Contact Us



    Your Captcha*

    captcha

    Chat with us

    CASE 851 NX VS Tata Hitachi Shinrai Pro Backhoe Loader

    Add Equipment

    The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before macking any final decision.

    Key Highlights CASE 851 NXTata Hitachi Shinrai Pro
    CASE 851 NX VS Tata Hitachi Shinrai Pro Backhoe Loader
    CASE 851 NX
    CASE 851 NX

    ₹ 34 - 37 Lakhs

    Tata Hitachi Shinrai Price
    Tata Hitachi Shinrai Pro

    ₹ 29-34 Lakhs

    Particulars CASE 851 NX Tata Hitachi Shinrai Pro

    Overview Summary

    When comparing the CASE 851 NX CEV5 with the Tata Hitachi Shinrai Pro CEV5, the CASE model showcases higher gross power and torque, suggesting better performance in demanding tasks. The CASE also offers a superior bucket capacity and digging force. Conversely, the Tata Hitachi model emphasizes optimized fuel consumption and hydraulic system performance, along with a slightly greater load over height and an extended warranty.

    CASE 851 NX CEV5

    Pros:

    • Higher engine gross power of 74 HP at 2200 RPM
    • Greater maximum torque of 375 Nm at 1400 RPM
    • More advanced engine type with Turbocharged Intercooled electronic injection
    • Larger standard bucket capacity for excavator: 0.36/0.40 m³
    • Higher digging forces for bucket and arm
    • More extensive work equipment reach capabilities
    • Higher maximum speed of 34.0 km/hr
    • Larger fuel tank capacity at 129 L

    Cons:

    • Optional AC cabin
    • Higher machine weight could imply less maneuverability in certain conditions

    Tata Hitachi Shinrai Pro CEV5

    Pros:

    • Extended warranty of 1 Yr. / 2000 hr.
    • Innovative pump type with Electronically controlled Hydraulic System for optimized performance
    • Greater hydraulic system pressure at 265 bar
    • More efficient fuel consumption with EHS
    • Higher standard shovel capacity with 1.1 m³
    • Greater maximum lift capacity over height at 4200 mm

    Cons:

    • Lower engine gross power of 55 HP at 2200 RPM
    • Lower maximum torque of 225 Nm at 1400 RPM
    • Smaller standard bucket capacity for excavator: 0.26 m³
    • Less impressive breakout forces compared to CASE
    • Lower maximum speed at 30 km/hr
    • Smaller fuel tank capacity at 128 L

    Pros:

    Cons:

    Closing Recommendation

    If raw power and digging capabilities are the priority, the CASE 851 NX CEV5 may be the suitable choice. But for operations prioritizing fuel efficiency and warranty terms, the Tata Hitachi Shinrai Pro CEV5 could be more beneficial.

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Price, Technical Specifications & Features

    Brand CASE Backhoe Loader Tata Hitachi Backhoe Loader
    Type 2WD/4WD 2WD
    Price ₹ 34 - 37 Lakhs ₹ 29-34 Lakhs
    Engine CNH 74 HP TATA 55 HP
    Bucket 0.36 m³ 0.26 m³
    Shovel 1.1 m³ 1.1 m³
    Max Digging Depth 4700 mm 4700 mm
    Max Dump Height 2720 mm 2690 mm
    Weight 7800 kg 8450 Kg
    Quick Overview:

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    The Tata Hitachi Shinrai Pro Backhoe Loader is a cost-effective and practical machine designed for everyday construction and utility work. It features a 55 HP CEV5 engine, offering a good balance of performance and fuel savings for light to medium-duty tasks. The Shinrai Pro comes with multiple operating modes (Eco, Standard, Power), which help optimize fuel use based on workload. Its comfortable cabin, simple controls, and wide attachment options make it easy to operate for various job needs. With reliable performance and easy maintenance, it supports consistent daily operations. The Tata Hitachi Shinrai Pro price in India is expected to be around ₹29 to 34 lakh, making it a suitable choice for contractors looking for an affordable machine with steady productivity.

