LiuGong B160C vs Shantui DH16B3: the two differ on 65 of 77 listed specs. The main differences are Engine (Weichai 163 HP vs Weichai 170 HP), Operating Weight (17,000 kg vs 17,622 kg), Weight (17000 kg vs 17622 kg), Fuel Tank (350 L vs 432 L). The other 12 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
LiuGong B160C
Shantui DH16B3
LiuGong B160C
VS
Shantui DH16B3
Dozer
LiuGong B160C vs Shantui DH16B3: the two differ on 65 of 77 listed specs. The main differences are Engine (Weichai 163 HP vs Weichai 170 HP), Operating Weight (17,000 kg vs 17,622 kg), Weight (17000 kg vs 17622 kg), Fuel Tank (350 L vs 432 L). The other 12 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
LiuGong B160C
₹75 – 90 Lakh
Shantui DH16B3
₹75 – 90 Lakh
Particulars
LiuGong B160C
Shantui DH16B3
LiuGong B160C vs Shantui DH16B3: conventional dozer or hydrostatic grader-dozer?
The LiuGong B160C is a conventional powershift dozer at 163 HP with a bigger straight blade than the DH16B3, at 4.5 m³. The Shantui DH16B3 runs full hydrostatic drive with stepless speed control and a six-way adjustable PAT blade, so it can move between bulk pushing and finish grading in the same shift. The DH16B3 also sinks less on soft ground, based on its lower ground bearing pressure, and it is rated for 288 kN of drawbar pull, a figure the B160C does not list.
Both are construction dozers in the same power class. Pick the B160C for straightforward pushing where a simple driveline is enough. Pick the DH16B3 when the work mixes bulk pushing with grading and tight-site manoeuvring, backed by Shantui's wide Indian parts network. See the full dozer range or read the bulldozer guide for more help.
LiuGong B160C
Pros:
Bigger standard blade at 4.5 m³ against the DH16B3's 3.22 m³
Simple conventional powershift driveline, familiar to most local mechanics
Wider overall width than the DH16B3
Straightforward setup suited to bulk pushing and general earthwork
Cons:
Less powerful at 163 HP against the DH16B3's 170 HP
No ripper or drawbar pull figure listed, unlike the DH16B3's stated 288 kN
Higher ground bearing pressure than the DH16B3, sinks more on soft ground
No PAT-style adjustable blade for finish grading work
Shantui DH16B3
Pros:
More powerful at 170 HP with higher maximum torque than the B160C
Full hydrostatic drive gives stepless speed control and smooth power turns
Six-way adjustable PAT blade handles both bulk pushing and finish grading
Rated for 288 kN of drawbar pull
Lower ground bearing pressure, sinks less on soft ground than the B160C
Larger 432-litre fuel tank supports longer shifts
Cons:
Smaller standard blade at 3.22 m³ against the B160C's 4.5 m³
Heavier at 17,622 kg than the B160C
Needs trained service and genuine parts to keep the hydrostatic drive running well
Shorter track record in the field than Shantui's long-running conventional models
Pros:
Cons:
Closing Recommendation
The LiuGong B160C offers a bigger standard blade and a simple conventional driveline that is easy to service anywhere, which suits straightforward bulk pushing. The Shantui DH16B3 adds hydrostatic drive, a rated drawbar pull figure and an adjustable PAT blade that also handles finish grading, and it sinks less on soft ground. So match the machine to your work: LiuGong B160C for straightforward bulk pushing and general earthwork, Shantui DH16B3 for mixed pushing and grading work on tighter sites.
LiuGong B160C Vs Shantui DH16B3 Dozer Price, Technical Specifications & Features
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
Agency review
Planning to buy the LiuGong B160C Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Shantui DH16B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
LiuGong B160C vs Shantui DH16B3: conventional dozer or hydrostatic grader-dozer?
The LiuGong B160C is a conventional powershift dozer at 163 HP with a bigger straight blade than the DH16B3, at 4.5 m³. The Shantui DH16B3 runs full hydrostatic drive with stepless speed control and a six-way adjustable PAT blade, so it can move between bulk pushing and finish grading in the same shift. The DH16B3 also sinks less on soft ground, based on its lower ground bearing pressure, and it is rated for 288 kN of drawbar pull, a figure the B160C does not list.
Both are construction dozers in the same power class. Pick the B160C for straightforward pushing where a simple driveline is enough. Pick the DH16B3 when the work mixes bulk pushing with grading and tight-site manoeuvring, backed by Shantui's wide Indian parts network. See the full dozer range or read the bulldozer guide for more help.
LiuGong B160C
Pros:
Bigger standard blade at 4.5 m³ against the DH16B3's 3.22 m³
Simple conventional powershift driveline, familiar to most local mechanics
Wider overall width than the DH16B3
Straightforward setup suited to bulk pushing and general earthwork
Cons:
Less powerful at 163 HP against the DH16B3's 170 HP
No ripper or drawbar pull figure listed, unlike the DH16B3's stated 288 kN
Higher ground bearing pressure than the DH16B3, sinks more on soft ground
No PAT-style adjustable blade for finish grading work
Shantui DH16B3
Pros:
More powerful at 170 HP with higher maximum torque than the B160C
Full hydrostatic drive gives stepless speed control and smooth power turns
Six-way adjustable PAT blade handles both bulk pushing and finish grading
Rated for 288 kN of drawbar pull
Lower ground bearing pressure, sinks less on soft ground than the B160C
Larger 432-litre fuel tank supports longer shifts
Cons:
Smaller standard blade at 3.22 m³ against the B160C's 4.5 m³
Heavier at 17,622 kg than the B160C
Needs trained service and genuine parts to keep the hydrostatic drive running well
Shorter track record in the field than Shantui's long-running conventional models
Pros:
Cons:
Closing Recommendation
The LiuGong B160C offers a bigger standard blade and a simple conventional driveline that is easy to service anywhere, which suits straightforward bulk pushing. The Shantui DH16B3 adds hydrostatic drive, a rated drawbar pull figure and an adjustable PAT blade that also handles finish grading, and it sinks less on soft ground. So match the machine to your work: LiuGong B160C for straightforward bulk pushing and general earthwork, Shantui DH16B3 for mixed pushing and grading work on tighter sites.
