Shantui DH16B3 vs SEM 818F: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 188 HP), Price (₹75 – 90 Lakh vs ₹70 – 85 Lakh), Operating Weight (17,622 kg vs 16,950 kg), Weight (17622 kg vs 16950 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
Shantui DH16B3
SEM 818F
Shantui DH16B3
VS
SEM 818F
Dozer
Shantui DH16B3 vs SEM 818F: the two differ on 69 of 77 listed specs. The main differences are Engine (Weichai 170 HP vs Weichai 188 HP), Price (₹75 – 90 Lakh vs ₹70 – 85 Lakh), Operating Weight (17,622 kg vs 16,950 kg), Weight (17622 kg vs 16950 kg). The other 8 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
Shantui DH16B3
₹75 – 90 Lakh
SEM 818F
₹70 – 85 Lakh
Particulars
Shantui DH16B3
SEM 818F
SEM 818F vs Shantui DH16B3: which construction dozer suits your site?
The SEM 818F has more engine power than the Shantui DH16B3, and it carries a bigger blade too, at 4.3 cubic metres against 3.22 cubic metres. The 818F also turns in a tighter circle and comes with a multi-shank ripper built in as standard, ready for hard or unpredictable ground. The DH16B3 is the heavier machine, with a bigger fuel tank and a six-way adjustable PAT blade that angles and tilts for finishing work. It also sinks less on soft ground, since its ground bearing pressure is lower than the 818F's, and its blade drops deeper below ground level for digging out low spots.
Both machines fall under the construction dozers category, so the pick often comes down to the ground you work on. Sites with hard or mixed soil, where ripping matters, favour the 818F and its standard ripper. Sites with soft or freshly filled ground, or work that needs frequent blade angling, favour the DH16B3. Browse the wider dozer range or the bulldozer guide before you decide between the two brands.
SEM 818F
Pros:
More engine power at 188 HP
Bigger blade at 4.3 cubic metres, moves more material per pass
Ripper comes built in as standard, ready for hard or mixed ground
Tighter turning radius, useful on small sites
More ground clearance at 400 mm
Cons:
Higher ground bearing pressure, sinks more on soft ground than the DH16B3
Smaller fuel tank at 410 litres
Fixed SU/S blade, less adjustable than the DH16B3's PAT blade
Shantui DH16B3
Pros:
Lower ground bearing pressure, sinks less on soft ground
Six-way adjustable PAT blade for angling and finishing work
Bigger fuel tank at 432 litres for longer shifts
Blade drops deeper below ground level, useful for digging out low spots
Wider track shoes than the SEM 818F
Cons:
Less engine power at 170 HP
Heavier machine than the SEM 818F
No ripper option listed, so it stays limited to grading and pushing
Wider turning radius, needs more room on a tight site
Pros:
Cons:
Closing Recommendation
Both are mid-size construction dozers, but they are built for slightly different ground. The SEM 818F brings more engine power, a bigger blade and a ripper that comes standard, so it is ready the day hard or unknown ground shows up. The Shantui DH16B3 spreads its weight better on soft ground and gives the driver a fully adjustable blade for careful grading and finishing passes. Neither machine is clearly bigger or better, so the choice comes down to your typical ground conditions and the kind of blade work you do most. So match the machine to your work: SEM 818F for harder or mixed ground where a built-in ripper and more power help, Shantui DH16B3 for soft ground and finishing-grade work where blade adjustment matters more.
Shantui DH16B3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
Agency review
Planning to buy the Shantui DH16B3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the SEM 818F Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
SEM 818F vs Shantui DH16B3: which construction dozer suits your site?
The SEM 818F has more engine power than the Shantui DH16B3, and it carries a bigger blade too, at 4.3 cubic metres against 3.22 cubic metres. The 818F also turns in a tighter circle and comes with a multi-shank ripper built in as standard, ready for hard or unpredictable ground. The DH16B3 is the heavier machine, with a bigger fuel tank and a six-way adjustable PAT blade that angles and tilts for finishing work. It also sinks less on soft ground, since its ground bearing pressure is lower than the 818F's, and its blade drops deeper below ground level for digging out low spots.
