 4.0/4, 360; SU 5.6/3, S 4.0/3
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
Multi-shank; 3 straight or curved shanks (optional)
AC Cabin
Standard
NA
Warranty
12 Months
12 Months
Full specifications: CASE 2050M vs Cat D6R2 Dozer
Engine
26827
26820
Model
FPT Industria F4HE96848 (NEF family)l
Cat C9
Fuel
Diesel
Diesel
Type
Direct common rail; turbocharged, air-to-air intercooled
Questions buyers ask about the CASE 2050M vs Cat D6R2
Ans.
The CASE 2050M is very slightly more powerful, at 218 HP against the Cat D6R2's 217 HP. The two engines are close enough that power alone should not decide this purchase.
Ans.
The CASE 2050M weighs more, at 20,592 kg against the Cat D6R2's 19,914 kg. That extra weight helps the 2050M hold its ground when pushing heavy loads.
Ans.
The CASE 2050M is easier on soft ground. Its ground bearing pressure is 50.0 kPa against the Cat D6R2's 61 kPa, so the 2050M spreads its weight over more track area and sinks less.
Ans.
The Cat D6R2 carries more fuel, at 424 litres against the CASE 2050M's 405 litres. That gives the D6R2 a little more room between fill-ups on a long shift.
Ans.
The CASE 2050M is wider overall, at 3,426 mm against the Cat D6R2's 3,260 mm. The extra width comes with the 2050M's bigger frame and blade.
CASE 2050M Vs Cat D6R2 - Compare Price & Availability Across 600+ Locations in India
Compare CASE 2050M Vs Cat D6R2 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