LiuGong B160C Vs Shantui DH16B3 Dozer Price, Technical Specifications & Features
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
65 differ · 12 identical
Key highlights: LiuGong B160C vs Shantui DH16B3 Dozer
LiuGong B160C
Shantui DH16B3
Engine Make
Weichai WD10G178E25
Weichai WD10
Rated Engine Power
120 kW (163 HP) @ 1850 rpm
127 kW (170 HP) @ 1800 rpm
Maximum Torque
830 Nm
900 Nm @ 1400-1600 rpm
Max Forward Speed
10.6 km/h
10 (0-10) km/h
Max Drawbar Pull
NA
288 kN
Fuel Tank
350 L
432 L
Overall Width
3422 mm
3300 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
67 kPa
52 kPa
Blade Options
Straight (referenced)
PAT std (six-way adjustable)
Ripper
NA
NA (machine length quoted without ripper; ripper spec not stated)
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 Months
Key highlights: LiuGong B160C vs Shantui DH16B3 Dozer
LiuGong B160C
Shantui DH16B3
Engine Make
Weichai WD10G178E25
Weichai WD10
Rated Engine Power
120 kW (163 HP) @ 1850 rpm
127 kW (170 HP) @ 1800 rpm
Maximum Torque
830 Nm
900 Nm @ 1400-1600 rpm
Max Forward Speed
10.6 km/h
10 (0-10) km/h
Max Drawbar Pull
NA
288 kN
Fuel Tank
350 L
432 L
Overall Width
3422 mm
3300 mm
Track Shoe Width
510 mm
560 mm
Ground Bearing Pressure
67 kPa
52 kPa
Blade Options
Straight (referenced)
PAT std (six-way adjustable)
Ripper
NA
NA (machine length quoted without ripper; ripper spec not stated)
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 Months
Full specifications: LiuGong B160C vs Shantui DH16B3 Dozer
Engine
26814
26825
Model
Weichai WD10G178E25
Weichai WD10
Fuel
Diesel
Diesel
Type
4-stroke, water-cooled, turbocharged, direct injection
NA
No. of Cylinders
6
6
Piston Displacement
9.726 L
9.7 L
Rated Engine Power
120 kW (163 HP) @ 1,850 rpm
127 kW (170 HP) @ 1,800 rpm
Maximum Torque
830 Nm
900 Nm @ 1,400-1,600 rpm
Transmission
26814
26825
Transmission Type
Power shift
Independent dual-circuit electronic-control hydrostatic (Linde), stepless variable speed, mono-lever control
Torque Converter
Yes (power shift)
None (hydrostatic)
Speeds (F/R)
3F / 3R
Infinitely variable
Max Forward Speed
10.6 km/h
10 (0-10) km/h
Max Reverse Speed
13.6 km/h
10 (0-10) km/h
Final Drive
NA
Primary spur gear + primary planetary reduction
Performance
26814
26825
Max Drawbar Pull
NA
288 kN
Gradeability
NA
30 °
Min Turning Radius
NA
3,900 mm
Steering & Brakes
26814
26825
Steering Type
NA
Independent drive of each track; full-power pivot steering and steering with load
Questions buyers ask about the LiuGong B160C vs Shantui DH16B3
Ans.
The Shantui DH16B3 is more powerful. It runs at 170 HP against the B160C's 163 HP, with higher maximum torque as well. It is also the slightly heavier machine of the two, which suits it to steadier, heavier pushing work.
Ans.
The LiuGong B160C has a bigger standard blade, at 4.5 m³ against the DH16B3's 3.22 m³. The DH16B3 trades some blade capacity for its adjustable PAT blade, which is built more for fine grading than for pure bulk pushing work.
Ans.
The Shantui DH16B3 sinks less. Its ground bearing pressure is lower than the B160C's, which helps when working on loose fill or freshly turned soil where a heavier footprint could get stuck mid-push and slow the whole day's job down.
Ans.
PAT stands for a six-way adjustable blade that can angle, tilt and pitch. This lets the DH16B3 handle finish grading work that a fixed straight blade like the B160C's cannot do as easily, useful when the same machine must both push and finish grade.
Ans.
Yes, the DH16B3 is rated at 288 kN of drawbar pull. The LiuGong B160C does not list a drawbar pull figure, so this is one of the clearer performance numbers between the two machines when comparing raw pulling force on site.
Ans.
The LiuGong B160C is simpler to service. Its conventional powershift driveline is familiar to most local mechanics, while the DH16B3's hydrostatic drive needs trained service and genuine parts to keep it running well over its full working life on site.
LiuGong B160C Vs Shantui DH16B3 - Compare Price & Availability Across 600+ Locations in India
Compare LiuGong B160C Vs Shantui DH16B3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
