LiuGong B230 vs Zoomlion ZD220-3: the two differ on 51 of 77 listed specs. The main differences are Engine (Cummins 230 HP vs Weichai 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.40 Cr), Operating Weight (24,540 kg vs 23,400 kg), Weight (24540 kg vs 23400 kg). The other 26 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
* Ex-factory price ranges are indicative for Oct 2026 and change with variant, city and offers; confirm with the dealer. On-road cost adds transport, RTO, insurance and accessories. Disclaimer
The comparisons provided are based on the technical specifications published by the respective OEMs on their official websites and brochures. Please confirm these details directly with the OEMs before making any final decision.
Key Highlights
LiuGong B230
Zoomlion ZD220-3
LiuGong B230
VS
Zoomlion ZD220-3
Dozer
LiuGong B230 vs Zoomlion ZD220-3: the two differ on 51 of 77 listed specs. The main differences are Engine (Cummins 230 HP vs Weichai 217 HP), Price (₹1.10 – 1.30 Cr vs ₹1.20 – 1.40 Cr), Operating Weight (24,540 kg vs 23,400 kg), Weight (24540 kg vs 23400 kg). The other 26 specs are the same.
Specs from OEM brochures · comparison updated Sep 2026
LiuGong B230
₹1.10 – 1.30 Cr
Zoomlion ZD220-3
₹1.20 – 1.40 Cr
Particulars
LiuGong B230
Zoomlion ZD220-3
LiuGong B230 vs Zoomlion ZD220-3: two big construction dozers, close in size
The LiuGong B230 and the Zoomlion ZD220-3 sit close together in size, and both share the same 3,725 mm overall width. But the B230 leads on the numbers that decide daily output: 230 HP against 217 HP, 24,540 kg against 23,400 kg, and a 7.8 m³ blade against 6.4 m³. The ZD220-3 answers with a lower ground bearing pressure, so it sinks less on soft ground. Both run conventional powershift transmissions rather than a hydrostatic drive, and neither lists a standard ripper, so both stay focused on pushing and grading.
Choose the B230 where the job needs the biggest blade and most pushing power in this size class, backed by a Cummins engine serviced across India. Choose the ZD220-3 where you already work with Zoomlion equipment elsewhere in your fleet, or where its slightly smaller footprint fits the site better. Both are construction dozers in our dozer range. Compare more pairs on the dozer comparison hub, or read the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the ZD220-3's 217 HP
Bigger blade at 7.8 m³, moves more material per pass
Slightly heavier at 24,540 kg, giving more mass for pure pushing power
Publishes a maximum torque figure of 1,050 Nm, a spec the ZD220-3 does not list
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it stays a pure pushing and grading machine
No published drawbar pull figure to compare directly against the ZD220-3
Higher ground bearing pressure at 83.1 kPa, sinks more on soft ground than the ZD220-3
LiuGong's dozer-specific dealer support in India runs thinner than its loader business
Zoomlion ZD220-3
Pros:
Rated drawbar pull of 178 kN is published in its specifications
Lower ground bearing pressure at 71 kPa, sinks less on soft ground than the B230
Slightly lighter and more compact at 23,400 kg
Zoomlion's expanding Indian presence across cranes and concrete equipment can suit existing fleet relationships
Runs the widely available Weichai WD10 engine platform
Shares the same 3,725 mm overall width as the B230, so transport planning stays similar
Cons:
Slightly less powerful at 217 HP than the B230
Smaller blade at 6.4 m³, moves less material per pass
No ripper option listed on this configuration
Zoomlion's dozer line has a shorter field history in India than more established brands
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice where the job needs the biggest blade and the most pushing power in this size class, backed by a Cummins engine that is easy to service across India. The Zoomlion ZD220-3 suits buyers who already work with Zoomlion equipment elsewhere, or who want a very close, slightly lighter alternative in the same size class. So match the machine to your work: LiuGong B230 for the biggest blade and most pushing power in this class, Zoomlion ZD220-3 for buyers already invested in the Zoomlion brand.
LiuGong B230 Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
Agency review
Planning to buy the LiuGong B230 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
Planning to buy the Zoomlion ZD220-3 Dozer in India? Get the best price, EMI & finance options, and delivery timelines by submitting a quick enquiry.
LiuGong B230 vs Zoomlion ZD220-3: two big construction dozers, close in size
The LiuGong B230 and the Zoomlion ZD220-3 sit close together in size, and both share the same 3,725 mm overall width. But the B230 leads on the numbers that decide daily output: 230 HP against 217 HP, 24,540 kg against 23,400 kg, and a 7.8 m³ blade against 6.4 m³. The ZD220-3 answers with a lower ground bearing pressure, so it sinks less on soft ground. Both run conventional powershift transmissions rather than a hydrostatic drive, and neither lists a standard ripper, so both stay focused on pushing and grading.