Both machines fall under the construction dozers category, so the pick often comes down to the ground you work on. Sites with hard or mixed soil, where ripping matters, favour the 818F and its standard ripper. Sites with soft or freshly filled ground, or work that needs frequent blade angling, favour the DH16B3. Browse the wider dozer range or the bulldozer guide before you decide between the two brands.
SEM 818F
Pros:
More engine power at 188 HP
Bigger blade at 4.3 cubic metres, moves more material per pass
Ripper comes built in as standard, ready for hard or mixed ground
Tighter turning radius, useful on small sites
More ground clearance at 400 mm
Cons:
Higher ground bearing pressure, sinks more on soft ground than the DH16B3
Smaller fuel tank at 410 litres
Fixed SU/S blade, less adjustable than the DH16B3's PAT blade
Shantui DH16B3
Pros:
Lower ground bearing pressure, sinks less on soft ground
Six-way adjustable PAT blade for angling and finishing work
Bigger fuel tank at 432 litres for longer shifts
Blade drops deeper below ground level, useful for digging out low spots
Wider track shoes than the SEM 818F
Cons:
Less engine power at 170 HP
Heavier machine than the SEM 818F
No ripper option listed, so it stays limited to grading and pushing
Wider turning radius, needs more room on a tight site
Pros:
Cons:
Closing Recommendation
Both are mid-size construction dozers, but they are built for slightly different ground. The SEM 818F brings more engine power, a bigger blade and a ripper that comes standard, so it is ready the day hard or unknown ground shows up. The Shantui DH16B3 spreads its weight better on soft ground and gives the driver a fully adjustable blade for careful grading and finishing passes. Neither machine is clearly bigger or better, so the choice comes down to your typical ground conditions and the kind of blade work you do most. So match the machine to your work: SEM 818F for harder or mixed ground where a built-in ripper and more power help, Shantui DH16B3 for soft ground and finishing-grade work where blade adjustment matters more.
Shantui DH16B3 Vs SEM 818F Dozer Price, Technical Specifications & Features
The Shantui DH16B3 is a 17.6-tonne construction crawler dozer powered by a 170 HP engine. Its 3.22 m³ blade handles regular grading, while the 288 kN drawbar pull gives useful pushing force through compacted fill. The six-way adjustable blade lets operators change angle and pitch according to the work. Ground bearing pressure is 52 kPa, helping the machine remain stable on freshly worked construction ground. A rated 30-degree gradeability supports sloped-site applications. There is no dedicated ripper configuration, so the machine remains focused on grading and pushing. A 432-litre fuel tank supports a full working shift, and ground clearance is 370 mm. The DH16B3 sits close to Shantui's SD16E and DH17B3, making the specification differences important when selecting between them. Road-base preparation, drainage and access-road work are suitable applications. The Shantui DH16B3 bulldozer price is ₹75 lakh to ₹90 lakh. A civic works contractor can consider this dozer machine when regular grading is the main requirement. Its adjustable blade provides useful control without requiring a separate finishing machine. Buyers working on predictable construction ground can make use of its pushing strength and blade adjustment. The DH16B3 is a practical mid-size crawler dozer for regular site work.
At 16.9 tonnes, the SEM 818F crawler dozer carries a 188 HP engine. That's more power relative to weight than several machines in its class. It's the lightest of SEM's three construction dozers sold here. The 824F and 822D both step up considerably in weight and blade volume. That makes the 818F the value entry point into SEM's range. Per pass, the blade shifts up to 4.3 m³ of solid grading volume. A multi-shank ripper penetrates to 590 mm on this model. It comes as a mandatory attachment, not an afterthought. The ripper isn't optional here, unlike most competing models. That fits land-clearing and road-base work well. Soil conditions aren't always known in advance on those jobs. Bearing pressure comes in at 57 kPa, and a rated 30-degree max slope keeps it usable. Sloped and mixed-ground sites aren't a problem here. A 410-litre fuel tank supports a full working shift. It's aimed at contractors who expect harder ground on site. The SEM 818F bulldozer price is ₹70 lakh to ₹85 lakh. A land-clearing developer working sites with unpredictable subsurface conditions gets one less variable to worry about. The ripper is already built in.
