CASE 2050M vs SEM 822D: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Weichai 235 HP), Price (₹1.10 – 1.30 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (20,592 kg vs 24,000 kg), Weight (20592 kg vs 24000 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 2050M
SEM 822D
CASE 2050M
VS
SEM 822D
Dozer
CASE 2050M vs SEM 822D: the two differ on 69 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Weichai 235 HP), Price (₹1.10 – 1.30 Cr vs ₹90 Lakh – 1.10 Cr), Operating Weight (20,592 kg vs 24,000 kg), Weight (20592 kg vs 24000 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 2050M
₹1.10 – 1.30 Cr
SEM 822D
₹90 Lakh – 1.10 Cr
Particulars
CASE 2050M
SEM 822D
CASE 2050M vs SEM 822D: which construction dozer moves more material?
The SEM 822D is the bigger machine on paper, at 235 HP against the CASE 2050M's 218 HP, 24,000 kg against 20,592 kg, and a 6.4 m³ blade against 5.6 m³. It also carries more fuel, at 460 litres against 405 litres. The 2050M answers back with a higher drawbar pull, at 360 kN against 350 kN, wider 610 mm track shoes against the 822D's 560 mm, and a lower ground bearing pressure, so it sinks less on soft or wet ground.
Pick by the ground and the cut size. For the largest cuts and highest blade volume in one pass, the SEM 822D's size and fuel capacity carry it through long shifts. For sites with softer ground or where steady pulling power matters more than raw blade size, the CASE 2050M's drawbar pull and lower ground pressure make it the steadier machine. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Higher drawbar pull at 360 kN against the 822D's 350 kN
Wider track shoes at 610 mm against the 822D's 560 mm
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the 822D's 71.2 kPa
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Less powerful at 218 HP against the SEM 822D's 235 HP
Smaller blade at 5.6 m³ against the 822D's 6.4 m³, so it moves less material per pass
Lighter at 20,592 kg against the 822D's 24,000 kg
Smaller fuel tank at 405 L against the 822D's 460 L
SEM 822D
Pros:
More powerful at 235 HP against the CASE 2050M's 218 HP
Bigger blade at 6.4 m³ against the 2050M's 5.6 m³, so it moves more material per pass
Heavier at 24,000 kg, which adds pushing stability against the 2050M's 20,592 kg
Bigger fuel tank at 460 L against the 2050M's 405 L
Cons:
Lower drawbar pull at 350 kN against the CASE 2050M's 360 kN
Narrower track shoes at 560 mm against the 2050M's 610 mm
Sinks more on soft ground, with ground bearing pressure at 71.2 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both machines are built for heavy work, but they lean different ways. The SEM 822D is the bigger, more powerful machine with a bigger blade and more fuel for long shifts, so it suits the largest cuts. The CASE 2050M pulls harder and sinks less on soft ground, so it holds up better where the site is wet or loose. So match the machine to your work: SEM 822D for the biggest cuts and long shifts, CASE 2050M for soft or wet ground and steady pulling power.
CASE 2050M Vs SEM 822D Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The SEM 822D is a 24-tonne construction crawler dozer powered by a 235 HP engine. Its 6.4 m³ blade provides substantial material-moving capacity for large-plot grading and highway earthwork. A 350 kN drawbar pull gives strong pushing capability through compacted subgrade. Ripper choices include a multi-shank configuration reaching 860 mm and a single-shank option for different ground requirements. The machine is also winch-ready for towing and recovery applications. Ground bearing pressure is 71.2 kPa, while ground clearance reaches 400 mm. A 380-litre fuel tank supports a full working shift. The 822D sits close to the SEM 824F, so the ripper and towing requirements can help determine which machine suits the project. The SEM 822D bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors preparing large industrial plots or road packages can consider this dozer machine where stronger pushing force and blade volume affect daily output. Its operating weight places it in the larger construction class without moving fully into mining equipment. The available ripper configurations provide flexibility when soil becomes harder. Buyers can compare the 822D against the 824F based on the required attachments and ground conditions. It provides a capable construction crawler dozer for regular bulk grading, road-base preparation and larger site-development work.
Agency review
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 822D Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs SEM 822D: which construction dozer moves more material?
The SEM 822D is the bigger machine on paper, at 235 HP against the CASE 2050M's 218 HP, 24,000 kg against 20,592 kg, and a 6.4 m³ blade against 5.6 m³. It also carries more fuel, at 460 litres against 405 litres. The 2050M answers back with a higher drawbar pull, at 360 kN against 350 kN, wider 610 mm track shoes against the 822D's 560 mm, and a lower ground bearing pressure, so it sinks less on soft or wet ground.