Choose the B230 where the job needs the biggest blade and most pushing power in this size class, backed by a Cummins engine serviced across India. Choose the ZD220-3 where you already work with Zoomlion equipment elsewhere in your fleet, or where its slightly smaller footprint fits the site better. Both are construction dozers in our dozer range. Compare more pairs on the dozer comparison hub, or read the bulldozer guide.
LiuGong B230
Pros:
More powerful at 230 HP against the ZD220-3's 217 HP
Bigger blade at 7.8 m³, moves more material per pass
Slightly heavier at 24,540 kg, giving more mass for pure pushing power
Publishes a maximum torque figure of 1,050 Nm, a spec the ZD220-3 does not list
230 HP Cummins NT855 engine, widely serviced across India
Cons:
No ripper option listed, so it stays a pure pushing and grading machine
No published drawbar pull figure to compare directly against the ZD220-3
Higher ground bearing pressure at 83.1 kPa, sinks more on soft ground than the ZD220-3
LiuGong's dozer-specific dealer support in India runs thinner than its loader business
Zoomlion ZD220-3
Pros:
Rated drawbar pull of 178 kN is published in its specifications
Lower ground bearing pressure at 71 kPa, sinks less on soft ground than the B230
Slightly lighter and more compact at 23,400 kg
Zoomlion's expanding Indian presence across cranes and concrete equipment can suit existing fleet relationships
Runs the widely available Weichai WD10 engine platform
Shares the same 3,725 mm overall width as the B230, so transport planning stays similar
Cons:
Slightly less powerful at 217 HP than the B230
Smaller blade at 6.4 m³, moves less material per pass
No ripper option listed on this configuration
Zoomlion's dozer line has a shorter field history in India than more established brands
Pros:
Cons:
Closing Recommendation
The LiuGong B230 is the steadier choice where the job needs the biggest blade and the most pushing power in this size class, backed by a Cummins engine that is easy to service across India. The Zoomlion ZD220-3 suits buyers who already work with Zoomlion equipment elsewhere, or who want a very close, slightly lighter alternative in the same size class. So match the machine to your work: LiuGong B230 for the biggest blade and most pushing power in this class, Zoomlion ZD220-3 for buyers already invested in the Zoomlion brand.
LiuGong B230 Vs Zoomlion ZD220-3 Dozer Price, Technical Specifications & Features
The LiuGong B230 is a 24.5-tonne construction crawler dozer powered by a 230 HP engine. Its 7.8 m³ blade is the main reason to move up from the smaller B160C, as it can shift substantially more material per pass. There is no ripper listed, keeping the machine focused on pushing and grading. Drawbar pull reaches 178 kN, while ground bearing pressure is 83.1 kPa. This makes firmer ground a better fit than soft freshly turned fill. A 480-litre fuel tank supports full-shift bulk earthwork, and ground clearance is 405 mm. Large site-development and highway earthwork are suitable applications where blade capacity directly affects output. The LiuGong B230 bulldozer price is ₹1.10 crore to ₹1.30 crore. Contractors handling large plots can consider this machine when the B160C no longer provides enough material movement per pass. Its operating weight places it near the upper end of construction crawler dozers. The B230 can therefore provide additional output without moving fully into mining equipment. Buyers should compare expected daily cut volume against the smaller model before selecting it. For highway contractors and large site-development projects, this dozer machine offers a straightforward setup focused on pushing, spreading and grading work.
The Zoomlion ZD220-3 is a 23.4-tonne construction crawler dozer with a 217 HP engine. Its 6.4 m³ blade gives it considerably more material-moving capacity than the ZD160-3. Drawbar pull reaches 178 kN, while ground bearing pressure is 71 kPa for standard construction ground. There is no ripper listed for this configuration, so the machine remains dedicated to grading and pushing. Rated gradeability of 30 degrees supports sloped-site applications. A 400-litre fuel tank supports a full working shift, and 400 mm of ground clearance suits regular construction conditions. The ZD220-3 is the larger of Zoomlion's two listed construction dozers. Highway work and large-plot development can benefit from the additional blade volume. The Zoomlion ZD220-3 bulldozer price is ₹1.20 crore to ₹1.40 crore. A highway contractor can consider this machine when daily material movement has become more important than compact size. Buyers can compare the larger blade against the additional operating weight before choosing it over the ZD160-3. For projects involving broad grading areas, this dozer machine can reduce the number of passes required. It provides a larger construction option without moving into mining-class equipment and remains focused on regular earthwork, spreading and site preparation.
