LiuGong B160C vs CASE 2050M: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 163 HP vs FPT 218 HP), Price (₹75 – 90 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,000 kg vs 20,592 kg), Weight (17000 kg vs 20592 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
LiuGong B160C
CASE 2050M
LiuGong B160C
VS
CASE 2050M
Dozer
LiuGong B160C vs CASE 2050M: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 163 HP vs FPT 218 HP), Price (₹75 – 90 Lakh vs ₹1.10 – 1.30 Cr), Operating Weight (17,000 kg vs 20,592 kg), Weight (17000 kg vs 20592 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
LiuGong B160C
₹75 – 90 Lakh
CASE 2050M
₹1.10 – 1.30 Cr
Particulars
LiuGong B160C
CASE 2050M
CASE 2050M vs LiuGong B160C: which construction dozer fits your site?
The CASE 2050M is the bigger machine across the board, at 218 HP against the LiuGong B160C's 163 HP, 20,592 kg against 17,000 kg, and a 5.6 m³ blade against 4.5 m³. The 2050M also carries more fuel, at 405 litres against 350 litres. The B160C is the lighter machine, but it sinks more on soft ground, since its ground bearing pressure runs higher than the 2050M's.
Match the machine to your budget and your ground. For bigger cuts and steady production work where more power, torque and blade volume pay off, the CASE 2050M is the stronger pick, and its hydrostatic drive holds full power through tight turns. For smaller sites and lighter grading where a simpler, lower-cost machine gets the job done, the B160C from LiuGong is a straightforward option. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the B160C's 163 HP
More torque at 1,082 Nm against the B160C's 830 Nm
Bigger blade at 5.6 m³ against the B160C's 4.5 m³, so it moves more material per pass
Heavier at 20,592 kg, which helps it hold ground under load against the B160C's 17,000 kg
Bigger fuel tank at 405 L against the B160C's 350 L
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the B160C's 67 kPa
Cons:
Hydrostatic drive needs disciplined servicing, while the B160C runs a simpler mechanical drivetrain
LiuGong's parts and dealer network in India is smaller than the more established brands in this class
LiuGong B160C
Pros:
Lighter machine at 17,000 kg, which can make it easier to trailer and move between sites
Simpler mechanical drivetrain that a general workshop can service without hydrostatic expertise
Good fit if you already run LiuGong loaders, since parts and service stay with one brand
Cons:
Less powerful at 163 HP against the CASE 2050M's 218 HP
Less torque at 830 Nm against the 2050M's 1,082 Nm
Smaller blade at 4.5 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Sinks more on soft ground, with ground bearing pressure at 67 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two sit in different weight classes, so the choice is really about the scale of your work. The CASE 2050M pushes harder, carries more material per pass and sinks less on soft ground, which suits bigger cuts and production work. The LiuGong B160C is lighter and simpler, which suits smaller sites and lighter grading where a straightforward machine is enough. So match the machine to your work: CASE 2050M for bigger cuts and production earthwork, LiuGong B160C for smaller sites and lighter grading.
LiuGong B160C Vs CASE 2050M Dozer Price, Technical Specifications & Features
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
Agency review
Planning to buy the LiuGong B160C Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the CASE 2050M Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
CASE 2050M vs LiuGong B160C: which construction dozer fits your site?
The CASE 2050M is the bigger machine across the board, at 218 HP against the LiuGong B160C's 163 HP, 20,592 kg against 17,000 kg, and a 5.6 m³ blade against 4.5 m³. The 2050M also carries more fuel, at 405 litres against 350 litres. The B160C is the lighter machine, but it sinks more on soft ground, since its ground bearing pressure runs higher than the 2050M's.
Match the machine to your budget and your ground. For bigger cuts and steady production work where more power, torque and blade volume pay off, the CASE 2050M is the stronger pick, and its hydrostatic drive holds full power through tight turns. For smaller sites and lighter grading where a simpler, lower-cost machine gets the job done, the B160C from LiuGong is a straightforward option. Both sit in our construction dozers range inside the dozer lineup. New to dozers? Read the bulldozer guide first.
CASE 2050M
Pros:
Stronger engine at 218 HP against the B160C's 163 HP
More torque at 1,082 Nm against the B160C's 830 Nm
Bigger blade at 5.6 m³ against the B160C's 4.5 m³, so it moves more material per pass
Heavier at 20,592 kg, which helps it hold ground under load against the B160C's 17,000 kg
Bigger fuel tank at 405 L against the B160C's 350 L
Lower ground bearing pressure at 50.0 kPa, so it sinks less on soft ground than the B160C's 67 kPa
Cons:
Hydrostatic drive needs disciplined servicing, while the B160C runs a simpler mechanical drivetrain
LiuGong's parts and dealer network in India is smaller than the more established brands in this class
LiuGong B160C
Pros:
Lighter machine at 17,000 kg, which can make it easier to trailer and move between sites
Simpler mechanical drivetrain that a general workshop can service without hydrostatic expertise
Good fit if you already run LiuGong loaders, since parts and service stay with one brand
Cons:
Less powerful at 163 HP against the CASE 2050M's 218 HP
Less torque at 830 Nm against the 2050M's 1,082 Nm
Smaller blade at 4.5 m³ against the 2050M's 5.6 m³, so it moves less material per pass
Sinks more on soft ground, with ground bearing pressure at 67 kPa against the 2050M's 50.0 kPa
Pros:
Cons:
Closing Recommendation
These two sit in different weight classes, so the choice is really about the scale of your work. The CASE 2050M pushes harder, carries more material per pass and sinks less on soft ground, which suits bigger cuts and production work. The LiuGong B160C is lighter and simpler, which suits smaller sites and lighter grading where a straightforward machine is enough. So match the machine to your work: CASE 2050M for bigger cuts and production earthwork, LiuGong B160C for smaller sites and lighter grading.