    Overview Summary

    When comparing the CASE 851 NX CEV5 with the Tata Hitachi Shinrai Pro CEV5, the CASE model showcases higher gross power and torque, suggesting better performance in demanding tasks. The CASE also offers a superior bucket capacity and digging force. Conversely, the Tata Hitachi model emphasizes optimized fuel consumption and hydraulic system performance, along with a slightly greater load over height and an extended warranty.

    CASE 851 NX CEV5

    Pros:

    • Higher engine gross power of 74 HP at 2200 RPM
    • Greater maximum torque of 375 Nm at 1400 RPM
    • More advanced engine type with Turbocharged Intercooled electronic injection
    • Larger standard bucket capacity for excavator: 0.36/0.40 m³
    • Higher digging forces for bucket and arm
    • More extensive work equipment reach capabilities
    • Higher maximum speed of 34.0 km/hr
    • Larger fuel tank capacity at 129 L

    Cons:

    • Optional AC cabin
    • Higher machine weight could imply less maneuverability in certain conditions

    Tata Hitachi Shinrai Pro CEV5

    Pros:

    • Extended warranty of 1 Yr. / 2000 hr.
    • Innovative pump type with Electronically controlled Hydraulic System for optimized performance
    • Greater hydraulic system pressure at 265 bar
    • More efficient fuel consumption with EHS
    • Higher standard shovel capacity with 1.1 m³
    • Greater maximum lift capacity over height at 4200 mm

    Cons:

    • Lower engine gross power of 55 HP at 2200 RPM
    • Lower maximum torque of 225 Nm at 1400 RPM
    • Smaller standard bucket capacity for excavator: 0.26 m³
    • Less impressive breakout forces compared to CASE
    • Lower maximum speed at 30 km/hr
    • Smaller fuel tank capacity at 128 L

    Pros:

    Cons:

    Closing Recommendation

    If raw power and digging capabilities are the priority, the CASE 851 NX CEV5 may be the suitable choice. But for operations prioritizing fuel efficiency and warranty terms, the Tata Hitachi Shinrai Pro CEV5 could be more beneficial.

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Price, Technical Specifications & Features

    CASE 851 NX Tata Hitachi Shinrai Pro
    Brand
    CASE Backhoe Loader Tata Hitachi Backhoe Loader
    Type
    2WD/4WD 2WD
    Price
    ₹ 34 - 37 Lakhs ₹ 29-34 Lakhs
    Engine
    CNH 74 HP TATA 55 HP
    Bucket
    0.36 m³ 0.26 m³
    Shovel
    1.1 m³ 1.1 m³
    Max Digging Depth
    4700 mm 4700 mm
    Max Dump Height
    2720 mm 2690 mm
    Weight
    7800 kg 8450 Kg
    Quick Overview:

    The CASE 851 NX Backhoe Loader is built for heavier and more demanding tasks, offering better digging depth and higher loading capacity. It has a 74 HP engine and is designed to handle large-scale construction, infrastructure, and excavation work efficiently. With a larger bucket, stronger structure, and advanced working modes, it provides higher productivity on site. The 851 NX Backhoe Loader from CASE also features a comfortable cabin, smart display, and telematics for better control and monitoring. Options like side-shift and center-pivot configurations offer flexibility based on job needs. The CASE 851 NX Backhoe Loader price in India usually falls between ₹38 and 45 lakh, making it suitable for contractors needing higher output, durability, and long-term performance.

    The Tata Hitachi Shinrai Pro Backhoe Loader is a cost-effective and practical machine designed for everyday construction and utility work. It features a 55 HP CEV5 engine, offering a good balance of performance and fuel savings for light to medium-duty tasks. The Shinrai Pro comes with multiple operating modes (Eco, Standard, Power), which help optimize fuel use based on workload. Its comfortable cabin, simple controls, and wide attachment options make it easy to operate for various job needs. With reliable performance and easy maintenance, it supports consistent daily operations. The Tata Hitachi Shinrai Pro price in India is expected to be around ₹29 to 34 lakh, making it a suitable choice for contractors looking for an affordable machine with steady productivity.