69 differ · 8 identical
Key highlights: Shantui DH16B3 vs SEM 818F Dozer
Shantui DH16B3
SEM 818F
Engine Make
Weichai WD10
Weichai WD10G190E214
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
288 kN
NA
Fuel Tank
432 L
410 L
Overall Width
3300 mm
3167 mm
Track Shoe Width
560 mm
510 mm
Ground Bearing Pressure
52 kPa
57 kPa (STD)
Blade Options
PAT std (six-way adjustable)
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
NA (machine length quoted without ripper; ripper spec not stated)
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Key highlights: Shantui DH16B3 vs SEM 818F Dozer
Shantui DH16B3
SEM 818F
Engine Make
Weichai WD10
Weichai WD10G190E214
Rated Engine Power
127 kW (170 HP) @ 1800 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
900 Nm @ 1400-1600 rpm
NA
Max Forward Speed
10 (0-10) km/h
8.0 km/h
Max Drawbar Pull
288 kN
NA
Fuel Tank
432 L
410 L
Overall Width
3300 mm
3167 mm
Track Shoe Width
560 mm
510 mm
Ground Bearing Pressure
52 kPa
57 kPa (STD)
Blade Options
PAT std (six-way adjustable)
SU/S; S-LGP 3.24; U 5.6; S-WH 8.2; SU-FR 6.0 (m3)
Ripper
NA (machine length quoted without ripper; ripper spec not stated)
Multi-shank parallelogram; no pitch adjustment (mandatory attachment group); penetration 590 mm; 1434 kg
AC Cabin
NA
Standard
Warranty
12 Months
12 months / 2000 hrs
Full specifications: Shantui DH16B3 vs SEM 818F Dozer
Engine
26825
26819
Model
Weichai WD10
Weichai WD10G190E214
Fuel
Diesel
Diesel
Type
NA
Mechanically controlled diesel
No. of Cylinders
6
NA
Piston Displacement
9.7 L
NA
Rated Engine Power
127 kW (170 HP) @ 1,800 rpm
140kW (188 HP) @ 1900 rpm
Maximum Torque
900 Nm @ 1,400-1,600 rpm
NA
Transmission
26825
26819
Transmission Type
Independent dual-circuit electronic-control hydrostatic (Linde), stepless variable speed, mono-lever control
Questions buyers ask about the Shantui DH16B3 vs SEM 818F
Ans.
The SEM 818F has more engine power. It is rated at 188 HP against 170 HP on the Shantui DH16B3. That extra power gives the 818F more push through its bigger blade on a typical grading pass.
Ans.
The Shantui DH16B3 sinks less. Its ground bearing pressure is lower than the SEM 818F's, even though the DH16B3 is the heavier machine. That comes down to its wider tracks spreading the weight over more ground.
Ans.
Yes. The SEM 818F ripper is a mandatory attachment on this model, reaching 590 mm into the ground. The Shantui DH16B3 does not list a ripper option, so it stays focused on grading and pushing rather than breaking ground.
Ans.
The SEM 818F turns tighter. Its minimum turning radius is 3,700 mm against 3,900 mm on the DH16B3. On a cramped yard or a tight access road, that smaller circle matters.
Ans.
The Shantui DH16B3 blade is more adjustable. It is a PAT, or Power Angle Tilt, blade with six-way adjustment, built for finishing and grading work. The SEM 818F uses a fixed SU/S blade style instead, matched to its standard ripper setup.
Ans.
The SEM 818F has more ground clearance, at 400 mm against 370 mm on the Shantui DH16B3. That helps a little when crossing uneven ground or low mounds on site.
Shantui DH16B3 Vs SEM 818F - Compare Price & Availability Across 600+ Locations in India
Compare Shantui DH16B3 Vs SEM 818F price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