51 differ · 26 identical
Key highlights: LiuGong B230 vs Zoomlion ZD220-3 Dozer
LiuGong B230
Zoomlion ZD220-3
Engine Make
Chongqing Cummins NT855C280S20
Weichai WD10G220E23
Rated Engine Power
172 kW (230 HP) @ 2000 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
1050 Nm @ 1400 rpm
NA
Max Forward Speed
11.82 km/h
11.2 km/h
Max Drawbar Pull
NA
178 kN
Fuel Tank
480 L
NA
Overall Width
3725 mm
3725 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
83.1 kPa
71 kPa
Blade Options
Straight (referenced)
Straight tilt (std)
Ripper
NA
NA
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Key highlights: LiuGong B230 vs Zoomlion ZD220-3 Dozer
LiuGong B230
Zoomlion ZD220-3
Engine Make
Chongqing Cummins NT855C280S20
Weichai WD10G220E23
Rated Engine Power
172 kW (230 HP) @ 2000 rpm
162 kW (217 HP) @ 1850 rpm
Maximum Torque
1050 Nm @ 1400 rpm
NA
Max Forward Speed
11.82 km/h
11.2 km/h
Max Drawbar Pull
NA
178 kN
Fuel Tank
480 L
NA
Overall Width
3725 mm
3725 mm
Track Shoe Width
560 mm
560 mm
Ground Bearing Pressure
83.1 kPa
71 kPa
Blade Options
Straight (referenced)
Straight tilt (std)
Ripper
NA
NA
AC Cabin
NA
NA
Warranty
12 months / 2000 hrs
12 months / 2000 hrs
Full specifications: LiuGong B230 vs Zoomlion ZD220-3 Dozer
Engine
26815
26817
Model
Chongqing Cummins NT855C280S20
Weichai WD10G220E23
Fuel
Diesel
Diesel
Type
Turbocharged, air-to-air aftercooled
4-stroke, water-cooled, turbocharged, direct injection
No. of Cylinders
6
6
Piston Displacement
14.0 L
9.726 L
Rated Engine Power
172 kW (230 HP) @ 2,000 rpm
162 kW (217 HP) @ 1,850 rpm
Maximum Torque
1,050 Nm @ 1,400 rpm
NA
Transmission
26815
26817
Transmission Type
Power shift
Planetary power shift, hydraulically actuated
Torque Converter
Yes (power shift)
3-element, single-stage, single-phase
Speeds (F/R)
3F / 3R
3F / 3R
Max Forward Speed
11.82 km/h
11.2 km/h
Max Reverse Speed
14.3 km/h
13.2 km/h
Final Drive
NA
Spur gear, double reduction
Performance
26815
26817
Max Drawbar Pull
NA
178 kN
Gradeability
NA
30 °
Min Turning Radius
NA
NA
Steering & Brakes
26815
26817
Steering Type
NA
Wet multiple-disc, spring loaded, hydraulically boosted
Brakes
NA
Wet contracting band, foot operated
Undercarriage
26815
26817
Suspension
NA
Semi-rigid equalizer bar
No of Bottom Rollers
7
7
No of Top Rollers
2
2
Track Shoes (Each Side)
39
38
Track Shoe Width
560 mm
560 mm
Grouser Height
NA
NA
Track Gauge
2,840 mm
2,000 mm
Ground Contact Area
NA
NA
Ground Bearing Pressure
83.1 kPa
71 kPa
Dozer Blade
26815
26817
Standard Blade Type
Straight
Straight tilt
Blade Capacity
7.8 m³
6.4 m³
Blade Width x Height
3,725 x 1,395 mm
NA
Max Lift Above Ground
1,210 mm
NA
Max Drop Below Ground
540 mm
NA
Blade Tilt Adjustment
735 mm
NA
Blade Options
Straight (referenced)
Straight tilt (std)
Ripper
26815
26817
Ripper Availability
NA
NA
Hydraulic System
26815
26817
Hydraulic Pump
NA
Gear pump
Maximum Flow
NA
NA
Relief Pressure
NA
NA
Blade Control
NA
NA
Machine Weights
26815
26817
Operating Weight
24,540 kg
23,400 kg
Weight Basis
As stated (configuration basis not specified)
As stated (configuration basis not specified)
Static Dimensions
26815
26817
Overall Length
6,880 mm
5,546 mm
Overall Width
3,725 mm
3,725 mm
Overall Height
3,510 mm
3,403 mm
Min. Ground Clearance
405 mm
400 mm
Service Capacities
26815
26817
Fuel Tank
480 L
NA
Engine Oil
45 L
NA
Engine Coolant
79 L
NA
Hydraulic System
110 L
NA
Transmission System
122 L
NA
Final Drive (Each Side)
82 L
NA
Operator Environment
26815
26817
Operator Station
Cab (as pictured)
Cab (as pictured)
AC Cabin
NA
NA
Monitoring
NA
NA
Full specifications: LiuGong B230 vs Zoomlion ZD220-3 Dozer