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Key Highlights

    CASE 851 NX Tata Hitachi Shinrai Pro
    Engine Make CNH Industrial (India) F28-CF28A001A*U Tata Motors 497D139
    Fuel Tank 129 L 128 L
    Max Torque 375 Nm @ 1400 RPM 225 Nm @ 1400 rpm
    Max Speed 34.0 km/hr 30 km/hr
    Hydraulic System 96 L NA
    Max Working Height 5700 mm 6050 mm
    Excavator Max Lift Capacity 1477 kg NA
    Loader Load Over Height 3800 mm 4200 mm
    Overall Length 6060 mm 6040 mm
    Wheel Base 2180 mm 2130 mm
    Bucket Digging Force 5000 kgf (204°) / 6550 kgf (160°) 6026 kgf
    Shovel Breakout Force 5000 kgf 5722 kgf
    Warranty 1 Year 1 Yr. / 2000 hr.
    AC Cabin Optional Optional
    GPS Standard Standard

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Key Highlights

    CASE 851 NX Tata Hitachi Shinrai Pro
    Engine Make
    CNH Industrial (India) F28-CF28A001A*U Tata Motors 497D139
    Fuel Tank
    129 L 128 L
    Max Torque
    375 Nm @ 1400 RPM 225 Nm @ 1400 rpm
    Max Speed
    34.0 km/hr 30 km/hr
    Hydraulic System
    96 L NA
    Max Working Height
    5700 mm 6050 mm
    Excavator Max Lift Capacity
    1477 kg NA
    Loader Load Over Height
    3800 mm 4200 mm
    Overall Length
    6060 mm 6040 mm
    Wheel Base
    2180 mm 2130 mm
    Bucket Digging Force
    5000 kgf (204°) / 6550 kgf (160°) 6026 kgf
    Shovel Breakout Force
    5000 kgf 5722 kgf
    Warranty
    1 Year 1 Yr. / 2000 hr.
    AC Cabin
    Optional Optional
    GPS
    Standard Standard

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Specifications

    Engine

    CASE 851 NX Tata Hitachi Shinrai Pro
    Model CNH 74 HP TATA 55 HP
    Type CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection CEV-5, Naturally Aspirated, 4 Cylinder, Water Cooled, CRDI Diesel Engine
    Gross Power 74 HP (54.6 kW) @ 2200 RPM 55 HP (41 kW) @ 2200 RPM
    Max Torque 375 Nm @ 1400 RPM 225 Nm @ 1400 rpm
    Displacement 2.80 L 3.784 L
    Battery 12V / 110 Ah 12 V / 150 Ah
    Alternator NA 120A

    Transmission

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission Equipped with Carraro-make synchro-shuttle transmission.

    Steering

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type Power Steering Hydraulic actuation with priority for smooth control.
    Working Pressure 140 bar NA

    Steering Turning Circle

    CASE 851 NX Tata Hitachi Shinrai Pro
    Inner Wheels Braked - Outside Loader Bucket 4600 mm (2WD) / 4900 (4WD) 11730 mm
    Inner Wheels Braked - Outside Wheels NA 8600 mm
    Inner Wheels not Braked - Outside Loader Bucket 5500 mm (2WD) / 5600 mm (4WD) NA
    Inner Wheels not Braked - Outside Wheels NA NA

    Brakes

    CASE 851 NX Tata Hitachi Shinrai Pro
    Service Hydraulic foot operated, 2 disc per side Oil-immersed wet disc; hydraulic-actuated with independent pedals for better control in narrow spaces
    Parking Mechanically actuated calipper type brake pack on rear axle input shaft Hand operated disc brake on the rear axle.

