CASE 2050M vs Cat D5R2: the two differ on 72 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Cat 174 HP), Price (₹1.10 – 1.30 Cr vs ₹95 Lakh – 1.15 Cr), Operating Weight (20,592 kg vs 16,032 kg), Weight (20592 kg vs 16032 kg). The other 5 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
CASE 2050M
Cat D5R2
CASE 2050M
VS
Cat D5R2
Dozer
CASE 2050M vs Cat D5R2: the two differ on 72 of 77 listed specs. The main differences are Engine (FPT 218 HP vs Cat 174 HP), Price (₹1.10 – 1.30 Cr vs ₹95 Lakh – 1.15 Cr), Operating Weight (20,592 kg vs 16,032 kg), Weight (20592 kg vs 16032 kg). The other 5 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
CASE 2050M
₹1.10 – 1.30 Cr
Cat D5R2
₹95 Lakh – 1.15 Cr
Particulars
CASE 2050M
Cat D5R2
CASE 2050M vs Cat D5R2: which construction dozer fits your site?
The CASE 2050M is the bigger machine here, with a 218 HP engine, a 5.6 m³ blade and 360 kN of drawbar pull, so it pushes more material in every pass. The Cat D5R2 is smaller at 174 HP with a 3.31 m³ VPAT blade, but that blade tilts, angles and pitches on its own, so one machine handles rough dozing and fine grading. The D5R2 also sinks a little more on soft ground, since its ground bearing pressure is higher than the 2050M's.
Choose by the job, not the badge. For bigger cuts and site development where raw push and blade volume matter, the CASE 2050M is the steadier buy, and its hydrostatic drive keeps full power through tight turns. For grading-led work such as roads and drains, the Cat D5R2 and its VPAT blade make fine control easier, backed by Cat's wide dealer network. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the D5R2's 174 HP, with more torque for steady pushing
Bigger blade at 5.6 m³ against the D5R2's 3.31 m³, so it moves more material per pass
Heavier at 20,592 kg, which adds stability and traction against the D5R2's 16,032 kg
Higher drawbar pull at 360 kN for pulling through tough ground
Bigger fuel tank at 405 L against the D5R2's 299 L, for longer runs between fill-ups
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the D5R2's 54.2 kPa
Cons:
Standard blade is semi-U; the D5R2's six-way VPAT blade comes standard for fine grading, while a similar tilt blade is an extra option on the 2050M
Hydrostatic drive needs disciplined servicing, while the D5R2's powershift transmission is simpler for a general workshop to maintain
Cat's dealer and parts network in India is wider than CASE's for this class, which can matter for fast breakdown support
Cat D5R2
Pros:
Six-way VPAT blade control tilts, angles and pitches on its own, so one machine does rough dozing and finish grading
Optional ripper penetrates deeper, 475 mm against the 2050M's 438 mm, for breaking harder ground
Backed by Cat's wide dealer and parts network across India
Simple planetary powershift transmission that most workshops already know how to service
Cons:
Less powerful at 174 HP against the CASE 2050M's 218 HP
Smaller blade at 3.31 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Sinks a little more on soft ground, with ground bearing pressure at 54.2 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both are solid construction dozers, but they suit different jobs. The CASE 2050M has more engine power, a bigger blade and lower ground bearing pressure, so it moves more material per pass and works well on bigger cuts. The Cat D5R2 is smaller and built around its six-way VPAT blade, so it grades and finishes ground with more control, and it carries Cat's wide dealer network behind it. So match the machine to your work: CASE 2050M for bigger cuts and heavy pushing, Cat D5R2 for grading-led site work and finish levelling.
CASE 2050M Vs Cat D5R2 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Cat D5R2 is a 16-tonne construction crawler dozer with a 174 HP engine and 3.31 m³ blade. Its 54.2 kPa ground bearing pressure suits regular site work, while an optional 3-shank ripper reaches 475 mm for occasional light rock. Pry-out force reaches 125.8 kN for that breaking application. The machine is the smaller of Cat's two listed mid-range construction dozers. Its 299-litre fuel tank supports all-day grading, while ground clearance is 419 mm. The D5R2 focuses on controlled grading and site preparation rather than maximum material volume. SU, angle and VPAT blade configurations provide different working options. A landfill blade variant reaches 5.65 m³ for waste-handling applications. The Cat D5R2 bulldozer price is ₹95 lakh to ₹1.15 crore. Contractors working on smaller site-development projects can consider this dozer machine where blade control and regular grading matter. The optional ripper gives it some flexibility when soil changes to softer rock. Its operating weight remains below the D6R2, making it more suitable for smaller construction areas. Buyers can choose the D5R2 when the larger model would add unnecessary capacity. It provides a balanced combination of engine power, blade control and optional breaking capability for regular construction work.
Agency review
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Cat D5R2 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs Cat D5R2: which construction dozer fits your site?
The CASE 2050M is the bigger machine here, with a 218 HP engine, a 5.6 m³ blade and 360 kN of drawbar pull, so it pushes more material in every pass. The Cat D5R2 is smaller at 174 HP with a 3.31 m³ VPAT blade, but that blade tilts, angles and pitches on its own, so one machine handles rough dozing and fine grading. The D5R2 also sinks a little more on soft ground, since its ground bearing pressure is higher than the 2050M's.
