CASE 2050M vs Zoomlion ZD220-3: the two differ on 71 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Weichai 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.40 Cr), Operating Weight (20,592 kg vs 23,400 kg), Weight (20592 kg vs 23400 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 2050M
Zoomlion ZD220-3
CASE 2050M
VS
Zoomlion ZD220-3
Dozer
CASE 2050M vs Zoomlion ZD220-3: the two differ on 71 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Weichai 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.40 Cr), Operating Weight (20,592 kg vs 23,400 kg), Weight (20592 kg vs 23400 kg). The other 6 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 2050M
₹1.10 – 1.30 Cr
Zoomlion ZD220-3
₹1.20 – 1.40 Cr
Particulars
CASE 2050M
Zoomlion ZD220-3
CASE 2050M vs Zoomlion ZD220-3: which construction dozer fits your site?
The CASE 2050M pulls far harder than the Zoomlion ZD220-3, at 360 kN of drawbar pull against just 178 kN, even though the 2050M is the lighter machine at 20,592 kg against 23,400 kg. The 2050M also sinks less on soft ground, since its ground bearing pressure is lower, and it comes with a standard AC cabin and an optional ripper, neither of which the ZD220-3 lists. The ZD220-3 does carry the bigger blade, at 6.4 m³ against 5.6 m³, so it moves a larger scoop of material with each pass.
Choose by whether pulling force or blade volume matters more on your site. For heavier cuts and subgrade work where the dozer must keep pulling without stalling, the 2050M is the stronger choice. For bulk pushing and reclamation work on established ground where blade volume counts more than raw pulling force, the ZD220-3's bigger blade moves more material per pass. Both are construction dozers in our dozer range. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Far higher drawbar pull at 360 kN against the ZD220-3's 178 kN, so it keeps pushing through tougher ground
Lower ground bearing pressure than the ZD220-3, so it sinks less on soft ground
Wider 610 mm track shoes than the ZD220-3's 560 mm
Optional 3-shank ripper for occasional hard patches, not listed on the ZD220-3
Standard AC cabin, not listed on the ZD220-3
Cons:
Smaller 5.6 m³ blade against the ZD220-3's 6.4 m³
Lighter machine, with less mass behind the blade for sustained bulk pushing
Advanced hydrostatic drivetrain needs specialised service support, unlike the ZD220-3's simple mechanical powershift
Zoomlion ZD220-3
Pros:
Bigger 6.4 m³ blade against the 2050M's 5.6 m³, moving more material per pass in bulk work
Heavier machine, adding mass behind the blade for sustained bulk pushing
Simple planetary powershift drivetrain with a widely used Weichai engine, easy to service and find parts for
Cons:
Far lower drawbar pull at 178 kN against the 2050M's 360 kN, so it struggles more in tougher ground
Higher ground bearing pressure than the 2050M, so it sinks more on soft ground
No ripper option listed, unlike the 2050M
No standard AC cabin listed, unlike the 2050M
Pros:
Cons:
Closing Recommendation
The CASE 2050M is the stronger machine for heavier cuts and subgrade work where pulling force and soft-ground stability matter, backed by a ripper option and a cooled cabin. The Zoomlion ZD220-3 is the better fit for bulk pushing and reclamation work on established ground, where its bigger blade and extra weight move more material per pass. So match the machine to your work: CASE 2050M for tougher ground and heavier cuts, Zoomlion ZD220-3 for bulk pushing on established sites.
CASE 2050M Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
Agency review
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Zoomlion ZD220-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs Zoomlion ZD220-3: which construction dozer fits your site?
The CASE 2050M pulls far harder than the Zoomlion ZD220-3, at 360 kN of drawbar pull against just 178 kN, even though the 2050M is the lighter machine at 20,592 kg against 23,400 kg. The 2050M also sinks less on soft ground, since its ground bearing pressure is lower, and it comes with a standard AC cabin and an optional ripper, neither of which the ZD220-3 lists. The ZD220-3 does carry the bigger blade, at 6.4 m³ against 5.6 m³, so it moves a larger scoop of material with each pass.