    Tyres

    CASE 851 NX Tata Hitachi Shinrai Pro
    Front 9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD) 9 x 16.16 PR
    Rear 16.9 x 28 - 12 PR 16.9 - 28 12 PR

    Speed

    CASE 851 NX Tata Hitachi Shinrai Pro
    Forward- 1st gear 5.7 km/hr 5 km/hr
    Reverse- 1st gear 7.0 km/hr 5 km/hr
    Forward- 2nd gear 9.3 km/hr 8 km/hr
    Reverse- 2nd gear 11.5 km/hr 9 km/hr
    Forward- 3rd gear 19.5 km/hr 17 km/hr
    Reverse- 3rd gear Not recommended Not recommended
    Forward- 4th gear 34.0 km/hr 30.0 km/hr
    Reverse- 4th gear Not Recommened Not Recommeded

    Hydraulics

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type Open Center Load Sensing , Variable Displacement Pump EHS (Electronically controlled Hydraulic System), Variable Displacement Pump with Electric Displacement Control and Load Sense to optimize performance & fuel consumption
    Maximum Pump Flow 143 L/min 105 L/min @ 1950 RPM
    System Pressure 240 bar 265 bar

    Axles

    CASE 851 NX Tata Hitachi Shinrai Pro
    Rear Axle CARRARO 28.32M Rear heavy-duty carraro axle high brake torque
    Front Axle CNH PS1300 (2WD) / NH 26.17M (4WD) Heavy-duty; non-powered axle

    Service Capacities

    CASE 851 NX Tata Hitachi Shinrai Pro
    Fuel Tank 129 L 128 L
    Engine Coolant 10 L 14.5 L
    Engine Oil 8.5 L 13.5 L
    Hydraulic Tank NA 65 L
    Hydraulic System 96 L NA
    Transmission 18 L (2WD) / 20 L (4WD) 16.0 L
    Rear Axle 17.1 L 17.1 L

    Excavator Performance

    CASE 851 NX Tata Hitachi Shinrai Pro
    Maximum Digging Depth 4700 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre 5900 mm 6880 mm
    Reach-Ground Level to Slew Centre 7220 mm 5440 mm
    Reach at Full Height to Slew Centre 2400 mm 2001 mm
    Side Reach to Centre Line of Machine NA 6050 mm
    Maximum Working Height 5700 mm 6050 mm
    Maximum Load Over Height 3800 mm 4200 mm
    Bucket Rotation Angle 204° & 160° 180°
    Bucket Digging force 5000 kgf (204°) / 6550 kgf (160°) 6026 kgf
    Arm Digging force 3900 kgf 3087 kgf
    Maximum Lift Capacity 1477 kg NA
    Standard Bucket Capacity 0.36 / 0.40 m³ 0.26 m³
    Standard Bucket Width NA 752 mm

    Loader Performance

    CASE 851 NX Tata Hitachi Shinrai Pro
    Dump Height 2720 mm 2690 mm
    Load Over Height 3300 mm 3305 mm
    Pin Height 3600 mm 3550 mm
    Pin Forward Reach 240 mm 360 mm
    Reach At Ground 1980 mm 1620 mm
    Maximum Reach at Full Height 1190 mm 1332 mm
    Max Reach Full Height Dumped 760 mm 840 mm
    Below Ground Level Dig Depth 110 mm 75 mm
    Rollback at Ground 33° 45°
    Dump Angle 45° 45°
    Shovel Breakout Force 5000 kgf 5722 kgf
    Loader Arm Breakout Force 5250 kgf 5139 kgf
    Maximum Payload 2050 kg 1800 kg

    Overall Dimensions And Weight

    CASE 851 NX Tata Hitachi Shinrai Pro
    Machine Weight 7800 kg 8230 - 8450 Kg
    Overall Length 6060 mm 6040 mm
    Wheelbase 2180 mm 2130 mm
    Slew Centre to Rear Axle Centre NA 1370 mm
    Minimum Ground Clearance 380 mm 320 mm
    Slew Ground Clearance NA 485 mm
    Height of Cabin 2830 mm 2940 mm
    Overall Height 3850 mm 3530 mm
    Track Width-Rear 1700 mm 1710 mm
    Track Width-Front 1880 mm 1900 mm
    Width Over Bucket 2280 mm 2354 mm