Choose by the job, not the badge. For bigger cuts and site development where raw push and blade volume matter, the CASE 2050M is the steadier buy, and its hydrostatic drive keeps full power through tight turns. For grading-led work such as roads and drains, the Cat D5R2 and its VPAT blade make fine control easier, backed by Cat's wide dealer network. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the D5R2's 174 HP, with more torque for steady pushing
Bigger blade at 5.6 m³ against the D5R2's 3.31 m³, so it moves more material per pass
Heavier at 20,592 kg, which adds stability and traction against the D5R2's 16,032 kg
Higher drawbar pull at 360 kN for pulling through tough ground
Bigger fuel tank at 405 L against the D5R2's 299 L, for longer runs between fill-ups
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the D5R2's 54.2 kPa
Cons:
Standard blade is semi-U; the D5R2's six-way VPAT blade comes standard for fine grading, while a similar tilt blade is an extra option on the 2050M
Hydrostatic drive needs disciplined servicing, while the D5R2's powershift transmission is simpler for a general workshop to maintain
Cat's dealer and parts network in India is wider than CASE's for this class, which can matter for fast breakdown support
Cat D5R2
Pros:
Six-way VPAT blade control tilts, angles and pitches on its own, so one machine does rough dozing and finish grading
Optional ripper penetrates deeper, 475 mm against the 2050M's 438 mm, for breaking harder ground
Backed by Cat's wide dealer and parts network across India
Simple planetary powershift transmission that most workshops already know how to service
Cons:
Less powerful at 174 HP against the CASE 2050M's 218 HP
Smaller blade at 3.31 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Sinks a little more on soft ground, with ground bearing pressure at 54.2 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
Both are solid construction dozers, but they suit different jobs. The CASE 2050M has more engine power, a bigger blade and lower ground bearing pressure, so it moves more material per pass and works well on bigger cuts. The Cat D5R2 is smaller and built around its six-way VPAT blade, so it grades and finishes ground with more control, and it carries Cat's wide dealer network behind it. So match the machine to your work: CASE 2050M for bigger cuts and heavy pushing, Cat D5R2 for grading-led site work and finish levelling.
CASE 2050M Vs Cat D5R2 Dozer Price, Technical Specifications & Features
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
The Cat D5R2 is a 16-tonne construction crawler dozer with a 174 HP engine and 3.31 m³ blade. Its 54.2 kPa ground bearing pressure suits regular site work, while an optional 3-shank ripper reaches 475 mm for occasional light rock. Pry-out force reaches 125.8 kN for that breaking application. The machine is the smaller of Cat's two listed mid-range construction dozers. Its 299-litre fuel tank supports all-day grading, while ground clearance is 419 mm. The D5R2 focuses on controlled grading and site preparation rather than maximum material volume. SU, angle and VPAT blade configurations provide different working options. A landfill blade variant reaches 5.65 m³ for waste-handling applications. The Cat D5R2 bulldozer price is ₹95 lakh to ₹1.15 crore. Contractors working on smaller site-development projects can consider this dozer machine where blade control and regular grading matter. The optional ripper gives it some flexibility when soil changes to softer rock. Its operating weight remains below the D6R2, making it more suitable for smaller construction areas. Buyers can choose the D5R2 when the larger model would add unnecessary capacity. It provides a balanced combination of engine power, blade control and optional breaking capability for regular construction work.
72 differ · 5 identical
Key highlights: CASE 2050M vs Cat D5R2 Dozer
CASE 2050M
Cat D5R2
Engine Make
FPT Industria F4HE96848
Cat C7.1 ACERT
Rated Engine Power
160 kW (218 HP) @ 2200 rpm
130 kW (174 HP) @ 1700 rpm
Maximum Torque
1082 Nm @ 1500 rpm
NA
Max Forward Speed
9.3 (0-9.3) km/h
10.1 km/h
Max Drawbar Pull
360 kN
NA
Fuel Tank
405 L
299 L
Overall Width
3426 mm
3272 mm
Track Shoe Width
610 mm
560 mm
Ground Bearing Pressure
50.0 kPa (operating, 610 mm shoes)
54.2 kPa (XL VPAT, ISO 16754)
Blade Options
HSU (Semi-U) and PAT (Power Angle Tilt) blades
A, SU, VPAT; LGP VPAT 3.87; Landfill 5.65; Land Clearing 4.56 (m3)
Ripper
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
Questions buyers ask about the CASE 2050M vs Cat D5R2
Ans.
The CASE 2050M is more powerful. It has 218 HP against the D5R2's 174 HP, and its rated engine output is also higher at 160 kW against 130 kW. That extra power lets the 2050M push through denser material without slowing down.
Ans.
The CASE 2050M has the bigger blade, at 5.6 m³ against the Cat D5R2's 3.31 m³. So the 2050M moves more material in each pass, which helps on bigger cuts and stockpile work.
Ans.
The CASE 2050M is heavier, at 20,592 kg against the Cat D5R2's 16,032 kg. The extra weight adds grip and stability when pushing heavy loads on site.
Ans.
The CASE 2050M is a little easier on soft ground. Its ground bearing pressure is 50.0 kPa against the Cat D5R2's 54.2 kPa, so the 2050M spreads its weight over more track area and sinks less.
Ans.
The CASE 2050M has the bigger fuel tank, at 405 litres against the Cat D5R2's 299 litres. That lets the 2050M run longer between fill-ups on a full working day.
CASE 2050M Vs Cat D5R2 - Compare Price & Availability Across 600+ Locations in India
Compare CASE 2050M Vs Cat D5R2 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