Choose by whether pulling force or blade volume matters more on your site. For heavier cuts and subgrade work where the dozer must keep pulling without stalling, the 2050M is the stronger choice. For bulk pushing and reclamation work on established ground where blade volume counts more than raw pulling force, the ZD220-3's bigger blade moves more material per pass. Both are construction dozers in our dozer range. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Far higher drawbar pull at 360 kN against the ZD220-3's 178 kN, so it keeps pushing through tougher ground
Lower ground bearing pressure than the ZD220-3, so it sinks less on soft ground
Wider 610 mm track shoes than the ZD220-3's 560 mm
Optional 3-shank ripper for occasional hard patches, not listed on the ZD220-3
Standard AC cabin, not listed on the ZD220-3
Cons:
Smaller 5.6 m³ blade against the ZD220-3's 6.4 m³
Lighter machine, with less mass behind the blade for sustained bulk pushing
Advanced hydrostatic drivetrain needs specialised service support, unlike the ZD220-3's simple mechanical powershift
Zoomlion ZD220-3
Pros:
Bigger 6.4 m³ blade against the 2050M's 5.6 m³, moving more material per pass in bulk work
Heavier machine, adding mass behind the blade for sustained bulk pushing
Simple planetary powershift drivetrain with a widely used Weichai engine, easy to service and find parts for
Cons:
Far lower drawbar pull at 178 kN against the 2050M's 360 kN, so it struggles more in tougher ground
Higher ground bearing pressure than the 2050M, so it sinks more on soft ground
No ripper option listed, unlike the 2050M
No standard AC cabin listed, unlike the 2050M
Pros:
Cons:
Closing Recommendation
The CASE 2050M is the stronger machine for heavier cuts and subgrade work where pulling force and soft-ground stability matter, backed by a ripper option and a cooled cabin. The Zoomlion ZD220-3 is the better fit for bulk pushing and reclamation work on established ground, where its bigger blade and extra weight move more material per pass. So match the machine to your work: CASE 2050M for tougher ground and heavier cuts, Zoomlion ZD220-3 for bulk pushing on established sites.
CASE 2050M Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
71 differ · 6 identical
Key highlights: CASE 2050M vs Zoomlion ZD220-3 Dozer
CASE 2050M
Zoomlion ZD220-3
Engine Make
FPT Industria F4HE96848
Weichai WD10G220E23
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
11.2 km/h
Max Drawbar Pull
360 kN
178 kN
Fuel Tank
405 L
NA
Overall Width
3426 mm
3725 mm
Track Shoe Width
610 mm
560 mm
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
71 kPa
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Straight tilt (std)
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
NA
AC Cabin
Standard
NA
Warranty
12 Months
12 months / 2000 hrs
Key highlights: CASE 2050M vs Zoomlion ZD220-3 Dozer
CASE 2050M
Zoomlion ZD220-3
Engine Make
FPT Industria F4HE96848
Weichai WD10G220E23
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
11.2 km/h
Max Drawbar Pull
360 kN
178 kN
Fuel Tank
405 L
NA
Overall Width
3426 mm
3725 mm
Track Shoe Width
610 mm
560 mm
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
71 kPa
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Straight tilt (std)
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
NA
AC Cabin
Standard
NA
Warranty
12 Months
12 months / 2000 hrs
Full specifications: CASE 2050M vs Zoomlion ZD220-3 Dozer
Engine
26827
26817
Model
FPT Industria F4HE96848 (NEF family)l
Weichai WD10G220E23
Fuel
Diesel
Diesel
Type
Direct common rail; turbocharged, air-to-air intercooled
4-stroke, water-cooled, turbocharged, direct injection
Questions buyers ask about the CASE 2050M vs Zoomlion ZD220-3
Ans.
The CASE 2050M has far more pulling force. Its drawbar pull is 360 kN against the ZD220-3's 178 kN, even though the 2050M is the lighter of the two. That means it can keep pushing through tougher, heavier ground without stalling.
Ans.
The Zoomlion ZD220-3 has the bigger blade, at 6.4 m³ against the CASE 2050M's 5.6 m³. A bigger blade moves more material per pass, which helps on bulk pushing and reclamation work.
Ans.
The Zoomlion ZD220-3 is heavier, at 23,400 kg against the 2050M's 20,592 kg. Its extra weight adds mass behind the blade for sustained bulk pushing, even though its drawbar pull is lower than the 2050M's.
Ans.
The CASE 2050M sinks less. Its ground bearing pressure is lower than the ZD220-3's, so it holds up better on loose or filled ground. On firm, established sites, both machines work fine.
Ans.
The CASE 2050M offers both: an optional 3-shank ripper for occasional hard patches, and a standard AC cabin. The Zoomlion ZD220-3 does not list either, so drivers work without cooling and the machine stays focused on grading rather than breaking ground.
CASE 2050M Vs Zoomlion ZD220-3 - Compare Price & Availability Across 600+ Locations in India
Compare CASE 2050M Vs Zoomlion ZD220-3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