    CASE 851 NX Vs Tata Hitachi Shinrai Pro Backhoe Loader Specifications

    Engine

    CASE 851 NX Tata Hitachi Shinrai Pro
    Model
    CNH 74 HP TATA 55 HP
    Type
    CEV Emission Stage-V, 4 Cylinders, Turbocharged Intercooled, Electronic, Common Rail Direct Injection CEV-5, Naturally Aspirated, 4 Cylinder, Water Cooled, CRDI Diesel Engine
    Gross Power
    74 HP (54.6 kW) @ 2200 RPM 55 HP (41 kW) @ 2200 RPM
    Max Torque
    375 Nm @ 1400 RPM 225 Nm @ 1400 rpm
    Displacement
    2.80 L 3.784 L
    Battery
    12V / 110 Ah 12 V / 150 Ah
    Alternator
    NA 120A

    Transmission

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type
    CARRARO 2WD/4WD TLB1, 4F-4R Power Shuttle Synchromesh Transmission Equipped with Carraro-make synchro-shuttle transmission.

    Steering

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type
    Power Steering Hydraulic actuation with priority for smooth control.
    Working Pressure
    140 bar NA

    Steering Turning Circle

    CASE 851 NX Tata Hitachi Shinrai Pro
    Inner Wheels Braked - Outside Loader Bucket
    4600 mm (2WD) / 4900 (4WD) 11730 mm
    Inner Wheels Braked - Outside Wheels
    NA 8600 mm
    Inner Wheels not Braked - Outside Loader Bucket
    5500 mm (2WD) / 5600 mm (4WD) NA
    Inner Wheels not Braked - Outside Wheels
    NA NA

    Brakes

    CASE 851 NX Tata Hitachi Shinrai Pro
    Service
    Hydraulic foot operated, 2 disc per side Oil-immersed wet disc; hydraulic-actuated with independent pedals for better control in narrow spaces
    Parking
    Mechanically actuated calipper type brake pack on rear axle input shaft Hand operated disc brake on the rear axle.

    Tyres

    CASE 851 NX Tata Hitachi Shinrai Pro
    Front
    9x16 - 16PR (2WD) / 12.5x18 - 12PR (4WD) 9 x 16.16 PR
    Rear
    16.9 x 28 - 12 PR 16.9 - 28 12 PR

    Speed

    CASE 851 NX Tata Hitachi Shinrai Pro
    Forward- 1st gear
    5.7 km/hr 5 km/hr
    Reverse- 1st gear
    7.0 km/hr 5 km/hr
    Forward- 2nd gear
    9.3 km/hr 8 km/hr
    Reverse- 2nd gear
    11.5 km/hr 9 km/hr
    Forward- 3rd gear
    19.5 km/hr 17 km/hr
    Reverse- 3rd gear
    Not recommended Not recommended
    Forward- 4th gear
    34.0 km/hr 30.0 km/hr
    Reverse- 4th gear
    Not Recommened Not Recommeded

    Hydraulics

    CASE 851 NX Tata Hitachi Shinrai Pro
    Type
    Open Center Load Sensing , Variable Displacement Pump EHS (Electronically controlled Hydraulic System), Variable Displacement Pump with Electric Displacement Control and Load Sense to optimize performance & fuel consumption
    Maximum Pump Flow
    143 L/min 105 L/min @ 1950 RPM
    System Pressure
    240 bar 265 bar

    Axles

    CASE 851 NX Tata Hitachi Shinrai Pro
    Rear Axle
    CARRARO 28.32M Rear heavy-duty carraro axle high brake torque
    Front Axle
    CNH PS1300 (2WD) / NH 26.17M (4WD) Heavy-duty; non-powered axle

    Service Capacities

    CASE 851 NX Tata Hitachi Shinrai Pro
    Fuel Tank
    129 L 128 L
    Engine Coolant
    10 L 14.5 L
    Engine Oil
    8.5 L 13.5 L
    Hydraulic Tank
    NA 65 L
    Hydraulic System
    96 L NA
    Transmission
    18 L (2WD) / 20 L (4WD) 16.0 L
    Rear Axle
    17.1 L 17.1 L

