Shantui DH16B3 vs LiuGong B230: the two differ on 65 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Cummins 230 HP), Price (₹75 – 90 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,622 kg vs 24,540 kg), Weight (17622 kg vs 24540 kg). The other 12 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH16B3
LiuGong B230
Shantui DH16B3
VS
LiuGong B230
Dozer
Shantui DH16B3 vs LiuGong B230: the two differ on 65 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Cummins 230 HP), Price (₹75 – 90 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,622 kg vs 24,540 kg), Weight (17622 kg vs 24540 kg). The other 12 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH16B3
₹75 – 90 Lakh
LiuGong B230
₹1.10 – 1.30 Cr
Particulars
Shantui DH16B3
LiuGong B230
LiuGong B230 vs Shantui DH16B3: bulk pusher or finishing dozer?
The LiuGong B230 is the bigger machine across the board: 230 HP against 170 HP, 24,540 kg against 17,622 kg, and a 7.8 m³ blade against 3.22 m³ on the Shantui DH16B3. The B230 runs a licensed Cummins engine on a conventional powershift transmission, with no ripper listed. The DH16B3 is the lighter, more manoeuvrable machine, built around a Linde hydrostatic drive with stepless speed control and a PAT (power angle tilt) blade that is six-way adjustable, useful for finishing and grading work the B230 was not designed for. Its ground bearing pressure is also lower, so it sinks less on soft, freshly worked ground.
Choose the B230 for bulk pushing and site development where blade size and pushing weight decide daily output. Choose the DH16B3 where the work mixes bulk pushing with finish grading in tighter spaces, and where a hydrostatic drive's smoothness matters more than raw size. Both are construction dozers in our dozer range. Compare more models on the dozer comparison hub, or start with the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the DH16B3's 170 HP
Bigger blade at 7.8 m³, moves more material per pass
Heavier at 24,540 kg, giving more mass for pure pushing power
Larger 480-litre fuel tank for longer shifts
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it cannot break up hard ground on its own
Higher ground bearing pressure at 83.1 kPa, sinks more on soft ground than the DH16B3
Fixed straight blade, without the six-way PAT adjustment of the DH16B3
Conventional powershift transmission, without hydrostatic smoothness
Shantui DH16B3
Pros:
Rated drawbar pull of 288 kN for a machine this size
Six-way adjustable PAT blade suits both bulk pushing and finishing work
Lower ground bearing pressure at 52 kPa, sinks less on soft ground
Dual-circuit Linde hydrostatic drive gives stepless speed control and single-lever steering
ECO and Driving Response modes let the driver trade fuel use against output
Cons:
Smaller blade at 3.22 m³, moves less material per pass than the B230
Less powerful at 170 HP and lighter at 17,622 kg
No dedicated ripper configuration is stated, so hard patches need a separate approach
Smaller 432-litre fuel tank than the B230
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice for bulk pushing and site development, where raw blade size and pushing weight decide how much ground gets covered in a day. The Shantui DH16B3 suits work that mixes bulk pushing with finish grading in tighter sites, since its hydrostatic drive and six-way adjustable blade give it more control than a bigger, simpler pusher. So match the machine to your work: LiuGong B230 for bulk pushing and large site development, Shantui DH16B3 for mixed grading and finishing work in tighter spaces.
Shantui DH16B3 Vs LiuGong B230 Dozer Price, Technical Specifications & Features
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
Agency review
Planning to buy the Shantui DH16B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the LiuGong B230 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
LiuGong B230 vs Shantui DH16B3: bulk pusher or finishing dozer?
The LiuGong B230 is the bigger machine across the board: 230 HP against 170 HP, 24,540 kg against 17,622 kg, and a 7.8 m³ blade against 3.22 m³ on the Shantui DH16B3. The B230 runs a licensed Cummins engine on a conventional powershift transmission, with no ripper listed. The DH16B3 is the lighter, more manoeuvrable machine, built around a Linde hydrostatic drive with stepless speed control and a PAT (power angle tilt) blade that is six-way adjustable, useful for finishing and grading work the B230 was not designed for. Its ground bearing pressure is also lower, so it sinks less on soft, freshly worked ground.
Choose the B230 for bulk pushing and site development where blade size and pushing weight decide daily output. Choose the DH16B3 where the work mixes bulk pushing with finish grading in tighter spaces, and where a hydrostatic drive's smoothness matters more than raw size. Both are construction dozers in our dozer range. Compare more models on the dozer comparison hub, or start with the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the DH16B3's 170 HP
Bigger blade at 7.8 m³, moves more material per pass
Heavier at 24,540 kg, giving more mass for pure pushing power
Larger 480-litre fuel tank for longer shifts
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it cannot break up hard ground on its own
Higher ground bearing pressure at 83.1 kPa, sinks more on soft ground than the DH16B3
Fixed straight blade, without the six-way PAT adjustment of the DH16B3
Conventional powershift transmission, without hydrostatic smoothness
Shantui DH16B3
Pros:
Rated drawbar pull of 288 kN for a machine this size
Six-way adjustable PAT blade suits both bulk pushing and finishing work
Lower ground bearing pressure at 52 kPa, sinks less on soft ground
Dual-circuit Linde hydrostatic drive gives stepless speed control and single-lever steering
ECO and Driving Response modes let the driver trade fuel use against output
Cons:
Smaller blade at 3.22 m³, moves less material per pass than the B230
Less powerful at 170 HP and lighter at 17,622 kg
No dedicated ripper configuration is stated, so hard patches need a separate approach
Smaller 432-litre fuel tank than the B230
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice for bulk pushing and site development, where raw blade size and pushing weight decide how much ground gets covered in a day. The Shantui DH16B3 suits work that mixes bulk pushing with finish grading in tighter sites, since its hydrostatic drive and six-way adjustable blade give it more control than a bigger, simpler pusher. So match the machine to your work: LiuGong B230 for bulk pushing and large site development, Shantui DH16B3 for mixed grading and finishing work in tighter spaces.