Engine
LiuGong B230
Zoomlion ZD220-3
Model
Chongqing Cummins NT855C280S20
Weichai WD10G220E23
Fuel
Diesel
Diesel
Type
Turbocharged, air-to-air aftercooled
4-stroke, water-cooled, turbocharged, direct injection
No. of Cylinders
6
6
Piston Displacement
14.0 L
9.726 L
Rated Engine Power
172 kW (230 HP) @ 2,000 rpm
162 kW (217 HP) @ 1,850 rpm
Maximum Torque
1,050 Nm @ 1,400 rpm
NA
Transmission
LiuGong B230
Zoomlion ZD220-3
Transmission Type
Power shift
Planetary power shift, hydraulically actuated
Torque Converter
Yes (power shift)
3-element, single-stage, single-phase
Speeds (F/R)
3F / 3R
3F / 3R
Max Forward Speed
11.82 km/h
11.2 km/h
Max Reverse Speed
14.3 km/h
13.2 km/h
Final Drive
NA
Spur gear, double reduction
Performance
LiuGong B230
Zoomlion ZD220-3
Max Drawbar Pull
NA
178 kN
Gradeability
NA
30 °
Min Turning Radius
NA
NA
Steering & Brakes
LiuGong B230
Zoomlion ZD220-3
Steering Type
NA
Wet multiple-disc, spring loaded, hydraulically boosted
Questions buyers ask about the LiuGong B230 vs Zoomlion ZD220-3
Ans.
The LiuGong B230 is more powerful, at 230 HP against the ZD220-3's 217 HP. It is also slightly heavier, at 24,540 kg against 23,400 kg, and carries a bigger 7.8 m³ blade against 6.4 m³.
Ans.
The Zoomlion ZD220-3 sinks less. Its ground bearing pressure is 71 kPa against the B230's 83.1 kPa. Neither machine is meant for very soft or wet fill, so check ground conditions with your dealer before deciding either way.
Ans.
Yes. Both the LiuGong B230 and the Zoomlion ZD220-3 have an overall width of 3,725 mm, even though their length, weight and blade capacity differ. That can matter for transport clearances on narrow roads or bridges.
Ans.
The Zoomlion ZD220-3 lists a rated drawbar pull of 178 kN. The LiuGong B230's drawbar pull is not published in its specifications, so buyers should judge its pushing force mainly from its weight and blade size instead.
Ans.
It can. Zoomlion has an expanding presence in India across cranes and concrete equipment, so fleet owners already dealing with the brand get one more machine on an existing commercial relationship, on top of the ZD220-3's own specifications.
Ans.
The LiuGong B230 runs faster, at 11.82 km/h against the ZD220-3's 11.2 km/h. The gap is small, since both use a similar three-speed powershift transmission and comparable gearing, so drivers moving between the two will feel little difference.
LiuGong B230 Vs Zoomlion ZD220-3 - Compare Price & Availability Across 600+ Locations in India
Compare LiuGong B230 Vs Zoomlion ZD220-3 price and availability across all major cities in India including Mumbai, Pune, Kolkata, Hyderabad, Chennai, Bengaluru, Delhi, Ahmedabad, Indore, Jaipur, Guwahati, and 600+ more locations.
Desi Machines is a platform where you can see and compare construction equipment. It showcases images, brochures, features, technical specifications, brand details & dealer information. All these are taken from respective brand websites, brochures, and other public resources. We do not claim ownership of these materials and strive to ensure their accuracy. However, the disparity may happen and we advise users to verify directly with respective brands and dealers. Desi Machines is not liable for any inaccuracies or reliance on the information provided. Use of this website is at your own discretion.
Excavator
294 models 
Backhoe Loader
51 models 
Crane
68 models 
Concrete Mixer
79 models 
Wheel Loader
54 models 
Compactor / Roller
45 models 
Motor Grader
42 models 
Dozer
41 models 
Concrete Pump
66 models 
Skid Steer Loader
11 models 
Telehandler
13 models 