Pick by the ground and the cut size. For the largest cuts and highest blade volume in one pass, the SEM 822D's size and fuel capacity carry it through long shifts. For sites with softer ground or where steady pulling power matters more than raw blade size, the CASE 2050M's drawbar pull and lower ground pressure make it the steadier machine. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Higher drawbar pull at 360 kN against the 822D's 350 kN
Wider track shoes at 610 mm against the 822D's 560 mm
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the 822D's 71.2 kPa
Hydrostatic drive keeps full power through tight turns without gear changes
Cons:
Less powerful at 218 HP against the SEM 822D's 235 HP
Smaller blade at 5.6 m³ against the 822D's 6.4 m³, so it moves less material per pass
Lighter at 20,592 kg against the 822D's 24,000 kg
Smaller fuel tank at 405 L against the 822D's 460 L
SEM 822D
Pros:
More powerful at 235 HP against the CASE 2050M's 218 HP
Bigger blade at 6.4 m³ against the 2050M's 5.6 m³, so it moves more material per pass
Heavier at 24,000 kg, which adds pushing stability against the 2050M's 20,592 kg
Bigger fuel tank at 460 L against the 2050M's 405 L
Cons:
Lower drawbar pull at 350 kN against the CASE 2050M's 360 kN
Narrower track shoes at 560 mm against the 2050M's 610 mm
Sinks more on soft ground, with ground bearing pressure at 71.2 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both machines are built for heavy work, but they lean different ways. The SEM 822D is the bigger, more powerful machine with a bigger blade and more fuel for long shifts, so it suits the largest cuts. The CASE 2050M pulls harder and sinks less on soft ground, so it holds up better where the site is wet or loose. So match the machine to your work: SEM 822D for the biggest cuts and long shifts, CASE 2050M for soft or wet ground and steady pulling power.
CASE 2050M Vs SEM 822D Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The SEM 822D is a 24-tonne construction crawler dozer powered by a 235 HP engine. Its 6.4 m³ blade provides substantial material-moving capacity for large-plot grading and highway earthwork. A 350 kN drawbar pull gives strong pushing capability through compacted subgrade. Ripper choices include a multi-shank configuration reaching 860 mm and a single-shank option for different ground requirements. The machine is also winch-ready for towing and recovery applications. Ground bearing pressure is 71.2 kPa, while ground clearance reaches 400 mm. A 380-litre fuel tank supports a full working shift. The 822D sits close to the SEM 824F, so the ripper and towing requirements can help determine which machine suits the project. The SEM 822D bulldozer price is ₹90 lakh to ₹1.10 crore. Contractors preparing large industrial plots or road packages can consider this dozer machine where stronger pushing force and blade volume affect daily output. Its operating weight places it in the larger construction class without moving fully into mining equipment. The available ripper configurations provide flexibility when soil becomes harder. Buyers can compare the 822D against the 824F based on the required attachments and ground conditions. It provides a capable construction crawler dozer for regular bulk grading, road-base preparation and larger site-development work.
69 differ · 8 identical
Key highlights: CASE 2050M vs SEM 822D Dozer
CASE 2050M
SEM 822D
Engine Make
FPT Industria F4HE96848
Weichai WD12G240E206
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
175 kW (235 HP)
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
10 km/h (0-10)
Max Drawbar Pull
360 kN
350 kN
Fuel Tank
405 L
460 L
Overall Width
3426 mm
3660 mm
Track Shoe Width
610 mm
560 mm
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
71.2 kPa
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
LGP S 5.5 m³; Coal 9.2 m³; U 7.5 m³; WH (waste handling) 12.7 m³; Forestry 8.7 m³
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
Optional: multi-shank (penetration 860 mm; clearance 640 mm) or single-shank (737 / 742 mm); winch-ready / INI winch (FR)
AC Cabin
Standard
Standard (HVAC)
Warranty
12 Months
12 Months
Key highlights: CASE 2050M vs SEM 822D Dozer
CASE 2050M
SEM 822D
Engine Make
FPT Industria F4HE96848
Weichai WD12G240E206
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
175 kW (235 HP)
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
10 km/h (0-10)
Max Drawbar Pull
360 kN
350 kN
Fuel Tank
405 L
460 L
Overall Width
3426 mm
3660 mm
Track Shoe Width
610 mm
560 mm
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
71.2 kPa
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
LGP S 5.5 m³; Coal 9.2 m³; U 7.5 m³; WH (waste handling) 12.7 m³; Forestry 8.7 m³
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
Optional: multi-shank (penetration 860 mm; clearance 640 mm) or single-shank (737 / 742 mm); winch-ready / INI winch (FR)
AC Cabin
Standard
Standard (HVAC)
Warranty
12 Months
12 Months
Full specifications: CASE 2050M vs SEM 822D Dozer
Engine
26827
26837
Model
FPT Industria F4HE96848 (NEF family)l
Weichai WD12G240E206
Fuel
Diesel
Diesel
Type
Direct common rail; turbocharged, air-to-air intercooled
Questions buyers ask about the CASE 2050M vs SEM 822D
Ans.
The SEM 822D is more powerful. It has 235 HP against the 2050M's 218 HP. The CASE 2050M answers back with a higher drawbar pull, at 360 kN against the 822D's 350 kN.
Ans.
The SEM 822D has the bigger blade, at 6.4 m³ against the CASE 2050M's 5.6 m³. So the 822D carries more material in each pass.
Ans.
The SEM 822D is heavier, at 24,000 kg against the CASE 2050M's 20,592 kg. Its bigger frame and blade add to that weight.
Ans.
The CASE 2050M is easier on soft ground. Its ground bearing pressure is 50.0 kPa against the SEM 822D's 71.2 kPa, so the 2050M spreads its weight over more track area and sinks less.
Ans.
The SEM 822D has the bigger fuel tank, at 460 litres against the CASE 2050M's 405 litres. That gives the 822D more room to run through a long shift without stopping to refuel.
CASE 2050M Vs SEM 822D - Compare Price & Availability Across 600+ Locations in India
Compare CASE 2050M Vs SEM 822D price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