    Excavator Performance

    CASE 851 NX Tata Hitachi Shinrai Pro
    Maximum Digging Depth
    4700 mm 4700 mm
    Reach-Ground Level to Rear Wheel Centre
    5900 mm 6880 mm
    Reach-Ground Level to Slew Centre
    7220 mm 5440 mm
    Reach at Full Height to Slew Centre
    2400 mm 2001 mm
    Side Reach to Centre Line of Machine
    NA 6050 mm
    Maximum Working Height
    5700 mm 6050 mm
    Maximum Load Over Height
    3800 mm 4200 mm
    Bucket Rotation Angle
    204° & 160° 180°
    Bucket Digging force
    5000 kgf (204°) / 6550 kgf (160°) 6026 kgf
    Arm Digging force
    3900 kgf 3087 kgf
    Maximum Lift Capacity
    1477 kg NA
    Standard Bucket Capacity
    0.36 / 0.40 m³ 0.26 m³
    Standard Bucket Width
    NA 752 mm

    Loader Performance

    CASE 851 NX Tata Hitachi Shinrai Pro
    Dump Height
    2720 mm 2690 mm
    Load Over Height
    3300 mm 3305 mm
    Pin Height
    3600 mm 3550 mm
    Pin Forward Reach
    240 mm 360 mm
    Reach At Ground
    1980 mm 1620 mm
    Maximum Reach at Full Height
    1190 mm 1332 mm
    Max Reach Full Height Dumped
    760 mm 840 mm
    Below Ground Level Dig Depth
    110 mm 75 mm
    Rollback at Ground
    33° 45°
    Dump Angle
    45° 45°
    Shovel Breakout Force
    5000 kgf 5722 kgf
    Loader Arm Breakout Force
    5250 kgf 5139 kgf
    Maximum Payload
    2050 kg 1800 kg

    Overall Dimensions And Weight

    CASE 851 NX Tata Hitachi Shinrai Pro
    Machine Weight
    7800 kg 8230 - 8450 Kg
    Overall Length
    6060 mm 6040 mm
    Wheelbase
    2180 mm 2130 mm
    Slew Centre to Rear Axle Centre
    NA 1370 mm
    Minimum Ground Clearance
    380 mm 320 mm
    Slew Ground Clearance
    NA 485 mm
    Height of Cabin
    2830 mm 2940 mm
    Overall Height
    3850 mm 3530 mm
    Track Width-Rear
    1700 mm 1710 mm
    Track Width-Front
    1880 mm 1900 mm
    Width Over Bucket
    2280 mm 2354 mm

    Popular Comparisons with CASE 851 NX

    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota E-Kubota BLX75
    4.5 rating
    ₹ 32 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 NX Magnum
    4.5 rating
    ₹ 33- 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra CE Mahindra Earthmaster VX
    4.5 rating
    ₹ 29.5 Lakhs Onwards
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Mahindra Earthmaster SX On Road Price
    Mahindra CE Mahindra Earthmaster SX
    4.5 rating
    ₹ 29.5 lakh onwards*
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE 770 Price
    CASE CASE 770 NX
    4.5 rating
    ₹ 33 - 36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT Ranger BSV
    4.5 rating
    ₹ 36-38 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou Manitou MBL 745 HT+ BS-V
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Manitou MBL 745 Price in India
    Manitou Manitou MBL 745 HT
    4.5 rating
    ₹ 29-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Escorts Kubota Escorts Digmax Super
    4.5 rating
    ₹ 35-37 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CAT 424 Backhoe Loader
    Caterpillar CAT 424
    4.5 rating
    ₹ 34-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX Plus
    4.5 rating
    ₹ 27-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    CASE CASE 770 EX
    4.5 rating
    ₹ 27 - 34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bobcat B900 2WD/4WD
    Bobcat Bobcat B900
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 130
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    ACE ACE AX 124
    4.5 rating
    ₹ 29-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB JCB 4DX
    4.5 rating
    ₹ 36-40 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX 74 HP Price
    JCB JCB 3DX Xtra
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Super
    JCB JCB 3DX Super
    4.5 rating
    ₹ 35 - 39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Plus 74 HP Price
    JCB JCB 3DX Plus
    4.5 rating
    ₹ 35-39 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    JCB 3DX Price
    JCB JCB 3DX
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Tata Hitachi Shinrai Prime 2WD/4WD
    Tata Hitachi Tata Hitachi Shinrai Prime
    4.5 rating
    ₹ 33-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull HD76 BS4 Heavy Duty
    4.5 rating
    ₹ 30-35 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull SD76 Price in India
    Bull Machines Bull SD76 BS5 Super Smart
    4.5 rating
    ₹ 30-36 Lakhs
    VS
    CASE CASE 851 NX
    4.5 rating
    ₹ 34 - 37 Lakhs
    Bull Machines Bull SD76 BS4 Champion
    4.5 rating
    ₹ 30-34 Lakhs