LiuGong B160C Vs CASE 2050M Dozer Price, Technical Specifications & Features
The LiuGong B160C is a 17-tonne construction crawler dozer with a 163 HP engine and a 4.5 m³ blade. Its blade capacity gives it useful material-moving ability for the operating weight. There is no ripper listed, so the machine remains focused on pushing, grading and spreading. Ground bearing pressure of 67 kPa makes reasonably settled ground a better fit than fresh soft fill. The B160C is the smaller of LiuGong's two listed dozers, with the B230 providing considerably more blade capacity. Contractors working on smaller sites can therefore avoid carrying the extra size of the larger machine. Land clearing ahead of construction and rough site grading are suitable applications. The LiuGong B160C bulldozer price is ₹75 lakh to ₹90 lakh. A contractor preparing plots before larger equipment arrives can use the dozer machine for regular material movement. Its straightforward setup suits buyers who do not require ripping as part of daily work. The 4.5 m³ blade provides useful output without moving into the heavier construction class. Buyers can consider it for local civil work, land clearing and general site preparation. Its operating weight also keeps it suitable for projects where larger crawler dozers would be unnecessary. The B160C is a practical option for straightforward construction earthwork.
The CASE 2050M is a 20.6-tonne construction crawler dozer with a 218 HP engine. Its 5.6 m³ blade handles larger site-development cuts, while the 360 kN drawbar pull provides strong pushing force through heavy subgrade. An optional 3-shank parallel ripper offers five adjustable positions and reaches 438 mm. This allows operators to change the ripping setup when ground conditions vary. Ground bearing pressure is 50.0 kPa on 610 mm track shoes, helping maintain stability across construction surfaces. A 405-litre fuel tank supports full-shift operation, and ground clearance is 362 mm. The 2050M is the largest of CASE's three listed dozers. Highway work and large-plot development are suitable applications where its additional capacity can be used regularly. The CASE 2050M bulldozer price is ₹1.10 crore to ₹1.30 crore. A real-estate developer preparing a large plot can consider this dozer machine when smaller CASE models no longer provide enough blade volume. The adjustable ripper also gives contractors flexibility without changing the primary machine. Its operating weight keeps it within the construction class. Buyers can compare expected grading volume against the 1650L before moving up to this model. The 2050M suits contractors who need stronger pushing, larger blade capacity and occasional ripping in one crawler dozer.
69 differ · 8 identical
Key highlights: LiuGong B160C vs CASE 2050M Dozer
LiuGong B160C
CASE 2050M
Engine Make
Weichai WD10G178E25
FPT Industria F4HE96848
Rated Engine Power
120 kW (163 HP) @ 1850 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
830 Nm
1082 Nm @ 1500 rpm
Max Forward Speed
10.6 km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
NA
360 kN
Fuel Tank
350 L
405 L
Overall Width
3422 mm
3426 mm
Track Shoe Width
510 mm
610 mm
Ground Bearing Pressure
67 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Straight (referenced)
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
NA
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 Months
Key highlights: LiuGong B160C vs CASE 2050M Dozer
LiuGong B160C
CASE 2050M
Engine Make
Weichai WD10G178E25
FPT Industria F4HE96848
Rated Engine Power
120 kW (163 HP) @ 1850 rpm
160 kW (218 HP) @ 2200 rpm
Maximum Torque
830 Nm
1082 Nm @ 1500 rpm
Max Forward Speed
10.6 km/h
9.3 (0-9.3) km/h
Max Drawbar Pull
NA
360 kN
Fuel Tank
350 L
405 L
Overall Width
3422 mm
3426 mm
Track Shoe Width
510 mm
610 mm
Ground Bearing Pressure
67 kPa
50.0 kPa (operating, 610 mm shoes)
Blade Options
Straight (referenced)
HSU (Semi-U) and PAT (Power Angle Tilt) blades
Ripper
NA
Optional 3-shank parallel ripper (5 positions); 1;355 kg add-on; max penetration 438 mm
AC Cabin
NA
Standard
Warranty
12 months / 2000 hrs
12 Months
Full specifications: LiuGong B160C vs CASE 2050M Dozer
Engine
26814
26827
Model
Weichai WD10G178E25
FPT Industria F4HE96848 (NEF family)l
Fuel
Diesel
Diesel
Type
4-stroke, water-cooled, turbocharged, direct injection
Direct common rail; turbocharged, air-to-air intercooled
Questions buyers ask about the LiuGong B160C vs CASE 2050M
Ans.
The CASE 2050M is more powerful. It has 218 HP against the B160C's 163 HP, and its maximum torque is also higher at 1,082 Nm against 830 Nm. That extra power lets the 2050M push through denser material without slowing down.
Ans.
The CASE 2050M has the bigger blade, at 5.6 m³ against the LiuGong B160C's 4.5 m³. So the 2050M carries more material in each pass.
Ans.
The CASE 2050M is heavier, at 20,592 kg against the LiuGong B160C's 17,000 kg. The extra weight helps the 2050M hold its ground under heavy pushing.
Ans.
The CASE 2050M is easier on soft ground. Its ground bearing pressure is 50.0 kPa against the LiuGong B160C's 67 kPa, so the 2050M spreads its weight over more track area and sinks less.
Ans.
The CASE 2050M has the bigger fuel tank, at 405 litres against the LiuGong B160C's 350 litres. That lets the 2050M run longer between fill-ups on a full working day.
LiuGong B160C Vs CASE 2050M - Compare Price & Availability Across 600+ Locations in India
Compare LiuGong B160C Vs CASE 2050M price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