Shantui DH16B3 Vs LiuGong B230 Dozer Price, Technical Specifications & Features
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
65 differ · 12 identical
Key highlights: Shantui DH16B3 vs LiuGong B230 Dozer
Shantui DH16B3
LiuGong B230
Engine Make
Weichai WD10
Chongqing Cummins NT855C280S20
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
172 kW (230 HP) @ 2000 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1050 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
11.82 km/h
Max Drawbar Pull
288 kN
NA
Fuel Tank
432 L
480 L
Overall Width
3300 mm
3725 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
52 kPa
83.1 kPa
Blade Options
PAT std (six-way adjustable)
Straight (referenced)
Ripper
NA (machine length quoted without ripper; ripper spec not stated)
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH16B3 vs LiuGong B230 Dozer
Shantui DH16B3
LiuGong B230
Engine Make
Weichai WD10
Chongqing Cummins NT855C280S20
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
172 kW (230 HP) @ 2000 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
1050 Nm @ 1400 rpm
Max Forward Speed
10 (0-10) km/h
11.82 km/h
Max Drawbar Pull
288 kN
NA
Fuel Tank
432 L
480 L
Overall Width
3300 mm
3725 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
52 kPa
83.1 kPa
Blade Options
PAT std (six-way adjustable)
Straight (referenced)
Ripper
NA (machine length quoted without ripper; ripper spec not stated)
NA
AC Cabin
NA
NA
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH16B3 vs LiuGong B230 Dozer
Engine
26825
26815
Model
Weichai WD10
Chongqing Cummins NT855C280S20
Fuel
Diesel
Diesel
Type
NA
Turbocharged, air-to-air aftercooled
No. of Cylinders
6
6
Piston Displacement
9.7 L
14.0 L
Rated Engine Power
127 kW (170 HP) @ 1,800 rpm
172 kW (230 HP) @ 2,000 rpm
Maximum Torque
900 Nm @ 1,400-1,600 rpm
1,050 Nm @ 1,400 rpm
Transmission
26825
26815
Transmission Type
Independent dual-circuit electronic-control hydrostatic (Linde), stepless variable speed, mono-lever control
Power shift
Torque Converter
None (hydrostatic)
Yes (power shift)
Speeds (F/R)
Infinitely variable
3F / 3R
Max Forward Speed
10 (0-10) km/h
11.82 km/h
Max Reverse Speed
10 (0-10) km/h
14.3 km/h
Final Drive
Primary spur gear + primary planetary reduction
NA
Performance
26825
26815
Max Drawbar Pull
288 kN
NA
Gradeability
30 °
NA
Min Turning Radius
3,900 mm
NA
Steering & Brakes
26825
26815
Steering Type
Independent drive of each track; full-power pivot steering and steering with load
Questions buyers ask about the Shantui DH16B3 vs LiuGong B230
Ans.
The LiuGong B230 is more powerful, at 230 HP against the DH16B3's 170 HP. It is also heavier, at 24,540 kg against 17,622 kg, and carries a bigger 7.8 m³ blade against 3.22 m³, so it moves more material in a single pass.
Ans.
The Shantui DH16B3 lists a rated drawbar pull of 288 kN. The LiuGong B230's drawbar pull is not published in its specifications, so buyers should judge its pushing force mainly from its weight and blade size instead.
Ans.
The Shantui DH16B3's PAT (power angle tilt) blade is six-way adjustable, letting the driver angle and pitch it for grading and finishing. The LiuGong B230 runs a fixed straight blade with no listed angle adjustment, so it stays better suited to straight pushing.
Ans.
The Shantui DH16B3 sinks less. Its ground bearing pressure is 52 kPa against the B230's 83.1 kPa. Neither machine is built for very soft or wet fill, so check ground conditions with your dealer on marginal sites before deciding.
Ans.
The Shantui DH16B3 does. Its dual-circuit Linde hydrostatic drive gives stepless speed control and single-lever steering, useful for manoeuvring around obstacles. The LiuGong B230 uses a conventional powershift transmission instead, which is simpler but less forgiving in tight corners.
Ans.
The LiuGong B230 has the bigger tank, at 480 litres against the DH16B3's 432 litres. That supports longer continuous bulk-pushing shifts before a refuel stop, useful on large sites without a fuel bowser nearby.
Shantui DH16B3 Vs LiuGong B230 - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH16B3 Vs LiuGong B230 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