    Popular Comparisons with Tata Hitachi Shinrai Pro

    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Bull Machines BULL CH76 Challenger
    4.5 rating
    ₹ 28 - 30 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra Earthmaster SX
    Mahindra CE Mahindra Earthmaster SXE
    4.5 rating
    ₹ 27.5 lakh onwards*
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    BEML BEML BL9H 4×2
    4.5 rating
    ₹30 - 32 lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Manitou Manitou MBL 745 S
    4.5 rating
    ₹ 30-32 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Manitou Manitou MBL 745 Ranger
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra VX IV
    4.5 rating
    ₹ 23-28 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra SX IV
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Mahindra CE Mahindra SX Smart 50
    4.5 rating
    ₹ 31-33 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Escorts Kubota Escorts Digmax II
    4.5 rating
    ₹ 29-31 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Escorts Kubota Escorts Digmax II XP
    4.5 rating
    ₹ 32-34 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    CASE CASE 770 NXe Series
    4.5 rating
    ₹ 22-24 lakh
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    ACE ACE Phantom 2WD
    4.5 rating
    Price Available Soon
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    ACE ACE AX 124 Eco Master
    4.5 rating
    ₹ 27-30 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    JCB JCB 2DX
    4.5 rating
    ₹ 18-20 Lakhs
    VS
    Tata Hitachi Tata Hitachi Shinrai Pro
    4.5 rating
    ₹ 29-34 Lakhs
    Bull Machines Bull HD76 2WD
    4.5 rating
    ₹ 30-35 Lakhs

    CASE 851 NX Vs Tata Hitachi Shinrai Pro - Compare Price & Availability Across 600+ Locations in India

    Compare CASE 851 NX Vs Tata Hitachi Shinrai Pro price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.

    Maharashtra
    26 cities
    • Mumbai

    • Pune

    • Nagpur

    • Navi Mumbai

    • Thane

    • Nashik

    • Aurangabad (Chhatrapati Sambhajinagar)

    • Solapur

    • Kolhapur

    • Amravati

    • Chandrapur

    • Yavatmal

    • Latur

    • Dhule

    • Ahmednagar

    • Jalgaon

    • Raigad

    • Beed

    • Wardha

    • Palghar

    • Sangli

    • Ratnagiri

    • Satara

    • Nanded

    • Akola

    • Buldhana

    Gujarat
    21 cities
    • Ahmedabad

    • Gandhinagar

    • Surat

    • Vadodara

    • Rajkot

    • Bhavnagar

    • Jamnagar

    • Mundra

    • Kutch

    • Vapi

    • Anand

    • Mehsana

    • Morbi

    • Surendranagar

    • Amreli

    • Bharuch

    • Navsari

    • Dahej

    • Alang

    • Dholera

    • Gandhidham

    Goa
    5 cities
    • Panaji

    • Vasco da Gama

    • Margao

    • Calangute

    • Mormugao

    Disclaimer: *All logos, trademarks, brand names, images, videos, documents, and product information displayed on DesiMachines are the property of their respective owners. DesiMachines is an independent aggregator working with OEMs, authorised dealers, channel partners, and publicly available sources. Display of any brand or content does not imply partnership or endorsement. Product details, specifications, prices, and availability are indicative and subject to change. Users should verify final details with the respective dealer or seller. DesiMachines is not liable for any inaccuracies or decisions made based on the information provided.

    !

    Let's get started

    Disclaimer

    Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.

    Compare